this is a review of the real grade gundam model kit, unicorn 02 banshee norn. This gundam is from the series mobile suit gundam unicorn
Пікірлер: 149
@goldenconvoy17256 жыл бұрын
you put the skirting armor on wrong you need to make sure pay close attention to the instructions
@titan13376011 ай бұрын
For those wondering, the Advance MS Joint used in RG kits is made out of two types of plastic: ABS and polypropylene. What I've notice while building RG kits and those MG emotion manipulator hands is that you can't paint over the polypropylene plastic as the paint won't stick to it. You can only paint over the ABS plastic. To know whether if it's ABS or polyethylene, see if the part is attached to the runner. If it is, that's polypropylene plastic
@theofficialavenger6 жыл бұрын
Honestly I think the RG Unicorn is one of the best kits Bandai have put out period, it's just so brilliantly engineered to transform, articulate well, and be super sturdy all at once.
@hileif66282 жыл бұрын
omg hey sick pfp happy pride 🏳️⚧️🏳️⚧️🏳️⚧️
@drip671 Жыл бұрын
Trans
@shawnbriscoe13322 жыл бұрын
I love Banshee! Painting mine black. Will use water-slides. Thanks for the review!
@nightmare69metalmatt525 жыл бұрын
If i may suggest hit the inside of the psycho frame with silver makes it really pop even in low light
@raihanmiftah60764 жыл бұрын
I'm really glad that I got the "Unicorn Mode Box" version of this on sale
@bluspeed76 жыл бұрын
Had the same issue with the skirts falling off my unicorn until I pushed them in more. They will make a clicking noise and should be good to go. Love my Mg but this is far better and the 00 raiser was the best rg, this takes it.
@19MofuMofu6 жыл бұрын
I believe that the side skirt problem could be because the parts aren’t in all the way. I thought the same for the rg unicorn until i actually saw mecha gaikotsu’s review and now they never come off.
@vyaraalarie4 жыл бұрын
I found that if the the skirt armor keeps popping off, then it's not clipped deep enough into the ball joint
@longloco16 жыл бұрын
Just built it this week, the frame is so tight that i broke the right elbow when trying to loosen the frame, still but still had fun and that arm still holding the beam magnum so not big of a deal
@andrewestrada65316 жыл бұрын
I have the real grade unicorn and I'm loving it!!! ^^
@nightmare69metalmatt524 жыл бұрын
Now we need a mg 2.0 unicorn with that extra plastic for the eye piece for the unicorn mode
@patrickyeary11 ай бұрын
The hip skirts need to be attached horizontally and they will click in better. The exact way it shows in the manual
@akaraikiriakatsuki31576 жыл бұрын
Sir, when did you obtain a good camera? It's. Really nice. What camera are you using now?
@Zetagundamastley12196 жыл бұрын
To me, the RG Unicorn is MUCH better than the MG. I have both kits btw, and my RG is more solid and it’s easier to pose for me since I loosened up the joints. The side skirts on my kit don’t fall off, and I did enjoy the decals. But hey, it’s my opinion, and currently my favorite RG (even though I currently only have 3, the other two being the GP01fb and the Sinanju)
@guillotinegundam12336 жыл бұрын
Zetagundamastley1219 what is up
@guillotinegundam12336 жыл бұрын
Zetagundamastley1219 what gunpla are you gonna review next
@Zetagundamastley12196 жыл бұрын
GRX 97-1 gundam I’m reviewing the HGBF Cherudim SAGA next.
@user-lt5lw8cd6y6 жыл бұрын
Zetagundamastley1219 But doesn't the smaller size bother you?
@Zetagundamastley12196 жыл бұрын
G Doesn’t bother me at all. I own an equal amount of 1/100s and 1/144s. All I do is place them at different areas of my shelf.
@KasperAura6 жыл бұрын
How did you put on the skirts? In the manual if you pop them on up, it eventually clicks in and holds its position well. I made the mistake of putting them on down.
@CE73KiraYamato6 жыл бұрын
I built the RG Unicorn and i had no issues building it Also built the MG and i gotta say RG was WAY easier to build
@rjcheems30416 жыл бұрын
the skirt armors don't pop off....just fit it correctly and it'll be nice and solid
@isaacjuhel98282 жыл бұрын
Jabman there is nothing wrong with the skirting I have recently built one. If you hold the skirt piece horizontally to the waist push it on then fold it down. It will secure so snug only force will remove it again.
@ms_dezign4 жыл бұрын
which better MG or RG banshee? still confused between these two
@dodrio10006 жыл бұрын
I ve buil tthe unicorn rg and the skirt is solid, either there is a fault on your version or the piece is not completely in, making them fit is a pain in the ass since the stub move to the side when pushin in also, the shoulder require about 10 to 20 spins each before building. I use my teeth to latch the joint when spinning it since is a lot more versatile and more adjustable than any plyers basicly bitting the black part near the base and spinning the arm like a wrench. I'm waiting on mine to arrive.
@MrFlunkorg6 жыл бұрын
I own the RG banshee norn and unicorn and can confirm that Jabman is correct about the side skirts on the norn. They really don't like staying on and you can't really snap them in like the unicorn.
@bobbyde_pressed40236 жыл бұрын
The skirts have a slide in and lock down system. So it right and it should never pop off. Do it wrong then the issues will happen.
@nightmare69metalmatt526 жыл бұрын
excellent review but get the unicorn yes yes u have a ton but the rg unicorn is damn near flawless
@HybrydATP646 жыл бұрын
I can already see the normal banshee as a p-bandai release as well as the green psycho frame ver same with the unicorn OR like the bande dessine a limited edition release
@SiegeSpace6 жыл бұрын
Hybrydatp64 actually I think the normal banshee will be a standard limited release like the bande dessinee unicorn but the color variants mos likely be p bandai.
@HybrydATP646 жыл бұрын
SiegeSpace yeah i guess but i would prefer if they color variants are a standard release
@mechalinkergaming71695 жыл бұрын
Armed Armor VN and BS are PB add-ons. In essence, OVA Banshee is PB.
@zacharymalvar48586 жыл бұрын
awesome banshee
@HybrydATP646 жыл бұрын
I need dis boi to go along my rg unicorn
@CD-Gaming Жыл бұрын
I think I can see why the thing is £60 now, double the also RG Mk. II and around about the same as my RG Hi Nu, jus for perspective for those not in the UK! Still cheaper than two Gundam Universe figures, though! The RG Banshee or RG Hi Nu? Yes!
@sk8nuget5 жыл бұрын
I like the black unicorn but I just hate ensign riddhe so that’s kinda why I haven’t purchased any Norn kits except for the destroy mode which Marida pilots
@DearOctave5 жыл бұрын
Marida piloted the Banshee though, not the Norn. if I remember correctly of course.
@racer1646 жыл бұрын
Are you gonna get the mg deep striker
@suyo33806 жыл бұрын
Bacon is better with psychoframe?
@hks0716 жыл бұрын
Did ur shield keep coming off?
@amsyarzawir46476 жыл бұрын
Im very tempted to pick up this kit but it wont fit in my other kits because I only collect MG so far
@SiegeSpace6 жыл бұрын
Amsyar Zawir it's better than the mg version it still would be worth getting.
@xxnike0629xx6 жыл бұрын
@Amsyar Zawir MGs are great, but RGs have that 'je ne sais quoi' to them. But overall I do think that MGs are better. It's just that when you get an RG for the first time and build it, you definitely can see some hints of MG design, but it's done differently where you can appreciate it and admire it. If you've never bought an RG, I suggest you try one out. I'm sure by now there's at least 1 RG of a mobile suit that you like right?
@xxnike0629xx6 жыл бұрын
@Amsyar Zawir But in terms of the Mobile Suit Gundam Unicorn kits, I think that overall the best choices are the RG and PG. The MG kits are okay but from reviews I've seen and read, they generally have a lot more issues than fans want. The only big issue with the RG kits is the tight shoulder joint and that's about it. The PG is basically *perfect* from what I hear from reviews, but the problem is like with all PGs the price is a bit expensive and they take up *a lot* of space. I hope that helps. ^_^
@christmasisawesome93486 жыл бұрын
Trust me, MG unicorn suxxx
@xxnike0629xx6 жыл бұрын
@Christmas Is Awesome I wouldn’t say the MG sucks but from reviews I’ve read and seen it’s more like it had a lot of poor design choices that ultimately created lots of frustration. But before it was the best representation of it in model kit form. Now there’s the RG and MG version that’s a better representation. So as of now, unless you only want the MG then go for the MG. But if you want an overall better experience go with the RG and or PG.
@jordancobb28556 жыл бұрын
What about the white RG Unicorn Gundam?
@GuntPulp6 жыл бұрын
*I just built the best RG kit in the EW Tallgeese*
@wesker9194 жыл бұрын
1:21 That WHAT gave me Rich Evans flashbacks.
@Lightoffivestars6 жыл бұрын
Those skirts won't fall off if you pushed them in completely...which is kind hard to do. Well, I think those arms are way too tight. If you don't handle them extremly careful, it will break...personal experience xD other than that it's a perfect RG to me
@gunplanut6 жыл бұрын
If you want a good Banshee try the PG.
@LohenArc6 жыл бұрын
FIRST! Also Bansheeeeeee!!!
@sinanjubaron12746 жыл бұрын
oi this thing surpasses the mg in every way
@DJL3966 жыл бұрын
RB_Unit MKII Except the size, which is the only good thing for the MG.
@sinanjubaron12746 жыл бұрын
Damar Laksono i guess
@GundamFan5206 жыл бұрын
And the aesthetics. The RG doesn't look as accurate to the Anime in comparison to the MG.
@mechalinkergaming71696 жыл бұрын
GundamFan520 Not accurate? Other than the different colors, this is anime accurate.
@GundamFan5206 жыл бұрын
I don't think you read my comment accurately. I didn't say its not accurate to the anime. I said it doesn't look accurate to the anime when compare to the MG and PG. The RG has weird body proportions that does not look that great (Big shoulders, small chest that not compensate the shoulders, V-Fin and wider XC.) Those nit-picks aren't a big deal, its just a little turn off from this kit for me... even tho I have it.
@twistedmechanix21066 жыл бұрын
I think I’d get the MG before I get this. This looks awesome, but I feel like I’d get way too frustrated with all these little parts.
@SiegeSpace6 жыл бұрын
Twisted Mechanix I would get this version mostly because it is better if not as good in terms of detail to the mg and is cheaper. Plus this version is way more stable.
@xxnike0629xx6 жыл бұрын
@Twisted Mechanix Based on reviews, I'd say that the RG version is better than the MG counterpart. The RG has better proportions and details and it is cheaper to purchase. Also, it looks like the RG is more stable and not as floppy or have parts that pop out easily. The transformation seems to work better on the RG version too. Just watch out for the shoulder since it's very tight on the RG.
@twistedmechanix21066 жыл бұрын
I might get it eventually if it truly deserves the praise people give it, but I’m not the biggest fan of the RG line simply because I’ve had terrible luck with them staying together
@xxnike0629xx6 жыл бұрын
@Twisted Mechanix To each their own. So far though I’ve been getting the RG kits from Mobile Suit Gundam 00 (my favorite series) and Build Fighters. I am aware some RG are very finicky.
@Zetagundamastley12196 жыл бұрын
I’d suggest staying away from the MG; it’s pretty loose, articulation is rubbish for MG standards, and parts fall apart. I myself has had great luck assembling RGs (Unicorn, GP01fb, and I’m currently building the Sinanju). I used to be a 100% MG guy, but I soon came to love RGs and even HGs.
@argoth2316 жыл бұрын
Really gonna need wateralides. Those stickers stick out real bad
@KathyaVazquez Жыл бұрын
3:55 Legos be like:
@Gunpla_shrimp3 жыл бұрын
You put the skirts on wrong, if you do it right they're rock solid
@ReRoute256 жыл бұрын
Metallic Unicorn, you mean Phenex?
@EbullientSMP6 жыл бұрын
Yeah MG Unicorn gets too much of a bad rap, I still think the RG is the better kit overall but neither are that bad of options.
@EbullientSMP6 жыл бұрын
I dunno mine's a rock. I pose mine without a base just fine.
@xxnike0629xx6 жыл бұрын
@jabman025 Well from the Mobile Suit Gundam Unicorn, we have RGs of: - MSN-06S Sinanju - Expansion Set for RG Sinanju - MSN-06S Sinanju (Metallic Gloss Injection Ver.) - RX-0 Unicorn Gundam - RX-0 Unicorn Gundam [Premium `Unicorn Mode` Box] - RX-0 Unicorn Gundam Ver.TWC - RX-0[N] Unicorn Gundam 02 Banshee Norn - RX-0[N] Unicorn Gundam 02 Banshee Norn [Premium `Unicorn Mode` Box] - RX-0 Unicorn Gundam (Bande Dessinee Ver.) That's what a lot already. It's too bad that this RG still has a super tight shoulder joint like the RG RX-0 Unicorn Gundam since I presume many people either have broken that part or stressed the plastic. Besides that, I think it's safe to say that the RG version is probably the better than the HG and MG in terms of quality (besides the super tight shoulder). At this point, I think for fans, your best choices are the RG and PG versions. So between those, I think more people will choose the RG version based mostly on the MSRP difference between an RG and PG, and also the size difference. Odds are, I think we'll eventually see an RG release for (be it through P-Bandai or not): - RX-0 Full Armor Unicorn Gundam [Red] - RX-0 Full Armor Unicorn Gundam [Green] - RX-0 Unicorn Gundam 02 Banshee - RX-0[N] Unicorn Gundam 02 Banshee Norn [Final Battle Ver] - RX-0 Unicorn Gundam 03 Phenex ...and probably other obscure event type or company type of release like ANA or the [CODE 852] variant.
@mechalinkergaming71696 жыл бұрын
ANA and CODE 852 won't probably be P- Bandais since they are pretty much special editions. If they do so, they have to collaborate with ANA airlines and have another GunPla EXPO in Hong Kong.
@xxnike0629xx6 жыл бұрын
@Joeie Rivera True. I guess it'll get (if it does) a release new an expo, making it even more rare and hard to get than a P-Bandai. It doesn't matter to me since I'm not into UC and don't buy UC kits, but I know how difficult and expensive it can get to buy P-Bandai and also expo exclusive kits. With the Mobile Suit Gundam Unicorn series, it's probably more annoying than usual given how many variations Bandai releases through P-Bandai, GunPla Expo, and through C3xHobby.
@thehangarbay6 жыл бұрын
There's also a clear RG Sinanju that was an event exclusive.
@msn-04sazabi56 жыл бұрын
xxnike629xx You dislike UC yet you have UC kits in your box fortress and continues to talk about them, don't tell me you're a UC tsundere?! :O Speaking of box fortress, I can't wait to see a built masterpiece from yours truly, xxnike629xx a.k.a. suiton629, bow....
@myairjs6 жыл бұрын
Is it just me or are the proportions on the rg different than the mg. Mg looks real lanky to me.
@SiegeSpace6 жыл бұрын
myairjs the mg is a bit off in proportion probably because of the early transformation gimmick the had at the time.
@twilight_phantom29696 жыл бұрын
The rg shoulder pads are larger proportionally for the sake of transformation at this scale.
@muisverriet6 жыл бұрын
Wireless_Phantom Plus the original art for the Unicorn had the huge shoulderpads as well.
@4kva4 жыл бұрын
you really need to pay more attention for the stickers its not sticked on properlly
@robmcmuffin84536 жыл бұрын
Is it better than the Sinanju RG kit?
@mechalinkergaming71696 жыл бұрын
Rob Mcmuffin WHAT DO YOU FUCKING THINK? IT'S THE BEST GODDAMN RG MATE
@robmcmuffin84536 жыл бұрын
Joeie Rivera alright then! Guess I'll have to pick this up then. Thank you!
@paraclonebasedtrooper82256 жыл бұрын
wait its really that hard? I only build it in one day with the unicorn... and it wasn't that hard its a straight up build.. I thought it was normal like the RX 78 2 and the char zaku..
@MrFlunkorg6 жыл бұрын
From what I understand, Jabman has very large hands.
@paraclonebasedtrooper82256 жыл бұрын
MrFlunkorg probably.. I mean what lock mechanism and why its hard? its the same thing as the unicorn but different color scheme and backpacks
@jabman0256 жыл бұрын
the correct term is giant man hands
@Pikminer-50876 жыл бұрын
jabman025 the reason the skirts fall off is because you didn't pop it on right. You need to insert the parts from the skirt's top. That will fix this problem
@supajjbano6 жыл бұрын
Can you make this into the normal banshee?
@mechalinkergaming71696 жыл бұрын
jj bano Technically, by changing the collar and removing the Armed Armor set as well as the Revolving launcher, you can get the vanilla Banshee from the novel.
@Zetagundamastley12196 жыл бұрын
Sadly there’s no parts to make the normal Banshee from the OVA.
@MushaGundamMKIII6 жыл бұрын
I hear so many good things about the RG Unicorn, but since Bandai doesn’t wanna give us the superior versions of the designs, I still haven’t picked them up. Not getting one of these things until they give us the regular Banshee. I don’t need to pollute my shelf with this Norn trash.
@SiegeSpace6 жыл бұрын
I don't think it's trash I like all of the forms of the banshee. I just think they should release the options as separate kits not full build kits. Like the armed armor de that is pretty much a waste of a kit.
@slavinben44846 жыл бұрын
I dare you to get the real grade zeta Gundam
@Zetagundamastley12196 жыл бұрын
Slavin Ben Oh boy I think Jabman is going to snap if he builds and reviews that.
@slavinben44846 жыл бұрын
Zetagundamastley1219 or have it built with JobbytheHong. Oh boy
@SiegeSpace6 жыл бұрын
We don't need him hating real grades right when they are starting to improve.
@Zetagundamastley12196 жыл бұрын
Slavin Ben Haha, that’ll make a hilarious review because from what I know, the worse the figure is, the funnier his reviews are. Just look at his Bold Forms Gladius review, that was by far the funniest review I’ve seen from him.
@slavinben44846 жыл бұрын
SiegeSpace true but he did go insane over the master grade re-gz
@jadenandres82384 жыл бұрын
Banshee Norn was my first kit and it wasn’t that hard
@linkkicksu6 жыл бұрын
I'd get it if it wasn't the Norn
@SiegeSpace6 жыл бұрын
puhfrugherter try getting the bande dessinee unicorn rg version it's eventually the same minus the backpack and v fin
@linkkicksu6 жыл бұрын
I already have the standard RG Unicorn and wanted the Banshee to display with it. But the Norn has that silly giant fan backpack thing and doesn't have the claw weapon. I wouldn't be as bothered if this kit came with the standard unicorn backpack parts on the runners but it also doesn't have the claw weapon or that folding beam gun.
@-blank-57674 жыл бұрын
Bro u should try RG NU gundam da best RG kit and has a god like articulation
@farisahadsulistyoharianto78665 жыл бұрын
Suuuuuuuuuuuuperr tight
@TekkaSage6 жыл бұрын
Holy crap the decals are garbage.
@reiamuro75156 жыл бұрын
Imagine this tech used for an mg unicorn 2.0. Same as the sinanju, that would have been the best gunpla of all time. Rg line sucks. Microscopic details. No playability.. no shelf presence. And geez. Of course this will be better than the.mg. rg's were developed using research and tech from existing pg and mg. Downsized and crammed to 1/144 scale. An exploding fucking piece of mess. A "bite more than you can chew" grade line.
@SiegeSpace6 жыл бұрын
Rei Amuro they are improving them this kit is probably the most solid rg in the entire line. And get used to seeing them because there will be even more down the road.