Transforming this 1949 Ford model car which which was abandoned for many years

Рет қаралды 311,101

2 жыл бұрын

i am restoring this 1949 Ford model car which which was abandoned the hard part was making the door and interior of this model car i made everything (doors interior cars mirrors by myself)
❤WATCH NEXT:
Abandoned Model Car Restoration • Car Covered In Rust Wa...
satisfying LaFerrari Model Car • Extremely Rare Model C...
This Restoration Will Make You Relax • Reviving a Classic: Re...
Range Rover Evoque Model Car Restoration • Can I really Restore T...
Lamborghini Urus Model Car Restoration • Satisfying Restoration...
AEC Van Model Truck Restoration • Fully Damaged Truck Re...
Abandoned Model Car Restoration • Car Covered In Rust Wa...

Пікірлер: 170

@robertdragoff6909 Жыл бұрын

I appreciate the work you did to make replacements for the doors and the back seat cushion…. Amazing door inside panels. All over a great job….

@diemaschine2287 Жыл бұрын

Would like to see your videos where you destroy the cars. Everyone.. well anyone with common sense can tell this was made to look abandoned so you could “restore” it. I actually like the abandoned look. Like it was a legit junkyard car. Can you show videos where you prep the vehicles for your restore videos?

@MsMarcow 6 ай бұрын

It looks like someone ruined and aged this model on purpose - it's not an old model and the patina is artificial

@countesscable Жыл бұрын

I think these restorations are fantastic, but I can’t help feeling there has been some help in making the item look really bashed up to make the restoration more spectacular 🤔

@Fawteen Жыл бұрын

Gee, ya think?

@CortxVortx Жыл бұрын

Ha! You didn't know my brothers!

@savneetsinghrairai6823 2 ай бұрын

All staged

@michaelgoble8200 29 күн бұрын

@@savneetsinghrairai6823 I think these negative comments are staged. Maybe your whole life is staged and you are not who you think you are.

@obivankeno2068 Жыл бұрын

The whole car body are slightly twistwed ,especialy down and front hood.The color of peinture terrific.Try again to realign the whole body

@zeeldaazoonk Жыл бұрын

I agree !

@aramrius7740 7 ай бұрын

Completely agree. Poor quick job.

@kennyburkhead9080 Жыл бұрын

My grandparents had an old 49 Ford and now that I think of it, the color was an old brown color. Loved that old car.

@tjwilly Жыл бұрын

Looks as tho it was purposely damaged/aged to make the video.

@murrayandru7527 Жыл бұрын

49 Ford this car saved Ford after WW2

@normataylor3124 7 ай бұрын

Great makeover for the simple tools and supplies you used

@oscaraguirre602 Жыл бұрын

Good nigth congrautlations,,, Great job in this model,,, all an luxe With the colors ancient,,, but the work result in special spirit,,, Realy for enjoy to see your video,,, Thanks and have a good time,,, your friend Oscar de Playa del Carmen Q R México,,,

@ShortRestorations Жыл бұрын

Many thanks!

@mariajoseguisado3043 4 ай бұрын

Absolutamente espectacular y la puerta, increíble, trabajas maravillosamente bien, saludos desde Madrid

@alexishart364 4 ай бұрын

I made mine full scale model all white mostly including the interior and also White wall hub cap tires chrome details on the vehicle 👍

@stephenpowell5912 Жыл бұрын

Great Job giving it back a life it had when it was left and found in a mangled Condition,Now it looks like it has come off the factory production line ❤️❤️❤️❤️Some fiddly bits and pieces here to give it that authentic look ,Well done ❤️Love the remastered look and looks beautiful again for a 1950s car.❤

@davidmartinlopez9524 Жыл бұрын

1 € restauracion de 🔟..gracias por los subtitulos en castellano,un saludo desde Barcelona.

@6banzai5 Жыл бұрын

patient imaginative work. nice.

@vanpenguin22 Жыл бұрын

Truly inspiring

@anghoangvan3906 Жыл бұрын

So meticulous. Thanks . Have a nice day.

@jerryjohnson4618 6 ай бұрын

Awesome restoration 💯👍👍

@Shr3dd3r2k8 Жыл бұрын

For future consideration, try using insulation foam to carve up things like seats. Much easier to work with, and would be really easy to add 3d details to, like the beaded stitching from the seats.

@jeffthevideoguy23 Жыл бұрын

I have a 2008 Honda Civic that needs a restoration!

@Toystorations Жыл бұрын

I love the custom work you did on this. Not a bad looking car for a Maisto. I wonder if the AMT Showboat model kit parts would fit on this.

@valborchardt3596 Жыл бұрын

Very nice, thank you

@DaimlerSleeveValve Жыл бұрын

Who did you get to pre-distress the model? The "scratched paint" was UNDERNEATH the plastics which would have protected the surface, and even INSIDE.

@Blove0130 Жыл бұрын

Yes this model does appear to be distressed to make it look old. I don’t like videos that fake it.

@savneetsinghrairai6823 2 ай бұрын

I got a Lamborghini Aventador same scale n diecast .....some parts can be made but hard to make complex parts

@adelaluz Жыл бұрын

In general you ve done a very good job, may be you should. have streched the car, becuse its frame is still bent in the middle, such a nice detail in the wood work, I like the car because it. represented the design after the war, and. before the. trend. to turn cars into big wide space ships

@donaldmacdougall1600 Жыл бұрын

Just wish someone would take it to the next level with working headlights and taillights we have the technology today we can make them better ❤

@mauricelegrand6924 3 күн бұрын

Impressionnant, maîtrise et patience. Félicitations

@chha6439 Жыл бұрын

Great job

@bricomecanique5724 Жыл бұрын

très joli travail

@dorahinojosa6610 Жыл бұрын

AWESOME Job 👍👍👍👍👍

@ShortRestorations Жыл бұрын

Thanks for the visit

@VijayKumar-es7th 2 жыл бұрын

Great work

@ShortRestorations 2 жыл бұрын

Thank you so much 😀

@donaldhenke2750 Жыл бұрын

where can i find a couple parts for that model? please

@quinho4166 11 ай бұрын

Só a cor que não ficou muito agradável, mas, no geral, o trabalho ficou ótimo...! Parabéns....

@3rdoldhen Жыл бұрын

A dental water pick helps with cleaning crud out of tiny crevices!

@MariaIsabel-db1tp 3 ай бұрын

Lindo 👍👏👏👏👏👏

@jamesschrom317 Жыл бұрын

1949 Ford "Shoe Box" nice.

@larryweaver1530 Жыл бұрын

I don't know, he did a nice job on that door. It's not easy duplicating parts like that.

@MarcosMinieri-bl6ju 9 ай бұрын

Por favor fale os produtos usados

@nelsontriana5397 2 ай бұрын

This is the must amazing restoration of a model car I ever saw and the door you made that was so cool thanks for you jube

@ShortRestorations 2 ай бұрын

Thank you very much!

@jamesshea2712 2 жыл бұрын

Awesome job

@ShortRestorations 2 жыл бұрын

Thanks!

@jamesshea2712 2 жыл бұрын

@@ShortRestorations your welcome

@pofrof4910 Жыл бұрын

Amazing job.

@hairychest7865 Жыл бұрын

isn't there a tool that looks like a c-clamp you can use to flatten out metal like those at around 10:15?

@GettingNervous Жыл бұрын

Uh, what a bad paint job. The rear bumper is mounted upside down, the whole chassis is bent.................

@larrykrise3609 Жыл бұрын

wow!awsome work sir.very nice

@ShortRestorations Жыл бұрын

Thank you! Cheers!

@hamadalsaad399 5 ай бұрын

From 1$ to 5$ maximum sry

@michaelrini3654 Ай бұрын

I think it would make for a better story if you showed the model being broken up! Looks like more work than rebuilding!

@budulay163sanders2 Жыл бұрын

Кузов просевший, петли сделаны слабо. А так респект!

@dariodarecki Жыл бұрын

Napracowałeś się co doceniam ,jednak końcowy efekt mógłby być lepszy. Myślę że źle dobrałeś kolor nadwozia , bordowy moim zdaniem byłby lepszy. Pozdrawiam

@Diecast_Roof Жыл бұрын

Amazing Job and good luck ❤

@ShortRestorations Жыл бұрын

Thank you! You too!

@Richard56er Жыл бұрын

It's still bent in the middle. the front end doesn't line up with the back end.

@user-jb9ky6sm3f 5 ай бұрын

Мне одному кажется что выровнять кузов было бы не лишним?

@user-Bartos Ай бұрын

Стапеля для кузовного ремонта нет у него. Вот и не ровнял.

@kenbowersox33 Жыл бұрын

I wonder why it has front disc brakes, were they around then? And yes, great job!

@daviddarby6986 Жыл бұрын

Very little about that replica is authentic. No disc brakes, and the engine wouldn't be blue.

@endall6783 Жыл бұрын

Good job was the body bend up on each end? Looked that way to me or it could have been just me.

@raulcarneiromendoza668 Жыл бұрын

Felicitaciones

@javiercoliboro Жыл бұрын

es un placer

@jonwinder3219 Жыл бұрын

I have a tool like the twisted shank screwdriver you used in this video. This is the only one I have seen other than mine. Plese let me know who makes these tools. Thank you. I enjoyed the video very much. Especially seeing the tools you use.

@ShortRestorations Жыл бұрын

i made it

@tombarlow6176 Жыл бұрын

What a wonderful restoration and the making of missing parts

@anitathompson261 Жыл бұрын

That was awesome sooo cool thanks for sharing have a wonderful blessed day today in Christ Jesus our wonderful savior Jesus Christ bye 😊

@troynewly Жыл бұрын

Very nice!

@user-gancata Жыл бұрын

Работа хорошая, но кузов авто продавлен по центру - это главный недочёт.

@obivankeno2068 Жыл бұрын

Happy to observ just like me

@francoisbouchard602 Жыл бұрын

Good.job😄👍👍👏👏👏cool

@billhyde2303 Жыл бұрын

The rear bumper is upside down, the bumper guards should point up.

@otakulrgamer827 2 ай бұрын

cool nice job ....man

@suelyparentesouza Жыл бұрын

❤️

@RestorationAustralia Жыл бұрын

cool 😊

@albertmartinez6621 Жыл бұрын

IT LOOK LIKE IT WAS GOING TO BE A TUFF JOB BUT YOU MADE IT LOOK EASY GREAT JOB

@AmpasaurusWrecks Жыл бұрын

This model looks so real… it looks as if there was even oil leaking out of the bottom of the engine😀

@richardmumford2708 2 ай бұрын

OK so you remove the front subframe and one shock goes with it .then remove the second shock with your pin pliers ...why is there a 3rd shock ?

@georgeshelton6281 14 күн бұрын

I also awaited to see this one if you noticed. It's another old-timer roadster. Nonetheless, it has to be restored.

@TheGeezzer Жыл бұрын

$25.00 car maybe. No way is it going to reach 500 bucks!

@thijsversteeg9010 Жыл бұрын

A magnificent restoration. But the way you made the missing parts yourself, could be better.

@davidmartinlopez9524 Жыл бұрын

Todo sea criticar..¡¡cojonudo!!

@chicosilva5534 Жыл бұрын

👏👏👏👏👏👏👏👏👏👏👏👏

@bernardsicard1991 Ай бұрын

Bonjour, pourriez-vous me procurer le nom du fabricant de cette voiture? Merci d'avance. Hello, could you get me the name of the manufacturer of this car? Thank you in advance.

@valdeci9017 Жыл бұрын

Esse é o carro do Rabugento ? O cão detetive ?

@NicVermaeren 7 ай бұрын

knap gedaan

@josuemelendezamezcua8541 Жыл бұрын

🖐🏻🤔👍

@fafnir-fasolt Жыл бұрын

Why do you not show the engraving on the floor panel, so we can see who it made and when. The brutal dismantling with a pliers is a pain to watch and prone to break something. I guess the model is not older than twenty years.

@waddsbadds Жыл бұрын

At 1:23 you can see that it's made by Maisto. It shouldn't be too difficult to find out when they made this model

@evic2209 Жыл бұрын

$500.00? come on

@klupeeteable Жыл бұрын

nice job,, but the car is bent !!

@elcioalvaro4098 Жыл бұрын

Qual escala dessa miniatura amigo

@susie.goodwin1356 10 ай бұрын

DAYUMM, I don't think I've ever done several WTF per minute of a resto video... Not one thing of this "resto" made sense... Let alone boost the value on this model. 🤦🏻‍♂️

@donaldcampbell5277 Жыл бұрын

Why is it dirty on top and like new underneath?

@juanvaldez2921 2 ай бұрын

Because its a fake video. He destroys them and then fixes them.

@katelynandjoshy3961 2 ай бұрын

Great restoration and reconstruction of parts, However, not an $850 worth car. I mean this is no 1920's Buddy L, Steelcraft, Metalcraft or Wyandotte car. Great job non the less.

@chha6439 Жыл бұрын

Would’ve been nice to know what you used to clean up the car…

@caroldebeaussaert8971 21 күн бұрын

you need a sand blaster

@jeffmech1 Ай бұрын

You need to sharpen your drill bits

@sho.sho.4216 Жыл бұрын

ومواهب اطفال وموهي

@michaelgoble8200 Ай бұрын

In normal text, the dollar sign comes first. $1.00 $800.00.

@raywilson800 Жыл бұрын

⭐⭐⭐

@ratroddiesels1981 Жыл бұрын

museum quality resto mod

@RetroJack Жыл бұрын

Looks good, but not $500 good.

@leximatic 2 ай бұрын

I liked the wreck better.

@bobsmithinson2050 Жыл бұрын

All these intricate ways of making doors and panels but you couldn’t be bothered to simply bend the car straight again?

@ronnieb5468 Жыл бұрын

Ugh 😮u really need to step up ur tool game brosuph,lol ,and screw up vice to the table, it came out nice tho , ....not 500$ nice ..but still nice 👌 practice makes perfect "KEEP ON KEEPIN ON " 😊