Real-time drone(running Betaflight) tracking on a map - using a Bluetooth connection to Crossfire TX

Рет қаралды 5,746

2 жыл бұрын

If you want to track in real-time your drone or if you're going to spot the area of a crash or the location of an emergency landing visually, then this video is for you.
All the configuration steps are presented in this video to achieve the previously presented goals.
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ → bit.ly/3arWvOq
╠╗║╚╝║║╠╗║╚╣║║║║║═╣ I Really Appreciate Your Support!
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝

Пікірлер: 20

@samavella8831 2 жыл бұрын

Can you please tell me what app you are using on the phone? Thanks for the great video

@silat3796 Жыл бұрын

watched most of your videos. can you make a tutorial how to mission plan on rc boat ? (autonomous boat.

@humbertomontalban3932 2 жыл бұрын

Does the bluetooth update with the tx module or is a separate update?

@samavella8831 2 жыл бұрын

Thank you for a very informative video. What app are you using on the phone to track the quad? Thank you.

@i3Drones 2 жыл бұрын

From the Google store the "Telemetry Viewer".

@samavella8831 2 жыл бұрын

@@i3Drones Thank you very much!

@samavella8831 2 жыл бұрын

Thanks again for your help. I do have another question! I have the TBS Crossfire LITE Module and I don’t see a settings for the Frequency section where you choose the Bluetooth

@i3Drones 2 жыл бұрын

@@samavella8831 I set the "region" to "open" in order to be able to select if it is necessary a specific frequency. If you selected, for example, Region to 2 (America) the frequency is set to 915 automatically and you do not have the option to manually select.

@samavella8831 2 жыл бұрын

@@i3Drones Sorry wrong question question. It’s the Bluetooth that I can’t find, and when I did some more looking on the web, I will not be able to do this because the TBS Lite Module does not support Bluetooth only the full version does. If I may, I would suggest that next time at the start of your video you mention the prerequisite hardware for being able to do what you are about to show, so that people ares aware!

@mw8151 Жыл бұрын

Hmm I wonder if you can connect a laptop to the bt /wlan model and send mavlink messages back to the drone eg. To use dronekit on the laptop. Would be amazing with this range.

@i3Drones Жыл бұрын

Yes you can do it. There is only a problem Betaflight is not designed to receive commands form a based station. To do this you need PX4 or Ardupilot.

@mw8151 Жыл бұрын

@@i3Drones cool, i use a pixhawk with ardupilot on a rover so should be fine👍

@velardeduardo 2 жыл бұрын

very good video, do you know any application for iphone that does the same?

@i3Drones 2 жыл бұрын

Short, no. I do not have an iphone, so I was not in the situation to test it on such device. But, I received the same question on the Facebook and I searched but up to now I do not fined one. Sorry!

@velardeduardo 2 жыл бұрын

@@i3Drones txs for the answer…regards