Real Time: Signet Ring Part 1

Рет қаралды 12,028

Күн бұрын

This is part 1 in a series of 3 videos on how to make a signet ring in copper.
Supplies you will need:
20g copper sheet
Torch
Hard solder
Jeweler's saw
Hand files
Calipers
Ruler
Paper
This isn't necessarily a beginning project, but I encourage beginners to try it. The more you practice the better you'll get.
I hope you enjoy the video!
Cheers,
Julessa

Пікірлер: 38

@Nancy4133nope 2 ай бұрын

Fantastic video learned a lot from watching it. Thank you for posting

@JulessaScofieldMetalsmith Ай бұрын

Thank you so much! 😀

@annabellemohamed7802 17 күн бұрын

This is so helpful! Thank you:)

@JulessaScofieldMetalsmith 16 күн бұрын

Glad it was helpful!

@kevinf6927 Жыл бұрын

Thank you so much

@JulessaScofieldMetalsmith Жыл бұрын

☺️ thank you!

@JayDub_143 3 жыл бұрын

Thank you so much Julessa!!! Great tutorial as always and just what I needed. Cant wait for part 2!🙏💖🙏

@JulessaScofieldMetalsmith 3 жыл бұрын

You are so welcome!

@chantayphommaxay4982 Жыл бұрын

I love your job.

@JulessaScofieldMetalsmith Жыл бұрын

Thank you! 😊

@ghagtfhagty1351 2 ай бұрын

mrci

@krautgirl65 2 жыл бұрын

this is a great way to make a signet ring!...thank you for making it much simpler to put together....i am well on my way!

@JulessaScofieldMetalsmith 2 жыл бұрын

🙌🏻👍🏻

@kimberleyjewers140 Жыл бұрын

Thanks for details that many leave out, I have 2 of these to make but will be using sterling silver and setting stone and extra embellishments to band. watched about 10 artists doing this but going back to yours...

@JulessaScofieldMetalsmith Жыл бұрын

Thank you so much Kimberley! Let me know if you have questions 😊

@nileshmore2735 2 жыл бұрын

Super

@JulessaScofieldMetalsmith 2 жыл бұрын

Thank you Nilesh! 😁

@jankellogg265 2 жыл бұрын

Great video.

@JulessaScofieldMetalsmith 2 жыл бұрын

Thank you Jan! I’m glad you enjoyed it!

@alexandrevlaemynck9432 Жыл бұрын

hi, thank you for your tips ;)

@JulessaScofieldMetalsmith Жыл бұрын

🥰

@alexandrevlaemynck9432 Жыл бұрын

@@JulessaScofieldMetalsmith ;)

@ghagtfhagty1351 2 ай бұрын

❤❤

@JulessaScofieldMetalsmith 2 ай бұрын

Thank you 😁

@bethtopper2797 Жыл бұрын

Love this tutorial! Curious if you ever made a video to make tapered signets? Or how to change your measurements to make this design tapered? Let me know! Thank you so much.

@JulessaScofieldMetalsmith Жыл бұрын

Thank you Beth! I have not made a video for the tapered version of a signet ring yet, but I do have it on my list of “to-do” videos. And 2023 will have lots of new tutorials! I’m settled into the new place and it’s time to get back on the horse and film so stay tuned.

@blackietotheend Жыл бұрын

Could one use copper pipe , as opposed to making the ring from sheet copper?

@JulessaScofieldMetalsmith Жыл бұрын

Yes, you definitely can assuming you can find the right size to match the inner diameter for a ring size.

@hermanparisius784 2 жыл бұрын

Love it thanks! I thought I needed to quench and clean before second round of solder bec of firescale? But it seems fine? What if you need more soldering quench and clean than or just keep adding?

@JulessaScofieldMetalsmith 2 жыл бұрын

Definitely quench and pickle to get the best joins. Copper is much more forgiving than silver so if you can get into the habit of cleaning between solder operations, you’ll have a lot less frustration! 🙂

@chuonglubao1845 2 жыл бұрын

Thks so much

@JulessaScofieldMetalsmith 2 жыл бұрын

You’re so welcome! 🤗

@nicwaymire Жыл бұрын

What type of solder is this that matches the color of copper?

@JulessaScofieldMetalsmith Жыл бұрын

In this demo I am using copper solder purchased from Rio Grande, but normally I would use regular silver solder and then disguise it by plating it with copper from my pickle pot. 😃

@jaredschrock5270 3 жыл бұрын

Hi there. I have 22 gauge sterling silver, and would like to make a size 9 ring. Can you tell me how long I need to make the templates? Thank you for your time, and have a great day.

@JulessaScofieldMetalsmith 3 жыл бұрын

I use a specific formula that works for me every time. Measure the thickness of the metal in mm. Find out the diameter of a size 9 ring (should be around 18.9 or so mm). If you have a size 9 ring already somewhere, use your calipers to get the inside diameter. Then add the thickness to the diameter times pi (3.14) and that should give you the length you need to make a size 9. If the ring is wider than 4mm, you'll want to add 0.5mm to the total length of the blank to get the right size for the width. Also, I would recommend not going thinner than a 18g for a men's ring if you have it. It will hold up longer and will be less likely to break. Especially if this is the ring you plan to put the diamond in. Hope this helps!

@ghagtfhagty1351 2 ай бұрын

🍒

@ghagtfhagty1351 2 ай бұрын

bravo madam