Not a lot of reviews on it like this one. This gonna blow up
@studennison13 жыл бұрын
I like how you go into detail. Beautiful horse you have. My last one out of 6 was a Bullitt. Will be purchasing the 2016 GT Premiun thanks to you! 👍
@onohan4 жыл бұрын
God your car sounds so good. I'm glad you're enjoying the setup! Please keep it up!
@1heBoy4 жыл бұрын
instant sub. Keep putting on for us 2nd gen guys 💪
@nightmareonanystreet93293 жыл бұрын
Dope content and you hit that 2-3 shift on point no Granny shifts
@dylanthusing62114 жыл бұрын
Bro your GT looks so aggressive i love it. Great content bro 💪👊👍
@JohnMichael-kt1ro4 жыл бұрын
Love ur vids bro
@edgarsantos80304 жыл бұрын
Please do a vid on how to downshift 😭 your downshifts are super clean!!
@Real6speed4 жыл бұрын
gotchu bro👌🏽
@mattsantos32934 жыл бұрын
many different ways to downshift!! gotta find which one fits u best bro ! i personally use the heel toe rev match almost time I downshift ,
@landonerickson38504 жыл бұрын
definitely something you feel out and learn what works best for you!
@moisescristobal97403 жыл бұрын
It’s all about experience
@JP_designs154 жыл бұрын
I see ya famo!! throwin mine on when i get back to tha crib!! 💪🏾💪🏾
@Hobson923 жыл бұрын
Good vid man, looking to do to mine soon!
@Adam_A04 жыл бұрын
Sounds sick! Got a manifold in the mail for my 15. Already on Lund tune so just gonna get em to update it for that. Can't wait
@quel_s55024 жыл бұрын
I just installed my ported manifold myself pretty easy install only mods i have are jlt cai xpipe muffler delete with this ported manifold in auto haven't done a pull yet its been raining crazy
@jeffp99324 жыл бұрын
Awesome !
@WhoisAustin3 жыл бұрын
Forsure my Fav mustang youtuber
@angelreyes-kv7jk4 жыл бұрын
Love the car bro can’t wait to get my 5.0!!
@SkullcrusherGamingTV4 жыл бұрын
When I had my 2017 GT I had a non-ported 18 manifold. I loved it, it pulls hard up top. When I first installed I had issues with IMRCs and didn’t figure it out until two weeks later.
@FJTabb4 жыл бұрын
Whats an IMRC? I'm bout to pull the trigger and get a ported mani for my 16 GT
@angelobarnette4 жыл бұрын
Dat shit 🔥 bro.
@gdubs06524 жыл бұрын
What up Bro! I have the same set up with LT headers and a tune your gonna love that pull!! Different level.
@FJTabb4 жыл бұрын
I'm about to go ahead and pull the trigger. I have long tubes on mine as well with air aid intake. Mine is a 16, are you all using the stock throttle body or an upgraded one
@drewparker9684 жыл бұрын
Looking great brotha! What brand are those louvers? they look so good, i need them for mine lmao
@R0cketRed3 жыл бұрын
Hey bro I got the 17 gt and I'm looking for ppl that r like u n me that love our gen 2's. Do more videos on pimping out your car, it gives us ideas on what to do with ours. I see u got the powerstop rear calipers what do you think of them. I was super close to buying some recently, I actually pulled the trigger but the sale wouldn't go through. Any info on upgrades you've done that you really like lmk! Thx again great video. What did u end up spending on the Ported 18 manifold?
@douglasbaker59492 жыл бұрын
How you like those rear windscreen louvers? Love the look ever since I saw them on the Mustangs in the late 60s and early 70s. The aluminum ones look so much better.
@fiyui31504 жыл бұрын
Yooo great video
@charleskillerc4 жыл бұрын
The video Go crazy bro
@charleskillerc4 жыл бұрын
When's the next video bro?
@dirtydanimal95524 жыл бұрын
thats a dope ass intro
@rican_5oh3 жыл бұрын
Almost identical to mine minus the manifold. Will be doing a ported 18 manifold soon also.
@FullThrottlePerry3 жыл бұрын
this the video that's finalizing my deal lol thanks bro
@jordankb19874 жыл бұрын
Dude, you are making me a Mustang guy REAL quick! dam, your set up is nice! Keep up the content, do you have a Instagram i can follow?
@CoyoteMar3 жыл бұрын
Vids are 🔥🔥
@alanjimenez16044 жыл бұрын
Would you say the tq loss down low is noticeable with the 18 ported intake? And or does the top end power just outweigh it? On the fence about getting a ported intake or keeping my stock one cuz of the low end tq
@bl4d3runn3rX4 жыл бұрын
The steering wheel is awesome. Where did you get that?
@4567chuck4 жыл бұрын
What’s up!! I’m in the Chicago subs and just got a new mustang! I have a 392 charger for a little longer to. Hope to meet you one day!
@enriquevalle53184 жыл бұрын
You killin it with these videos man🔥 What short throw shifter you recommend bro?
@Real6speed4 жыл бұрын
Barton short throw shifter, that’s what I have and I love it! And thank you for watching, I really appreciate that bro✊🏽
@Hallowwolfofficial3 жыл бұрын
Hey appreciate the video but I have a 2020 intake manifold that I want to get ported for my 2015 50 year gt where did you get yours ported?
@mattsantos32934 жыл бұрын
Was literally boutta say pls go wash that bihhhh upp😭 than 45 secs later u go “ but first lemme wash her up”🤣
@ElCuzo_Lifestyle4 жыл бұрын
damnnn bro lol what’s your shift points?? 👀 Clean whip!
@Reggiestreet3 жыл бұрын
Good shifting
@Garciax004 жыл бұрын
What kind of headlights do you have? Hids? Or led?
@TheANGELS2754 жыл бұрын
Just about to by mine bro perfect timing !
@TheANGELS2754 жыл бұрын
Buy**
@chrisgolomb59654 жыл бұрын
That's a sick ass cover photo
@ElvisCarReviews4 жыл бұрын
Nice ride
@davestartsman15103 жыл бұрын
Very nice, can tell it was hot, you were so excited on your first run. Question, did you change over your injectors when you installed the 18 manifold? If not, have you changed since the 18 manifold went on? Any difference w/ new injectors/
@Real6speed3 жыл бұрын
In this particular video i was still on the stock injectors, but i installed the 47 lb injectors once i switched over to e85. Ported manifold paired with e85 and new injectors, the car woke up to a complete different level.
@toofastbran80114 жыл бұрын
Did you need a bigger throttle body or you using stock one ?
@Mba.Kam.10 ай бұрын
Where did you get your ported manifold from
@s550steve64 жыл бұрын
Where did you get your manifold man?
@zurdotrains4 жыл бұрын
What’s the difference between ported and non ported?
@whtlyg73774 жыл бұрын
Nice car! Have you replaced your oil pump gears and crank sprockets yet? Im told its a good idea especially with this manifold and the higher rpm's
@mikehughes80234 жыл бұрын
Genesis Whitley Not necessary for this set up. If you’re going for big boost (650hp or more) then yes that is a must have.
@danielarroyo75502 жыл бұрын
Why would you need oil pump gears on a na setup lol
@Bigphatfish503 жыл бұрын
Yo that shit was on point. I’m looking at the 5.2L voodoo for my 15 GT pp I hope my results are as good as yours bro.
@mikehughes80233 жыл бұрын
You doing an engine swap or just the intake manifold? If it’s just the intake you’re gonna have to use the GT350 throttle body and tune which lets you rev higher but you lose some low end torque.
@Bigphatfish503 жыл бұрын
Just gonna do the intake manifold I just replaced the ignition coils and plugs and still getting the same error along with with the camshaft position sensor error.
@fidelramos93803 жыл бұрын
Jaja he said 8th Gear jaja... no rpm 😂 good shit men 👍
@esta-stang5.053 жыл бұрын
You didn’t get the chop/cam sound with the tune?
@steviedwalls Жыл бұрын
Do you have to run 91 and up octane with this manifold? I’d imagine 87 is an option too.
@Myth1cxSniper4 жыл бұрын
How you hanging with stock 10 speeds?
@WhoisAustin3 жыл бұрын
How do you go past your redline my guy? I thot that was bad for it lmao
@saulmartinez90224 жыл бұрын
🔥🔥
@leaf-5studios4312 жыл бұрын
Where did you get your manifold from.
@gaivoron4 жыл бұрын
How much power you get with it?
@JohnMichael-kt1ro4 жыл бұрын
18 mani crazy man
@zidteachesitall3 жыл бұрын
Bruh your intro never makes meh bored...
@hemingwaythegreat6454 жыл бұрын
I just don't know what to say, It is absolutely destroying each gear... It just don't let it go lower than 7thousands RPMs, man this is crazy, now i want to take a ride in this nightmare
@Allan4PF4 жыл бұрын
car sounds sick bro. should get some roll races soon
@erichersom79674 жыл бұрын
GodlyTBE nice car
@allinracing89834 жыл бұрын
Is it cold there already ?
@Hashbrownxpress4 жыл бұрын
Whats up 6. What oil do you run in your car, 5w20 or 5w30? Give us a new vid!
@leaf-5studios4312 жыл бұрын
Always run 5w30.
@johndoe956 Жыл бұрын
What year is the mustang
@StevenNeidlein4 жыл бұрын
Whats your exhaust?
@antz19coyote733 жыл бұрын
Great mod for 11-17
@mikehughes80232 жыл бұрын
If you have a good tuner😎
@patrickgowdy76563 жыл бұрын
Port your throttle body as well and get spacers
@walkingzombie1534 жыл бұрын
What shop did u get it done at ? Trying to find a good shop in the chi to do mines
@Real6speed4 жыл бұрын
I didn’t go to a shop , me and my guy installed it in his garage.
@raminaser25994 жыл бұрын
Yo where that parking garage at for yo intro
@Hashbrownxpress4 жыл бұрын
Intro is dope as FUCK!!
@abdullahsameer90354 жыл бұрын
Stock clutch bro ?
@firehawk5.0764 жыл бұрын
We gotta link up ! I’m FBO
@davidroman13294 жыл бұрын
I'd like to run you I have Gt 350 intake manifold instead I'm in Northwest Indiana
@Kasakee24 жыл бұрын
I wanna get one for my 13 GT, how much difference do you notice?
@chriscooper82104 жыл бұрын
Have you considered a ported cj?
@leoxia34584 жыл бұрын
any issues or checking engine code pop out after using the lund racing tune? this is perfect pair with arh header
@Real6speed4 жыл бұрын
no issues at all, the Lund racing tune worked perfectly with this setup! The car runs perfectly.
@leoxia34584 жыл бұрын
@@Real6speed nice, whether u changed the fuel injector along with this install?
@leoxia34584 жыл бұрын
@@Real6speed which tuning u r running? 93 or e85? thanks
@ToxicatedValentine3 жыл бұрын
clean car!! You should do a video on your shifting. CLEAN AS FUCK!
@whippled5.0344 жыл бұрын
I have a 2019 so do you think my intake manifold is the same as your 18 manifold
@StevenNeidlein4 жыл бұрын
2018-2019 are the same manifold
@DivinityCustoms4 жыл бұрын
And his is 15-17 anyway so you know it’ll fit yours no problem 👌
@Yemetey-gf8yx3 жыл бұрын
Ported by whom?
@3star2nr3 жыл бұрын
Above 6000 the coyote gets savage
@2ksavagehere4234 жыл бұрын
We should race when I fix my 01 mustang
@Real6speed4 жыл бұрын
let’s do it!!
@Dr.Voodoo834 жыл бұрын
I gotta get a stang now
@Dr.Voodoo834 жыл бұрын
U gotta race a ss1le
@skipbrainless75272 жыл бұрын
Can you add this to a stock car or do you need a tune before installing or immediately after installing?
@joses30592 жыл бұрын
Need a tune to run this
@skipbrainless75272 жыл бұрын
@@joses3059 I’m planning on buying the tune same day as the mani can I install it and tune it right after same day basically? Even if it requires doing some data logging? Thank you
@joses30592 жыл бұрын
@@skipbrainless7527 yes you can install and tune right after to be drivable
@skipbrainless75272 жыл бұрын
@@joses3059 if you don’t mind me asking one more question. I will be purchasing the mani along with a tune soon for the gears I have a premium 17 gt auto I think those come with 3.15 and I I think in PP it comes with 3.55. When I purchase the tune I put in my own gear ratio?
@joses30592 жыл бұрын
@@skipbrainless7527 put in the gear ratio of your own vehicle
@bigandbad94 жыл бұрын
You flat foot shift fam ?
@Real6speed4 жыл бұрын
yeah at times lol
@sdfusped7383 жыл бұрын
Are you running lockouts and what gears do you have
@Real6speed3 жыл бұрын
yeah im using lockouts and 3.73 gears
@sdfusped7383 жыл бұрын
What is your Instagram ? I have a couple questions
@@Real6speed those flowmasters outlaws better than roush iyho?
@erikswoll74204 жыл бұрын
Wait till you go e85
@Sindvs12343 жыл бұрын
Bruh that's the suburbs not Chicago!!!!
@TheANGELS2754 жыл бұрын
Did you go auto mafia or 1320 junkie ?
@Real6speed4 жыл бұрын
www.teambeefcakeracing.com/2018manifold.html
@erikswoll74204 жыл бұрын
I’m tune with auto mafia e85 and my car it’s totally coyote
@arianamsperanza45253 жыл бұрын
This is an Air Flow Solutions Ported Intake Manifold sold through Team Beefcake Racing. Shout out to AFS #drivefasttakechances
@moisescristobal97403 жыл бұрын
I never seen someone drive a mt-82 like that 😂 always early shifting or grandma shifting since those mt-82 not that reliable
@leaf-5studios4312 жыл бұрын
2nd Gen MT82s are fine. Steel shift fork and just make sure you have good fluid. I run mine the same as his and I have no problems.
@thomasrouh22588 ай бұрын
You shouldn't have any coolant in that valley unless you disturbed a coolant line etc. That is not normal. A ported manifold is just polished up inside.....You need them actuators to run the IMRC flaps or you better install some kind of boost squeezing oxygen down that throat.....Or change out them gears.....I don't care who tunes that computer.....I would not install lockouts without boost.....These coyotes need IMRC running perfectly for the low end torque.....Ford engineers have spent a lot of time and money designing and testing these intakes.....If you had talked to Ford Performance techs they would have beat that into your head.....You are totally on your own when you do it the wrong way......I'm sure you've experienced issues from the lockouts with no boost....If you didn't you are lying.....