Reaper DAW 101 Part 5:- Stems, Rendering Regions and Time Saving
Рет қаралды 42,609
Күн бұрынInterested in the ULTIMATE course for Reaper? Where every little thing is covered? Check out our course here:- promixacademy.com/audio-cours...
If you haven't already seen parts 1 to 4 of this series, where we cover the basics, check out the playlist here:- • REAPER DAW Tutorials
Today we're looking into what happens when you need several files to be made as an output from your DAW all at once - whether this means that you need "stems" (multiple different tracks of the same piece) or regions (different periods of time), or even more complex options using the Region Render Matrix - it's all here in the tutorial of how to use rendering/bouncing properly.
TIMESTAMPS
0:00 - Intro
1:03 - Master Mix vs "Mastering"
2:20 - Master vs Stems
4:35 - The Render Window
14:11 - Exporting Stems
20:57 - Regions
27:10 - The Region Render Matrix
30:43 - The Render Queue
------
What gear to buy? We recommend interfaces, microphones, monitors and more at our Thomas (Europe) and Sweetwater (USA) links below
www.thomann.de/gb/thlpg_loh2r...
🍻 BUY US A BEER WITH PATREON!🍻
/ hoppolestudios
Thanks to our Patrons who made this possible - your names are at the end of the video. You make a huge difference!
📱 FOLLOW US HERE 📱
Facebook: / adamsteelproducer
Instagram: / adamsteelproducer
All links are affiliate links
#ReaperDAW #musictech #musicproduction
@adamsteelproducer 5 жыл бұрын
TIMESTAMPS:- 1:03 - Master Mix vs "Mastering" 2:20 - Master vs Stems 4:35 - The Render Window 14:11 - Exporting Stems 20:57 - Regions 27:10 - The Region Render Matrix 30:43 - The Render Queue
@craigdaubbeats-rapinstrume9185 4 жыл бұрын
Question, when you render stems, is it rendering them with any effects or automation that was applied? I noticed there was a noise shaper box on the render form you didn't cover.
@adamsteelproducer 4 жыл бұрын
Yes it does. Noise shaping is only relevant to dither though, which is a whole other topic and is largely academic at 24 bit
@craigdaubbeats-rapinstrume9185 4 жыл бұрын
@@adamsteelproducer Ok thanks. I was wondering about the mixer effects being applied because in older videos people were going through all kinds of extras steps to get the stems to render with effects and automation. I'm thinking of switching from FL to Reaper but I needed the option to render stems easily with all effects. Thanks!! Appreciate the fast response!🙏
@svenrudolflindgren1883 3 жыл бұрын
Your tutorials are among the best and easiest to understand. Don't know exactly what you do different, but it works! Thanks!
@plantypops6062 Жыл бұрын
Ooooh stems! Us plants love talking about stems! My stem is yellow, located atop my plantypops head attached to my lucky sprout 🌱
@swankiw_ 3 жыл бұрын
I've been bingeing your videos since i switched daw to reaper a few weeks ago, and i must say i owe you a drink for all these golden education. Cheers and wish you all the best man!
@gilora 6 ай бұрын
Thank you so much, Adam! Yr video has helped me immensely in rendering "regions".
@sebaslap 4 жыл бұрын
Loving these videos! Thanks again!
@ramayudhistira5371 5 жыл бұрын
Such an insightful tutorial. Thank you and subscribed.
@dawsondavidable 5 жыл бұрын
Very nice tutorial! Cheers!
@iaintwiddy6836 4 жыл бұрын
Very well explained, much appreciated!
@BeLuckyDaf 4 жыл бұрын
Love your tutorials, I don't understand why just 800 views, this is perfect.
@adamsteelproducer 4 жыл бұрын
Thanks :) I think it’s partly because it’s a new series. The views will go up, I’m sure!
@lapiz1990 3 жыл бұрын
Man! Thank you so much for this video! The best explanation I found for these resources in Reaper. Regards
@peterthomson7050 4 жыл бұрын
Hi Adam, thanks for these great vids. Reaper Mania is grand for getting a basic grasp of things. Your vids take the knowledge to the next level of learning. Muchas Grassy. Pete.
@V.G.A.M. 3 жыл бұрын
Thank you so much, very precise explanation. Learnt things which I was neglecting till now. God bless you
@DoubleFovea Жыл бұрын
It is sooo good! I learned a lot!
@tasodrums 4 жыл бұрын
There is way not enough people seeing this yet, you are soo good thank you for this. Simple, throughout explanations and your way to speak is so easy to follow. Great content, I've watched this whole reaper daw 101. All the best for you!
@Markplaysmusic 3 жыл бұрын
Great stuff Adam, I use reaper for all kinds of audio/video things so learning to render and export just parts is very useful, especially for stuff like tracks for my radio show, interviews and voxpops, that i can record on the fly them, timeline then up together for a show. All good. Stem & wildcard export and render is a time saver. Thanks very much.
@ShurekHam Жыл бұрын
Better then expected, thanks for the video, subscribed, going to watch a lot more now, see ya.
@errorfilenotfound Жыл бұрын
Great Videos. You made me a better musician in just a few hours ❤
@hyperactivists9390 2 жыл бұрын
once again you kick ass thanks for the extremely detailed walk through and explanations
@eastsidemusic85 2 жыл бұрын
saved me a lot of time!!
@joashorobia3822 3 жыл бұрын
Thanks Man! your a great help, God bless you!
@DC-vj9op 2 жыл бұрын
Wow, fantastic! Thanks 👍
@didierichard 3 жыл бұрын
Thank you very much 😍
@deadgoon7460 3 жыл бұрын
Thank You.
@Anton-wc7lb 3 жыл бұрын
Thank you!!!
@alejandrorivera3068 4 жыл бұрын
thanks, man
@robinjgill 3 жыл бұрын
I get it Adam. "pieces of a tree":) Thanks a lot for the video. Very useful.
@philcaffrey 3 жыл бұрын
Thanks for these tutorials Adam. I have just moved to Reaper after many frustrating years with the over fussy and now very buggy big name competitor - you know the one. I am getting on great with Reaper thanks to your tutorials but I have a question I can't answer. I record midi using a Korg Krome, so an external midi sound source rather than a VSTi. When it comes to rendering to audio, I just get a blank track with no audio wave. If I render from VSTi midi, Reaper picks up the audio no problem. I just can't find a workaround. Do you have any ideas?
@twinpumpkin 3 жыл бұрын
whats the difference between rendering with ''STEMS (SELECTED TRACKS)'' and ''SELECTED TRACKS VIA MASTER''??? If i have for example: A limiter or another plugin on my master track and I want to render the whole project for mixing (all the separate tracks)? What's the best option???
@sunnyRajkarnikar 3 жыл бұрын
really appreciate the tutorials. Question: you mentioned markers when rendering master mix, it makes sense to annotate parts of the song(lets say). i understand that region is used for completely different purpose(to mark the whole song like a whole chapter in your example), but region could still be used for the same purpose as marker right? would it make sense to use region like that?
@zendakk 3 жыл бұрын
Yes, you can use it like that. Moving regions moves everything within it on the timeline as well, so you can use it like an arrangement tool, shifting/reordering verses, choruses or whatever. Similar to what Cubase and Studio 1 does.
@brianwood169 2 ай бұрын
Hi Adam. I'm new to Reaper and I appreciate your terrific tutorials on KZfaq. I'm recording originals (very basic - piano, coals, drum-machine) to send to a producer). I have been able to follow you "Basics" tutorial (loading the UMC ASIO Driver) sufficient to lay down the raw tracks but when I open Reaper, it's now displaying: "There was an error opening the audio hardware: Error initializing ASIO driver" Also - the program is not allowing me to name tracks? Any ideas? Brian
@d6ath6ang6l 3 жыл бұрын
Could someone help me ? After having "render" my song, my MP3/WAVE file got like the first 0,5/1seconde of the song with out all the part. My song start at 0:00 with scream opening on guitar/drum and my voice come at 0:05 and not 0:00 with the guitar and drums... I can't figure it out how to "kill" that delay...
@Hoss4Blues 3 жыл бұрын
I don't see a preset Wildcard naming option for "take name" - Can this be done?
@AndreW_Raptor 2 жыл бұрын
Can I use Reason's banks in Reaper?
@unclespooky 2 жыл бұрын
Hey Adam, thanks for this. Could you clear something up for me, what's the difference btwn stems and "selected media items"?
@adamsteelproducer 2 жыл бұрын
None, just the ones you select instead of all of them
@unclespooky 2 жыл бұрын
@@adamsteelproducer of course. makes sense. thanks for quick reply. have a fantastic friday
@Joey.Darkwoods-Studio 2 жыл бұрын
There is sooo much information it's crazy... things I never even imagined about! Now, In regards to the regions section of the video, I'm not quite sure how to phrase this question, so please bear with me :) If I recorded my song and had 25 tracks, all these tracks would be in one area, so why would I have extra regions after the main track? So could I make a region out of each track or would it be simpler to just export them as stems at that point? I guess what's got me scratching my head, is why would I have extra parts after the main "area" of the song? Like in your example, "main song" and "drum bit". Once again, sorry if my question seems a little unclear.
@adamsteelproducer 2 жыл бұрын
I think you may be thinking about regions the wrong way- they’re for if you’ve got more than one song/piece in a single project, I was just giving an example of a different piece in the same file. Stick with stems if you need your tracks to be separate
@Twistedstar0320 7 ай бұрын
Why is my project not exporting all the stems in a single mix? It worked before, then I added vocal tracks, now when I render none of the vocals and now some guitar tracks just don't render.
@christopherheadcase6886 3 жыл бұрын
Adam. I dont know what I might have done but I'm trying to master several tracls to -0.1 db but my master track first seemed to brick wall at -5 and on a new unsaved project seems to brick wall at -2.5. Does this have to do with my pan law? Is there a preference or a setting that can set the overall output volume of a track other than a limiter plugin?
@adamsteelproducer 3 жыл бұрын
Sounds to me like you’ve got your master fader down below 0dB, that affects everything including master FX
@christopherheadcase6886 3 жыл бұрын
@@adamsteelproducer I wish I could attach a screen shot. The master is at default 0.0 but the meter wont rise past -5.0 db no matter how hard I hit the threshold on my L1 limiter
@adamsteelproducer 3 жыл бұрын
Probably got the output on L1 at -5. Advice before I even see it, stop using L1, stop trying to hit -0.1, you’re killing it. Go for -1.0 maximum so compressed versions have a chance of sounding accurate
@christopherheadcase6886 3 жыл бұрын
@@adamsteelproducer it is the pan law. It is cuz I am using my mastering tools on an aux track not the main master track so thr pan law prevents anything above -2.5 (if that's what my pan law is set to) but even if I throw my L1 on thr master track. And set the output ceiling to -0.1 I can push the treshhold and it will red line on the master track .
@christopherheadcase6886 3 жыл бұрын
@@adamsteelproducer ok. I mean I'm trying to get it to competitive CD VOLUMES. (I know loudness war) .. And I can do that at -1?
@x-destinygunblade3683 11 ай бұрын
how do you render just one track with the distortion effects on
@adamsteelproducer 11 ай бұрын
Watch the video again, it’s literally exactly about how to do this :)
@MartyV666 5 жыл бұрын
Has Cockos Inc aka Reaper listed you on their website yet as best tutorial ever? Cheers and thanks!
@adamsteelproducer 5 жыл бұрын
Hey if you want to send it to them, I’d be appreciative! I don’t want to send them messages out of the blue like some kind of big head, especially since they seem to work quite closely with Kenny gioia
@MartyV666 5 жыл бұрын
@@adamsteelproducer I just did.
@anonagain 4 жыл бұрын
@@adamsteelproducer Kenny does great tutorials, but they are usually short and oriented towards a specific feature or task. They're good for reference, but I'm finding your long form "in-context" tutorials very helpful. Found you on Warren Huart's channel and signed up for your Pro Mix Academy course - will be starting it this week. Thanks Adam!
@EvilTuki 4 жыл бұрын
I want to render some FLAC files into MP3 files, all at once . But for some reason I'm not able to render each channel into it's own timeline. In my case, every single channel has the timeline of the longest. For example, every 3 minute channel has other 3 minutes extra because the longest channel is 6 minutes long. Can someone help me please!!
@EvilTuki 4 жыл бұрын
Ok, so after a couple of hours hahaha I found the info I needed, The thing that no one has explained about rendering is CONSOLIDATING TRACKS.
@TheTimeProphet Жыл бұрын
When you send all your stems to a producer, how does he line them all up in the daw of his choice. I mean they only have to be out by a second and it won't sound right. I mean some stems will have more gap at the start than another one, if you know what I mean?
@adamsteelproducer Жыл бұрын
Make sure they all start at the same time, even if that means a large gap of silence on some of the tracks
@Stradlverius 3 жыл бұрын
Can you make tutorials for other things? Like doing taxes or doing an oil change?
@adamsteelproducer 3 жыл бұрын
Wish I had time hahaha
@joashorobia3822 3 жыл бұрын
P.S. you're an educator
@akifgunay6650 3 жыл бұрын
dude you need to sell thıs content to reaper producers. ıts great.
@adamsteelproducer 3 жыл бұрын
hoppole.co/reaper ;)
@akifgunay6650 3 жыл бұрын
@@adamsteelproducer ooops. ım not gonna tell there ıs free source of reaper lessons to anyone. sshhhh.:)
@BarafuAlbino 5 жыл бұрын
Its 2019. Why use MP3 for any reason? Its place is in the museum. Opus creates files 3 times smaller, and with less distortions at the same time, and is totally free.
@adamsteelproducer 5 жыл бұрын
A lot of the people we send mp3s to have little to no understanding of anything else (managers, artists, etc) so it’s much easier to just send them what they want if it’s just to listen back to a session
Adam Steel
Рет қаралды 20 М.
BalcevMMA_BOXING
Рет қаралды 4,5 МЛН