No video
Rear Disk Brake Conversion - 1972 Chevy C10
Рет қаралды 2,873
Күн бұрынIn this video, watch as Ken replaces the factory drum rear brakes with new disk brakes. Thank you for watching!
Subscribe to my KZfaq: bit.ly/2SYLX0V
/ kens72c10
• Insurance Money is App...
• Truck is Wrecked
• Wood Bed Install on 67...
• First Start After Freeze
• Holley Sniper 2 EFI - ...
• Holley Sniper 2 IAC Is...
#chevyc10
#bigblockchevy
#holleyefi
@LikeWatchingPaintDry 2 жыл бұрын
Excellent video. Clear description of installing the brake kit, and thanks for posting the link. I had a question. What wheel size and tire combination is on your truck? I have been looking all over for that specific setup with black steel wheels and raised white lettering that max out the rear space. Thx!
@DadbrosGarage 2 жыл бұрын
www.summitracing.com/parts/coo-39602 X4 www.summitracing.com/parts/bsw-50l55 x4 Hope this helps bud
@gunsandhorsepower 4 ай бұрын
I need to find some for my 72 k10 4x4 or what disc black rear axle will bolt right in
@eddydelatorre1993 9 ай бұрын
I love those wheels. Do you have any rubbing issues upfront when steering left/right? I wanna run the same set up and would love to know the model number of the wheel and offset. I have a 71 SB and the hot rod look with 15” wheels is the best on these trucks . You nailed it.
@DadbrosGarage 9 ай бұрын
nope they fit just fine
@automax061601 Жыл бұрын
Hi Ken. What brake kit is that? I don't see the link for the kit.
@DadbrosGarage Жыл бұрын
www.summitracing.com/parts/RSD-TRD4705
@H60Gamer 5 ай бұрын
Hey man, its been a year, have you taken it out to cruise yet? How do the brakes feel vs stock drums?
@DadbrosGarage 5 ай бұрын
yes sir! I've been driving around all the time. For a while I was using the wrong fittings for the brake lines to those brokes so they were not working property. Now I have it all fixed and the brakes are great.
@ToneBuilds 2 жыл бұрын
Did you change your proportioning valve, master cylinder, and brake booster?
@DadbrosGarage 2 жыл бұрын
Yes
@frankenmnster_75 Жыл бұрын
Is that 5x5 pattern
@DadbrosGarage Жыл бұрын
Yes
@frankenmnster_75 Жыл бұрын
@magnasismotors I don't see the link. Another question: Did you replace the proportion valve?
@DadbrosGarage Жыл бұрын
@@frankenmnster_75 at the time of this recording I don't think I did but I have since replaced proportional valve. I just now upgraded to hydroboost and I might get a new proportional valve
@Brian_Meg Жыл бұрын
@Ken'sGarage. What size tires?
@DadbrosGarage Жыл бұрын
295 50 15 all the way around
@sidewayzempire7237 Жыл бұрын
Do you recommend this kit?
@DadbrosGarage Жыл бұрын
Yes, I have no issues with mine. I would highly recommend you paint the calipers so they do not rust
CJ Classic Trucks
Рет қаралды 94 М.
Murtaza's Workshop - Robotics and AI
Рет қаралды 2,5 МЛН
El loquero de los tuercas
Рет қаралды 52 М.
HotRodHippie
Рет қаралды 8 М.
Tech Stuff
Рет қаралды 144 М.
Rustn’ Away
Рет қаралды 30 М.
You Break It You Fix It
Рет қаралды 2,3 М.