Tamiya Mark Fit -Super Strong- Demonstration

  Рет қаралды 38,313

rebelsatcloudnine

rebelsatcloudnine

Күн бұрын

I'm going to be testing out Tamiya's newest decal solvent. I've had mixed results with their "Strong" formula so I'm hopeful that this newest product is as "Super Strong" as they claim.
I'll also be testing it along side a few other decal solvents as a comparison.
Music:
Straight- Bensound
www.bensound.com
#tamiya #plamo #decal

Пікірлер: 130
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
I failed to mention this, and in the video it comes across as if I don't like Walthers Solvset. What I meant by "I don't recommend it" is that Solvaset is quite aggressive and some modelers might be intimidated but this product. If you are not careful it can cause a lot of damage. That being said, it has been my go-to product for many years now, as you can see in the video I don't have a lot of it left. It's a product I'd only suggest more experienced modelers try. It's a very good solvent, and I hope to be able to get some in Canada again soon.
@owencheeseman6922
@owencheeseman6922 2 жыл бұрын
I'.ve been out of the modelling game for 50 years. Since I started back up, I've been using Mr. Mark Setter and Softer. I find them to do a remarkably good job, despite my fat fingers!
@franksinatra8329
@franksinatra8329 2 жыл бұрын
Great video, is the first of it class that I see, proof a lot of decals and solvents!! Great job dude!!
@homunculous007
@homunculous007 Жыл бұрын
Great demonstration. You saved me many future frustrations. Many thanks.
@ifeyecouldpaint
@ifeyecouldpaint 2 жыл бұрын
With all Respect it also helps to lay a bit of the solvent on the model first then put the decal on top
@modelnut
@modelnut 2 жыл бұрын
Great demo on the various decals & solvents. Really liked the results with the tamiya super strong, so just need to get some. Happy modelling.
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
Thanks Mark, I think it's a bit difficult to find at the moment because of the difficulties in worldwide shipping at the moment, but it's slowly coming on the market.
@paulrichards1798
@paulrichards1798 2 жыл бұрын
A great review thanks we need more stuff like this 👍
@rogernilson3986
@rogernilson3986 2 жыл бұрын
Great stuff Jared, fun AND informative 😁
@adalecarter
@adalecarter 2 жыл бұрын
Great video. I was wondering how these compared. Thanks for the experiment!!
@Jake-jw3sk
@Jake-jw3sk 2 жыл бұрын
Awesome and interesting video! Also, I love "If you don't like, too bad!"
@ChuckAToilet
@ChuckAToilet 2 жыл бұрын
Great demo on the different solvents
@michaelhintzmikesminiature1812
@michaelhintzmikesminiature1812 2 жыл бұрын
Great video!!! Love Tamiya products!!! Thanks for sharing
@Corsario-ud1du
@Corsario-ud1du 2 жыл бұрын
Thanks or this demonstration. Keep up the good work!
@gillkitten1
@gillkitten1 2 жыл бұрын
An extremely useful experiment. It also demonstrates the need for a range of solvents as there seems to be a wide range of varnishes used by decal manufacturers for their carrier film.
@scottbuildsthemall5124
@scottbuildsthemall5124 2 жыл бұрын
Thanks for posting this video! I am a long time Microset and Microsol user, and sometimes reach for the Solvaset when a decal fails to settle down. I will have to give this new product a shot based on your results.
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
I hope that you will like it. I'm eager to test it out one some more projects.
@THROTTLEPOWER
@THROTTLEPOWER 2 жыл бұрын
Great vid, thanks for sharing! 👍👍👍
@SuperBommer1
@SuperBommer1 2 жыл бұрын
Thanks for making this great test
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
Thank you for watching :)
@bhenders52
@bhenders52 2 жыл бұрын
Thanks for doing this!
@jamesmcansh3441
@jamesmcansh3441 2 жыл бұрын
Thanks great work as usual im sold ✌🇨🇦✌
@Mythopoeikon
@Mythopoeikon Жыл бұрын
Very informative. Thank you so much!
@GYRUSS
@GYRUSS 2 жыл бұрын
Great experimentation mate
@davegiles2344
@davegiles2344 2 жыл бұрын
Great demo
@philski24
@philski24 2 жыл бұрын
Solvaset is the best out there - been using it for years and it just takes patience and willpower to leave it and not touch it to do its thing. I hated it at first but once I listened to directions it is a dream. But it looks as if for those super stubborn decals, it looks like the nuclear option! Thanks!
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
Solvaset was the first solvent I ever used and I still really love it. I have had a few instances where it was too aggressive with the decals and I've had a few people mention the same thing. But I used it almost exclusively on my latest model and it saved the decals which was a huge relief.
@shoe2241
@shoe2241 2 жыл бұрын
i have solvaset for yrs never had any problems with decals or paint.
@adampender2482
@adampender2482 2 жыл бұрын
Solvaset is great. I recommend a couple of light coats but waiting a couple of hours between each coat to see and never let it pool up. I take a soft brush to lightly soak up excess. Make up brushes work great for this.
@davidbristow6311
@davidbristow6311 2 жыл бұрын
Micro Sol and Set I find are best used together, I’m no chemist but I think they compliment each other rather than just the one shot solvents out there.
@Maddog-nb9vu
@Maddog-nb9vu 2 жыл бұрын
Just saw a video by Will Pattison where Solvaset and Mr Softer ate through Aqua gloss and damaged the AK RC paint underneath. Not a good combination. But it worked well with other clear coats and paint.
@oldb-1kenobi
@oldb-1kenobi 9 ай бұрын
I have been using the Markfit Strong and applying it to the model before placing the decal, then multiple coats, and I just keep doing that until I think it's right and have been getting great results.
@moparnut6286
@moparnut6286 2 жыл бұрын
I like the Walters sovlaset and the micro sol definetly getting the Tamiya super strong to try it out thanks for the test.
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
I think that you will be very pleased with the results of Tamiya Super Strong, I'm anxious to get a few more models completed and test it out further.
@NigelsModellingBench
@NigelsModellingBench 2 жыл бұрын
Excellent video!! I used MCLT on my Bandai Decals for the Y wing Instrument panel. I just ordered a bottle from Taiwan. thank you. I would have liked to have seen this on old Hobby Boss decals.
@Modman2007
@Modman2007 2 жыл бұрын
Great video! Thanx!
@smallmodelcollector
@smallmodelcollector 9 ай бұрын
Great video; I ordered some Super Strong now.
@rebelsatcloudnine
@rebelsatcloudnine 9 ай бұрын
It's been my go to solvent for tougher decals ever since I bought it, I really like this stuff :)
@chrishumpal3780
@chrishumpal3780 2 жыл бұрын
I use a combo of Tamiya mark fit and Solvaset. I'll put the mark fit down first, set the decal in place. Roll it out with a swab then apply solvaset on top. Works pretty well.
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
I usually do a similar method as well, but just for the purposes of this video, I wanted to show how the solvents reacted to the decals on the surface. It would have been more of a process to add a base solvent to the mix.
@knelson885
@knelson885 2 жыл бұрын
Did I just find a new ASMR modeling channel? Nice work mate.
@bugler75
@bugler75 2 жыл бұрын
I was reluctant to even try the new tamiya because the old one was so weak. But I will buy it now thanks to your first class presentation. Thanks! Ian
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
I was too Ian, until I saw a demonstration from a Japanese modeler and I was convinced to try it out.
@bugler75
@bugler75 2 жыл бұрын
@@rebelsatcloudnine I’m definitely going to try it. I have a lot of old Eastern Europe models I got at a car boot sale and they have very thick but very old decals. But I’d like to try and build them as originally as possible 👍🏼 Have a nice day everyone, Bon dimanche, Ian
@paintnamer6403
@paintnamer6403 2 жыл бұрын
This is a neat experiment. I have been happy with Solvaset
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
Can't say that I blame you, it's been good stuff to me for over 10 years now :)
@heinrichsmodels5964
@heinrichsmodels5964 2 жыл бұрын
Hi love your videos
@lobilly
@lobilly 2 жыл бұрын
Thought all the water slide decals are the same till I see this. Been using the Tamiya Strong. Off to the store for the Super Strong now.
@myesenc
@myesenc 2 жыл бұрын
I’ve used Solvaset for years, it’s my go to solution 👍
@JohnDora9-95.
@JohnDora9-95. 2 жыл бұрын
Hi From Michigan! I have enjoyed your channel a great deal as I got back into modeling after 44 years (pandemic!) And I’m loving it- I’ve built 20+ kits since- mainly Tamiya- and after building other brands- am a Tamiya fan boy as well- paints, glues, many tools, 1 of my 5 airbrushes etc- I watched your video on Tamiya Mark Fit Super Strong and ordered it from Japan (only place I could find it via Scalemates, Amazon and others-) specifically to handle Tamiya Decals- as you so astutely demonstrated- it took 3 months to get to me- but- worth the wait! It is the best I’ve seen or used- also low vinegary/chemical smell. I’m finishing up an Academy P-40N now- no label on the Academy decals other than Academy: these are the thinnest decals I’ve ever used- off the paper in 20 seconds in ROOM TEMPERATURE WATER! Difficult to work with as too thin- the Mark Fit Strong here was just perfect- the Super Strong- was overkill: I buy decal sheets from top rated companies as well when I want to do something different with my Tamiya aircraft models kits- and paint direct to fuselage with Montex Masks- BUT I LIKE working with Tamiya’s thicker decals- a bit more forgiving than all others- never had a tear in one- easy to move for me- just getting them to really settle down- your test proved this new product- my results were the same as yours- Thank You! Figured Tamiya had enough complaints on decal thickness- and remedied it this way! Cheers to you in Canada! Half of my family is there- a few Miles away from me here at the border (I was born in Canada)- it’s been nearly 2 years now since I’ve seen my family there- visited and enjoyed that most lovely of countries and people- Nice to hear your voice! Cheers- JW
@laszloharsanyi8320
@laszloharsanyi8320 2 жыл бұрын
excellent video, I always greatly appreciate the effort when somebody take the time (and money) to try and compare modelling tools IRL conditions helping us to decide. One question though: what kind of paint and what kind of clear cote did you used? those handled even the stronger solvents without any discolorization or stain.
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
Thank you very much, I'm glad that you found this video useful. The paints I used were Tamiya XF-21 Sky, covered with a single layer of X-22 Gloss.
@laszloharsanyi8320
@laszloharsanyi8320 2 жыл бұрын
@@rebelsatcloudnine Thank you very much!
@doublenickelbob
@doublenickelbob 2 жыл бұрын
I use mark fit strong and put it on the model, then place decal on, then more mark fit strong, pushed down with cotton swab and had no issues.
@was1069
@was1069 Жыл бұрын
long before decal sets. I'd used testers 1st liquid glue to set my decals... talk about strong 😂 but i found if i took a paint brush and just barely touched the decal very little at a time. it would form it around just about anything. but it would melt paint and decals in an instant if you put too much on or touched a still wet decal with it. thing that was so cool was that it melted the decal so well that it looked like it was painted on and was not a decal at all.. but it's almost an instant melt on most, and you most definitely can not brush across the decal!!! u must carefully dab it with just the tip and let it lay down very slowly and stay away from any melted decal till it dries completely. also never get the glue on the paint.. and never put so much on that the glue will run down the decal. because it's all over if u do.. very time-consuming, but if u get it right, it's amazing..
@johnnoble01
@johnnoble01 2 жыл бұрын
Although ive got the microsol products my go to is Humberol decal fix. Tamiya X20A thinners works as well.
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
I've heard a lot of great stories about Humbrol Decalfix, but sadly Humbrol pulled out of Canada 2 years ago so I can't easily get it.
@randalscott7224
@randalscott7224 2 жыл бұрын
Very interesting experiment! Though a bit disappointing with the Bandai decals, is there anything that works with those short of a blowtorch? I have used the Mr. Mark Softer and Setter system with varying results. It made the instrument decals conform very well on the instrument panels of a Fujimi RAF Phantom kit I started a few years ago, they looked almost as good as an Eduard pre-coloured photo-etch. It also worked well with Tamiya decals, but the Bandai decals defy everything. These are just my personal observations, other's mileage may vary.
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
Thanks for the comment Randal, to be honest I've rarely used Bandai's decals, I try to paint as much as I can instead of using their decals. Plus they have a grainy texture to the printing I wasn't a fan of. But I was expecting something out of them with the solvents. With the Super Strong, I failed to mention that they were the flattest of the bunch, but none of the surface details came through. I was really surprised how little they reacted.
@robbroy
@robbroy 2 жыл бұрын
By far the best I've come across (credit to Phil Flory from Florymodels) is Tamiya X-20A. It works beautifully, and has much better surface behaviour than micro-sol in that it spreads out and doesn't bead up. Next level which also works as your nuclear option is to use Tamiya extra thin - yes the glue. Again works well on stubborn decals, just be careful to apply it and DO NOT touch it for a few hours.
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
@@robbroy Yep, I did a whole video on that last year, it works.
@SteveSmith-kf9on
@SteveSmith-kf9on 2 жыл бұрын
AK decal adapter, fantastic stuff and it won’t damage paintwork. Stubborn decales just add low power hairdryer 👍🇬🇧👌, great vid Thanks
@briangrant774
@briangrant774 5 ай бұрын
love the demo. have to say i'm surprise you're down on the walthers product. i like how agressive gets on the decals really make the decal snug down on the model. my pereferance. microscale product I can take it or leave it. two stage process not my bag.
@LEXXdesign
@LEXXdesign 2 жыл бұрын
A very helpful and interesting demonstration. Have a beer from me 🍻
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
Thank you, I chose a local Root Beer, and it was delicious :)
@hubertvancalenbergh9022
@hubertvancalenbergh9022 Жыл бұрын
These decals are all quite big. I'd like to see a test on really small ones in the
@kyllerkill
@kyllerkill 2 жыл бұрын
I think the mr hobby mark softer is the most used one. It’s the only one I’ve ever seen used by modelers around me.
@Ricksarmoredmodels8539
@Ricksarmoredmodels8539 2 жыл бұрын
Really Really good test video! How about a rematch with Tamiya super strong, micro set and put it up against VMS decal set & soften. Thanks
@calvingifford9442
@calvingifford9442 2 жыл бұрын
I have had pretty good luck with Mr. Mark Softener with all but the thickest of decals.
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
It's a solvent I'd still like to test out. I'll have to keep my eyes peeled in the future.
@statoilbensin2190
@statoilbensin2190 2 жыл бұрын
I use the regular markfit and revell decal soft. No carrier film is showing after clear coat. I try to use decals by ICM, Zvezda and Italeri as they are not as thicc as Tamiya.
@LyudmilaRGVK
@LyudmilaRGVK Жыл бұрын
Did not the Tamiya instructions say to put it on the Model first where you were going to apply the Decal and then on the top after applying the Decal?.
@jimsmalleimb7709
@jimsmalleimb7709 Жыл бұрын
Walthers Solvaset is by far the best setting solution hands down. Just have to use it right.
@HKYT649
@HKYT649 Жыл бұрын
cool
@rileyk99
@rileyk99 2 жыл бұрын
I use solvaset pretty much exclusively. I've tried sol/set and it always just seems like putting extra expensive water on my decals.
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
I would agree with you there, as I mentioned this was the first time I've really had good results with Micro Sol.
@CafeenMan
@CafeenMan 2 жыл бұрын
Solvaset is the best. If you're ruining decals with it then you're messing with them when they're wet. You have to get the decal where you want it, then blot it well so it won't move and then apply the Solvaset. Once it's applied DO NOT touch it until it's completely dry.
@Maddog-nb9vu
@Maddog-nb9vu 2 жыл бұрын
What gloss coat do you use? I recently used Tamiya super strong on Tamiya decals. My gloss coat was Alclad Aqua Gloss (acrylic) over AK real colours and dried for about 24 hrs. The Tamiya super strong was applied twice over the decals (2nd application 2 hours later) then set to cure over night. The next day I notice the Tamiya Super Strong reacted with the gloss coat and decals leaving a white stain on parts of the decal and areas of the gloss surface outside of the decal. Nothing would remove the stains. However the decals did adhere well to the surface. After a test on a dummy model Tamiya super strong over unglossed AK RC or Tamiya XF left no staining at all but decals did not adhere as well and there was silvering. Next test will be Tamiya super strong over 4 different gloss types to see what happens. Update: Tried some different clear coats with only Tamiya Mark Fit Super Strong, Model Master Semi gloss (acrylic): No issues over AK RC or Tamiya XF. Alclad light sheen (enamel): No issues over AK RC or Tamiya XF. Alclad clear gloss (enamel): No issues over AK RC or Tamiya XF. Alclad Aqua gloss (acrylic): Very slight paint discoloration Tamiya XF. With AK RC got heavy watermarks on decal and painted surface that could not be removed. So it appears Mark fit super strong reacts with Aqua gloss over AK RC paint. D'ont know if other paints with Aqua gloss have this issue.
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
I used Tamiya X-22 Clear over some XF-21 that I was color sampling for a future project. I think that it dried about 24 hours and it was just one coat of clear. I've had solvents react to clears a few times and usually pretty mildly, I've found that adding a second layer of clear will most times get rid of any discoloration.
@Maddog-nb9vu
@Maddog-nb9vu 2 жыл бұрын
That's what I thought. 2nd coat didn't remove or hide any of the white stains on the Aqua gloss. Will have to get some X-22. After posting on your video I did some research and found a youtube video by Will Pattison who was testing various decal solutions (not Tamiya super strong) and had the same problem I did with the Aqua gloss over AK RC paint with some but no issues with the Tamiya strong. Go figure.
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
@@Maddog-nb9vu For gloss coats I've only ever used 3: Future/Klear, which works great but it takes time to layer up and dry. Tamiya X-22 Clear which is a great clear when you need it in a hurry. And recently I tried LP-9 Clear, which I didn't like at first but I tried it again recently and it's WOW! On a flat surface, it's really glossy and because it's Lacquer it dries harder. I've had a few issues with decal solvents discoloring Future/Klear, but only when I used Walthers Solvaset and back then I used a ton of it.
@Maddog-nb9vu
@Maddog-nb9vu 2 жыл бұрын
Thanks for the info. Keep up the good work.
@stevethefishdotnet
@stevethefishdotnet 2 жыл бұрын
I can't remember if I sent you the June Model Art issue regarding decals, but it has an article in which decal solutions are rated against each other. It doesn't feature Walther's, but it has Vallejo's Decal Medium and Decal Fix (both rank poorly). Tamiya's standard Mark Fit ranks poorly as well. Actually, they rank Mr. Mark Softer better than Tamiya's Mark Fit Strong. Mark Fit Super Strong gets a full five stars, as does Goodsmile's solvent (which I doubt can be easily obtained outside of Japan).
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
I think you showed that to me on a chat. It sounds very familiar, especially the part with Vallejo. Sadly I can't get Walthers Solvaset in Canada anymore. I'll have to order some and hope it gets across the border.
@ja37d-34
@ja37d-34 2 жыл бұрын
Ordered a bottle, have some decals that needs something stronger to settle properly. :)
@KapiteinKrentebol
@KapiteinKrentebol 2 жыл бұрын
What exactly does that stuff? I always just use water and let the decals sit to dry.
@davidgreen5099
@davidgreen5099 2 жыл бұрын
It softens the decals so they snuggle in and around surface details on the model. The decals will have a "painted on" look.
@KapiteinKrentebol
@KapiteinKrentebol 2 жыл бұрын
@@davidgreen5099 I see, thank you for the reply.
@davidpalmer4184
@davidpalmer4184 Жыл бұрын
Always been a big fan of Microsol and have always (So long as the aftermarket gods have been kind!) avoided Tamiya decals and the grief involved. QUESTION. I have been lucky enough to get a Bandai 1/72 perfect grade Millennium Falcon. Is there any aftermarket decals that are better than Bandai for that model. I seriously do not want to stuff it up! "Help me one can only, you are my only hope!"
@rebelsatcloudnine
@rebelsatcloudnine Жыл бұрын
If you check around ebay and etsy, there are a few modelers that have made new decals for the Bandai kit. I can' speak for their quality as I've never tested them myself, but they are out there.
@davidpalmer4184
@davidpalmer4184 Жыл бұрын
@@rebelsatcloudnine Thank you.
@alexanderyoung3616
@alexanderyoung3616 Жыл бұрын
A very informative video. Just for the record, you are saying Deckals? Decals? I'm sorry, just, I mean, okay...
@rebelsatcloudnine
@rebelsatcloudnine Жыл бұрын
Yep, decals is another way of pronouncing the word.
@nismojukerich2994
@nismojukerich2994 Жыл бұрын
I've never heard it said like that before either. Took about 10 times before I realized what he was talking about 😂
@massmike11
@massmike11 2 жыл бұрын
Whats the difference between microsol and microset?
@Bonedadyo
@Bonedadyo 2 жыл бұрын
Microset is used more as an adhesive when initially putting down the decal. Microsol softens the decal to help form over the surface and make it look more like it was painted on.
@putuplasts7940
@putuplasts7940 2 жыл бұрын
There is a Super Strong? Didn't know... Whats next, Super-Duper Strong? :D
@cads999
@cads999 2 жыл бұрын
Be great if we in UK could get Solvaset or Super Super Strong!!!!’ Anyone know if we can - I cannot find them on sale 😞
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
I have a friend in the UK who says the same thing, I wonder why they are harder to find?
@cads999
@cads999 2 жыл бұрын
Because of restrictions in chemical content possibly
@williamroberts8470
@williamroberts8470 2 жыл бұрын
Strong enough to work on Japanese decals? Strong enough to kill old Czech decals?
@BAGHEAD1995
@BAGHEAD1995 2 жыл бұрын
The best way to use Tamiya decals is to bin them 🤣
@laroark5036
@laroark5036 Жыл бұрын
Maybe it's just me but I've always heard it said DEEE-CAL and when I hear decal I freak out . Sorry
@nismojukerich2994
@nismojukerich2994 Жыл бұрын
Took me about 10 times of him saying it before I realized what the heck he was talking about. I can't say I've ever heard it said like that either 😂
@behrens97
@behrens97 2 жыл бұрын
At 10:34 you completely skipped the Tamiya decal with the Walthers. Thats why the results were disappointing. Good demo though
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
Yes, and at 10:41 I mention this in the caption. I also mention that I corrected this.
@behrens97
@behrens97 2 жыл бұрын
@@rebelsatcloudnine oops I missed that part
@dalethelander3781
@dalethelander3781 2 жыл бұрын
Solvaset isn't anywhere near as strong as it was in the 70s when decals were thicker. Walthers has re-formulated Solvaset as decals have become thinner. To my mind, it's no stronger than Micro Sol. In point of fact, I've had Micro Sol destroy decals and not Solvaset. As with all things, YMMV.
@heinrichsmodels5964
@heinrichsmodels5964 2 жыл бұрын
First
@rickmoreno6858
@rickmoreno6858 2 жыл бұрын
You are aware that you need to apply more than one solution more than once right you have to do a multiple sometimes 567 even 10 times you have to put it on there right
@stevethefishdotnet
@stevethefishdotnet 2 жыл бұрын
It helps if you actually watch the whole video. He applies an additional coat later in the video.
@rickmoreno6858
@rickmoreno6858 2 жыл бұрын
@@stevethefishdotnet I watched the entire thing.
@stevethefishdotnet
@stevethefishdotnet 2 жыл бұрын
@@rickmoreno6858 Then you somehow failed to notice that he did apply more than one solution. This video is just an empircal demonstration to compare the effectiveness of these solutions and it's not about a final result. OCD spergs. SMH
@ramanjeet1111
@ramanjeet1111 2 жыл бұрын
is Tamiya Mark Fit - a glue cement
@vidar7106
@vidar7106 2 жыл бұрын
You didn’t put #3 on the Tamiya first round. You skipped it.
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
10:44
@Walkercolt1
@Walkercolt1 2 жыл бұрын
What the hell is a deckel??? A DEE-CAL (from the Italian Decalmania) is a water-slide marking usually silk-screened onto a paper or PLASTIC carrier film. (Yes there are plastic-based DEE-CALS sold). What has happened to English pronunciation???? NIK-ON instead of NY-KON (its been for 85+ years the INVENTOR personally told me) TO-KEY-OH instead of TOK-YO and perversions of ENGLISH words!!!
@rebelsatcloudnine
@rebelsatcloudnine 2 жыл бұрын
I know you are trying to sound smart, flying into a fit like this is seriously juvenile. A lot of commonwealth countries pronounce it like decal and others will say dee-cal. Many English words are different depending on the region of the world. I'm just so confused as to why you and so many others can't understand this and take such personal offence to it. And that doesn't make you right, it just proves your level of immaturity and lack of understanding that there is a whole world out that that doesn't revolve around you. I also mispronounced Revell and Tamiya, but you didn't notice that eh?
@MisterHampshire
@MisterHampshire 2 жыл бұрын
I’m sorry I wanted to watch this but had to stop. Please take as constructive criticism that the (unnecessary) background ‘music’ just fights the narrative all the way through, defeating the object of the purpose 😢
@stevethefishdotnet
@stevethefishdotnet 2 жыл бұрын
Holy crap. This is an informative video and here you are complaining about the soft background music playing in the background. Commenters like you are all the same. Everything is about _you_ and your sniveling little nitpicks, but you take the cake by you 'sperging out and stopping the video just to rage on your keyboard.
@MisterHampshire
@MisterHampshire 2 жыл бұрын
@@stevethefishdotnet Oh dear. I merely pointed out that I found it hard to listen to the narrative due to the music that was fighting the narrative of a video I actually wanted to watch. I even pointed out I hoped it would be taken as constructive criticism, not *a* criticism. The fact remains that I had to stop it because I could not follow the narrative I wanted to due to the music.
@stevethefishdotnet
@stevethefishdotnet 2 жыл бұрын
@@MisterHampshire And I was able to hear the video just fine while I was frying eggs for breakfast. Time to get your ears checked.
@ianthomson9363
@ianthomson9363 2 жыл бұрын
I didn't have a problem hearing the commentary over the music, but found it painful to listen to the same few seconds of it repeated for half an hour. Please, if you must use background music, try to vary it a bit! Otherwise, it was an interesting video but from the comments saying that the Super Strong isn't available in the UK, I'm disappointed that I won't be able to try it as I'd hoped.
@stevethefishdotnet
@stevethefishdotnet 2 жыл бұрын
@@ianthomson9363 I've seen videos with very distracting, irritating music that was not background music, but mostly foreground music. People who assume that everyone else enjoys rap or Cookie Monster metal music just as much as they do. I really cannot believe you guys complain about the background music in videos like this. I've seen it before. You're barking like Cocker Spaniels and neither of you spergs have the guts to create content of your own. R@C9 has a monetized channel, and I get the feeling that neither of you nincompoops have a clue as to how difficult it is to secure music that won't ruin one's chances of having one's videos demonetized due to some random creep in the world who might arbitrarily claim ownership of said music. Neither of you have a clue as to how broken this platform is.
@adamk4662
@adamk4662 2 жыл бұрын
completely invalid test, you put twice as much on all the the Tamiya decals and then just missed one, please try to be more professional.
@stevethefishdotnet
@stevethefishdotnet 2 жыл бұрын
Adam, I'm so glad you have such helpful comments about professionalism. I figured you must have about butthundred videos of your own which demonstrate how you have attained a Zen level of professionalism, but I see that you have none. How could that be possible?
@jacklambert3265
@jacklambert3265 2 жыл бұрын
Completely invalid comment, you spent twice as much time thinking about how to write nonsense and then just missed out the information, please try to be more professional.
@williamroberts8470
@williamroberts8470 2 жыл бұрын
Strong enough to work on Japanese decals? Strong enough to kill old Czech decals?
Hate applying decals? Watch this!
23:38
Scale Model Experiment
Рет қаралды 21 М.
🎨 #Plastikdream Maquette: : Comment poser des décals ?
37:25
PlastikDream
Рет қаралды 99 М.
The joker's house has been invaded by a pseudo-human#joker #shorts
00:39
Untitled Joker
Рет қаралды 13 МЛН
ROCK PAPER SCISSOR! (55 MLN SUBS!) feat @PANDAGIRLOFFICIAL #shorts
00:31
THEY WANTED TO TAKE ALL HIS GOODIES 🍫🥤🍟😂
00:17
OKUNJATA
Рет қаралды 8 МЛН
ep225 - testing some decal setters
1:04:44
will pattison
Рет қаралды 56 М.
ENAMEL HAND PAINT GUNPLA DETAILS using Testors and Tamiya
17:35
frostedsnow
Рет қаралды 150 М.
Scale Model Basics: How to apply decals the right way to a scale model
8:36
Tamiya Extra Thin Cement And Tamiya Airbrush cleaner - The Truth
9:34
Vallejo Water Textures
9:08
vallejocolors
Рет қаралды 266 М.
How to paint tools for plastic armor models using Tamiya Products
11:36
Andy's Hobby Headquarters
Рет қаралды 201 М.
Airbrush Miniature Painting Tips I WISH SOMEONE TOLD ME
8:26
Lyla Mev - The Mini Witch
Рет қаралды 564 М.
🎦[TUTO] 🇬🇧How to deal with the new Eduard's decals
7:52
Chroniques du Blindage
Рет қаралды 22 М.
NERF WAR HEAVY: Drone Battle!
0:30
MacDannyGun
Рет қаралды 26 МЛН
Normal vs Psychopath vs Rich How to heal a cut on your finger ☝️❤️‍🩹
0:19
Pass or fail?🤔 @Colapsbbx #pedro #beatbox #beatboxchallenge
0:45
BEATPELLA HOUSE
Рет қаралды 77 МЛН
Живые куклы и злая племянница! Часть 3! #shorts
0:35