Rebuilding A Robinson R22 Helicopter Part 2
Рет қаралды 950,471
Күн бұрынThis is definitely something were not used to! However this is a huge learning curve for us and we like to take on new challenges. We have been dreaming about flying for quite some time and now we are living those dreams. We are so close to getting our pilots licenses but first we must get this beast overhauled. Were super happy to share the process with you and cant wait to see where this takes us. Thanks For Watching!!!
-GOONZQUAD NEW MERCH!!!: goonzquad.com
-Instagram: / goonzquad
-Email: goonzquadteam@gmail.com
-P.O. Box 37
Rossville,GA 30741
-Music credits:
Song: Sappheiros - Truth
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link: • Sappheiros - Truth (Vl...
Song: MusicbyAden - Rain
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution-ShareAlike 3.0 Unported
Video Link: • MusicbyAden - Rain (Vl...
Song: LiQWYD - It Will Be Ok
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link: • LiQWYD - It Will Be Ok...
Song: LiQWYD - Escape
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link: • LiQWYD - Escape (Vlog ...
Song: Marin Hoxha & Clasio - Spirit
Music provided by Vlog No Copyright Music.
Video Link: • Video
Song: MBB - Bora Bora
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution-ShareAlike 3.0 Unported
Video Link: • MBB - Bora Bora (Vlog ...
Song: YANQRA - Elation
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution-ShareAlike 3.0 Unported
Video Link: • YANQRA - Elation (Vlog...
Song: Thomas Gresen - Let Me Fall
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Video Link: • Thomas Gresen - Let Me...
@swaffordsoutdooradventure3517 4 жыл бұрын
Hey y’all I’m an Apache helicopter mechanic in the Army. The brake that you guys were talking about was your rotor brake, you use it to slow/stop the rotors from turning prior to shutdown. And the transmission oil depending on what type it uses will look dark when it’s inside of the sight glass especially if you are in a darker area, but new will look reddish. If y’all have any questions I would be more than happy to answer them!
@eag8999 4 жыл бұрын
My coast guard flight mech buddy says you couldn’t catch him dead in one of these style helo’s.
@stevenbrewer4073 3 жыл бұрын
@@eag8999 we use the r22 and r44 in all types of operations in northern Idaho from air taxis to firefighters! A well built and as far as helicopter operations go a simple and efficient design! I am also a aircraft mechanic trained in the military. Or building a airframe for military or coastguard personnel and us in the civilian world are like apples and oranges!
@TheLostfoundation 3 жыл бұрын
Black hawks are better
@Sousaboi865 3 жыл бұрын
Thank you for your service.
@StandForFreedom1776 4 жыл бұрын
Hey guy, I help rebuild my friend plane a few years are and there are thing you need to watch out for. All body work has to be inspected by a licensed FAA inspector every step of the way. If you remove a rivet it must be replace with an approved FAA rivet. Once we removed screws on my friends plane we were told we could not reuse the screws and had to purchase new FAA approved screws. ETC.
@That-bearded-dude 4 жыл бұрын
👆 this needs to be shouted out louder! Torque requirements are important as well. Can’t hardly reuse anything and it needs to be inspected.
@mikeL5183 4 жыл бұрын
Did they not say right at the beginning of the video that they're working with a certified A&P on this project? If that A&P signs off on the work you can be certain it's done right...
@keithholmes3290 4 жыл бұрын
FAAAAAAAAAAAA
@bobsears4762 4 жыл бұрын
Goonzquad in 5 years "these space ships are actually pretty simple machines when you get down into it"
@garnotgaming 3 жыл бұрын
If they didnt crash whit the heli yet..
@ThatNigga10000 3 жыл бұрын
😂😂😂😂
@thomasallen3818 4 жыл бұрын
Y’all need to get Thomas a collar that says “supervisor”. He sure looks like a boss. lol
@ecc5205 4 жыл бұрын
Lol hes always checking on their progress its hilarious
@paulstevens9165 4 жыл бұрын
Get him a red collar that says “remove before flight”
@estherberman3006 4 жыл бұрын
Yup!
@mickeytgoff 4 жыл бұрын
Lmfao
@mazeratixbox 4 жыл бұрын
thomas the technician has gotten his A&P certifications.
@LifeofPalos 4 жыл бұрын
It's so freaking awesome that we have people in the automotive community on KZfaq pushing the boundaries of rebuilds. Well done guys!
@wilbur6089 4 жыл бұрын
Nice
@narayanmatharu7239 4 жыл бұрын
that's so true!!!!!
@christocroukamp263 4 жыл бұрын
You must mention this in your video tomorrow
@lightningmcqueenfanpage4103 4 жыл бұрын
Yes
@lazreganis303 4 жыл бұрын
Its also so freaking awesome seeing every one having each other's back on this community 🙋🏻♂️
@jeffmorgan8140 4 жыл бұрын
Can’t wait for them to do a parts run to the dodge dealership in the copter
@Usmanthemecano 4 жыл бұрын
And fit the parts where exactly?
@christopherstarnes9933 4 жыл бұрын
Usman The Mechanic Just lift them with a rope underneath
@arthurclarke1071 4 жыл бұрын
thanks mountain view dodge jeep ram 😂😂
@Usmanthemecano 4 жыл бұрын
@@christopherstarnes9933 interesting.
@9lives.707 4 жыл бұрын
Usman The Mechanic it’s a joke.
@TheUnknownGoat1 4 жыл бұрын
*Nobody:* *Goonzquad next week:* What is up guys, we're here at the US Naval Base to pick up our Navy battleship
@westcoastturbos 4 жыл бұрын
Ditch the R22 for that. Yes
@xeronicus 4 жыл бұрын
Agreed, Airframe torque specs are never "Close enough" it is either "Dead on" or "Dead". Morbid, but true. I used to use Normbar and proto industrial torque wrenches for some of the stuff I used to have to do at the airport. I gather they will also need a BUNCH of safety wire.
@KingLmfa0 4 жыл бұрын
😂😂😂
@ShelbyRestorations 3 жыл бұрын
if they could, they *would* but money and space is an issue
@gregsgarage6387 4 жыл бұрын
Fearless, love it. Please invest in a couple “certified” torque wrenches as every nut/bolt needs to be torqued to spec. Not hf.
@benwhite3852 4 жыл бұрын
AlltiteBolting would be happy to take care of that for the boys
@darrendavidson9645 4 жыл бұрын
Definitely not taf
@ialex2005i 4 жыл бұрын
Huge rule in aircraft maintenance - Never reuse a cotter pin. I saw you guys saved the ones on the doors. Throw those out and buy new!
@guy_in_ashopping_cart-sfs967 4 жыл бұрын
why? they looked fine
@eizzle78 4 жыл бұрын
xXfun god 90Xx better safe than sorry, there’s no emergency shoulder in the sky.
@ialex2005i 4 жыл бұрын
@Sebastian Perez Davila When you use a cotter pin, you bend the metal. When you remove the cotter pin, you bend the metal back straight. Bending it back and forth like that weakens it and makes is susceptible to breaking.
@ialex2005i 4 жыл бұрын
@@guy_in_ashopping_cart-sfs967 When you use a cotter pin, you bend the metal. When you remove the cotter pin, you bend the metal back straight. Bending it back and forth like that weakens it and makes is susceptible to breaking.
@highwaystar8310 4 жыл бұрын
And never reuse nuts and bolts or life limited parts...
@Alexanderbuilds2001 4 жыл бұрын
Who else can’t wait to see goonzquad garage 2.0? 👇
@tomahoks 4 жыл бұрын
Game app Reviewer Oooh yeah.
@Dmanpeterson 4 жыл бұрын
They better be putting a helicopter pad on the roof.
@samrichards8251 4 жыл бұрын
Haven’t heard any updates about that in a while?
@drsawmiller2 4 жыл бұрын
Sold the land bought the R22 going to land it on the apocalypse zombie truck
@graysondoesgaming1330 4 жыл бұрын
@@Dmanpeterson YESSS!!!
@brocklagunas3055 4 жыл бұрын
Welcome to the aviation world guys! We are a tight knit community and we’re all here to help one another out. So far y’all guys are doing great. Staying organized is key! One thing I wanted to recommend was to zip tie the bags to your panels. Tape works ok but when it comes time to put everything back together the adhesive stays with the panel and is a chore to remove at the end. We do big inspections on private jets, and even being in a climate controlled hangar we find that tape is best used on tasks that last no longer then a day or two. Keep up he good work!!
@jeffselchow5719 4 жыл бұрын
Hi Guys, I have a suggested KZfaq Channel for you, Mike Patey, this guy is a MUST SEE. He has built 14 airplanes and WOW, just WOW. He is an Inspiration to all in the Aviation Community. I have my A&P too, however I have only worked on Beechcraft 1900D's. I wish you both the Best of Luck with this project, I have been a subscriber for quite some tome now and really enjoyed the Military Truck build. If it is at all possible for you guys, may I suggest a Membership to EAA, Experimental Aircraft Association. EAA in Oshkosh, WI, for the week of the show, this year was cancelled due to CV-19, is the Busiest Airport In The World!!! It is an experience to be had. Once Again, Best of Luck, can't wait for this series to 'Take Off'.
@ArturGrigio 4 жыл бұрын
Next episode: They take it to VTune, and he converts it to a plane...
@lexteakmialoki5544 4 жыл бұрын
Next episode: They take it to VTune and he shoots them in the face....
@harrisonmccullough1183 4 жыл бұрын
Puts them on the frame machine and straightens them out. Helo madness.
@og5782 4 жыл бұрын
Jay Koury what dude?
@lowtweak8663 4 жыл бұрын
Thats legit!!
@blardymunggas6884 4 жыл бұрын
Goonzquad just killed all the other car rebuild channel. Helicopter is really a next level rebuild
@southernsymmetry9728 4 жыл бұрын
When are we gonna see some episodes on the new shop build? Ya'll still waiting for permits and crap?
@jonathankilgore864 4 жыл бұрын
Hopefully they decided not to build it in the worst area around Chattanooga lol.
@Chris101209 4 жыл бұрын
Right? Quit buying helicopters and build a nice sized shop or expand what ya got
@9lives.707 4 жыл бұрын
Chris101209 clearly they know what there doing. idk why you’re so phased about there life. let them do what they want you have no idea what’s going on behind the scenes. it’s takes awhile for permits buddy.
@Hitycooking 4 жыл бұрын
kzfaq.info/get/bejne/e8hoqtx4x5-0eJs.html
@zgrossmanzg 4 жыл бұрын
They do not run on jet fuel. I repeat do not put JET-A fuel in it. It runs on 100 low lead. Most airports have both. 100LL is more expensive. Running around 4.50 to 5 a gallon
@arghjayem 4 жыл бұрын
Zach Grossman was thinking exactly that, jet fuel in what is essentially an air cooled flat four petrol engine would be nuts!
@reneprovencher8395 3 жыл бұрын
I was a jet mechanic in the AF. Everything on this copter needs to be torqued. And all the nuts bolts etc wired. I was proficient in wiring hundreds of nuts and lines. Make sure it’s done right. Because I know you guys do everything right! Just wanted to do an FYI. Good luck, that baby will fly right guys!
@Woodymbr 4 жыл бұрын
You guys will go through all of this when you’re taking your flying lessons but it’s very important to keep in mind the maximum takeoff weight (MTOW) of the helicopter when planning your trips. Even though there’s space under the seats for bags it doesn’t mean you can always use them. The weight of you guys plus a full standard fuel tank will easily put you close to the MTOW. Most of the time you can either go far with one person and full fuel or you can go together with bags but you’ll be stopping a lot for fuel. Not that it matters as the more fuel stops means you get to see more places! Enjoy the build and enjoy learning to fly guys. Having a pilots licence and flying is one of the best things in the world.
@avoidingtrees560 4 жыл бұрын
David Woodward Great encouraging and positive kind comments for future private pilots.👍 Cheers from France daring America. ( that’s why you have many guys like Elon musk)
@EdwardTilley 4 жыл бұрын
@@avoidingtrees560 I wish there were more. This is the America of the 1940s and 50s right here. Most can't do this today and it costs the nation its economy and humanity.
@EdwardTilley 4 жыл бұрын
These guys are light; I weigh 220 and when my 200 lb instructor got into a C152 that wouldn't hold altitude on a hot day (fyi heated air is less buoyant than cold). Its a very worrisome feeling when the aircraft (that needed an engine overhaul at the time), couldn't carry us - so yes be very careful with MTOW. A 44 would have been more forgiving but has MTOW considerations just the same.
@rsprockets7846 4 жыл бұрын
You bust a fuel pump on a mambo you coast to shoulder, fuel pump fails on. Chopper you go SPLAAAAAT
@ryancox2799 4 жыл бұрын
@@rsprockets7846 It's a carbureted engine, there is no fuel pump. But fuel exhaustion and carb ice is something to be worried about. People have a misunderstanding with helicopters, if the engine does fail, it doesn't mean you go "splat"! Helicopters are required to have a freewheeling unit so that the main rotor system and spin freely from the engine.
@jamilahmed7204 4 жыл бұрын
No one: Goonzquad: Rebuilding International Space Station
@GrovesvilleOfficial 4 жыл бұрын
Jamil Ahmed lol
@willb3018 4 жыл бұрын
Picked it up at auction after it crashed to earth. These guys are really fun to watch.
@jamilahmed7204 4 жыл бұрын
@@willb3018 Just parts that fell from space 😂😂
@DaRealZa 4 жыл бұрын
😂😂😂 Swear
@mrshelton3301 4 жыл бұрын
Looking for that launch button
@theoutdoorfox6560 4 жыл бұрын
16:30 That brake you are talking about is a rotor brake, what happens is when you are shutting down, you pull the lever and it slow both the main rotor and tail rotor. It’s used so you don’t have to wait 5 minutes for the rotors to stop spinning. It can also be used when you turn on the engine, you pull it so your rotors won’t spin. I work on pave hawks, and this is really cool to see this type of maintenance in the civilian world. And you guys are nailing the component identification. Best of luck
@shawnhoem487 4 жыл бұрын
Good luck guys! As a helicopter mechanic of 22 years. Better get a current set of manuals. I always enjoy bringing a bird back from the near dead. Lots of fun. Get your A&P IA to sign off your log books as time spent towards you getting your own A&P's.
@josephperkins4163 4 жыл бұрын
“Don’t Worry Be Happy”. When the Helo starts going back together and you have the A&P person with you it will all work out! Outstanding work, your videos are great!
@motgoai1008 4 жыл бұрын
yeskzfaq.info/get/bejne/brFgodGW0N2bY6M.html
@abiorismartinez7080 4 жыл бұрын
Is it only me that never imagine that Goonzquad will be rebuilding a HELICOPTER 🚁 2020 keeps getting more crazy 😅
@johnnaylor1706 4 жыл бұрын
See what a pandemic will do to you
@TiktokBrandoniMacaroni 4 жыл бұрын
Everybody rush to there place in the end of the world they got all the survivors gear ⚙️ heli , big rig 🚛
@paschalnnadi7470 4 жыл бұрын
Great boys... I love their imagination and its shows that they can build anything that has wheels
@lazygamer923 4 жыл бұрын
@@paschalnnadi7470 Helicopters don't have wheels.
@PanicandHide 4 жыл бұрын
Super crazy I didn’t expect this it was a pleasant surprise I just hope they are careful 😁
@1972dsrai 3 жыл бұрын
I love that nothing fazes you guys. This is arguably your most challenging rebuild to date simply because of being so far outside what you normally do. I look foward to seeing you flying it one day. Great idea to have Tommy guiding you along the way. From London, uk
@kickit59 4 жыл бұрын
The best thing about Goonzquad is they are not afraid to work and try new things! This helicopter is cool and will be a great build series! Don't forget to sneak in a few Supra episodes as well!
@drnobody1006 4 жыл бұрын
3 Months Later: “Rebuilding a Tank”
@bitdfu6047 4 жыл бұрын
Would be cool 😂
@Jimithy98 4 жыл бұрын
They already did that kinda, would be cool to see an actual tank
@blakeaustin6391 4 жыл бұрын
don’t say that. i hate these kinda rebuilds
@drnobody1006 4 жыл бұрын
bitdfu if they did it would be like their living real life gta
@bitdfu6047 4 жыл бұрын
@@drnobody1006 xd yeah it's kinda is already
@Alexanderbuilds2001 4 жыл бұрын
I swear this channel just keeps getting better and better. I’m here for the long haul Also I can’t wait for the goonzquad garage
@mercurymadness9005 4 жыл бұрын
Good for you awesome I’m a follower to and it doesn’t matter what these kids are doing. People follow the channel for a reason.
@oufreudfreud8341 4 жыл бұрын
Hey I'm an A&P mechanic and sheetmetal mechanic at Tinker Airforce base and have been one for about 15 yrs now. I know a lot of this kinda stuff man. Awesome!
@Superwoody24 4 жыл бұрын
Apparently a lot of folks missed where they said they had to have someone to oversee certain aspects of this tear down/rebuild. And they were only tearing into what they can. Not to mention I'm guessing they have video documentation of everything being disassembled. Either way I hope they get the very best training on flying this and other helicopters.
@sifer5913 4 жыл бұрын
Thomas looking at the goons like they lost their damn minds
@spidey5928 4 жыл бұрын
As an AMT who’s been here from the start I never thought the day would come where you actually go into aviation....big shoutout to you
@GuessWho-uc5uq 4 жыл бұрын
Hey finally an AMT that supports these guys and isn't crying over every move they make.
@deephorizon1365 4 жыл бұрын
As a student pilot I never thought I'd see the day I would hear "Hey guys today we're rebuilding our Robinson R22 Helicopter" 😂😂
@spidey5928 4 жыл бұрын
Guess Who theses guys literally do their research on everything new they work on and I commend them for that...and they’re not afraid to ask for advice on something they don’t know about....the people that criticize them are just jealous of their work
@gosseroland 4 жыл бұрын
Weird thing to notice but...The shelves you bought can be put together different to make MORE shelves. instead of making 2 shelves. you can link em together for 1 big 3 end unit (slightly more stable) shelf. or buy a few more cross pieces for a REAL long shelf. sorry if this is a repeat comment but it was bugging me and I love learning more efficient ways to do stuffs. If you worry about tagging em with all your toys, you can drop some anchors into the cement and lag bolt em down but that's probably overkill in your application. I love your channel guys keep up the creative fun ideas. I'm a dreamer and thanks to guys like you and other KZfaqrs like Alex Steele I'm becoming more of a do'er. Giter DUN!
@williampeachey3607 4 жыл бұрын
Coming soon, get your A&P certification by attending the Goonzquad Virtual University online correspondence course. YOU TOO can learn to be an Aircraft mechanic in the comfort of your own home. That's right, earn your dream career by watching a few short KZfaq easy lessons while eating chips in your recliner! Seriously Goonz, I think it"s another one of the most interesting builds yet, seems like a few viewers don't hear your statements that the major components have to be shipped out to be rebuilt professionally and that the entire project will be over seen by a certified mechanic. There is even a complete organization to help the homebuilt aircraft community and a Experiment Aircraft Association which also supports homebuilders. Anyways thanks again for letting us look over your shoulder while you rise above the land locked doubters and take to the sky.
@felixtheone6772 4 жыл бұрын
“Dad can we have a helicopter”. “Pfttt yeah when I get a new truck.” 15 Years later
@santoscardona1 4 жыл бұрын
Thomas the inspector is thinking “This is no car!”
@roccov3614 4 жыл бұрын
Me: How cute. Thomas is checking out the new build. Thomas: This is a weird looking car. Where are the wheels?
@lazygamer923 4 жыл бұрын
@@roccov3614 The future
@bustertim5333 4 жыл бұрын
Thomas is looking at them and thinking ur crazy boys
@Hitycooking 4 жыл бұрын
kzfaq.info/get/bejne/e8hoqtx4x5-0eJs.html
@dannyoliveira4787 4 жыл бұрын
From rebuilding a home , vehicles, vessels, to helicopters. You guys definitely have talent keep it up boys love your channel.
@thunda6440 4 жыл бұрын
Don’t know if y’all read comments but this video is more relatable for myself! Been in the military 4 years working on the A-10 C model. Rebuilding aircraft is a different type of feeling of pride when it’s all said and done!
@steveg2277 4 жыл бұрын
Get new cotter pins for everything guys. That’s a huge no no re-using them.
@AMLagonda 4 жыл бұрын
calm down mate, its just a disassemble.
@drkgamer2167 4 жыл бұрын
Wym I always reuse my cotter pins for my cars... 😂
@PaperMoonShine1 4 жыл бұрын
Theyre going to die.
@AMLagonda 4 жыл бұрын
@@PaperMoonShine1 na they are safe, the copter wont get air again.....
@heathermaya3633 4 жыл бұрын
Cotter pins? Are those the tiny ones?
@leniterfortis4832 4 жыл бұрын
Goonzquad 2040: "What is up guys, today we are rebuilding the Curiosity Rover here on Mars."
@GrandMoffJoseph 4 жыл бұрын
Next week, we Procharge the rover! :D
@Still-ill-Trill 4 жыл бұрын
@@GrandMoffJoseph We just got back from the dealership with some carbon fiber goodies for the Rover, and we may even have an exhaust coming too! Stay tuned
@leniterfortis4832 4 жыл бұрын
@@GrandMoffJoseph "Should we just show them the new rims we got for it? Or maybe wait for the next video?"
@hardline5889 4 жыл бұрын
😂 I think they are also going to do a ground up restoration of the Space Shuttle Discovery with some new “Daaaannnggg Sooonn” rims!
@glenn7350 4 жыл бұрын
Goonzquad 2028: “Look at this beautiful Lockheed Martin F35”
@mattcat1148 4 жыл бұрын
@Hai Boai ?
@fatfreddyscoat7564 4 жыл бұрын
Glenn “Holy shit this thing’s badly built”
@glenn7350 4 жыл бұрын
Fat Freddy’s Coat 😂»Let’s tune this and make some wild improvements”
@A1DANCD 4 жыл бұрын
I'm an aircraft mechanic and loving this video. You'll find many older aircraft to be simple stupid in terms of design and operation to reduce the chance of failure or other issues. Looking forward to many more videos and remember no matter how tempting it is, home depot is not the aircraft parts store!
@scottcol23 4 жыл бұрын
Three reasons you rivet aircraft.. 1) Material Thickness. its very difficult to weld thin aluminum. 2) repeatability, To help with the repeatability of rivets there are certain specifications that most rivets used in industry must meet. These standards help ensure that they all form in a similar way with predictable results and predictable strengths. its harder to replicate consistent thin material welds. 3) Inspection. During inspection of rivets the inspector will spot check rivets using a gauge that measures if the “butt” of the rivet has the proper diameter and height The values are pre-determined for the different sizes of rivets..Because welding is a chemical process and has layers that cannot be seen from the surface they can take more intrusive or expensive ways to determine the quality. Meaning it is hard to check welds in the field. And repairs are difficult.
@robb1165 4 жыл бұрын
Many of the aircraft aluminum alloys are not weldable. The weldable alloys usually require heavier assemblies to get the same strength. There are many welded aluminum parts though, like intercoolers and some ducts. I have rarely seen an inspector use a go-no-go gauge. Where I worked they did look at every rivet and with years of experience can see if its correct or not. And they where picky, even to that last rivet buried in a difficult to access place.
@delboytrotter8806 4 жыл бұрын
Clever clogs!
@scottcol23 4 жыл бұрын
@@robb1165 yeah, aircraft aluminum is really soft. I describe it as almost an aluminum "foam". And cannot be welded without making a seam at the edge where the thickness would be doubled.
@Hitycooking 4 жыл бұрын
kzfaq.info/get/bejne/e8hoqtx4x5-0eJs.html
@southernracing2468 4 жыл бұрын
One more thing is it’s easier to drill out a few rivits to replace a damaged panel than to cut grind and weld a new panel
@1traxxas 4 жыл бұрын
10 episodes from now. “Supercharging our refurbished helicopter”
@Smokey_A 4 жыл бұрын
Armytrix exhaust.
@willb3018 4 жыл бұрын
But they probably won't be lowering it or lifting it....well, except for take off.
@1967lathrop 4 жыл бұрын
Nice!!
@300zxdriver 4 жыл бұрын
I don’t think so, aviation rules are very strict.
@flutube3688 4 жыл бұрын
@@Smokey_A and a carbonfiber wing 😂
@glenncocoslife 4 жыл бұрын
Always enjoy watching Billy and Simon come up with some crazy builds.
@iandavid7730 4 жыл бұрын
So pumping out rebuilds one after the other, and doing high quality videos every two days, and keeping everyone posted regularly with updates on other platforms and building your own garage and now it turns out you've been getting pilots licences on the side. Did you invent time travel to get all that done or what? Love your work by the way. This one could be a REAL showcase for your creative eye. Knock it out of the park, gentlemen and it'll be Goonzquad - Bespoke customisation solutions for all your aviation needs.
@scottyV1000 4 жыл бұрын
The Home Depot to Lowes back to Home Depot was funny - like we haven't all done that before.
@scottyV1000 4 жыл бұрын
Looks like Thomas is ready to go - he picked out his spot already.
@abhaymulgund13 4 жыл бұрын
Cant wait to see thomas on the copter😸😸😸
@hyperthermogenic 4 жыл бұрын
I think a tour of the Robinson factory is in order if you guys can find the time. This awesome and just when I think you guys cant impress me more... HELICOPTER! lol
@ericfermin8347 4 жыл бұрын
The idea of the boys flying to the beach is pretty cool
@denniss5512 4 жыл бұрын
Glad to hear you got an A&P to help out. Document EVERYTHING! Logs are required.
@tcrossau 4 жыл бұрын
When you open the fuel drain and call it jet fuel... I think they don't know anything at all when it comes to Aviation. If that robbo is running on A1 then I'll be damned
@walterhg67 4 жыл бұрын
I'm sure that as soon as they start flight school they will learn all the terminology and nomenclature of components and system on the R22. Give them time and they will learn. I wish them luck.
@RZRMINERBDR 4 жыл бұрын
Helicopters have never seemed "simple" to me, but after seeing some of the builds these guys have done, I have a feeling they'll make it look that way!
@patio6 4 жыл бұрын
They’re very simple. The physics at play is the head scratcher.
@bradesq9422 4 жыл бұрын
@@patio6 Helis are far from simple, they are very complex machines that have many many failure points. The physics as to how they fly are simple but getting everything to work perfectly is very difficult.
@patio6 4 жыл бұрын
brad esq Maybe they’re not simple to everyone but if you have the mind, they are pretty easy to understand.
@quintensmith8523 4 жыл бұрын
Wow, just WOW...Amazing! I fly a R22 and R44 and have never seen one stripped down, let alone rebuilt. Good luck Goonzquad I’ll be watching closely! So excited for this built. I’m sure you will have many flight instructors offering flight lessons, but just know I’ll be willing to help teach you or answer any questions you might have.
@martincostanzo6745 2 ай бұрын
Hey guys!!!Very Very congratulate for you !!exelent job. Thank you for showing the video with its parts from Argentina, we are really very grateful..
@_travesty 4 жыл бұрын
Me: Drink every time the boys say “dang.” Also me: dies
@user-up3iq2gp3b 4 жыл бұрын
Pls don’t. There are ppl that care about you :)
@davidsnowden9607 4 жыл бұрын
or when they say all that good stuff
@mickeytgoff 4 жыл бұрын
Mr.Wing I hope you know he is joking.
@bustertim5333 4 жыл бұрын
U would be drunk in the first 3 minutes of the video lol
@_travesty 4 жыл бұрын
buster tim you’re not wrong lol
@CCDzine 4 жыл бұрын
The heater is like on old, air-cooled Volkswagens.
@steveharleyfan 4 жыл бұрын
Isn't the motor a flat-four air cooled, just the same as Volkswagen? Simple and reliable.
@surlycrosscheck1 4 жыл бұрын
Yep. Heater box exchanges heat with outside of exhaust piping. I wish the boys would work on an old air-cooled bug.
@gmcdaniel1964 4 жыл бұрын
Hugh Evans in the aviation world we call them horizontally opposed engines. They come in 4, 6, and even some in 8 cylinder models. Air boats used to use them a lot.
@steveharleyfan 4 жыл бұрын
@@gmcdaniel1964 my motorcycle is a flat six, or I should say horizontally opposed engine. The new Goldwing.
@Hitycooking 4 жыл бұрын
kzfaq.info/get/bejne/e8hoqtx4x5-0eJs.html
@SirChaosS 4 жыл бұрын
while watching i had the random thought: "I sure hope this helicopter doesn't go the way of the boat, where you'll do 2 or 3 episodes on it, then basically forget about it." I was under the impression you shelved the boat because it was getting too cold to worry about it, but now we're in summer and i haven't heard anything, i'm wondering
@MegaDirtyberty 4 жыл бұрын
Likely will be what happens.
@stevelubs 3 жыл бұрын
You called it lol. 3 episodes
@christryker1986 2 жыл бұрын
Lol give me the lottery numbers just 3 episodes and canned to a corner 😆
@pengu4932 4 жыл бұрын
I love how your guys cat and dog and all the animals just randomly come chill with y'all
@Back2Lifenikotjr 4 жыл бұрын
The fact that y'all are actually pulling apart a helicopter is mind blowing 😂 bring that baby Back 2 Life!!
@justinpm7068 4 жыл бұрын
Back 2 life family 👍🏻
@mancaveproductions00 4 жыл бұрын
Dosent look that bad for a start, click bait.
@89ludeawakening1 4 жыл бұрын
@@mancaveproductions00 it doesn't matter what it looks like, it still has to be completely stripped and put back together regardless.
@superchargedregal 4 жыл бұрын
@@mancaveproductions00 🤡
@shaheenkhalid1083 4 жыл бұрын
Hey nico. Sugamano. I am big fan of both of u guys. Goonsquad is my inspiration. Teach them sugamano
@andrewh9629 4 жыл бұрын
I'd love to be a mile high and thinking about how small the door pins are lol
@timglass6041 4 жыл бұрын
yeah, my wife's jewelry box hinges are bigger than those.
@statementleaver8095 4 жыл бұрын
3:50 Wait a minute............. You need a man to come and see what work/improvements you have done. For safety reasons but the doors are held on with Remote Control kit car shell pins!!!
@tdela2179 4 жыл бұрын
R22s are certified for flight without doors, gets hot in the summer and with no AC you’d be glad to have the doors off
@westcoastturbos 4 жыл бұрын
Looks like a cheap helicopter. Can it fit 2 people?
@westcoastturbos 4 жыл бұрын
Is this a one man helicopter. Seems to small for two adults
@scornoyer9676 4 жыл бұрын
I flew for the US Navy for many years. That is actually one of the simplest aircraft you can have. Just use better materials than what you had where you can. Will be better, more pleasant and quieter to fly. Make it a fine ride.
@Hoshino_Rubi7 4 жыл бұрын
Nobody: Goonzquad: Rebuilding a military "F16"!!
@SixPackDan 4 жыл бұрын
Harrier
@johnpadilla480 4 жыл бұрын
They are gonna go all the way and rebuild a F-18 after the Helicopter. Just watch. :)
@tomaiger 4 жыл бұрын
nobody: likes "nobody" post everyone: is doing this 5hit...
@allendaleguitars.stpetersb4528 4 жыл бұрын
Russian submarine.
@Hoshino_Rubi7 4 жыл бұрын
@@johnpadilla480 will, I think I'm gonna wait for it. xD
@jonathand1835 4 жыл бұрын
When y’all get your new shop I’m expecting there to be a heli pad either on it or near it that’d be dope.
@rsprockets7846 4 жыл бұрын
Or a medi vac pad
@zrgarage3730 4 жыл бұрын
Coming from someone in aviation make sure you know the regulations you have to comply with
@chrisharris9841 4 жыл бұрын
I absolutely love how organized and methodical these guys are. You can really see it; it's awesome. If anyone can make an R22 better by simple innovation, it's these guys! Can't wait to see the sick paint job at the end! =D
@chrisc7619 4 жыл бұрын
Question guys!!! Are you thinking of installing a horn blaster on the helicopter???? Seriously though I am amazed at how adventurous you guys are and it's amazing. I'm 49 years old and love your channel I show your videos to my 14 year old and say look you can do anything in life... If you where Canadian I would recommend you guys for the order of Canada for services to the youth. Maybe one of our American cousins can thi k about recommending the boys for one of your rewards. Peace guys and don't stop. Love from Ontario, Canada....
@adamfoster2121 4 жыл бұрын
(Trackhawk): im the most expensive paint (R22): hold my collective....
@KiIIerhock 4 жыл бұрын
the R22 might actually be cheaper hahaha
@alexandersherrell3790 4 жыл бұрын
KillaCawk I doubt that paint has to be FAA approved so that jacks the price up.
@KiIIerhock 4 жыл бұрын
@@alexandersherrell3790 thats actually not true paint materials are mandated by the faa but as for the paint its self it doesn't have to be inspected or approved it just has to follow maintaince practices of either the airframe manual or if not available AC43.13 standard practices
@KiIIerhock 4 жыл бұрын
@@alexandersherrell3790 also if its privately registered they kinda have free range to do what ever they want under an experimental tag
@alexandersherrell3790 4 жыл бұрын
KillaCawk ok I didn’t know that I understood it as it had to be FAA approved.
@ASKTEACHERPOPONG 4 жыл бұрын
Yeah!!!! Hope you both guys come here in the Philippines using that Robinson's r22 hahaha, just kidding! 💚♥️💚💚💚🇵🇭🇺🇸🇵🇭🇺🇸🇵🇭🇺🇸
@Acula33RC 4 жыл бұрын
As an amature helo pilot myself, I'm so stoked for this build.
@jacklittle1624 4 жыл бұрын
“There’s not that much to it”, printed on the boys tombstone😥
@sterlingstauffer2915 4 жыл бұрын
LMAO!!
@markbremmer8642 4 жыл бұрын
Let's hope not. Too many projects left to be done.
@sterlingstauffer2915 4 жыл бұрын
With the helicopters grave beside them with the words: rest in pieces
@TheMrGamer1 4 жыл бұрын
I didn't even know you call a helicopter a beast but Goonzquad makes it possible
@ChristianFadel 4 жыл бұрын
"Most of the parts will be sent out to be rebuilt". Those who were worried about them rebuilding it themselves can rest easy now ;P
@mcmcmcmpomn7457 4 жыл бұрын
😂😂 some probably thought they were doing this project all by themselves
@LauS0 4 жыл бұрын
They said this in the first video too
@Minecraftfreak3535 4 жыл бұрын
yes, but they still cant assemble it by them selfs when they get it back
@KENNEY1023 4 жыл бұрын
Everyone rebuilds them this way most of the time no new paint or interior.
@domina8tor 4 жыл бұрын
@@Minecraftfreak3535 a technical inspector has to sign off on almost all of it .you dont just assemble an aircraft and hop in it and fly the FAA wouldnt be very happy about that lol
@Neicoman 4 жыл бұрын
I breathed a sigh of relief when you said you had and A & P with you and you were sending the engine out. Whew
@ingresswizard9044 4 жыл бұрын
Goonzquad touch: Armytrix exhaust for a R22.
@NomadicJulien 4 жыл бұрын
Can't wait to hear : "Let's bring this helicopter for a spin and see how it rides... There was definitely some alignment issue while we were in the air" 😅
@betacar_ 4 жыл бұрын
Let it rip!
@dannyarellano86 4 жыл бұрын
Lmao
@clay1026r 4 жыл бұрын
Or "time for some upgrades and a leveling kit" 😆
@andrewclancy2511 4 жыл бұрын
Welds crack, welding weakens aluminum, and riveted joints are stronger. You're welcome.
@motgoai1008 4 жыл бұрын
R yeskzfaq.info/get/bejne/brFgodGW0N2bY6M.html
@Gonza1000 4 жыл бұрын
It was built back in 1991. Not many people knew how to weld aluminium back then. I bet the newer ones are welded.
@hansb57 4 жыл бұрын
@@Gonza1000 In contrast to what kids under 40 think, the world was NOT invented in 1991.
@Kevin-zo6nz 4 жыл бұрын
@@Gonza1000 New manufacturing actually uses panel adhesives and alu rivets, no welding except the vertical firewall for some reason
@TheMiloking 4 жыл бұрын
@@Gonza1000 lol 1991 = Back then! NASA had spaceshuttle for 10 years for fuk sake.. Z gen kids make me laugh.
@LordYoshii 4 жыл бұрын
Houston Crosta: We're painting our logo on a helicopter Goonzquad: we'll paint ours once we rebuild the whole thing
@m1l0sev1c 4 жыл бұрын
red interior and matte black exterior 🔥🔥🔥
@bogdanmironets4685 4 жыл бұрын
When will you guys do the price reveal for the Jeep Trackhawk. In a earlier video you guys promised to do it but I haven't seen the video yet. I think many people would want to see how much the build cost you. Like if you agree 👍.
@georgejames6376 4 жыл бұрын
You guys are the talk of the KZfaq world with this build. Congratulations guys and be careful!!!
@jonathanpalacio9005 4 жыл бұрын
Hey guys I been with you guys since the blue jeep and now u came out with the helicopter, that project is gonna be fun. Highly recommended, overhaul manual, IPC Illustrated and service manual. To not damage nothing on the way out. Good luck guys
@damagedr6943 4 жыл бұрын
As a private pilot and the son of a helicopter pilot I’m so stoked for you guys. You’re opening your lives up to a whole new world, can’t wait to watch the journey!
@charlieyacklon7629 4 жыл бұрын
The a&p mechanic in me is going nuts😂
@carcomp101 4 жыл бұрын
Point out the mistakes for us normal mechanics ;)
@YouTakeNotes 4 жыл бұрын
Thomas is such a big boy now 😂 dude looking like a lion 🦁
@allendaleguitars.stpetersb4528 4 жыл бұрын
Build a roll cage in it. And put some parachutes in the compartment underneath the seat. You keep on saying tanks, you're welcome.. he'll ask the FCC if you're allowed to tint the windshield. You know it's going to be hot and the glare coming right through that thing. Blinding. Dude tanks again for the awesome videos. I know pop's is proud of ya's!!!!!!
@channell11 4 жыл бұрын
This build is the embodiment of putting the cart before the horse. Best of luck! The regulatory environment surrounding aircraft maintenance and operation is a nightmare.
@markwalderbach3366 4 жыл бұрын
You're going to need an FAA inspector as you go or it will never be deemed safe to fly.
@Falko1983 4 жыл бұрын
..might be doable as experimental category aircraft ...but i don't know for sure
@johnpadilla480 4 жыл бұрын
@@Falko1983 I believe it still needs inspector check off for any approval to fly; Even with an experimental aircraft.
@phatboizbackyardkustomz9006 4 жыл бұрын
@@Falko1983 You can't change a Standard Type Certificate to Experimental
@b1perry 4 жыл бұрын
John Padilla pretty certain there A&P buddy will be supervising the entire thing. Which is all they need to sign off on the work.
@apet1572 4 жыл бұрын
they literally say they have a certified person helping them supervise the project and all the rebuilt parts are going to be outsourced...do people even watch the vid before they comment??? wtf
@lazreganis303 4 жыл бұрын
Early squad where you at🙋🏻♂️🙋🏻♂️❤ *from mustang to choppers bcuz why not goonzquad ?*
@Skoterkaos 4 жыл бұрын
i am here
@Jojo43O9 4 жыл бұрын
me
@prvtgoaty_yt4738 4 жыл бұрын
I was the first one.
@kingtazler2571 4 жыл бұрын
I was the 10,000th one
@FUBitsGorilla 4 жыл бұрын
Present ✋
@calliekesterson1820 4 жыл бұрын
You guys also need to share an Amazon wish list for cat and dog treats and treats for you guys. That way we can support you guys in other ways.
@ssoffshore5111 4 жыл бұрын
Do you have any idea how much these guys are making of us watching and commenting on their YT videos?!?!?! They should be $uporting us! LMAO!
@thanasisargiriou9991 4 жыл бұрын
My 6year old sister literally found it interesting and started watching goonzquad too 😄 Amazing content
@decapitofamily3410 4 жыл бұрын
Every armchair "flight mechanic" and 'get-off-my-lawn-guy'... "U CANT DO IT THIS WAYYYYYY......."
@charlie1832 4 жыл бұрын
I see he’s wearing the OSHA approved steel toe slides again today
@Makka668 4 жыл бұрын
To make sure you don’t loose the screws and attachment fittings for different components, is to put all of the screws into clear plastic bags and tape them to the components. This is the way most aircraft technicians do it and the way I was taught, good luck and enjoy, I know I did.
@obamadontreadgood 2 жыл бұрын
That feeling you get when you recognize a helicopter you put at least 800 hours on :D I am about 98% certain that's the exact same R22 I spent A LOT of time flying. It was a great machine!
@gsboxerpilot71 4 жыл бұрын
As a aviation dude.. loving this. Are you going to get some sign offs for your FAA maint A&P. I'm guessing 3-5 months before its done. FAA is a pain in the neck Love it. Side note.. What's up with the new shop?
@johncollinson196 4 жыл бұрын
"Join us on the next episode where we will be rebuilding a 2017 SpaceX rocket"
@kitcarnut 4 жыл бұрын
Can't believe I'm watching these two rebuild a chopper!! Ho cool is that.
@watchfreak4961 4 жыл бұрын
You don't need AC in the summer, because in the sky it's always colder, the only thing you need is heat :)
@wills8288 4 жыл бұрын
FAA: You need two years class experience and certification to work on a helicopter. Goonzquad: Let's get to work!
@davud_kosolapenko6872 4 жыл бұрын
Nobody: Billy:and we are going to do a goonzquad touch. The touch:exhaust,turbo,new Christmas tree
@Adlerwacht 4 жыл бұрын
@Bonaoa Aoaiia Dude, his name isn't Billy. How do people don't know that yet?
@ianjohnson6835 4 жыл бұрын
please don't just cut out if this doesn't go to plan. I believe all great success requires failure to learn, and I feel your fans deserve to see the things that make you two so great.
@pksjc 4 жыл бұрын
Good friend from of mine was a helicopter pilot in Marine Corps and flew Marine 1. He is presently building his own custom helicopter from a kit and he is dropping some very serious coin as I am sure you two are as well. Please get your butts into the classroom and simulator to "know before you go." Do not want to read about you all in the obits, but I am sure you will do the right thing and get it together. Dang Son, what does this button do?
BalcevMMA_BOXING
Рет қаралды 11 МЛН
Cleetus McFarland
Рет қаралды 1,1 МЛН
Relative Motion
Рет қаралды 36 М.
whisper toys
Рет қаралды 14 МЛН
МАРТИН БОГАТЫРЕВИЧ garage
Рет қаралды 3,3 МЛН
hoang quach
Рет қаралды 53 МЛН