FINALLY A RSV4 UPLOAD! LEZZZGOOWW! 🔥

This motorcycle is BRUTAL! Your videos are also very, very good!!! Thank You.

make sure the pinch bolts on the fork bottoms aren't over torques I have seen those snap plenty of times

Gday mate im a motor trimmer form Australia. To get rid of fullness Just put the seat outside in the sun for a day or use a towel over the top of the seat and pour boil water over the towel

Hello from INDONESIA 🇲🇨

Loving the carbon fibre look, but those bolts replacing the pinch bolts would mess with my head....

The Ducati Aprilia rsv4 MV Agusta troublemakers they are as fun as hell you always have a laugh riding them

use some contact adhesive under the seat to glue that bit down. then stretch and staple

You have to say, the Italians make some great looking bikes, and then improved upon by you

Using high quality parts makes it such a better build ,with the carbon put some copper grease on the screws first and turn the screw a bit then back it out until the screw has cut a thread into the mounting lug and for the ones that have snapped use 2 part epoxy glue from the home depo ,good job looks brilliant

SO glad you finally got the pneumatic staple gun!! Life changing, isn't it?!

Been waiting for this too long!❤

Use a heat gun when installing the seat cover. Makes a world of difference

You need to use glue on your seat for the high spot

Almost full Matte Carbon fiber Aprilia rsv4 base model superbike!!! Amazing work! Italian masterpiece

Killer build......keep em going

Air tools are awesome. The Aprilia is turning out awesome!

I got a Tappezzeria on my RSV4 with memory foam. Best upgrade!

That's a thing of beaty! You sure did a great job!

for the seat. warm it up with a heatgun on low or hairdryer and THEN pull/staple it in.... that should help it settle!

CJ got me looking at copart for wrecked bikes!

Dude i follow you from Egypt can't watch your entire videos for not having much time but you are a LEGEND

I have wrapped a rsv4 seat before best thing you can do is take the cover all the way off and use some spray carpet adhesive to stick it down as Aprilia themselves do it on some of the other models using the same seat (125cc versions in Europe)

Ugh.... that RSV4 sound is soooooooo good....😍😍😍😍

Do rivets. And since it's carbon. Use washers on both sides. That way it don't Crack the carbon and has a firm grip on. When pressing it on.

That dry carbon is amazing

🎉🎉🎉Just ordered some hoodies thanks for the hookup 🎉🎉🎉 can't wait to see the north Carolina blue 💙 let's goo 😄

indonesia selalu menonton mu CJ 👍👍👍

Nice build CJ the bike is looking fire! I also rebuild bikes myself and love watching your vids keep it up.

What a bike man

cht aluminum paint. Has aluminum in it. Used on my xr1200 triple trees.

THAT'S A MASTERPIECE, CJ. Your MASTERPIECE!!

Well com back brother ❤❤❤❤❤

Broo I am in love with this colour scheme definitely worth watching your videos But you should probably upgrade your GoPro set to 12

This is about the nicest looking bike yet.

Just put a chunk of sponge under the seat cover then staple the middle back together on the back.

Put some stickers on the bike to break or highlight the carbon. Pinstripes or something. Still loving the vids and still waiting on a GSXR

Oh yes CJ another video!!!!

Amazing!!! What a mechanic you are!

Lovely bike episode😮😮❤❤❤ my dream bike

Aprilia the best ❤🇵🇹

Thanks man!

This is a much better solution for your lighting problem. I bought mine at Fleet Farm. Bergen 100 Watt LED Hi-Bay Work Light. Also buy the wireless switch to make it super convenient. Two of those will be brighter than all 10 of your fluorescent tubes😂

Needs some aprilia decals livery for sure CJ !!! and the front aprilia winglets😊😊😊

GREAT WORK BRO WHAT A BIKE !!!!

Excellent!

CJ, don't smashed this one. Good luck

🤌A work of art! Looks killer!!! 🔥🔥🔥

Use adhesive for the seat leather

Beautiful cj!!!❤

😂. That bike will get you in trouble.

I was thinking Red Rizoma Mirrors. Or half the mount in Red. To where the Mirror twists. Or just the edge's with a Red pinstripes. To tie into the Red Tail Fen would look good. Or Paint the Hand Wind deflector Red you're not a fan of. To help tie to the Tail Fen. Either way she's a Head Turner.

Great job enjoy

Having a suggestion, You could make use of plastic revet's for the flaring mounts

Big fane broo from srilanka 🇱🇰

hi CJ, my name is Ruud and I live in the Netherlands. I always look forward to a new video from you. I love how you rebuild the motorcycles and cars full of enthusiasm. I hope to see many more projects from you. I think you are an inspiration to many. maybe I missed something, but where did the BMW go? Did you sell it? Kind regards, Ruud Dekkers from the Netherlands 👍👍👍

First comment from India 😁

#carb gains #stackin carbs #carbohydrates

Beautiful frigging bike bro.. Take good care and God bless! 💪❤👍

Gotta admit the rsv4 is hot

Heat the leather or vinyl with a blow dryer to soften the material then pull it tight 😊

Bro can you post the video every 4 days if it is possible Love you from India

We demand videos twice a week (plz)

Nice work 👏🏻👏🏻

Love watching this show'

Amazing

Small nut fixed with two part resin should work on the fairings

Un seguidor desde España

Nice Ape killer

you can hold it to fire,for get that perfect fitment ✌️

nice cj

kiwww kiwwww kukk geruuuuu

Malaysia 🇲🇾☑️

awesome bike ❤

Your rotor ducts won’t last long with those nuts on, you need lock nuts. ‘Nylon may do but it all depends on how hot they get. Maybe try drilling and taping the carbon for normal screws rather than self tapers and use locktite. Carbon does look good though, keep this bike coming or try a Tuono, it’ll blow your mind

Guerreiro 🐜

Good jobb

Wow 🥰

nice!

Did I miss how cylinder’s block and valve rust was cleaned

❤❤❤❤❤❤❤❤❤

The bike is really beautiful and the brutal sound, but I don't understand the concept of a rear seat, or no seat, Aprilia stuff. 😂🤷‍♂️

Kayaknya banyak penonton dari indo

❤❤

Cj media, when a state officer inspects your bike what do they check for, cuz I have a Copart savage title bike and next month I’m getting mines inspected what should I expect? 😮

brake rotor cooling is useless, the brake caliper needs cooling. the brembo m50 used to get a fading at high speed tracks like mugello or hockenheim gp.

You did an excellent job with that bike. for how much are you going to sell it? do not forget to remove the canister to keep the heat low.

❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥

⚡💥🔥

🤘🏼

Personally i think it just needs a little something to break up all the carbon some Aprillia decals or something

O som que essa moto faz é muito bonito,diferenciado

RSV is lookin goood love the Carbon I'm slowly doing same to my Tuono. If you come across a Carbon rear wheel scoop like on the X model, I would love to know

Riv nuts should do it? I could be wrong but I personally would try that, putting the riv nut on the underside piece, then drill a hole big enough that's slightly tight to connect the upper piece with a couple washers to the underside riv nut, would that work or just rip off?

Iam waiting you bro...where you gone man😢

👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾

I would try to epoxy some nuts on the backside for screws

Keren

which Loka motorcycle here in my country does not have this model 🇧🇷

Why.... It looks SO much better stock. Its not aerodynamic now. Carbon = drag Put it back PLEASE!