I hope all of you were able to come away from this video with a couple useful tidbits of information. These are some of the hardest videos to make as there is just so much information that can be covered but it is difficult to capture it all. What are some carburetor rebuilding specifics you may want to see?

On carbs ,I dismantle everything (everything)from the beginning"in order" and ultrason them one by one ( it seems it does take longer but it doesn't in the end, in my opinion) Then I work on every single new parts. If needed changed/ upgraded them. But it's me. Cool, hope to have ride on country roads someday .👍 A grease monkey. 🇨🇵 Texting is not the same than "having a chat with drink around some bikes" but you have my respect as a motorcycle enthusiast. 👍🤝

More GOLD from B.J. here. Update from New Hampshire. ~ Almost checked into AA last week.~. A BRAND NEW 02' Bandit 600. ~ Crashed from the front. No odometer but a title. The bits and pieces define pristine. I offered $600. ~ offer accepted. Trouble I'll tell ya. Adding ANOTHER bike to the 95' cb750 Nighthawk and the 98' 1200 Bandit. Three bikes B.J. So sick. I've got an addiction here in New Hampshire. Trouble. And so ~ selling the Nighthawk. I think I've seen this one. OOPS no ~ don't remember the jeapordy theme song. What a lIfe. I'll tell ya. Thank you Thank you Thank you. Your most devoted fan, Steve from New Hampshire. 〰✨👍✨〰

A great step by step video, looking forward to the next one!

Mud Dauber should be the project name for this bike!

So cool! and I can't watch now! It's the worst! Heh. But I will be watching this very soon. I had a 1978 750 F2 that I loved. I never rebuilt the carbs, but I did balance them fairly often for flow.

Even though all Carbs work on the same physics, its interesting how different engineers in different companies come up with such different designs. Really good visuals on the carb rebuild process, and thanks for the usual little tips, like heating the pilot jet just a little bit with the wire, before final cleaning.

Carbs cleaned up great, look forward to next one. 👍🏻

Was good to see Seth in the video 👍, looking forward to seeing how this bike unfolds 👍

Congratulations !!! Thanks for a very nice and useful video !!! I hope and wish to receive a silver button this year KZfaq !!! I wish you success and development !!!

The carbs looked great when finished. Jobs like this require patience, skill and time, it’s easy to see why paying someone to do repairs and restorations is expensive.

Awesome vid BJ, perfect timing for me. Just starting my first project on a SOHC and this is what i'll hopefully be doing over Christmas and will be looking forward to more content mate. Merry Christmas from the UK

I was intimated by these carbs when I bought my CB750 about 5 years ago, but as far as 4 cylinder carbs go, they're not too bad. Early on I found a dirty set of 750 carbs on marketplace for 100 bucks that I bought for educational purposes. I was able to take them apart and clean them without the stress of screwing up the carbs on my bike. It was a great way to learn....and become less intimated. The next bike I picked up was a vintage Triumph TR6 which has one Amal concentric on it... now that's an easy carb to deal with, especially coming off the CB750.

Awesome work BJ ultrasonic cleaner brought them back like new nice job mate 👍👌🏁🏁❤️

That was an extremely informative video!! A few things to think about. First to save time, use something like O'Rilleys brake cleaner or carb cleaner (won't harm any rubber or alum) which is like $4 a can, to dissolve the varnish before ultrasonic cleaning, saves your chemical and loosens up those parts and usually saves you from having to heat up jets(which may or may not contract to their original shape, think of what annealing does). Your float adjustment was great but mention setting the floats at an angle (like you did, maybe a bit more angle) to avoid the internal float needle springs compressing and giving you a false setting. Using the wire was perfect for cleaning out those jets, but mention never to use torch files or anything that will cut metal. Also you should do an initial sync by bringing the slides to the top and adjusting them so all are even with the top of the bore. That saves time later and is good enough for those who don't have sync gauges. Maybe soaking the bottom of that float bowl (actually all the bowls) with brake cleaner might have loosened up that drain screw enough to save it, doubtful but it would have been a good precaution. All in all this was an excellent video, one of the best I have seen, mentioning the air or fuel screws location was a good stuff and really helps the inexperienced. Just saying.....

Good job brother. Thanks for sharing

Good video brother, I use a welding tip cleaner with the assorted wires to clean out the jets

Thanks for this! Just what I was looking for!

It is super helpful that you are working on the carburetor block from that angle. Most other vids covering this are with the "jet side" up. Not horizontal. Thank you.

Good to see you back my Young Friend. Don, San Jose, CA. 12-15-2023. Merry Christmas and a Happy New Year to you.

Thanks BJ that was a very detailed video of a carb clean and rebuild definitely enjoyed that one 😊😊

Watching you struggle to get those carbs off was scary. Never had carbs be that difficult to get off (thankfully!)

liked that video, it was informative and helpful.

This is an awesome video, dude! Uears ago, I bought a set of carbs for my '92 CB750 F2N, with a view to stripping and cleaning, like you did here, learning more about how they work and how they're put together...but here we are, probably 10-15 years later and I've only ever looked at them! I also have a rear or it might be a front, brake caliper that I was going to so the same with but never got around to it! One day, when all my other boring, mundane tasks arw finiahed, I can have a look? Your videos do inspire me to get out there and get my hands dirty but I'm worried that I'll bollocks something up. I need a good manual or experienced teacher to hold my hand and walk me through it! 🍻🤘💜

Incredible, extremely helpful video Mr. Brickhouse! I really appreciate you posting this. I am finishing up my K1 750 carbs right now and this was right on time for me. Congratulations on the success of your channels! I have been watching for a while and you put out excellent content every time. I’ll be watching your car channel as well. I have a 944 that I just got running….. Happy New Year to you and yours!

Excellent video...👍.

That was awesome. Carbs and the "magic" they perform can be very intimidating. Question, on all the jets, it looks like you just seated them and that's it. There isn't any specific settings, correct? The a/f adjustment and getting vacuum correct are the only external adjustments needed, correct? Again, EXCELLENT vid.

As a car guy, I'm used to Holley double-pumpers and Q-Jets...this is an insanely informative video. All I can say is WOW, nice job, great explanation. Thanks BJ!!!

The first set of 4 cyl carbs I ever rebuilt. At the time it was THE BIGGEST PAIN IN THE ********* I had experienced at that point. Of course I was 15 at the time and had basically a hammer and a screw driver ( not kidding) but, I did have a friend with a few essentials who was nice enough to lend them out. It took me 2 weeks. I learned a lot about patience though and figured out that I wanted to do that for a living ...among other things! Thank you for the vid young man. Brought back a lot of pain AND good feelings as well. Great job!

Very Professional Demonstrated 👌

Way wicked awesome content. I subscribed today and quite enjoyed today's videos. Can't wait to see that machine up and running

Congratulations ! I really like these cb 750, the Japanese engineers were very happy with this project.

Good job!

Smooth and clean 👌👌

Great work 👏🏻and I learned something new, really enjoying this refurb. Thank you 👍🏻🇮🇪

Nice job BJ. , enjoyed the video and RIDE SAFE OUT THERE!

just used my punch to remove my floats on gs750. Learned that here. thanks!

Awesome video. Picked up a few good tricks I might try on my next rebuild, especially the cardboard for the float check. Very simple and can't believe I never thought of that lol. Calipers can be a little clunky at times getting them to sit right. Sucks about the carb bowl, but what ya gonna do. Brass is tough to get out especially with such a small amount of material. At the airport I worked we pretty just drilled and heli-coil broken EGT fittings on cylinder heads because they were next to impossible to extract. Also, its interesting to see I'm not the only one that dimples the carb numbers into the bodies. It's a subtle way to keep track when they're apart. Looking forward to seeing the "Fabrication Station" in the back of the shop lol. Need more Suzuki content btw 😁 Keep up the good work dude.

Good video, I have small chip baskets with the handle I use in my ultrasonic cleaner for odds and sods, I also run the ultrasonic for a hour, it is all fun.

ive seen people were people use radiator hose picks lift up endge of the boots and spray it with wd40 and come off quite good once you work your way around it

I have been impressed with your ultrasonic cleaner results for a while now. We had a Branson at work and used their brand solution. I was never impressed with that solution. I have been using degreasers such as Purple Power on my carbs for years. Soaking the brass in it has always worked for me. Rarely do I actually use my "calibrated orifice unblocker" wire to clear blockages, but it still happens sometimes. Nice video, BJ!

Wow, beautiful new shop! Awesome you were able to get a replacement bowl. Your new ultrasonic cleaner does a great job! Great how you identify your carbs with the punch. Two questions: Where did you get your dental pick and how do you dispose of the cleaner in your ultrasonic tank when its dirty and done? Ive really learned a lot from your videos and appreciate it so much and look forward to every one of them. Thank you.

Xmods was so cool and I remember those tweezers

Clever guys who designed them🙃

You’re a good teacher. You need a young guy to mentor.

Nice thorough video BJ! I found a small dremel with all the brass wire wheels and polish wheels is a nice addition to cleaning the parts of carbs.. you mention polishing the float needle seats.. How did you do this? I have been using wooden qtips snap in half, insert wood end into a drill and then dab the tip in polish compound, insert it in the seat and pull the trigger .. seems to work good for me. but curious on how you do it as well? Thanx for the great content.

Man, the carbs on my ‘75 750F were way worse! They cleaned up good, though. Can’t wait to see the tuning episode for these bad boys. 😃

Awesome video BJ, have you ever worked on cb750 carbs that were oxidized inside the bowls. On my carb rebuild I had one carb that was so oxidized that the float posts and the main jet hole had been eaten away and all of the bowls had a white powder. The only explanation I could find is that the fuel went through phase separation and the chemical reaction caused the oxidation on the aluminum. I had to completely replace the carb so all is working now.

Witam ,dziękuje za odpowiedz.Pozdrawiam.

Thanks for the video BJ we really appreciate it. Where did you source the o-rings from for the fuel tees ?

NOICE !

Very helpful video!! Where can I find those part organizer trays?

I like to put some anti-seize on all threads that screw into the aluminum. Also, you left off the rubber boots on top of the linkage - is there a reason for that or did you just not have any at hand? Keep up the good work!

Very educational. What size is your ultrasonic cleaner? How big do you recommend for carb works?

Tremendo curro

I watched a video where this guy soaked his rock hard intake boots in a mixture of (1) part wintergreen oil and (3) parts rubbing alcohol for a couple days and they came out soft as new. Might be worth a try as this guy is meticulous with his restorations. True-Moto-Resto is his KZfaq channel.

Im definitely buying some of that carb cleaner. After watching your video on Tangents and after this one, that stuff is awesome. It is expensive, but how many uses have you been able to get out of it before taking it out of the ultra sonic and replacing it?

عمل جيد . كل عام وانتة بخير ياصديقي

👍

I use B-square flat screwdriver for stuff like that.

2:27, perhaps the last time w e’ll see it like this. 3:20, well damn. 🎵In the end, it doesn’t even matter….🎶

About the oxidation of brass: I get the idea/need of polishing stuff as brass. But if one polishes the oxide away, and exposes it to the water it will corrode, doesn't it get brittle due to that? How do you get the tarnish back on it to protect the brass? Store it in a dry room to let it oxide again? Or should one maybe apply some zapon, wd40 or gunoil? Asking cos of saltwater.

Why didn't you put the carb slide lifter pivot covers on? They're available aftermarket and aren't that expensive. I always replaced any damaged ones with new. You should have put that chrome float bowl on the inside and put the dull one out to match the other side.

So were the jet needles stuck in the emulsion tube or the main jet? Or was it the slides that were varnished into the bore?

😎😺👍👍👍👍👍

Did you paint that orange cart? Never seen that color.

Not just for the average garage "handyman"

There is a bom bom at the end.

Any solutions for obtaining titles since the Vermont loophole has been dissolved?

Cześć,a a co z projektem Benelii coś nie wyszło czy co? Tomek Polska Pozdrawiam.

Thanks for your honesty. What do you take to stay so cool. That bowl would have taken flight if it were mine. Edit. muriatic acid. That's the name our forefathers used. Hydrochloric Acid is the proper name and it will react (dissolve) brass. Its found in all sorts of stuff.

Hi buddy

Alos wenn man das mach zerlegt man vorher schon und legt denn Vergaser in das Ultraschall Gerät hinein nur so wird alles sauber

Those carb drain hoses sound a bit like your chopping through hard plastic... whew.

Sorry but I just don’t get it. Just because it was “choppered” back in the day doesn’t make it cool. Aesthetically challenging in my world

Sorry, but metal on metal makes me squeamish. Perhaps, a wood dowel.