No video
Rebuilt KA24DE Turbo First Startup! Engine Rebuild pt.5
Рет қаралды 16,355
Күн бұрынIts Alive!
Follow me on instagram @builtlikethis
Build Specs:
1995 KA24DET
block and head machined, bored to 89.5mm
wiseco 9:1 compression pistons
Cometic metal headgasket
ARP head studs and main studs
ISR RS3871 Turbo
ISR intercooler
Hallman boost controller
White bunny competition clutch
@Pynoxim1 6 жыл бұрын
Yeah, definitely the lifters that needed to settle a little bit, had the same result with my 2JZ that I recently rebuilt. Glad you're all up and running man, well done.
@BuiltLikeThis 6 жыл бұрын
Andrew Lai Wing thanks dude
@MrSpartan117fan 6 жыл бұрын
Yeah 100% the noise was the lifters , even when you hear that noise doesn't mean your engine is going to blow up . It was just because there was air in the lifters normally you bleed them before install. But then gain by the time you got the engine and got it running
@ericphelps4362 4 жыл бұрын
Ka24de doesn't have lifters it has cam over valve with bucket shim design
@boot-strapper 6 жыл бұрын
Damn dude, seems the rebuild went very smoothly. Nice job, and fk you for not letting me see it driven yet. Lol
@BuiltLikeThis 6 жыл бұрын
Chlorophant haha thanks.
@zappatx 4 жыл бұрын
Awesome video man!! I'm putting a KA24DE in my 69 Datsun 2000 so your steps in this series answered questions I had!
@Darthvolvo 6 жыл бұрын
It lives once again! Congrats on getting it back on the road!
@BuiltLikeThis 6 жыл бұрын
Darth Volvo 🤙🏼
@Alysavos-rd4tp 6 жыл бұрын
daamn nice fkn work there...!
@BuiltLikeThis 6 жыл бұрын
Alysavos15650 🙏🏼
@thatgreens1380 6 жыл бұрын
Once you do any head work the lifters are loud as hell. Give it a week lol. Nice work man!
@BuiltLikeThis 6 жыл бұрын
That Green S13 honestly made me pretty nervous it was so loud 😂 thanks dude.
@newtypenate2524 6 жыл бұрын
Nice! Excited to see what’s next
@scottc917 6 жыл бұрын
My egr plate leaked first try too had to bent it to be flush with the intake surface. Btw you did good coming from a person who's built 2 ka-t's. Good job on the rebuild.
@BuiltLikeThis 6 жыл бұрын
Scott C thanks man
@cozyboy5025 4 жыл бұрын
I got the isr egr block off plate and it’s leaking what do I do
@kinqcurlz8662 6 жыл бұрын
Lit
@jamesmtzrivera 5 жыл бұрын
Good job man!!!!!!
@Paulisthebestt 4 жыл бұрын
What plugs would you use in cold weather? Fully built KA-T
@gaberay2903 5 жыл бұрын
how did you get the valve cover that color? and what color is it?
@xxkidfromspacexx9558 6 жыл бұрын
So someone with just basic knowledge like you, would you say this was pretty simple to do? Just boosted my ka and looking into the future in case of the worst
@BuiltLikeThis 6 жыл бұрын
XxKidFromSpacexX well i got the short block built for me and that’s problably the hardest part. But the rest isnt really that hard if you have the tools and are methodical.
@JasonCabrera 5 жыл бұрын
Did you go to a school to learn all this??
@cagrangersealninja3720 4 жыл бұрын
You chose one of the worst possible oil filters available
@wilsonalonzo129 6 жыл бұрын
Where did you get your boost leak tester?
@zappatx 4 жыл бұрын
Awesome video man!! I'm putting a KA24DE in my 69 Datsun 2000 so your steps in this series answered questions I had!
Garage 54
Рет қаралды 4,3 МЛН