Awesome Restoration of Rusted Grinder
Рет қаралды 859,235
Жыл бұрынWelcome to my restoration channel! If you like restoration videos or restoration asmr videos you found the right spot! In this video I restore a Craftsman(Sears, Roebuck and CO. USA) Bench grinder that I picked at an auction for around $60 USD. This is a 1/2 H.P. Ball Bearing Capacitor Ginder.
Thanks for watching, I appreciate the view!
THE RESTORATION PROCESS
I tore the bench grinder apart and sandblasted the painted parts. We fixed the wiring and had the capacitor bench tested at our local electric motor shop. I replaced the bearings. I used a tumbler to clean up a lot of the small hardware. I wanted a more stationary base for the bench grinder so we built a new one that fastens directly to the floor. Overall the restoration turned out great and I am happy to have this bench grinder in my restoration shop. It should come in handy!
If you like what I do here, be sure to subscribe, like and leave a comment. Thanks so much for the support. I appreciate your view.
Follow me on Facebook
profile.php?...
Follow me on Instagram
/ rebuiltandrestored
Check out this Snap-On Ratchet Restoration…Mirror Finish: • Mirror Finish. Rusty S...
Check out this 1940s Dump Truck Restoration: • Turning a $40 Truck in...
Check out this old Pipe Vise Restoration: • Restoration of a Ruste...
Check out this Rusted, Stuck Vise Restoration: • Very Rusted & Stuck Vi...
Check out this Vintage Toy Restoration: • Awesome RESTORATION | ...
Check out this Old Tonka Truck Restoration: • 1970s Tonka Concrete M...
Have a blessed day!
Kev
Products used in video:
Craftsman Allen Wench Set. amzn.to/3ldpfCB
Snap Ring Pliers. amzn.to/3lgjNyX
Iwin Channel Locks. amzn.to/3Lpt3vq
Camera and filming gear:
Main Camera. amzn.to/428GF3Y
Video Camera. amzn.to/3JD7J41
Main len. samzn.to/3JDIL4F
50mm Lensamzn.to/3mUZZBt
Disclaimer. All links above are affiliate links. I make a small commission if links are used.------------------------------------------------------------------------------
#restoration
#restore
#tool restoration
#vintage restoration
@Titanykus 9 ай бұрын
This is my new favorite restoration channel, forget Netflix of Amazon, a beer chips and this video, no talk all show and tell, the way I like it. Cant wait for a vintage bicycle restore, like a Raleigh or something or a vintage table fan.
@RebuiltRestored 9 ай бұрын
Thanks much! Glad you enjoy it! I do have an old fan that needs redone at some point. Thanks for the comment and have a great day!
@MrFireman164 8 ай бұрын
This was 32 minutes of free therapy for me, thank you 🙏🏻
@RebuiltRestored 8 ай бұрын
Awesome! Glad you enjoyed! Thank you for watching!
@joeyb3102 3 ай бұрын
I've probably watched a hundred different restorerers on YT and you're the first one I've seen lay down a good weld. Thank you
@RebuiltRestored 3 ай бұрын
Thanks. My brother is the welder! I’ll tell him!
@harmlesscreationsofthegree1248 9 ай бұрын
When things are built to a high quality standard, they are worth restoring and rebuilding. You will never see a better made grinder than this again, and now it’s restored it will last another lifetime. Outstanding!
@RebuiltRestored 9 ай бұрын
Thank you very much! I appreciate that
@mexicanpower544 9 ай бұрын
This press has worked like a charm for my projects kzfaq.infoUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!
@RebuiltRestored 9 ай бұрын
It is very stable!!
@davidsage9966 Жыл бұрын
Really appreciate there being no music - this is a really cool restoration!
@RebuiltRestored Жыл бұрын
Thanks much! I appreciate it!
@Cobra-ky9bt Жыл бұрын
I remember those old plugs from way back. Never thought I'd see one again. I've not thought about them in so many years. It brought back pleasant memories of my great-grandmother's house.
@RebuiltRestored Жыл бұрын
Awesome! Glad to bring back some good memories! Thanks for watching!
@bixby9797 Жыл бұрын
New Craftsman Tools to rebuild an old Craftsman Grinder. Nice
@RebuiltRestored Жыл бұрын
👍 thanks!
@tkskagen Жыл бұрын
Watching items that were "Master Manufactured" being taken care of makes my heart "pitter-patter"!
@RebuiltRestored Жыл бұрын
Lol good deal! Thanks for watching!
@LynxStarAuto 9 ай бұрын
Watch out that might mean a pacemaker is in your future! 😂
@barnycanuck6234 Жыл бұрын
Possibly the best balanced grinder ever made. When new it would spin for 3 minutes after being shut off. Mine bought in 1972 are both still running fine.
@RebuiltRestored Жыл бұрын
Awesome! Thanks for the comment!
@garyjones2582 Жыл бұрын
I was hoping to see some flying tools.. So many tools, so little time... Very nice restoration.. color choices were perfect... Until next time, take care my friend...
@RebuiltRestored Жыл бұрын
Lol thanks much! Have a great day!
@charlesreynolds2798 Жыл бұрын
That torch in the cabinet awesome.
@RebuiltRestored Жыл бұрын
Letting it idle
@IratePuffin 8 ай бұрын
That metallic rustoleum color was nice!
@RebuiltRestored 8 ай бұрын
Thank you. It’s kind of on the idea of the original
@The_Bearded_B 7 ай бұрын
Very nice work
@RebuiltRestored 7 ай бұрын
Thank you!
@caterpillart5662 Жыл бұрын
Good job bud you really got you stuff together i would have gave up on the electrical part. The part i liked the most was when you took a photo of the electrical stuff and you put “for my memory” i found out that that was the funniest part of this video😂
@RebuiltRestored Жыл бұрын
🤣Thank you very much! I appreciate it!
@williamvaughn2938 11 ай бұрын
Same here
@matthiasmartin1975 Жыл бұрын
I like the sign on the wall.
@RebuiltRestored Жыл бұрын
Thanks much! I appreciate it!
@ultrapureblood1311 Жыл бұрын
Great job, good for another 50 years. As a boomer, it warms my heart watching a Craftsman tool restored to it's former glory.
@RebuiltRestored Жыл бұрын
Thanks much! Glad you enjoyed!
@wakcedout 8 ай бұрын
This looks like it’s from 70s maybe early 80s. Definitely looks like a model I remember seeing in the garage that my dad had. He use to brag craftsman for the lifetime warranty replacement. Guess we finally got the answer as to what lifetime they meant. Regardless of what decade this grinder was made in, it was made back when they made things to last. Even as a kid the 80s was a hell of a time to be alive.
@cavisco Жыл бұрын
Love the old square body craftsman grinders. Yours was made by Packard Electric.
@RebuiltRestored Жыл бұрын
Ok thanks for the info! I appreciate it!
@keithstegall1961 Жыл бұрын
I like your close-up work with the camera.
@RebuiltRestored Жыл бұрын
Thank you!
@banditman142536 9 ай бұрын
Yet another great video. You are spoiling us. Oh but the the red vixen of a trolly jack has stolen my soul. You are the chosen one. You are the Captain of restoration. May your tools get bigger and brighter. May you get many many sponsors
@RebuiltRestored 9 ай бұрын
Thank you very much! Glad you are enjoying! However, I am still learning! :) have a great day! 👍
@Occuria1 11 ай бұрын
Back when Craftsman Tools were good.
@RebuiltRestored 10 ай бұрын
True! They don’t make ‘em like the use too! Thanks for the comment!
@sethh8892 5 ай бұрын
Back when the logo had "MADE IN THE USA" on it😂
@user-by4mc6wq3s 7 ай бұрын
Well done, good approach to business😊😊
@RebuiltRestored 7 ай бұрын
Thank you very much!
@BITEBOC Жыл бұрын
Good job sir. She now has a new lease on life.
@RebuiltRestored Жыл бұрын
Thank you very much! Happy New Year!
@BITEBOC Жыл бұрын
@@RebuiltRestored Happy New Year to you too.
@gqunder 8 ай бұрын
Another amazing Job !! waiting on the little truck , enjoyed it thank you
@RebuiltRestored 8 ай бұрын
Thank you very much! Glad you enjoyed!
@jonascazares153 7 ай бұрын
Craftsman still my favorite tool brand. Grew up going to sears with my dad to buy tools regularly. Great job restoring that bench grinder. 👍🏼
@RebuiltRestored 7 ай бұрын
I remember going to Sears as well! 👍 thanks for watching! Have a great day!
@unkjason 6 ай бұрын
Yeah, Sears was my favorite store at the mall for most of my life.
@RebuiltRestored 6 ай бұрын
@@unkjasonsuch a good store. As a kid, I was all over that place.
@GordiansKnotHere Жыл бұрын
Just like the title says "Awesome Restoration of Rusted Grinder". Great work man!
@RebuiltRestored Жыл бұрын
Thanks very much!
@gmtech26358 Жыл бұрын
The classic block grinders are bulletproof. I have my grandfather's and use it without worry.
@RebuiltRestored Жыл бұрын
Very cool! Thanks for the comment!
@tomdale1313 Жыл бұрын
ARTISAN FOR SURE, tanks for sharing...
@RebuiltRestored Жыл бұрын
Thanks so much! Appreciate it!
@adriananderson486 8 ай бұрын
The already lit torch in your chem cabinet was a JUMP SCARE for me!😱🫣🤔😂
@RebuiltRestored 8 ай бұрын
Lol I didn’t mean to scare ya! 😂
@snappyrepairs6482 2 ай бұрын
Can't believe I had to scroll down to 11 comments before I got to someone talking about a lit torch in the cupboard
@jfleser88 Жыл бұрын
I love how methodical you are in restoring things. Great work.
@RebuiltRestored Жыл бұрын
Thanks much!
@justinmcclanahan6036 10 ай бұрын
Nice restoration of the old grinder & glad you kept the original factory plate that they riveted on the front of it & the other grinder wheels that was on it is still good,you can keep them back for spares & that's nice that you put a wire wheel on the other side of the grinder
@RebuiltRestored 10 ай бұрын
Thanks much! And thanks so much for watching! Have a great day!
@justinmcclanahan6036 10 ай бұрын
@@RebuiltRestored You're welcome
@jeffr0 Жыл бұрын
really first rate restoration made me a subscriber
@RebuiltRestored Жыл бұрын
I appreciate that! A very Happy New Year to you!
@paulpaulos7386 10 ай бұрын
Awesome how you bring old back to life, love the recycling ben!
@franciscojaviercaotejero488 Жыл бұрын
Eres un fiera tio
@RebuiltRestored Жыл бұрын
Thanks you! 😂
@htrestore Жыл бұрын
Needless to say, this video is amazing.
@RebuiltRestored Жыл бұрын
Thanks very much!
@ENWILSON 9 ай бұрын
This is my favorite tool in your shop. I had seen it in other videos and did not know it was a restoration.
@RebuiltRestored 9 ай бұрын
Thanks! This is a nice unit to have for sure. Thanks for the comment!
@Beenthere5409 9 ай бұрын
Sure turned out nice!! Great job.
@charleslanier1992 Жыл бұрын
That is a nice grinder and stand. Love the old craftsman line of shop tools. All cast iron solid. I really hope you do more of this craftsman line of shop tools.
@RebuiltRestored Жыл бұрын
Thank you very much! The next video isn’t a craftsman but who knows in the future! 👍👍
@wileycoyotesr8623 Жыл бұрын
You did a fantastic job. Good the lamp shade wasn't damaged. The cord plug is top quality. Always important to have solid safe electrical connections. A Craftsman restored a Craftsman tool.
@RebuiltRestored Жыл бұрын
Thanks! And yes the lamp shade was in great shape! Thanks for watching and Happy New Year to you!
@MichaelRollo-xq6fw 14 сағат бұрын
Amazing skills and soothing presentation. Maddening organization and lay-out. Cinematography, sequencing, and directing: excellent. Haskell Wexler would blush. I too always keep my torch running in the locker. Never know when you need it STAT ! I can almost hear your narration, but maybe that's just because we think alike. The Greatest Love Story Ever Told (TGLSET) indeed. Thanks for your witness to the living and loving God. Restoration forever.
@ransomdaniels8395 6 ай бұрын
Better than new!!!😊😊😊😊❤❤❤❤❤❤❤
@RebuiltRestored 6 ай бұрын
Thank you very much!
@tobyw9573 Жыл бұрын
I had one just like that one - A blast from the past.
@RebuiltRestored Жыл бұрын
Awesome! Thanks for watching!
@TapeSan1 6 ай бұрын
Awesome job! Really enjoyed watching your work! ✌Greetings from Italy 😉
@RebuiltRestored 6 ай бұрын
Thank you very much! Greetings to you as well! Have a great week! 👍
@lordieshepherd 9 ай бұрын
So good. What a masterpiece.
@RebuiltRestored 9 ай бұрын
Thank you very much and thanks for watching!
@AlanG58 Жыл бұрын
Wonderful job on this old machine! They sure don't build them like this anymore.
@RebuiltRestored Жыл бұрын
Thank you very much! Yes, this was built well.
@zekecorder8226 Жыл бұрын
Very good job. Love to see old tools restored and put back into service. I wish I had a metal lathe and milling machine, but too late now. I'm over 70, no time to begin learning. My dad took a machine shop course in high school and at one time could operate a metal lathe, but I do woodworking and cannot begin to weld or do anything with metal. Oh well, maybe next incarnation?
@RebuiltRestored Жыл бұрын
I would like a lathe as well however, I don’t know to operate one. And it’s not to late to learn! Thanks for the comment! Have a great day!
@marcelovalenzuela8081 Жыл бұрын
Jaja buen comentario saludos desde Uruguay 🇺🇾 nunca es tarde vamos arriba abrazo
@AndreasEUR Жыл бұрын
NEVER too late! If you have space then do it.
@josephnavarro3620 9 ай бұрын
It's never too late buddy. You're 70 but commenting on KZfaq videos so you're very capable. Find something in your area like a machine shop or college campus or somewhere where you can donate some time and also learn the skill that you want to learn. Go do it. Ask the worst they can do is say no. Then go ask again. You can do it.
@bryanphillips6088 Жыл бұрын
I actually have this exact same grinder, was my grandfather's. Made many knives and swords with it, this one will definitely serve you well in your shop.
@RebuiltRestored Жыл бұрын
That is awesome! Thanks for the comment!
@normmcrae1140 Жыл бұрын
LOVE the OLD machines - Usually FAR better quality than the crap they build now!
@RebuiltRestored Жыл бұрын
Very true. They don’t make ‘em like they use too. Thanks for the view!
@relaxation_therapy 9 ай бұрын
Awesome rebuilt!
@RebuiltRestored 9 ай бұрын
Thank you very much!
@byOldHand Жыл бұрын
It always makes me happy to see an old or antique being saved. well done, very nice work.
@RebuiltRestored Жыл бұрын
Thanks much! I appreciate it. I plan to keep this one in my restoration shop! Merry Christmas!
@giovannidalcanto155 Жыл бұрын
@@RebuiltRestored /
@herbholmberg4474 9 ай бұрын
Beautiful restoration. I restored my block grinder too, but did not go nearly as in depth as you did. I really like how you stuck with the original color scheme.
@RebuiltRestored 9 ай бұрын
Thank you! And I actually get mixed feedback on the color but I like it. Thanks for watching 👍
@herbholmberg4474 9 ай бұрын
@RebuiltRestored You will never please everyone with color choice, but you just can't beat original if you ask me. Keeping original color makes something look new, drastic changes like red, blue, green, etc. screams repaint!
@herbholmberg4474 7 ай бұрын
I could not agree more!
@lavie328 4 ай бұрын
Good job. Looks real nice
@michaelbell7465 6 ай бұрын
I have the same Craftsman Bench Grinder my father bought in the 60's.
@RebuiltRestored 6 ай бұрын
Very cool! These are pretty sweet. Beefy machines. Thanks for watching and have a great week!
@mrgodBG Жыл бұрын
rly nice restoration
@RebuiltRestored Жыл бұрын
Thanks you very much!
@leonardolobo4370 7 ай бұрын
Um grande profissional 🎉😂
@RebuiltRestored 7 ай бұрын
Thank you very much! I appreciate it!
@wjotto Жыл бұрын
Satisfaction, Nice Job!!!
@RebuiltRestored Жыл бұрын
Thank you very much!
@TheDriver454 Жыл бұрын
great job...i only have one little thing to add...unless you want to blast the paint on the wall behind it..some square tubing and some container to catch the debris from grinding would be a last finnishing touch :)
@RebuiltRestored Жыл бұрын
Thanks for the advice! I thought about adding some dust collection at some point and yes that would keep the wall Much cleaner! Thanks for the comment!
@dannyhenson3141 Жыл бұрын
Wow u did a fantastic job on it. It looks great
@RebuiltRestored Жыл бұрын
I appreciate it!
@dannyhenson3141 Жыл бұрын
@@RebuiltRestored Your welcome. You did a great job
@michelecrown2426 Жыл бұрын
I can't believe you found one so complete and for that price, what a find. Someday I hope to be so lucky. Beautifully done.
@RebuiltRestored Жыл бұрын
Thanks much! I’m happy with it! Have a great day!
@mikeking7470 Жыл бұрын
I have the same grinder, not quite so complete, but gave $35.00 for mine. They are out there but you need a local seller, shipping would kill you.
@Beenthere5409 Жыл бұрын
Shipping not too bad. I sold one from PA and shipped it to TX. $40.
@steve-ph9yg Жыл бұрын
I have the same grinder without the light
@johnwilliams1223 6 ай бұрын
I’m here for the next cool restoration, and of course to see the mouse.
@RebuiltRestored 6 ай бұрын
😂 thanks for the support! I appreciate the view! Have a great week!
@ELMANN1000 Жыл бұрын
I love old tools. Keep saving them!
@RebuiltRestored Жыл бұрын
Thanks! I have projects in the works. Thanks for watching!
@jackaldesign1196 8 ай бұрын
A remarkable rebuild and restoration. I too restore tools rather than buy new and can appreciate the effort you put in. With brain and hand, a job masterfully done! Thanks for sharing!
@RebuiltRestored 8 ай бұрын
Thank you very much! Keep up the good work and have a great day!
@sheldonshelley3949 Жыл бұрын
Hard to explain but this eases my anxiety. Enjoyed the humor as well. Excellent work and color choices! Subscribed
@RebuiltRestored Жыл бұрын
Thank you very much! I’m glad you enjoyed! I appreciate the support!
@JustAnotherGoddess52 2 ай бұрын
Gracias! Me recuerdo de mi juventud, trabajando con mi abuelo. Magnifica restoracion!
@RebuiltRestored 2 ай бұрын
Muchas gracias!
@arnaldocarvalho8990 Жыл бұрын
Great job
@RebuiltRestored Жыл бұрын
Thank you very much!
@shanesgettinghandy Жыл бұрын
Nice job. These projects (and videos) take an awful lot of time. Much respect. Most my videos are substantially smaller projects, and they still take a while!
@RebuiltRestored Жыл бұрын
Thanks @shanesgettinghandy! I appreciate it! Thanks for the view.
@emiliodonate Жыл бұрын
Incredible work. I like the paint scheme a lot too.
@RebuiltRestored Жыл бұрын
Thanks! Finally someone likes the paint! 😂😂👍👍
@josecarmona8058 Жыл бұрын
your restoration was very cool!
@RebuiltRestored Жыл бұрын
Thank you very much
@AndreasEUR Жыл бұрын
Wow, the difference in sound between old and new bearings
@RebuiltRestored Жыл бұрын
Thanks!
@larryrizzo736 Жыл бұрын
Very meticulous, fine craftsmanship!
@RebuiltRestored Жыл бұрын
Thanks you very much! Happy New Year! 👍👍
@quantumleap359 Жыл бұрын
Nice restoration, beautiful welding. Bravo!
@RebuiltRestored Жыл бұрын
Thanks much! Thanks for watching!
@petechampagne4893 9 ай бұрын
Great work as always. Love that you use restored tools to uh...restore tools. Ha ha
@RebuiltRestored 9 ай бұрын
Thanks you! 👍
@jjsisco 3 ай бұрын
Better than new, excellent workmanship
@RebuiltRestored 3 ай бұрын
Thank you very much!
@amitbhattachariya9357 Жыл бұрын
Excellent Restoration work. Very precise.
@RebuiltRestored Жыл бұрын
Thank you very much!
@paulquinn5260 Жыл бұрын
What a pleasure to watch. To see this tired old machine but still with life in it bought back to its former glory. Well done Paul uk 🇬🇧
@RebuiltRestored Жыл бұрын
Thanks Paul! I appreciate it! Have a great New Year! Blessings!
@scottkailey1 9 ай бұрын
It's to bad they don't make them like that anymore, very nice job sir.
@RebuiltRestored 9 ай бұрын
Thank you very much! 👍
@markchizmadia2004 5 ай бұрын
Your restoration work and attention to detail are top-notch! The old school receptacle is icing on the cake. The human mind and the human hands are truly awesome machines !
@RebuiltRestored 5 ай бұрын
Thank you very much!
@CrustyRestorations 9 ай бұрын
Amazing restoration job, keep.up the good work 👍
@RebuiltRestored 9 ай бұрын
Thanks much!
@darrendurkee2 Жыл бұрын
Incredible job Mr. R&R!! Lot’s of hard work went into that!
@RebuiltRestored Жыл бұрын
Thanks 👍
@coreyyoung186 Жыл бұрын
Very nice job
@RebuiltRestored Жыл бұрын
Thank you very much!
@ingilizanahtar644 Жыл бұрын
İş makineleri ve endüstriyel dekoratif ürünler restorasyonu izlemek keyifli
@RebuiltRestored Жыл бұрын
Thank you!
@duginvirginia5737 Жыл бұрын
Excellent work. I enjoy the fact they you took time to do the best paint matches that you could and used proper rivets for the data plate. So many times I see people use pop-rivets for this.
@RebuiltRestored Жыл бұрын
Thanks much! I appreciate it! Thanks for watching!
@131dyana Жыл бұрын
Great restore thanks for sharing.
@RebuiltRestored Жыл бұрын
Thanks so much for watching! Have a blessed day!
@_lars Жыл бұрын
Beautiful work, and the torch was funny. :)
@RebuiltRestored Жыл бұрын
😂 thank you very much!
@davidflarrety9655 9 ай бұрын
Lovely work
@RebuiltRestored 9 ай бұрын
Thank you!
@brianwood5220 Жыл бұрын
Such a beautiful job, you should be proud. Thanks for sharing.
@RebuiltRestored Жыл бұрын
Thank you very much!
@asyouwererestorations8964 Жыл бұрын
Very nice! A good bench grinder with wire wheel, polishing wheel, and grinding wheel combination should be a must for any shop.
@RebuiltRestored Жыл бұрын
Thank you! And yes, I am happy to add this one to my shop! Have a great day!
@larrykelly2838 Жыл бұрын
Great restoration, great verse.
@RebuiltRestored Жыл бұрын
Thanks!
@instrumentfixer35yearsexp90 Жыл бұрын
Bravo ! bravo! You used a grounding line cord !
@RebuiltRestored Жыл бұрын
Thanks! Happy New Year!👍👍
@sushimanunit356 Жыл бұрын
Hermoso simplemente hermoso. Manito arriba y suscribo. Gracias por compartir tu restauración. Saludos desde Luján Buenos Aires Argentina.....
@RebuiltRestored Жыл бұрын
Greetings to you! Thanks for the comment and for subscribing! I appreciate it!
@Dragon.583 6 ай бұрын
I need such a machine
@RebuiltRestored 6 ай бұрын
Thanks! It is handy!
@bambino100011 Жыл бұрын
That’s awesome!! Now you have a wheel grinder!
@RebuiltRestored Жыл бұрын
Thank you! Have a great day!
@soulcatch 10 ай бұрын
14:45 OSHA had a heart attack.
@RestorationVideo Жыл бұрын
*_The original is one of my favourite restorations. You guys do top work. Seriously impressive effort and results._*
@RebuiltRestored Жыл бұрын
Thanks much! Happy New Year! 👍👍👍
@More-Space-In-Ear Жыл бұрын
Awesome restore buddy, quite fancy one of those beasts in my workshop, last longer than the ones we get these days that's for sure. We'll done ✔️
@RebuiltRestored Жыл бұрын
Thanks much! I appreciate it!
@michaellawrence6677 Жыл бұрын
That was pretty cool. Great job.
@RebuiltRestored Жыл бұрын
Thank you very much!
@markjaycox7524 Жыл бұрын
Well done
@RebuiltRestored Жыл бұрын
Thank you very much! I appreciate it!
@billboyles7469 Жыл бұрын
Fantastic job. I love to watch videos that don’t have a bunch of unnecessary talking. Good skills too. I’m a new subscriber for sure. Thanks.
@AnDIY_Handmade_Restoration Жыл бұрын
Excellent restoration of a good instrument. I hope to see it at work in your next restoration projects.
@RebuiltRestored Жыл бұрын
Thanks! You’ll see it again! 👀
@billybike57 Жыл бұрын
Dang! I wish when I opened up my cabinet my torch was already burning 🔥 lol
@RebuiltRestored Жыл бұрын
Saving time where I can.
@jacksnow1703 9 ай бұрын
Nice work. Thanks for sharing.
@RebuiltRestored 9 ай бұрын
Thanks for watching!
Unique Things
Рет қаралды 280 М.
Restoration In The Back Room
Рет қаралды 682 М.
Hand Tool Rescue
Рет қаралды 898 М.
Rusty Shades Restoration
Рет қаралды 3,1 МЛН
Ruslan Bogdanov
Рет қаралды 7 МЛН
НОВЫЕ ВАЙНЫ
Рет қаралды 4 МЛН