Recalbox Raspberry Pi 5 Retro Game Emulation Pi5 Setup Guide

Рет қаралды 15,725

Күн бұрын

This guide will step you through the installation of recalbox on your Raspberrry Pi 5. We'll cover the entire setup from beginning to end, including writing the image to the microSD card, how to copy your games & BIOS files, scraping artwork, some advanced setup and more. For more Raspberry Pi 5 content, please see my written guide here: wagnerstechtalk.com/rpi5
Chapters
00:00 - Introduction
00:40 - Stuff you'll need
01:23 - Install Raspberry Pi Imager
01:53 - Write recalbox to the microSD card
03:08 - Connections & recalbox First Boot
03:54 - Turn off background music & keyboard usage
04:41 - Map Controller
05:27 - Network Connections
06:39 - Copy BIOS and ROMs (games)
09:00 - Copy directly to microSD card
09:37 - Update Game Lists
10:03 - BIOS Check
10:22 - Scraper for artwork & game info.
11:06 - Start & Exit a game
11:37 - Advanced Settings/Change Emulator
12:39 - Properly Shutdown Recalbox/Pi5
12:56 - Outro
Items shown in this video (Affiliate links - thank you for your support!)
• Wired Controller for Xbox 360: amzn.to/3wGvYdA
• Memory Card Reader Adapter: amzn.to/3ThqzBE
• Raspberry Pi 5 Starter Kit: amzn.to/3VdcEim
• Micro SD Card 128GB 5-Pack: amzn.to/49Mn2SI
Items shown in this video (non-Affiliate links - thank you for watching!)
• Wired Controller for Xbox 360: www.amazon.com/gp/product/B07...
• Memory Card Reader Adapter: www.amazon.com/gp/product/B0B...
• Raspberry Pi 5 Starter Kit: www.amazon.com/CanaKit-Raspbe...
• Micro SD Card 128GB 5-Pack: www.amazon.com/gp/product/B07...
*As an Amazon Associate I earn from qualifying purchases at no additional cost to you.
Helpful Links
• 30% Off Disk Genius Pro code: DG30-YUTE-STPR (website: www.diskgenius.com/profession... )
• Raspberry Pi Imager Download: www.raspberrypi.com/software
SUBSCRIBE for the latest Wagner's TechTalk at:
kzfaq.info...
Feel free to ask us a question in the comments below or visit our website, we try to answer most questions that we can.
Email: wagnerstechtalk@gmail.com
Website: wagnerstechtalk.com
Or join us on one of the following social media sites...
Facebook: / wagnerstechtalk
Twitter: / wagnerstechtalk
#raspberrypi5 #recalbox #emulation #wagnerstechtalk #wtt

Пікірлер: 58

@TomDay-so2pw 2 ай бұрын

no emulation images on the pi imageing software anymore ...

@WagnersTechTalk 2 ай бұрын

That's a bummer. Instead, download the Pi5 image from www.recalbox.com/download/stable/rpi/ , then you can use this method to write the image directly: wagnerstechtalk.com/common/#Write_Image_with_Raspberry_Pi_Imager

@g8keeper22 2 ай бұрын

It's there. For some reason the option isn't available when you specifically select the Pi5, but if you view ALL available images, the Pi5 recalbox images is one of the choices.

@naturescritter4691 2 ай бұрын

Go into imager. Select No filtering. OS option has Emulations there and recalbox is available for Pi 5. Retropie is only available up to RPI 4/400

@DarksoldierX2 4 ай бұрын

I plan on doing the same exact thing. I just bought this same exact Raspberry Pi 5 kit too. It gets here on Saturday!

@WagnersTechTalk 4 ай бұрын

Awesome, let me know how it goes for you!

@MashTec 4 ай бұрын

Great tutorial video on HowTo setup and configure Recalbox on a Raspberry Pi. Always appreciate the extra Tips and Tricks along the video. Thanks again for this helpful video. BTW: i just started working on my first video about emulation on a raspberry pi. I‘m glad i decided to get one, they have a great community.

@WagnersTechTalk 4 ай бұрын

Thank you so much MashTec! Awesome to hear you picked up a Pi, did you get the Pi4 or 5? They are awesome little computers, not sure if I ever shared the robot I built using a Pi 3B+ from scratch (all custom programming + electronics). That was a fun project but a ton of work. One of these days I may revive it. It's just really time consuming. Pi's were born to emulate, looking forward to seeing what you come up with! I know it will be awesome 😎

@MashTec 4 ай бұрын

Hi Jon, i got a Pi4b just two month before they released the Pi5. But i‘m still happy with this little guy. My first idea wasn‘t to use it for emulation, but then i got this ONE Christmas present and the idea for a new project was born (i don‘t want to spoiler). I‘m pretty happy with the emulation power. I‘d be interested in the emulation limits if the Pi5. You may consider making a video about that?

@serkan4370 4 ай бұрын

great tutorial, thank you for your time and efforts. One question please, can I use RGB Pi cable with Raspberry pi 5 and this Recalbox OS?

@WagnersTechTalk 4 ай бұрын

Thank you, I'm not sure about RGB-Pi, I don't own one of those adapters.

@Allazander Ай бұрын

I've got Retropie on a Pi 4B, works pretty good though there are some issues with some games. I'm hoping the new 5 I just got will do better and I'm going to try Recalbox on it. Thanks for the video.

@WagnersTechTalk Ай бұрын

Very welcome, if you have an extra microSD, may also want to try out Batocera after Recalbox. You can find a video about it here: kzfaq.info/get/bejne/jbqZeNx3x9W5eoU.html .

@Allazander Ай бұрын

@@WagnersTechTalk Extra TF cards are never an issue, lol. For the 5, I cloned the original boot TF to an NVMe so I can keep my usual OS and apps on the NVME yet boot to card if one's installed, the NVMe if no tf is present. I'm keeping that tf card just in case something happens to the NVME but I've got several 64g cards laying around so I'll watch the Batocera video. I still haven't finished setting up the Recalbox, haven't even played a game on it yet... I procrastinate a lot, it's the one thing I'm good at.

@WagnersTechTalk Ай бұрын

@@Allazander Sounds like me and making new videos lately lol. I'm finally working on my next one

@Allazander Ай бұрын

@@WagnersTechTalk Well, I put a few games on the pi 5 with Recalbox this morning, that 'share' folder does make that much easier for Windows users vs Retropie. Every game I tried worked just fine, whether ones I added or preinstalled. I watched your video on Batocera as well and may try it later. Thanks again.

@WagnersTechTalk Ай бұрын

@@Allazander Very welcome, happy to hear things went smoothly!

@deepthoughtsshallowworld Ай бұрын

Your video has been a great help thank you very much. I am running into a no start issue with my n64 games. How do I get started with the n64 and gamecube and playstation, I am not sure if I have a bios issue or a roms issue.

@WagnersTechTalk Ай бұрын

Very welcome! Please see 10:03 for BIOS check and 11:37 to try a different emulator. Let me know if that helps!

@ciphfer6925 4 ай бұрын

Great Tutorial! Thank you! Can this be used as OTG for AtGames ALU using the controls on the machine?

@WagnersTechTalk 4 ай бұрын

Absolutely! I may make a short video on how to set it up, but connecting over OTG on the ALU works well.

@ciphfer6925 4 ай бұрын

That would be Phenomenal! Thank you for all that you do. @@WagnersTechTalk

@WagnersTechTalk 4 ай бұрын

Sorry, not meaning to spam you. But, I documented how the buttons were mapped between Recalbox and the ALU here: wagnerstechtalk.com/rpi5/#Recalbox_with_Legends_Ultimate_Arcade . I may post a video in that same location at some point, but these were the steps I took.

@jtsales6781 Ай бұрын

Thanks for the setup help! Just wondering now how to get Naomi to work i keep getting "Mandatory BIOS Missing". If any type of help would appreciate it. Thanks once again!

@WagnersTechTalk Ай бұрын

Very welcome, please see 07:00 for an explanation on BIOS files. You'll need to locate those for Naomi and copy them to the \bios folder.

@jrodracing6660 4 ай бұрын

Could this be used for modded arcade 1up cabinet ?

@WagnersTechTalk 4 ай бұрын

I don't see why not, as long as you have an HDMI input and map the controls should work fine. I only have the SW Arcade1UP, but others have likely used recalbox for that.

@Tullerion 2 ай бұрын

I cant seem to be able to add Playstation 1 to recalbox on pi 5.. is it not supported? had to add the psx folder to bios, added bios' to that folder but still says theres no bios available when booting recalbox.. even after restarting..

@btenta Ай бұрын

You don't make a psx folder for the bios. Just put the files in the main bios folder.

@104d_3rr0r_vince Ай бұрын

I wish there was a proper retropie version for Pi5. Is this better than Batocera?

@WagnersTechTalk Ай бұрын

Hopefully we'll see RetroPie for the Pi5 released soon. Recalbox doesn't support as many emulators as Batocera, both are pretty good and getting better. I'd say check each out on separate microSD cards and see which you personally prefer.

@104d_3rr0r_vince Ай бұрын

@@WagnersTechTalk Retropie 😀 I can do whatever I want with that, it's customizable. I lost hope that it will be released for Pi5. I have a non-official version that some kind works 😕

@WagnersTechTalk Ай бұрын

It's not uncommon for RetroPie to come out 8-10 months after a new Pi has been released. The same happened with the Pi 4. There were unofficial builds, but the official build came much later.

@416nWild 2 ай бұрын

I want to add more emulators. How do I do that?

@WagnersTechTalk 2 ай бұрын

You may want to post your specific emulator question on their Discord or forums here: forum.recalbox.com

@SantanaSasquatch 3 ай бұрын

How do you get rid of the borders?

@effortlessrob1114 Ай бұрын

Turn off recall box overlays in game settings

@robdfar 4 ай бұрын

pretty cool but there needs to be an option to get rid of the boarders

@christophercroft2940 4 ай бұрын

What are boardes? New to emulation/ recalbox so im not familiar with lingo thanks in advance

@js-ml4sz 4 ай бұрын

There is. You just change the resolution

@anamoly01 4 күн бұрын

just change the aspect ratio to 16:9 in advance emulator setting

@tiua2153 4 ай бұрын

My recalbox network directories have 0 bytes free size :(

@WagnersTechTalk 4 ай бұрын

Are you using a microSD card, if so what size is it? Have you tried copying files and if so, what happens?

@tiua2153 4 ай бұрын

@@WagnersTechTalk just fixed it. It was SD card. Too small SD card (4 GB).

@WagnersTechTalk 4 ай бұрын

@@tiua2153 oh yeah, too small. Glad you got it running!

@Tsigarinho 4 ай бұрын

So Recalbox is the old Emulatiostation? How you can add overlays or shaders or core options to run the game in 1080p and other options?

@WagnersTechTalk 4 ай бұрын

Most of the retro gaming distributions (recalbox, batocera & RetroPie) all use Emulation Station. There are several core options and you can change the resolution if needed.

@butchcooldidge 4 ай бұрын

gamecube and ps2 support?

@WagnersTechTalk 4 ай бұрын

All the supported systems can be found here: www.recalbox.com/database/

@euckb 3 ай бұрын

did you get gamecube working?

@butchcooldidge 3 ай бұрын

@@euckb No i dont try it.

@euckb 3 ай бұрын

@@butchcooldidgefair enough. i couldnt get it to work. i got playstation 1 and nintendo 64 working though. raspberry pi 5. just dont do the update. install from "pi imager" to SD card. dont do update. breaks everything.

@NuVanDibe 3 ай бұрын

wait is gigastone not a fake brand?

@WagnersTechTalk 3 ай бұрын

Nope, I've been using them for several years. Haven't had an issue with any of them.

@effortlessrob1114 Ай бұрын

Do not use Windows 10 to flash. It will not work.

@WagnersTechTalk Ай бұрын

I've used Win10 to flash as well as 11, interesting that you had an issue with Win10.

@effortlessrob1114 Ай бұрын

@@WagnersTechTalk I apologize. It was the 4 model b that i couldn't get to boot after 10 flash, so i used penguin. Were u able to get 4 b to flash and boot with 10, out of curiosity? Mine burnt up by putting it on a running dvd burner.