Recessed Lighting Install with No Attic or Prior Wiring

Рет қаралды 3,859,458

Күн бұрын

How to Install Recessed Lighting with no attic access or existing wiring! DIY Can Lights
🎥 What to Watch Next:
How to Install Vinyl Plank Flooring - • How to Install Vinyl P...
Small Bathroom Remodel - • DIY Small Bathroom Rem...
Tiling a Small Bathroom Floor - • How to Tile a Small Ba...
➤Plans from this build:
Modular Garage Cabinets bundle - fixthisbuildthat.com/garageca...
➤Tools/Supplies Used (Amazon affiliate links):
6” LED Wafer lights - amzn.to/2OnuIGB
6” Hole Saw (abrasive) - amzn.to/3bFJzoF
6” Hole Saw (toothed) - amzn.to/30E2hqt
Hole Saw Dust Bowl - amzn.to/3rH3I3l
Non-contact voltage tester - amzn.to/3rJu9VS
Wire Strippers - amzn.to/2OharCI
Wire Fishing Tape - amzn.to/3t9TbxQ
54” Flex Bit - amzn.to/3rGjKKK
16” Self-feeding spade bits - amzn.to/38wcyJD
Husky Screwdrivers - homedepot.sjv.io/Gjj0Gr
➤FOLLOW ME on Social Media:
Instagram - / fixthisbuildthat
Facebook - www. ibuildthat
Twitter - / fixthisbuildtht
Pinterest - / fixthisbuildtht
➤Referenced people/videos:
Jeff at DIY Home Renovision - How to Install Pot Lights: • How To Install Pot Lig...
➤Support the FTBT Channel:
Buy FTBT Woodworking Plans: fixthisbuildthat.com/plans
Buy FTBT Merch: fixthisbuildthat.com/merch
Links to My Tools & Gear: bit.ly/FTBT-tools
Subscribe: bit.ly/FTBT-youtube
➤Thank you to these partners for supporting my channel. Go check them out!
Kreg Tool: amzn.to/2FXZIGp
ISOtunes: bit.ly/2Ru4Es8 (10% off code: FTBT)
TimberlandPRO: bit.ly/2Zm1r1n
➤Join the Builders Club!!! bit.ly/2abkaSV
More content, early access, FREE plans, video credits
Installing LED recessed lighting is not hard with the right tools. Can light installation is a thing of the past with these new wafer LEDs and you can install them without attic access or existing wiring. Make your space way better
Music Licensed through Epidemic Sound - bit.ly/3qCwWiW

Пікірлер: 1 200

@Fixthisbuildthat 3 жыл бұрын

To start comparing quotes and simplify insurance-buying check out Policygenius: policygenius.com/fixthisbuildthat Thanks to Policygenius for sponsoring this video!

@hamzagarmaje7898 3 жыл бұрын

I want to work in the electricity business

@hamzagarmaje7898 3 жыл бұрын

@@kaykay037 Could you please help me?

@nancyrao3511 2 жыл бұрын

Dear, how can i contact with you, do you have wechat? You can add me😘

@archerkayson7892 2 жыл бұрын

Sorry to be off topic but does anyone know a method to log back into an Instagram account?? I was dumb lost the password. I appreciate any assistance you can offer me

@brysonpatrick9209 2 жыл бұрын

@Archer Kayson Instablaster :)

@user-neo71665 2 жыл бұрын

A hint from an electrican, don't tuck the lights up in the ceiling until you have the switch installed and you can make sure they work. Some designs of these led are not real easy to get back out once installed and can damage the sheetrock.

@gigglesaregood Жыл бұрын

I just learned this the hard way...........oops.

@weeeeehhhhh Жыл бұрын

Do you have regulations for fire rated recessed ceiling lights?

@user-neo71665 Жыл бұрын

@@weeeeehhhhh All depends on the local area and the type of building. Sparkys go by the national electric code (NEC) that is part of the national fire protection association (NFPA). At the end of the day the local code enforcement has to adopt it and enforce it. A "good" electrician will at least do the minimum the NEC calls for. There are some areas that some of us might think are not enough so we will do more.

@jemmabarls Жыл бұрын

@@user-neo71665 Do you have a tip for getting them out though? Our electricians installed them but one of the lights is set to the wrong temperature and it's driving me nuts. But alas, not easy to get out and I just finished repairing/painting the ceiling before I noticed the temp issue.

@user-neo71665 Жыл бұрын

@@jemmabarls it all depends on the mounting style. Without seeing it or even knowing I have dealt with the style before I can't say.

@romondoalexander8851 Жыл бұрын

Third video now that has skipped the one part i actually care to see! How the wires feed into the lil boxes and how to daisy chain them off each other..

@sandymiller6467 Жыл бұрын

This is what I am also wondering. I have existing lights and want to add more

@romondoalexander8851 Жыл бұрын

@@sandymiller6467 We just did them in my kitchen. Super easy. A. Buy the right size gage wire. (Either 12 or 14) my white wire was 14(smaller of the two 1. Turn breaker power off to lights in that room 2. Go to wire. Cut it and snip some off the ends to feed wires into the lil wire connectors that come with the light (in the lil box. They are awesome and super easy) match colors. 3. Cut a new piece of wire (the length youll need to reach next light whole) fray it and go from first box to second box. 4. Repeat until done 5. Turn power back on and enjoy! I got a pen that checks current just to be sure (klein brand if i remember)

@heyyheyyhannah5217 2 ай бұрын

@@romondoalexander8851would it be easiest to connect an existing ceiling fan at the end of the circuit?

@romondoalexander8851 4 күн бұрын

@@heyyheyyhannah5217 might be. I'm not sure.

@Eggsther 3 жыл бұрын

Drlling the hole with the dust all collected on the bowl is just so ✨SATISFYING✨

@Fixthisbuildthat 3 жыл бұрын

that dust bowl is amazing!

@taylormcintyre5759 3 жыл бұрын

Forbidden pancake mix

@HomeRenoVisionDIY 3 жыл бұрын

Great job Brad. Cheers!

@Fixthisbuildthat 3 жыл бұрын

Thanks, Jeff! Definitely used your video as guidance and running the drill backwards was such an awesome tip I wanted to pass it on 💪💪

@jamesmacintyre1415 3 жыл бұрын

See Jeff wealth of info. The DIY encyclopaedia

@jonnytse 3 жыл бұрын

The Legend himself.

@Mika30041975 3 жыл бұрын

😉

@bluegenie840 3 жыл бұрын

Jeff is here guys 😅😅

@reissallan 3 жыл бұрын

Make sure your ceiling fan blades do not cross the light coming out of the LEDs or else your entire room will become a strobe light.

@ronohlsi2262 2 жыл бұрын

🎶Boots & pants🎶

@leahj6175 2 жыл бұрын

I'm actually living with that uneducated decision as we speak. smh Good advice, Allan! Hindsight is 2020

@greenidguy9292 2 жыл бұрын

Staying alive, staying alive…

@charlesking678 Жыл бұрын

Ohh man. I have this issue. It's super annoying!

@crowbaril903 Жыл бұрын

The rule of thumb is 5 feet from the edge of the blade

@TemperVoid 3 жыл бұрын

Love how you go through each and every step in your process! Even the steps that don’t go quite as planned. It’s the perfect way to help teach problem solving and working around roadblocks.

@jesusislord6545 2 жыл бұрын

Repent to Jesus Christ “Everyone who competes in the games goes into strict training. They do it to get a crown that will not last, but we do it to get a crown that will last forever.” ‭‭1 Corinthians‬ ‭9:25‬ ‭NIV‬‬

@woodworksbygrampies1284 3 жыл бұрын

Great video. Thanks for not rushing through it and explaining everything thoroughly. I especially liked the mock up to show options depending on circumstances. Continued success!

@pemtax557 2 жыл бұрын

Excellent video ... very well explained, demonstrated and produced. I'm a huge fan of LED lighting and surface mount lighting like this really revolutionizes projects like this. Thank you so much for taking the time to do such a wonderful job of sharing ... Cheers Mate!!

@trackrat62 3 жыл бұрын

The algorithm has showed me some of your videos before and I've watched a few, however this video is incredibly timely as I'm about to do this in my basement. Subscribed.

@AndrewDeLong 3 жыл бұрын

You may not be a licensed electrician, but I've taken a home wiring course or two, with one, and you could have fooled me. You clearly do your homework.

@Fixthisbuildthat 3 жыл бұрын

I know enough to be dangerous 😀

@sirseacow4462 Жыл бұрын

That's the cleanest attic I've ever seen lol

@zpan5972 2 жыл бұрын

Pro tip: when drilling the holes on the ceiling, put the drill in reverse first. Cut about 1/3 into ceiling, then switch back and finish the job. This way you would have a much smoother cut, and avoid banging your head with that drill！

@Grumpyskater 2 жыл бұрын

Thanks for that!!

@leokendall 2 жыл бұрын

@@Grumpyskater or if you chuck has a torque setting try turning it down so if it do hook, it don't knock your teeth out.

@nicoletumminello9004 3 жыл бұрын

The way the lights sucked up perfectly was awesome.

@betaorionis78 2 жыл бұрын

This video is awesome! I have the same scenario but put off installing recessed lighting because thinking there’s so much more into it. But this video with the wafer lighting is a perfect solution👍🏽 Thanks so much now I know what to do.

@how2q Жыл бұрын

Wow...know this took a while to put together...thank you! Great information. Just wanted to confirm some ideas i had of how this would go. Making the mock up and going through how you would do it if you didn't have easy access was great - again thank you for painstakingly going through it all!

@Digidoc316 2 жыл бұрын

These wafer lights are SO easy! Since they are IC rated and rated for damp locations, I installed four of them in my front soffits as wash lights and put one in my bathroom above the shower! As an added bonus, I used one in my closets to satisfy the electrical inspector; they don't protrude into the space so there is no concern with the lights getting broken and starting a fire. Also, the LED uses so little power, I actually see the difference in my bill!

@emilolguin3087 3 жыл бұрын

Great mockup of the wall. Note that if you're working on an older home - the walls might have horizontal blocking at 48"~52" from the floor preventing you from passing the wire to the new electrical box, as many electrical boxes are set at 45"~48" on center. This would require you to cut another access hole above the block and drill a hole for the wire to pass through. Last summer (covid project) I remodeled our bathroom and used the wafer lights above the toilet and shower areas. They're fantastic as they give plenty of light and are so easy to install. The best quality of light for a bathroom is from the 4000K fixtures. I also used clear silicone to seal the light. Oh yeah, I left my wire strippers up in the attic too! One more thing, if you're going to put a ceiling fan up you have to be careful not to place too many or too close to the fan because you'll get a strobe effect (been there, done that)!. And you may find that the light from the ceiling fan is disappointing compared to the wafer lights.

@progression_decibel 2 жыл бұрын

What Kelvin (K) is recommended for other areas like a) kitchens b) living room and bedrooms and c) hallways? Aside from a specific use like watching a movie or something, I strongly dislike 2700K as an always-on temperature - it feels too dim and 70's looking to me.

@Emily-lk1mf 2 жыл бұрын

@@progression_decibel 3k is pretty typical, 4k is good for bathrooms as its a much whiter light. We never install 2700k unless ppl ask for it, its way too dim

@natefoster Жыл бұрын

It’s personal preference as well, we have 2700 throughout our house and love it, feels cozier to us.

@tighecrovetti2844 3 жыл бұрын

Those wafer lights are one of the greatest modern inventions. No cans, low heat, low draw, great looking......all around win. I installed, I think, a total of a dozen of them in my finished basement.

@robertmarts6810 2 жыл бұрын

We've been installing them for 6 years now. If a client wants the traditional cans, they have to request them.

@dragonlordship Жыл бұрын

Best part of this video is that dust bowl. Watched many channels but none had that even the big channels and experienced one around 30 years :) .. excellent choice

@stefanbuscaylet 2 жыл бұрын

Figures i saw this video 2 DAYS AFTER HIRING AN ELECTRICIAN TO DO EXACTLY THIS. We just wanted a can light over the kitchen sink where there was already 6 can lights in the kitchen already. I watched him and he did pretty much what you did. Great video and thank you. Little things you added were more valuable than you probably recognize like using the non-contact voltage tester as well as why you were using gloves. Just remember that many of us watching these videos have ways lower DYI skills and its probably hard to even recognize how far down the learning curve we actually hard. Again, great job on this video and thanks for taking all the extra time while you just wanted to get some lighting in your house to video record, edit, and post videos for us all.

@jasoncoleman2940 3 жыл бұрын

Awesome video, Brad! I appreciate you mixing it up with some of these home improvement DIY videos. And great tip on "never drill blind" because did just that last Fall and nearly drill right into a live 20amp cable feeding an outlet on another wall. My advice when feeding down to a existing box (switch or outlet): just pull out the new work box nailed to the stud & replace it with an old work box. They're easy to cut out with an oscillating multi tool & saves you one drywall patch job!

@88lundful 2 жыл бұрын

20 amp outlet XD damn

@trebbleshooter Жыл бұрын

Just curious how you fished the wire to the next lights.

@sapelesteve 3 жыл бұрын

Great work Brad & glad that I watched this video because now I know why I always call an electrician! 👍👍😉😉

@Fixthisbuildthat 3 жыл бұрын

hahaha, no doubt, Steve!

@jasonmorgan8825 3 жыл бұрын

As an electrician for 30 years, you did a very good job with the video and explanation. Only suggestion would be using 14-3 from light to light etc. You then could of carried both the hot and the switchleg to the existing outlet and convert the switched outlet to unswitched.

@Bapuji42 2 жыл бұрын

I thought he was keeping the 14-3 to the outlet and just splicing in 14-2 to run to the other lights.

@marist89 2 жыл бұрын

yes. I would have cut the 14/3 about half way between the first light and second light. Then I would have used 14-3 between the two lights on that side and taken the other half of the run to the outlet and just abandon the red and replace the outlet with a non-broken outlet. Then I would have just run 14/2 to the other two lights. If the boxes for the wafer lights didn't have enough space for all the connections, I would have put a regular jbox up there. And I would have connected it with wire nuts, not those push-in connectors.

@godofwar4271 2 жыл бұрын

14-3 🤦‍♂️🤣🤣

@Bapuji42 2 жыл бұрын

@@godofwar4271 ?

@cjj-er5ip 2 жыл бұрын

@@marist89 Yep that is the thing to do. Kind of fixed one problem and created a new one. Would of put a pancake box in for the fan why I was at it as well.

@billhandymanbill2775 3 жыл бұрын

Excellent video, especially for a non-electrician! As a helpful tip, always check the LED units to make sure they are dimmable if you plan to use a light dimmer and make sure the dimmer is compatible to use. You are lucky that the ceiling cable was NM (Non Metallic, aka Romex) and not BX, metal spiral clad electrical cable as you would not be able to accurately use you non-voltage contact tester. Keep up the great work/videos!

@bobloblaw7649 2 жыл бұрын

How do i know of the dimmer is compatible?

@billhandymanbill2775 2 жыл бұрын

@@bobloblaw7649 The Dimmer will state it is either for LED lights or for incandescent lights.

@1packatak Жыл бұрын

@@bobloblaw7649 the company that makes the dimmer switch will have a list of compatible bulbs. Either in the instructions or on their website.

@andrewmckinlay2964 Жыл бұрын

Will the voltage tester beep if it encounters metal spiral clad cable?

@billhandymanbill2775 Жыл бұрын

@@andrewmckinlay2964 no, on the metal cable itself but yes at the electrical box where the individual wire conductors are exposed outside the metal spiral cable. In other words, the metal spiral cable shields the individual wires from being detected whereas the plastic jacket around the wire in “Romex” wire allows the wires to be detected by the non-voltage detector anywhere along the live cable.

@brendanellerholz7434 Жыл бұрын

Hilarious how you mention not forgetting anything in the ceiling! Once I was installing lights just like these and when I was finished I went to take a picture for the client and remembered I was using my phones flashlight while pig tailing some wiring in the ceiling and left it up there! Thank goodness these are super simple and even easy to disassemble!

@KimberlySmith14 Жыл бұрын

the detail and effort put into this video is amazing.

@SpencleyDesignCo 3 жыл бұрын

Nice work, Brad! Keep up the killer videos!

@Fixthisbuildthat 3 жыл бұрын

thanks, dude!

@philshock3805 3 жыл бұрын

Same brand I bought and installed about 8 months ago, Brad. I used them for my exterior soffits and porches though, not indoors ... 5 - 6 inch lights and 6 - 4 inchers to replace existing can lights. They are awesome! Many reasons for the swap but a big motivator for me was to eliminate places for wasps and mud daubers to take up residence which were a constant battle - the solid flush mount works great for that. In addition, not only do they look great and provide great lighting, they save you money too! They've all had a lot of use but the 4 inch lights have been run over 8+ hours every night since install and not a hint of trouble. Great choice!

@Fixthisbuildthat 3 жыл бұрын

good to hear! Hoping this will last the life of my house (our at least the life I'm here)

@jesusislord6545 2 жыл бұрын

@chrinamint 2 жыл бұрын

@@jesusislord6545 WTF?

@MEG020 Жыл бұрын

@@jesusislord6545 can you please don’t bring Bible quote into something that has nothing to do with salvation, what you are doing is making people stay away from believing who Jesus really is. There is a time and place for it, Religion is pushing away people from the truth of the work of the cross, the love that forgives all sins and from salvation for a new life in Jesus Christ. FYI I am a believer and follower of Jesus. Be blessed!

@heatharmstrong5279 10 ай бұрын

@@jesusislord6545get lost

@chrirule 3 жыл бұрын

I put those exact lights in my kitchen remodel! I love them!! I put 10 in the kitchen and its definitely not too many.

@kdm0425 2 жыл бұрын

This explained my red wiring around the house better than anything I found. Thank you!

@andrewbrown8148 3 жыл бұрын

Great upgrade, Brad~! That's a great alternative to installing the old conventional can lights. Especially when you have a 2-story house. Thanks for the video~!

@Fixthisbuildthat 3 жыл бұрын

yes, perfect situation to use them in!

@IrrationalBstrd Жыл бұрын

Most 2 story houses are not constructed like this, and he didn't show that. Most of the time in a 2 story house, you would not be able to do this so easily on the 1st floor ceiling, because you have joists that you'd have to drill through to get wire between the lights (there's a room above that, and the floor of that room is on the top of the joists. The ceiling of the first floor is directly in the bottom of those same joists and they are solid). That means you would have to cut holes in the ceiling on each side of every joist so that you can drill each them and be able to pass the wire through to the next light in st least one direction coming from the first light that is powered from the switch. You'd have a ton of holes to patch and paint in the ceiling (and possibly re-texture and blend in, if there's a ceiling texture). Plus the two holes you cut, that he showed, to get the wire from the switch through the top plate of the wall to get into the joist space).

@WideAwakeHuman 2 жыл бұрын

Having done electrical work on existing homes... It would be AWESOME if it was a standard to make a schematic for the entire home that stays with the panel for all the future owners

@Fixthisbuildthat 2 жыл бұрын

that would be heavenly!

@_Yourlocalelectrician_ 2 жыл бұрын

People already don't want to pay electricians. Imagine the extra cost labeling every little wire into a diagram. And where it's running throughout the house. Builders would never hire someone like that. Builders use the cheapest guy for profits

@johnhorning2506 2 жыл бұрын

I’ve been making one for my house because nothing matched the panel!

@WideAwakeHuman 2 жыл бұрын

@@johnhorning2506 ikr... I've never seen one that was actually accurate

@tammykonarski6528 16 күн бұрын

@@johnhorning2506Same. All labeled incorrectly.

@KodiakWoodcraft 3 жыл бұрын

Thanks for the awesome instructional! The mock-up on the bench made it way easier to follow along.

@juancarlosorozco2005 Ай бұрын

Same reaction I had after installing downlights in various places in my house. So satisfying!!!

@jefflebowski918 2 жыл бұрын

Blown insulation in the attic sucks when installing recessed lights, you have to make sure it's cleared away before you start cutting holes in the ceiling. Another tip is to buy 6" lights instead of 4", they give better coverage and the larger hole allows you to use both hands.

@iankyranakis9038 3 жыл бұрын

Wafer lights are a game changer! Another solid video, FTBT! Now that the lights are on the red, install a new receptacle with the tab intact on the black and you will have 2 hot outlets on the wall. Cap the red.

@Fixthisbuildthat 3 жыл бұрын

Thanks! Definitely changing out that outlet soon

@franklinhadick2866 2 жыл бұрын

VERY nice, I'm looking at replacing my old (1980's) Can cieling lights and this just makes my job easier, thanks.

@BearcatJohn82 Жыл бұрын

Just bought a house, and really wanna update the lighting inside. This will prove useful.

@macsmith2092 3 жыл бұрын

I am putting recessed lights in my kitchen. I hadn't seen the wafer lights before. I had never seen the dust collecting bowl either. Thanks for sharing. Very timely for me.

@Fixthisbuildthat 3 жыл бұрын

Glad it was helpful!

@michaelbingham-hawk1906 3 жыл бұрын

I replaced all of the existing pots lights with these and I have installed several where none existed. I love these lights.

@SSChambers1 3 жыл бұрын

Dude, wafer lights are absolutely amazing. I installed a drop ceiling in our laundry room and wanted recessed lighting over cheesy looking fluorescent. Because of how high I needed to make the ceiling, it was super close to the joists and was impossible to install true cans. Picked up some 3/8" thick 6" wafers and love them. They even have an in-line switch to change the light color (K) to change from cooler or warmer.

@heyitsbroski 3 жыл бұрын

OMG! I've been looking for a video like this for a long time! My 2-story doesn't have much room between the floors, so I have the same layout.

@CasperJonesRift 3 жыл бұрын

Just bought my first house glad I found your Channel. Thanks

@jcsmith725 Жыл бұрын

Didn't show the one thing I was looking for. Somewhere you are you are turning one power line to 4. I need a cleaner way of doing that.

@josephspina7827 3 жыл бұрын

Many ways to do this, but as an experienced electrician in your situation i would have turn off the power to the wire reached into the ceiling light hole closest to the outlet cut the wire with enough access to make a splice (outside the ceiling) in an approved box , pull the rest of the wire out of the first hole (near the switch) to make another splice in a sec box. And replace the wire between the two ceiling light holes.

@Bapuji42 2 жыл бұрын

I'm not sure I understand. Where would the boxes go?

@wholeque Жыл бұрын

This was one of the most informative videos I’ve ever seen, thank you! 😅

@exodusoh 3 жыл бұрын

Doing this this weekend with my buddy (he’s a union electrician so it should speed things up), thanks for the video and the links!

@Crt5 Жыл бұрын

I just watched this whole video and I live in a rental… maybe one day I can install pot lights on a house of my own

@roberthirsch1146 3 жыл бұрын

Great tip to run in reverse. Wish I would have know it before I did my ceiling.

@davidluu6288 3 ай бұрын

Guy , your video is very useful and helpful,thank you !

@carllamb6711 2 жыл бұрын

Hi Brad Great job mate I'm just trying to catch up on some of your older videos as you know iv not been following you that long and id love to try and watch as much as I can. Thanks mate 👍👍👍👍

@Fixthisbuildthat 2 жыл бұрын

enjoy!

@MartyOfAllTrades 3 жыл бұрын

Looks great Brad, I just completed this in my kitchen and living room and they are awesome lights.

@psychorabbitt 3 жыл бұрын

1:19 Star Trek fans yelling at the screen, "THERE. ARE. FOUR. LIGHTS!"

@jimmac1185 3 жыл бұрын

"What lights?"

@richdbolduc 2 жыл бұрын

i just installed a couple dozen of these exact lights and they're great.

@loricraig3306 3 жыл бұрын

I just purchased for a rental remodel, they look incredibly easy. As a short, 60yr lady with MS, I need easy with anything on a ladder, over my head.🤞🏻

@DavidMoncrief 2 жыл бұрын

If you need to fish a wire to the light switch you can always just remove the new work box and put in an old work box. I have now placed over 70 of these wafer lights in my home on the first floor and basement, they are a game changer.

@88KeysIdaho 2 жыл бұрын

I'm really good at putting in old work boxes with "battle ships" (the thin F-shaped straps you put on the outside of the box to apply counter pressure to keep the box in place.). 70 is a LOT of lights!!

@DellAnderson 2 жыл бұрын

Great video editing pace and I had to take a double take on your split screen showing your 'twin' helping! One thing to keep in mind is that the code requires 1/16" steel backing plates (I think that is the term) to protect wires running closer than 1 1/4" to the surface of the 2x4 so it might be better to move the cable before drilling rather than drill near one side or the other of the 2x4 framing. Those plates would be nearly impossible to install as old work.

@vzdsvszdvzsdvzdv7963 2 жыл бұрын

nice work brother! cant wait for the fan!

@ericradford8120 3 жыл бұрын

I've been scouring the bowels of KZfaq for while now, looking for this exact thing! Thanks for putting it together! I am wanting to do the same thing in my kitchen but haven't found a "proof of concept" of installing can lights without some kind of access or dotting my ceiling with holes and repairs. Hopefully I can get as lucky with joists. Wanna come up to Clarksville and help out! Haha....only partly kidding! Lol. Great job brother.

@timothymbess 3 жыл бұрын

3:55 - you almost got knocked into DeWall by your drill.

@carterdarrington4014 3 жыл бұрын

We all needed this thanks so much

@Fixthisbuildthat 3 жыл бұрын

you're welcome!

@johnwilliams242 3 жыл бұрын

Brad on the cover of Woodcraft magazine!!!!! OH SNAP!!!! congrats brother, hard work pays off....

@dfrank2044 2 жыл бұрын

Great advice I’m following your room measurements to install my lights. Many thanks.

@djdnl 3 жыл бұрын

Looks great! Just a tip, if you want it brighter dont think in more spots persee. Now you are spreading the light 180degrees and basically loosing a lot on the housing and diffuser. Try to use a led spot with a lens of 60 degrees by example. Or use 30 degrees and place them closer to your walls. Than you make an indirect light from your walls and you eliminate shadows. The flat leds are very popular but they have a very low cri. So while they are blinding you, you think they light up the place but they don’t.

@Niccodemure Жыл бұрын

Agreed. Wafers are really only useful for closets. A proper can with a good reflector is much more enjoyable. That glare would drive me nuts, especially for eyeglass wearers.

@BiggMo 3 жыл бұрын

If you have a difficult wall or ceiling texture to repair match, You could also take down the crown and make access holes that the crown would cover when reinstalled. ... or if your room doesn’t have crown, it’s a nice opportunity to add it in lieu of a possible bad patch. Also consider rope light in a dropped crown as part of the lighting scheme.

@Fixthisbuildthat 3 жыл бұрын

Yeah, that's a great tip. Since my ceiling was smooth I felt like removing the crown would be a bigger pain (remove, reinstall, caulk, paint) so I would have gone below it

@BiggMo 3 жыл бұрын

@@Fixthisbuildthat ...I realize I said ‘you’ and ‘your’ but It was really a tip to your other viewers that may have an older home with other challenges.

@williamweckel8140 2 жыл бұрын

I've HAD to do this many times. It's much faster than repairing drywall.

@jeromegarcia5396 11 ай бұрын

I don't believe mudding and patching is that hard, plus you can sand it and try, try again 🤭

@caveman775 3 ай бұрын

Insane video! Loved the mock up. You went above and beyond to explain that situation

@dipbleu 6 ай бұрын

Wow...Awesome job! I am about to install a junction box for the new light the room, but I think your option is much better. Thank you for posting it.

@arar983 2 жыл бұрын

This really helped in an unexpected way. I have a couple rooms with those pesky switched outlets and wanted to disable that functionality, since the rooms already have overhead lights. Great to know that is possible simply by replacing the outlet with the tab intact! Thanks!

@williamweckel8140 2 жыл бұрын

Although outlets are inexpensive, you could have just added a jumper wire. I don't know your specific situation so I can't give more details as there are several ways that the outlet circuit can be wired. I don't mean the outlet being wired, I mean the box that the outlet in question is attached to.

@randomdude3066 3 жыл бұрын

I highly recommend investing in a $20 endoscope that is a quarter inch size. Then you can drill 1/4-in holes and insert the endoscope which can connect to your smartphone.

@randomdude3066 3 жыл бұрын

You can get one that's waterproof too and so you can use it pretty much anywhere.

@Fixthisbuildthat 3 жыл бұрын

Dang, that sounds awesome! I'll have to check it out. Didn't know they made ones that cheap

@randomdude3066 3 жыл бұрын

The ip67 water proof ones are a little more. The one I have was 35.

@JustinRoffMarsh 3 жыл бұрын

I have one that sends the signal via WiFi to an app on my phone. I think it was about $40. Works well.

@biggestsin54 5 ай бұрын

Great video. This is exactly what I need.

@adrianabshire 3 жыл бұрын

I have these all over my home! We have trusses rather than 2x12 rafters so the best part is that when you want to add any type of wiring I just pop out the LED pots and can run the new wire without tearing out ceiling! Just toss the new wire from hole to hole! BTW, I have a lot of 8” wafers in my garage but used 6 inch in my kitchen and notice that the 8” will blink when the Lutron switch is turned on but the 6-inch does not... we used these in our church and the 8-inch do the same thing...

@electricalron 3 жыл бұрын

Licensed electrician here with 31-years of experience... homes are still wired without ceiling lights because they're not required by the code. The only (2) rooms in a house that requires a ceiling light (or wall sconce) are the bathroom(s) and kitchen. Brad offers a GREAT EXPLANATION of the 3-wire and the switched side vs the constant side of the receptacle. The split receptacle is required by the code because receptacles are required within 6' of any opening (such as a doorway) and no more than 12' apart along the wall line. If you are unsure even a little bit, dont hesitate to hire a licensed electrician. These lights with install are anywhere from $150-$225 each LED light.

@bradenwelch1967 3 жыл бұрын

He definitely could've still used that receptical if he junctioned his wires right. Electrician also💁‍♂️

@stevenmorris2293 3 жыл бұрын

Could you not have just added a new switch for the recessed lights and powered it off the existing outlet switch, and just left the outlet switch as is ?

@diydaveman 3 жыл бұрын

@@stevenmorris2293 I'm thinking, yes, and this is what I would have done.

@headshq 3 жыл бұрын

All he did need to do is cut the 14/3 and put both ends in the first recess junction box. If the black wire is constant her splice both of the on the 14/3 send constant power to the outlet and the red wire coming from the switch becomes the switch leg for the lights. From there he daisy chain to feed the rest of the lights. So first light you gonna have 3 romex going in the junction box. Electrician here

@raymondcochran3201 2 жыл бұрын

That's kinda pricey considering the actual wafer light these days is around 20 bucks

@bobbyhorowitz9089 Жыл бұрын

I recommend put the drill in high speed. There’s less torque, less kick back. Never use an insulated screwdriver. Just drill the centre hole, then poke up a coat hanger that’s cut, bend a right angle in it that’s the radius of the light fitting and spin it. This will mean you’ll have clearance from the roof timber. DIY electrical scares me, as seen some seriously unsafe stuff.

@powerjoel Жыл бұрын

Facts

@MCsCreations 3 жыл бұрын

Fantastic work, Brad! Looks much better now! 😃 Stay safe there with your family! 🖖😊

@Fixthisbuildthat 3 жыл бұрын

thanks, dude!

@clobbyhardy 3 жыл бұрын

I installed 24 of these lights on our house when we remodeled. I love them, and they definitely have a nice wow factor. Definitely get a good quality dimmer, they have a really nice range.

@barsa901 3 жыл бұрын

What dimmer did you use?

@clobbyhardy 3 жыл бұрын

@@barsa901 this is the exact name on Amazon from my order, but they come in 2-packs, just giving you what I got. Lutron DVWCL-153PH-2-WH Diva 150-Watt Single Pole/3-Way LED/CFL Dimmer with Wallplate (2 Pack), White

@ArpadBuildsThis 3 жыл бұрын

I’ve needed to do this for a while now! Will there be a video on the ceiling fan installation? Thanks!

@Fixthisbuildthat 3 жыл бұрын

These lights are so easy to work with!

@michaeldouglasmason 3 жыл бұрын

A quick fix to re-power the receptacle is to pull the slack end of the 14/3 to the pot light closest where the plug is. Run an additional wire between that pot and the first light brought the 14/3 to. You then can continue the constant power to the plug. Would be even better if you use 14/3 between those two lights. Much easier for box fill.

@frankgiardina4877 2 жыл бұрын

You are the first one to correctly explain how this should have been done.

@michaeldouglasmason 2 жыл бұрын

@@frankgiardina4877 normally I just yell at my phone instead of commenting...

@user-hm5zb1qn6g 2 жыл бұрын

My GF's cup size. Kidding....great video...subscribed.

@budrobinson1862 3 жыл бұрын

I sent my helper to the supply house for wire nuts and he brought back the push connectors! Sent him home for the day! Not to mention we were running 14awg and he brought back 12awg connectors

@AdamKirbyMusic 3 жыл бұрын

That dust bowl was really cool, as someone who's gotten a face full of drywall dust just drilling regular holes in the ceiling I can't imagine how bad that would have been. 😬

@SafetyThirdProps 3 жыл бұрын

Really nice job, Brad! I'm kind of in love with these lights now and I'm going to have to get some for my home!

@beatdownjar 3 жыл бұрын

Super helpful video! Lookin forward to doing this to our house now.

@rockybass9764 2 жыл бұрын

Nice video, thanks. The LED flat lights are nice and save a lot issues you noted with the old style cans. Not sure if I want to try this or not, it’s still a lot of work. Plus all the drywall patch and paint.

@joshtypesn 3 жыл бұрын

You can still power the outlet off of that same wire. Just tap I to the existing wire as intended but leave the black alone and splice into your ground, neutral, and red(switched) hot wire, swap the outlet as mentioned with a new outlet.

@Fixthisbuildthat 3 жыл бұрын

unfortunately I had to move the wire too far to hit the hole for the light. And you can't add a junction box covered in a ceiling. If the pig tails for the lights were longer that would have worked

@gilbes1139 3 жыл бұрын

@@Fixthisbuildthat hopefully they didn't staple the outlet wire. If it is not stapled, it could be used as a pull string to pull a new slightly longer 14/2 that you can join at the light instead of going all the way back to the switch box.

@scottsimpey2965 2 жыл бұрын

Thanks for sharing this Brad. This is a something that I’ve been wanting to do for a few of the rooms in my house that just have lamps that are on switch run outlets. I have done a far amount of electrical work in the past so I’m competent enough to do that but I just haven’t been sure about how to deal with the outlets and also how to run the lines for the lights where there isn’t any existing ones there that I’m aware of. Lots of great information, thanks again Brad.

@coreyrogers583 2 жыл бұрын

Sounds like you’ve done hardly any electrical work

@mikesgarage5066 3 жыл бұрын

These lights are cool. Installed them in a living room a few years ago and also in the soffit over my garage doors and they give a ton of light. Looks nice and added safety also.

@marcmarcmarc681 3 жыл бұрын

Does the the wafer LED lights can become burnt out light or do it need some resinstalling the lights after a couple of years?

@mikesgarage5066 3 жыл бұрын

@@marcmarcmarc681 They are LED so should last 30000+ hours depending on the light. I don't know if just the wafer portion can be replaced or if the whole thing needs replaced but it would be quite awhile before needing to be replaced.

@marcmarcmarc681 3 жыл бұрын

Thank you so much brother

@hhholmes714 Жыл бұрын

Wow! Not even 2min in and I am SO impressed by all the info!

@jonathandevries2828 3 жыл бұрын

Cool i like how you can barely see them when they are off!

@Fixthisbuildthat 3 жыл бұрын

great looking product

@Anthonyarv 3 жыл бұрын

Pretty confused on the wiring part. How to do you wire power to first light and then to the next?

@kufukato556 3 жыл бұрын

you wire from the switch to the location of the first light, then you make a 3 wire splice with one wire coming from switch, one wire going to first light, then last wire going to second light, rinse and repeat

@jamesmacintyre1415 3 жыл бұрын

Well done Brad. I was going to suggest watching Jeff install them on last week's live but out of respect for your channel. Didn't feel was right place to suggest it. Between you and him I've learned alot over the last year. And will be replacing my can lights with these. As part of my basement restore after flood last summer

@Fixthisbuildthat 3 жыл бұрын

Jeff is awesome, such a wealth of knowledge. I'm just cobbling it together as I go with help from guys like him :)

@roneckler9937 Жыл бұрын

Here is some helpful advice. If the switch that controlled your outlet was on the opposite wall, and you had two lights cut into the ceiling between the switch and outlet, you could have run a piece of 14-3 between those two lights to connect your outlet again. the black would have stayed constant hot, and the red could be used as the switch-leg for the lights. this way you can have the outlet working again without cutting more holes in the drywall to run a new wire. Fiberglass fish sticks work a lot better at fishing through this type of ceiling too. Great job on the explanation though.

@superscort57 3 жыл бұрын

Man I had the same situation installing those lights with a powered outlet. Then I left my flashlight in the ceiling lol

@Fixthisbuildthat 3 жыл бұрын

hahaha, yes! Always the last place you look

@bobwadsworth4799 3 жыл бұрын

@@Fixthisbuildthat Quick story about that. My father-in-law took down a fireplace mantle and inside he found a pin nailer that somehow the person who built the original mantle left inside it.

@SSChambers1 3 жыл бұрын

I found a '70's pry bar deep within my crawl space attic with some ancient Old Milwaukee beer cans. Guess back in the day drinking on the job was acceptable lol.

@superscort57 3 жыл бұрын

@@SSChambers1 brilliant idea could be electrifying

@613HalfwitGarage 2 жыл бұрын

If you wanted to keep constant power on the other half of that plug, joint that 3 wire in the box and run the switch leg to your pot lights and tie the blacks together so they run through to the plug, then replace your plug with one that isn’t split. Then you have your plug with constant power and your switched pot lights. This will only work however if you have enough slack

@zamboniman87 Жыл бұрын

Exactly. I don't understand why the load side was discontinued. He could have just tapped in for the new lights and left the black to continue.

@amartinone 2 жыл бұрын

Awesome! I have a room in our house I'm wanting to do this in. Great video!

@franklinrAudi 3 жыл бұрын

You just gave me a project, thank you very much, the key to my issue was the fish tape, didn't know of a way on how to move the wires.

@axiomhi8549 2 жыл бұрын

Great video, and well explained. My only criticism would be that you really didn't need to run a brand new wire to the outlet formerly controlled by the switch. The bottom of the outlet is fed by a different wire - not the one from the switch, therefore, all you needed to do was cap the red wire and tuck it in the back of the box, replace the duplex outlet with a new one with an unbroken bridge, and the wire that supplied the constant electricity would have powered both top and bottom.

@patricksaludo2236 2 жыл бұрын

totally agree. He messed up with cutting the wire at the attic and killed an outlet,plus leaving a wire hanging in the attic that could potentially be a fire hazard if someone puts power into it in the future. He coulve just got power for his lights from the outlet by putting new wires.

@guyzer6197 2 жыл бұрын

So how was he going to switch the lights on and off? He needed the red wire in the 14/3 that was coming from the switch and going to the receptacle.

@castroy1 2 жыл бұрын

@@guyzer6197 Why not add a box in the attic and branch off the red for hot for the new lights. Keep black as it is and get a new outlet that is bridged.

@guyzer6197 2 жыл бұрын

@@castroy1 you could, but there is no attic access.

@aurvaroy6670 2 жыл бұрын

@@guyzer6197 He can run a 14/2 from the switch box or switched outlet to the nearest light and tie the black from the new wire to the red in the box.

@Lando1020 Жыл бұрын

Set drill to driver mode and use the torque settings so it doesn't stick and cause the entire drill to spin and potentially hurt you. Works great for drywall since it is very easy to cut.

@jarrelljulien5673 3 жыл бұрын

I had the same situation in my previous house with joists and not trusses. I did mine a little different though. I only used one light to avoid having to use a flex auger and get myself in trouble drilling blind. I connected my light to constant power off a nearby light switch. Only had to make two small holes right next to the top plate to bring the wire up, one in the wall and one in the ceiling and went around the top plate, then hid the wire using the crown moulding I had to take down to get there. Next added a wireless light switch kit I found online. It had a relay that used 120V and a rocker switch that replaced any light switch but didn’t need power. It was kinetic and got power whenever the switch was flipped.