Looks great, I know that feeling about neighbors calling the city on you.

I remember these builds you are showing. I have a Ranger that I want to do a SPOA on. You have come so far!!

If anyone thinks about spray foaming their shop, install house wrap before steel goes on so that it can be replaced when needed

I looked at having my shop spray foamed, but could not justify the costs. I stayed expanda foam from cans to make it air tight, then rolled R19 fiberglass in my 2x6 16" on center studding. Then I blew 24" of fiberglass in the attic on top of 4mil plastic as a vapor/corrosin barrier. I then covered all the walls with 4 mil clear plastic using cap nails as staples don't seem to hold well. I can wash vehicles without ever getting the insulation wet, and is added to the air tight construction. I love the ability to keep my shop cold or warm. I did more labor, but saved $3K plus and got a better R value. Nice shop.

Genial la entrada al taller de los perritos 🐕🐕🤩👍

Love the work area under the loft

Good to see the channel back up and running. Keep up the great work and awesome content!

I really enjoyed the rawness of our original videos. It was super DIY but you made some cool stuff. I hope you continue on with that theme even though you have a may more legit set up. Congrats man!

I’m sure the lift is on the to do list… congrats on the new shop! Goals right here!!!

Shop looks amazing! I would like to see your dualsport adventures too!

So glad to see you back on KZfaq. You need a fresh air system for the compressor. Just a few holes and a mesh to filter the air coming in. Or you will suffer from water in the air lines.

Some real good ideas here. It’s always a work in progress.

Them Texas themed Crocs for the win dude!! 👌👌👌👌👌

This was kinda surreal. I gave up access to a decent sized shop to free up the time to build my truck in my driveway, out of my tiny garage with a borrowed welder. Luckily my neighbors have been really cool.

I like the video. I'm waiting on materials to be dropped off on our property for a 32x48x12 shop. Haven't had a tree to work under for almost 7 years now. I'll be overwhelmed as the last garage was 24x32x8. I'm excited to say the least. It's a lot of money but will make our lives much more enjoyable. Mostly mine because I work on the vehicles and our home has lacked tremendously on storage. And we can get the toys out of the weather.

Stoked for you! What a shop space to work in!

Congratulations on the awesome shop! If I can make one recommendation it’s to make sure you have multiple large fire extinguishers throughout the garage. Half ass customs channel is an example of how quickly everything can be lost.

NICE Shop there Dude...............................LOVE your Dogs, there Beautiful !

Chris your new shop is awesome. Come a long way from the driveway in Albuquerque. Keep on wrenching and STAY RECKLESS

That garage project came out amazing! I ride KTMs also! I think you'd appreciate 2 mini splits in that space, especially to battle the Texas heat! I'm guessing two 3 ton units would do it!

Good Job bro, way to live the dream.

I'm envious. That's a beautiful shop.

Been a fan since the beginning. Cool to see how far you’ve come since wrenching in the driveway… congrats man 👍👌

Looks awesome!!

Good job young man!

Oh man I love your shop. Hopefully one day I will build one. 👍💪

You had me when I saw you added the dog door! :)

I was curious about the loft height and the height above it. This is exactly what I want. I don't have the space you do. Mine is 20 x 50. I wish I had an additional 10 feet of width but it was here when I bought the place. I am also in hot Texas. I will measure but think my ceiling is 18 feet. Great job. Dream shop is an understatement!

congratulations

Hell ya you put your time in you deserve it 🇺🇸🦾

Brilliant place for a compressor. I have my eyes on the same compressor at the store.

Check with Harbor Freight on your big grey jack stands. They had a recall on them because they might collapse. I took mine back and then got some real beefy ones from Summit Racing. Nice work on the shop. I will be building one soon.

Awesome man, looking forward to seeing some new videos and that ranger!

Cute with the dogs doing an inspection. Why the covered open space on the side. Would not have been that expensive to move the wall out when it was built. I am moving my compressor outside in it's own shed to cut down on noise. Now you need a two post lift.

Bad ass shop

Looks well done congratulations

Hell yea man I'm happy for you and look forward to the content!

Perfect shop, good you did that insulation now if it gets too hot you can always do a mini split near the back where your tools are. Stay reckless!

Glad to see you back at it and now with a wicked shop!!! Are you comfortable giving a cost breakdown? I understand prices vary depending on area and material supply… Stay reckless!

Awesome shed, congratulations 👍

Awsome shop. I am working out of a 2 car garage that fits 1 car in it from so many tools. I will be moving from where I am to another state where I can build huge shop.

Lone Star shop shoes too. ;)

Great shop... Looking forward to updates.

Great shop. Just came across your vid. Going to check out your other stuff. Watching from Ontario Canada

Plywood is cheap in America. Line your workshop area with it and you can hand all sorts of stuff on it

This is awesome brotha. Keep up the great work. 💪🏽

Amazing shop! Hopefully one day I have a garage that big

Cool shop!

New viewer. Awesome shop! Hard work pays our. Also new subscriber! Keep up the success.

Looks badass man!

Looks awesome!! Looking forward to new content.

Nice Shop

Awesome layout. I just got through permiting for mine and we are waiting for the materials. What a nightmare it is to put up something as simple as a garage...

beautiful shop brother. what's the height from frame to loft floor clearance?

Nice!

Looks great! I know i said it before but im in for dual sport content as well

Those doors are made on a GTX-500 probably in Kansas.

Super excited for you. Now when can I bring the LJ over to get work done. lol

Awesome shop. Congrats!

You are going to need venting in that compressor closet.

Great shop. I am just waiting to hear back from a builder connection about pricing on a shop I designed. Holding my breath, cuz it's probably going to be way high. Everyone cross your fingers with me! lol Thanks for the tour. Do you worry about the compressor overheating at all? I have thought about enclosing mine too. Cheers.

Now you need a Mr.Cool

Congrats on the new shop. Can’t wait to see what’s next👍

Nice Shop🏁New Subscriber

Dream shop build! Curious to know a bit of a cost breakdown, off course each region would vary. Cheers 🤘🇨🇦

The size and simple design is cool. What LxBxH? Do you have AC and HEAT ? Price estimate for completion ?

small laundry machine for rags would be nice

You don't have to tell me about the heat twice .I did a simple leaf spring fix on my suburban front you know how the driver side intends to lean lower on square body .took for ever to put that video up on here upload.but Added one leaf on driver side took 30 minutes outside in Arkansas and shirt was like someone dumped a bucket of water over me once done .24 minutes to be exact .but 7 minutes to pull u bolts and tie rod end just to get zero rate off. Shop looks great it's exactly what I would have done as well .

sic Danger Ranger

You need a two post lift

Nice workspace! Much respect to you for how much you were able to accomplish in the driveway. Do you know what the next project is?

Why no railing on the front of the loft?

I hope you have ventilation in that closet for your air compressor? It will not last as long

Awesome! I like the loft, and the flag..where do you keep extra parts ect? I would need a ton of shelves and loft space personally.

I enjoyed the tour and learned a lot but you never mentioned the size of the barn.

Super nice setup! What lights are you using? They look like each of them have their own three prong plug. Instead of replacing bulbs, you just replace the whole fixture?

What led lights did you use? Hyperlite? If so did you use the clear or fog reflector covers? 6 total? What watts?

How hot does your air compressor get in there? Might want to vent to outside air.

whats the total cost to have build the garage itself? I would love to know for my own project.

Why did you opt for one big door as opposed to two? Are you going to put a railing on your loft space? Or keep it open and use a crane to winch heavy things up there? Why do you have two man-doors two feet apart on the one corner of the building? Super nice shop! Came out great! Only recommendation I have is when you get a fridge get one with a window front so that you and your friends can always see what's available before you open it. Looks so much nicer plus you're not having friends constantly opening & shutting it non-stop to take a peek. ; )

I just put up my 30X50x15 shop and hope to build a mezzanine like yours. I am sorry if this was asked before but what height is the mezzanine and how did you decide on that? Thank you for your videos!

Love your content. You mentioned Texas as you described insulating your shop with spray foam; what part in Texas?

What’s the code for fire proofing the spray foam?

4 inch concrete is thick enough for a 2 post rack.

Why no lift? Or is that a plan for the future

Are you going to get vehicle hoist installed ?

Just discovered your channel, very nice shop!! I'm in the process of building one as well, I was curious as to who's lighting you used?

What kind of lights did you use in the new shop?

Hey man, what are the dimensions? I am building a 24x32x10 but thinking about increasing the wall height so I can do the loft like you have. I just would want the loft tall enough to comfortably stand. Thanks for the video!

Nice shop. Is a lift coming?

Congratulations on the new beginning I'm also looking into buying a shop like that how big is it and price I'm in tx also

What roll up door opener is that??

does your wife have a detailing channel?

You mentioned the wall height, but how about shop size dimensions.

I think Your Air Compressor Is Going To Overheat for Sure

Love the build. Are those "HyperLite" lights in the main area of your shop? Did you do anything to your floor (sealant, epoxy, etc.)? I'm just breaking ground on my 50x50 shop so your channel gave me some great ideas, especially the mezzanine. I had plans to do the exact thing and was so excited when i stumbled on your DIY video of the mezzanine. By the way, I like the bikes. I'm an avid dirt biker and adv rider. I had a 690 for years and have several KTM's in the stable right now.

About to build myself a 30x40 and this is very helpful. What are the dimensions on your mezzanine? Do you wish you’d gone bigger? Or smaller? How high off the floor are then bottom of the floor joists?

Did you insulate your roll up shop door? If so what did u use?

Did you get the "harder you work" sign from Dueling designs?

Talk about those wall fans and arms you have them on. +1 sub