Recommended Tools for Apprentice Electricians

Рет қаралды 14,121

Күн бұрын

✅ Best Hand Tools for APPRENTICE Electricians:
becoming-an-electrician.com/r...
After many years of being an electrician in Canada, I have complied a video list of electrician tools that apprentices should have.
There are many electrician tool brands, and it's hard to know what tools are good and reliable. I am very grateful that the majority of my tools for electricians have lasted me many years and were enjoyable to use.
I share why these electrician tools by Klein Tools, Greenlee, and Milwaukee Tool are awesome, and share how to organize them into your different electrical bags.
To see an in-depth list of electrician tools, please visit the website!
becoming-an-electrician.com/r...
=================================
More INFO about "Becoming-an-Electrician.com":
becoming-an-electrician.com/a...
✉ CONTACT Riley:
becoming-an-electrician.com/c...

Пікірлер: 35

@BecomingAnElectrician 2 жыл бұрын

📕 Try My FREE Book for Apprentice Electricians!: becoming-an-electrician.com/subscribe/

@ricardovarajr 2 жыл бұрын

Union worker here. From experience always cut wires as if they’re hot. Won’t blow holes through your tools. 🤣 I’ve learned from experience myself. Great video.

@BecomingAnElectrician 2 жыл бұрын

Lol good advice! Yep.. never trust any one or take someone’s word.. sometimes it’s hard if everything has been dead for the past 6 months in the building and it’s words from a trusted worker.. always test… it’s not rude.. just do it 🙂

@michaelk5094 2 жыл бұрын

In all honesty from working as a Carpenter for years, to now starting my Electrcial Apprenticeship I don’t think you’d should add bias in these videos. From my experience similar to what you said American, German and Japanese make the best hand and power tools. I’ve found brands like Knipex, Wera, Klein to be some of the best for hand tools. And when it comes to power tools I find Makita, DeWalt and Milwaukee the best. I can assure you that I never bought the most expensive drills like the Fuel, XR or LXT lines from those brands. I found the middle range was typically more then enough. I’d only go for those top of the line for drills when you do masonry or the impact top of the line for lots of screw driving. And for bags Husky are good, Milwaukee, dewalt, veto etc, they’re all good just down to personally preference and how you like to outfit your bag. A good video :) but I’d like to see a tier catagory type thing based on budget. Not everyone can afford Knipex and Milwaukee fuel.

@BecomingAnElectrician 2 жыл бұрын

I highly recommend a high-end drill with a metal chuck as an electrician. In carpentry you are not drilling into metal. As an electrical, we are drilling though metal all the time.. not just metal studs, but thick gauge panels.. listen to the wise words.. they come from years of experience in the trade 🙂 .. also, don't let others use your drill, you will get it back RED HOT from people who cover the vents when drilling..

@heabyk8453 8 сағат бұрын

If you cant afford KNIPEX get out of this business

@ninghan4587 2 жыл бұрын

Thank you share your experience

@BecomingAnElectrician 2 жыл бұрын

Thanks for viewing the video.. more to come 🙂

@lorenmoody7002 Жыл бұрын

Thanks. Very helpful!

@BecomingAnElectrician Жыл бұрын

You are welcome! Feel free to visit the website for many more apprentice electrician tips!: becoming-an-electrician.com/

@brandonrodriguezii8150 2 жыл бұрын

Thank you very much, I am an apprentice in this new electrical world for me. greetings from Argentina 🇦🇷

@BecomingAnElectrician 2 жыл бұрын

Hey you are welcome! Feel free to visit the website, as there's lots of detailed articles and videos on there for you! becoming-an-electrician.com/

@DamionJR4923 2 жыл бұрын

Southwire and Ideal make descent electrical tools also. Knipex makes excellent tools on par with Klein or better depending on the tool.

@BecomingAnElectrician 2 жыл бұрын

Yeah there's many great brands out there.. as I explain in this other video, it's all about grabbing the brands that specialize in that certain product for the best experience.. kzfaq.info/get/bejne/a6eqjJeel62xdWQ.html

@heabyk8453 8 сағат бұрын

Iv been an elektician for 30 years. I use 5 flat nr1&2 pz nr 1&2 pH and aT20 every day. I need a sidecutter, nedelnose , stripper/wirezizzor. Cresentwrench,chanelloch, hexkeyset and volttester Brands!!! KNIPEX BACHO FLUKE

@BecomingAnElectrician 3 сағат бұрын

Thanks for sharing! becoming-an-electrician.com/recommended-tools-for-apprentice-electricians/

@fabianodamasiodonasc 2 жыл бұрын

Very good. 👏🏻👏🏻👏🏻👏🏻

@BecomingAnElectrician 2 жыл бұрын

Hey thanks so much 🙂

@unfoldingcactus33 Жыл бұрын

Gotta fix that audio. Otherwise, great video

@BecomingAnElectrician Жыл бұрын

Ya, think I recorded too quiet in this one, so it had a subtle constant frequency. Check out the newer videos on the channel, you'll enjoy them if new to the electrical trade! 🙂

@unfoldingcactus33 Жыл бұрын

@@BecomingAnElectrician Just subscribed!

@BecomingAnElectrician Жыл бұрын

@@unfoldingcactus33 Great, thanks so much! Reach out any time.. I also have that free electrician book for apprentices on the website.. a good read if new: becoming-an-electrician.com/

@mikenormandy9250 2 жыл бұрын

Don't forget Ideal, Southwire, Channellock, Crescent, Knipex, Wera, Wiha, (even Husky (HD) and Kobalt (Lowe's) make some decent, cheap tools that will ALWAYS get the job done! Klein is overrated to me, For the same price, Knipex makes AMAZING hand tools (not screwdrivers unfortunately) but linesman, dikes, needle nose, pump pliers, are just THE BEST! - The best grip, best feel, best cutting edges, and by far the lightest tools...Just better in every way AND the same price as Klein...Check em out. Wera for screw drivers/nut drivers...Wiha is another GREAT german brand, That won't break the wallet...May I suggest starting with a pair (or two) of the Knipex Cobra Pump Pliers (channelocks as we say)....250mm is the 10" basic size and the 300mm is the basic 12" size....also for smaller or baby pump pliers the 180mm = 7.25" are great...Check em out!

@BecomingAnElectrician 2 жыл бұрын

Hey thanks for checking out the video.. I've seen the Knipex lineman's on site one time.. a buddy had one of this knives chip in less than a month of use! (That can happen with any brand). I know Knipex is also a great brand out there, too.. If you check out my other video, I talk about "getting the right tool for the job by the right company": kzfaq.info/get/bejne/a6eqjJeel62xdWQ.html Wera is a really cool company, too.. so much valuable knowledge on the job site when you get to work with many people over the years.. especially the older guys.. always got some cool tricks.. Appreciate the comment.. thanks for the recommendations 🙂

@blairwilson9272 Жыл бұрын

Knipex do make screwdrivers

@DB-qb7rp Жыл бұрын

Mike, Mike. You must have been around awhile. You are not suppose to call them dikes anymore, that could offend someone. They are diagonals or as referred to in the video, side cutters. But Mike, I am with you, they are dikes.

@heabyk8453 8 сағат бұрын

Nice choice of brands dont forget BACHO the best cresent !!!

@hazelpark8752 Ай бұрын

cutting a live wire without turning off the electrical circuit? Does the insulation on the tool prevent electrical shock? :O

@BecomingAnElectrician Ай бұрын

Yes, both the plastic and rubber are designed to protect from shock.. rubber is more common. If you cut just the hot wire, you will not see the arc (spark). If you cut both hot & neutral, you will get the bang, and destroy your cutters.

@hazelpark8752 Ай бұрын

@@BecomingAnElectrician Sounds wild! Is there any other safety equipment? looking forward to hearing about safety topics in your new video.

@BecomingAnElectrician Ай бұрын

@@hazelpark8752 Basic P.P.E are your boots (rubber soles), safety glasses, gloves.. and serious stuff are things like Arc flash suits. becoming-an-electrician.com/