Learning different Skills For Different things for Model Railroading =ALL Good👍
@Kens2654 ай бұрын
Yes, thanks
@StoneKathryn5 ай бұрын
Thanks for showing the Kadee couplers. I had never heard of those. The snow came off pretty easily. I never looked that close at the cars to see the different ways they attached. This is interesting Ken. Thanks for showing that. That is joyful to see then hook up! I think it's great to see each of them hook on to the back. You'll never have to mess with those cars again! Darn, the cars fell over. You gave it a try. Thanks for this video Ken. It was fun to watch. I look forward to the next one with another engine to pull it.
@Kens2655 ай бұрын
Thanks. I just took the new locomotive out of its package today.
@wolfpacva5 ай бұрын
Nice to see you are back having fun with your trains.
@Kens2655 ай бұрын
Thanks I’m excited too.
@josefreck11035 ай бұрын
Ken und wieder ein super Video gemacht einfach Spitze 👏🏻👋🙂🤗🙋♂️
@Kens2655 ай бұрын
Thanks
@danielconant7495 ай бұрын
Hi Ken looks like there is a problem with the track where the derailment happened. I could see the green car shaking every time you added a car. Hope there was no hazardous chemicals involved with that derailment. 🤣 In my younger days I built a large layout in large room. When came time to move I tore it all down and packed it away in boxes where it has been for the last 40 years. Now I spend my retirement years restoring old radios.
@Kens2655 ай бұрын
Haha. Sounds like you have a fun hobby
@aussiebigbangers5 ай бұрын
Great to see someone showing so much joy with the hobby love your videos .look forward to the next one .
@Kens2655 ай бұрын
Thanks for watching!
@frankortolano58865 ай бұрын
Well I've be,,,I'm a 40 year carpenter and a 35 locomotive engineer. I knew there's was a reason I like yah
@Kens2655 ай бұрын
Cool haha. Two great occupations
@wingman84475 ай бұрын
Such a nice hobby for your off times. Always something to putter with.
@Kens2655 ай бұрын
Yes definitely
@schwabrichard98295 ай бұрын
Goodby Rapido couplers and hello magnetic couplers! You need to place the magnet under your track. Backing over the magnet will unhook the coupler. If your coupler heights are off they will uncouple also. Take a scotch bright and a little rubbing alcohol and clean your track.
@Kens2655 ай бұрын
Thanks
@rdyardie5 ай бұрын
In answer to your question, "Yes they can!" 😊 . . . "They can make it up the hill."
@Kens2655 ай бұрын
Haha
@kennethconaway35014 ай бұрын
Glad you were able to get 13 cars with two locomotives! Congratulations on a new record for you.
@Kens2654 ай бұрын
Thanks!
@bryangiffin96955 ай бұрын
Nice to see you having so much fun with this set up. Lots to learn, right?
@Kens2655 ай бұрын
Definitely fun and yes lots to learn
@bobainsworth50575 ай бұрын
Lightest cars on end. Wish I lived closer to you, id love to help out.
@Kens2655 ай бұрын
Thanks I can do that
@robertstewart56855 ай бұрын
As you get farther down the rabbit hole in model trains, you can buy Kaydees for passenger cars, the other thing is metal wheels roll so much better than plastic, and weights in the cars help, I can pull 35 cars but the locomotive struggle’s
@Kens2655 ай бұрын
Wow 35 cars
@cmc71065 ай бұрын
Good to see you enjoying yourself in the off month ❄️🥶
@Kens2655 ай бұрын
Thanks
@harmelgill6275 ай бұрын
Great to see you enjoying your creation! For newbies like me, this will be very helpful moving forward. Cheers
@Kens2655 ай бұрын
Thanks. We’ll learn together
@amyreynolds36195 ай бұрын
Kadee 505 for your passengers cars . If you buy passenger cars that are streamlines need kadee 508. Go to a hobby store near you you also need a tool to bend to the the rod that hang down.
@Kens2655 ай бұрын
Oh. Thanks actually next week I’m traveling to a big train store in Massachusetts. I’m drooling already
@dorisharrison98855 ай бұрын
If you try and don't succeed,try,try again,ha ha 😅😊💜
@Kens2655 ай бұрын
Haha true
@charlesboudreau58495 ай бұрын
Love trains. My first was a wooden one carved and built by my grandfather.i had 3 trains growing up.passed down to grand kids and now 3 of my great grand kids have them. Such a blessing to see played with . Old memories. Love to watch you being a kid again✌️🇺🇲
@Kens2655 ай бұрын
Nice. I like that
@marktimmer43705 ай бұрын
Kadee makes products for many of your problem cars. You may want to make them body mount instead of truck mounted.
@Kens2655 ай бұрын
Thanks I’ll keep that in mind
@larrybailey4263 ай бұрын
Hi Ken, been following you fot a few videos. Recommrnd you review a vidro from Ron at Classic Model Trains: "Tune up that cheap rooling stock. Less than $8.00 to make em run like a High End car!". He covers weight, couplers, body mounts and wheels. He also has one on tunning passenger cars. Note: he has videos on other model railroading subjects you may enjoy. "Keep Having Fun!"
@Kens2653 ай бұрын
Cool, thanks!
@amyreynolds36195 ай бұрын
You have to body mount all your couplers on your cars. Plus you need to buy a height gage when you install the couplers on the cars.
@Kens2655 ай бұрын
You’d think a little train wouldn’t have to be so technical but I’m learning. Thanks
@toddpacheco47485 ай бұрын
Well Ken as they say try try again and I know you will set the record with twelve cars 😮😊❤
@Kens2655 ай бұрын
Haha I will
@tomhaire47585 ай бұрын
Still, a great job Ken
@Kens2655 ай бұрын
Thanks
@jorgernst94725 ай бұрын
You can get Kadee 232 Draft Gear box and Lid that will allow you mount the couplers to the body of the car, especially the passenger ones that you like. All you have to do is glue the boxes to the body. You might also want to invest in a Kadee cuopler height gauge to amke sure your couplers are the right height and prevent accidental uncoupling.
@Kens2655 ай бұрын
Thanks I may do that
@Ruggedrails5 ай бұрын
Great let’s see it 👍
@Kens2655 ай бұрын
It’s coming. Thanks for watching
@johnlynn49455 ай бұрын
Invest in some magnetic screw drivers. Will make a huge difference!
@Kens2655 ай бұрын
I was thinking that as I worked on it
@clarencewiles9635 ай бұрын
The magnetic system requires a coupled magnetic metal plate. You need a system for the magnetic Also it may be time to clean the trucks on your engine. The wheels will build up carbon and will need to be cleaned.
@Kens2655 ай бұрын
Interesting I just did that this morning. Thanks
@mackfisher44875 ай бұрын
Ken come to Chicago and blow this snow away please.
@Kens2655 ай бұрын
Haha ok I’ll charge my other battery. Actually we lost power half an hour ago high winds
@raynall35932 ай бұрын
i have used the Kadee couplers before and loved them, they worked with the originals so the ones you cant change should work good with the Kadee. yes the weights matter a lot, also the alignment, should be a standard for the height of the coupler from the track but some car actually get lifted up if they are not weight right and then the flange of the wheel jumps over the track, cause coupler is a lil low. Reason you get a kick, cause modelling is like real, you want it to be almost real and coupling is a real thing really done
@Kens2652 ай бұрын
Thanks good to know
@rdyardie5 ай бұрын
You might need some tweezers to handle those tiny screws. 😮
@Kens2655 ай бұрын
Yes. I ended up using needle nose pliers
@lmars59335 ай бұрын
Be confident my friend you will get figure out...😎
@Kens2655 ай бұрын
Thanks
@oldnstillworkin57095 ай бұрын
Thought KD had a number of different styles to fit different manufacturers.
@Kens2655 ай бұрын
They do I’m just not sure which ones to get
@elleryparsons24334 ай бұрын
Patience my Friend Never Rush Working on Rolling Stock.
@Kens2654 ай бұрын
You got that right!
@elleryparsons24334 ай бұрын
That’s Right.
@davidwilken35845 ай бұрын
Look at your engines coupler. Odds are it’s not moving enough as the coupler box is not allowing it to sway as it’s fitted to the body of the engine.
@Kens2655 ай бұрын
I’ll check that out
@fleischmann_rowa_roco_ho5 ай бұрын
👍🏻👍🏻👍🏻
@Ruggedrails5 ай бұрын
I still think they will make it but perhaps not going fast LOL!!
@Kens2655 ай бұрын
I think I figured it out
@elleryparsons24334 ай бұрын
When Coupling Or Installing Couplers Check your Car Height see which Car Is Higher Than Other and There Ya Go.
@Kens2654 ай бұрын
Thanks
@jankas645 ай бұрын
i think the problem why not hooking is out of lvl to each other but as you already got the kade that is us kind go for it.🙂
@Kens2655 ай бұрын
Interesting thanks
@michaelmcgrath77125 ай бұрын
Runaway Train !!
@Kens2655 ай бұрын
Haha
@outlawten57505 ай бұрын
Needs a garage
@Kens2655 ай бұрын
Definitely
@barriesmith34895 ай бұрын
Ken i’ve call them bogeys most of my life magnetic screwdrivers help