No video
Red Frog Archery unbox and review the new Decut Charge arrow fletching jig
Рет қаралды 3,683
Күн бұрынThe Decut Charge is the latest iteration of the popular Decut jig formally know and the Nexus. The main difference is the use of light weight carbon in the clamp and the adjustable base allowing for a more comfortable working position.
This unboxing video reviews the jig and demonstrates it use. Probably one of the most flexible jigs as it can fletch straight as well as variable degrees of left and right wing. A superb inexpensive jig it is all you will need for your fletching needs.
Find it on this link - www.redfrogsto...
@jake30966 Ай бұрын
Mine only has 2 settings , it has to the left RC 120° in the middle 90° and to the right CP120° . The bit you push it with , when set for CP , sits at the 90° then when you move it to the left it sits and RC120° and the allen key bit sits at the 90°so when set for RC the allen key sits at the 90° and when set for CP the allen key sits under the 120° so how do you set it foe 4 Vane? Mine will only let me select 3 Vane for RC and CP
@jake30966 Ай бұрын
Ive noticed that all compound archers have their cock vane sitting 90° from the string so when arrows on biw the cock vane sits at the 9 o'clock position , does it matter with compound bow when using dropaway arrow rest ?
@andrewfernandez8330 3 ай бұрын
I have a question about the degree adjustment. So if I want to achieve a 3 degree, can I only adjust the rear adjustment or do I need to also adjust the front as well? The hash marks are cool but they do not show what degree you are achieving. TY
@redfrogarchery 3 ай бұрын
each mark is 1 degree
@andrewfernandez8330 3 ай бұрын
@@redfrogarchery Ok so if that is the case, that would be 7 degrees each direction available? Is that correct?
@peterp1143 5 ай бұрын
Those have very weak magnets. If you don't hold clamp down while glue dries, clamp lifts off arrow.
@redfrogarchery 5 ай бұрын
This is the new model and we have not found that to be the case
@peterp1143 5 ай бұрын
The magnet system is still the same. They're weak and will lift the vane off the arrow unless you apply downward pressure with your hand while glue dries.
@tullymahin 4 ай бұрын
@peterp1143 No, it's not.
@HuckFTW 5 ай бұрын
What is the max degree of offset? How well does it contour vanes to the shaft at that angle?
@anthonytucker1175 4 ай бұрын
Not good I got one hoping for a decent product does fine for vanes less than 3 inches runs into problems with small diameter shafts and longer vanes
@jake30966 Ай бұрын
So do i just put shaft onto this and just attach vane or is it not that simple ?
@redfrogarchery Ай бұрын
You need to put the nock on first.That locates on the receiver
@darcyleepearson4416 3 ай бұрын
Trying to get my head round compound setting what's the difference in placement to the others?
@redfrogarchery 3 ай бұрын
The vanes sit at 90° to recurve so the cock vane sits vertically.
@redfrogarchery 3 ай бұрын
The nock on a compound arrow is 90° out from recurve so the cock vane points up