I’ve been waiting for this. Marine engines are the hardest working engines and it is going to be nice seeing how these mods hold up.

I'm really looking forward to episode 3 of "The Road to Horsepower." Thanks for posting these vids.

i’ve never clicked so fast haha i’ve been waiting for this

I love the header in the water idea. I hate hearing guys ripping straight piped mud motors while I’m duck hunting.

BOATS AND BROS! 💪🏼💪🏼💪🏼💪🏼💪🏼💪🏼💪🏼💪🏼💪🏼💪🏼💪🏼😂

It was very kind of you to do a recap of the build for blind mechanics...Great to see Skidmark again.He's so 'swole' he grew right up.He shouldn't use the prop as an auger in the mud though.That does look like a great set-up. Guesses=11.28 Hp,and 16.2 Lb.Tq.

Gosh Darn ! Braxton be Dredgin Da Creek !

Skip the mud skipper surface drive. Get a PPF mud motor then stick this engine on it. Under water exhaust will be cool.

This channel is highly underrated

You should get fancy and swap the pulleys on the surface drive and run the juggernaut on it

Let's see the puppy run

Bro idk if you've done this, but a beginner build series would be dope. Going into more detail for people not as familiar with engine work

Bring back the 4x4 buggy!!!!!!!

670cc supercharged mud motor next? 👀👀👀

I'm all in at the 12th 11.5 to 12 horse Red Beard never put the shims in the description of parts needed for the crank I'm glad he didn't forget I've been wondering what happened with that motor Braxton will be loving it red beards number one

That's just for future reference to y'all on most of yall's builds to come also to. One more thing good 🤞 luck on your engine build to guys.

Loving the mud motor content

A quick tip trick to y'all on the mounting the engine back on for the belt. You can use A wooden dail rod pin to align the shaft into the belt drive pulley.& Mounting plate bracket to.

You had 15 more minutes to do the dyno - player 😂😂

so cool

I’m really excited about this project. I have a tillotson 212 cc with a stage 1 and Robertson’s torque tube on a 85” swamp runner longtail. I may be upgrading after hearing y’all’s results with this.

Awesome video!

Nice video

Good stuff. Thanks for the video.

Hello Red Beard dude :) My guess is 9.5 HP and 11TQ Get-Er-Done bro!!

So is this a continuation of the "Boats and bro's" series?

its State Law to do the Freiburger "long pour" when using Amsoil products.

When is the next 212 Stage Dyno run? I've been waitingggggg! You're slacking!

I love your videos! I have learned so much watching you. Could you update the tools used in the description with the piston spring compressor you used in the video? I appreciate all that you do. Have a blessed day.

I can't seem to motivate my big ass to do cam/springs to my gx390 on my mud boat. Can't wait to see the performance increase on your dyno and that custom exhaust placement

Wish you had dynoed it stock

When you going to put mud skipper on dyno. Like to see how much horsepower it makes.

Ever thought keepn old parts n doing give aways or just random sending to viewer's or live type game thing ppl could use them parts lol

I'm wondering how well this will work. I've been thinking of going to the billet flywheel but part of having a mud motor is you need that extra rotating mass to chop through things. Need to see if it's worthwhile to spend the money on

Hey I have a duromax 440 with exhaust and gov delete + springs. I don’t wanna drop $120 on a billet flywheel. Could u make a video on how to modify the stock one or if I should at all?

I know this off topic but I'm new to tinkering with small engines and purchased a Coleman 200u. I've watched all your videos on the bike but in ur opinion what is the best hop up for factory colleman bike that I can get off Amazon that isn't more expensive than the bike itself?

You should dino two brand new predators same engines just to see the difference if there is any how much from factory and the reason there would be any difference

Wouldn’t the pipe stuck water back up in the exhaust when the motor shuts down?

I’ve heard to not remove the governor on a mud motor because if the prop kicks out of the water and it over revolutionizes it can throw the gears out or strip everything out. Does that sound realistic ?

Hey red beard, I have two questions for you. #1) have you ever heard of, or do you see any problems associated with using a dirt bike/four-wheeler engine that revs much higher for use in a mud boat. For example, a xr400 engine makes 30+HP and redlines close to 10000rpm. With these 1:1 crank/prop speed, it seems like if you want to go fast, you need lots of RPMs. A lot of the Japanese dirt bikes/four wheeler engines are small and make lots of power at high RPMs. It seems like you can Cruise one at 6,000 RPM all day. #2) I have an old Honda FL250 odyssey. It has the crazy loud 250cc 2-stroke engine. My land is situated close to neighborhood homes. I have thought about putting a 420 / 440 / 459 in it to quiet it down and give me more low in power. Do you think that would be worth it or just an insult to remove the 2stroke? It runs great as it is, just LOUD

When’s the dyno video coming out?

What's up with all the dead space at the end 😂

P half the videos blacked out I got excited and thought you were going to finish it at the end and it's just black screen

Wish you'd update the piston ring compressor link to the solid sleeves like you use. The Amazon one works but its a pain sometimes.

what happened to the 212 got a dyno and dont use it

More dyno please

“Mad enough to punch a church baby!” BWAHAHAHAHAHAHAHAHA😂😂😂😂😂😂

Are you going to put part 2 out or not?

Can you Engin Dino, the methanol ghost I need to see how it is for my weldingexpo

I have a go-kart but I don't know how to do the rear end it's broken by the accent and I don't know how to order one but I know it's a 44 by 32 I'm going to say but I'm not sure I ordered one and it came too small the rearing bars too skinny I needed more thicker how do I go about getting one

I have a harley golfcart and a duromax 440 would you be interested in building it?

Can u dyno a stock ghost 212 with governor removed please

Lmao Why do u add extra alphabets and an extra syllable to the word "Oil"

More more dyno....

video is kinda a let down for me. quality content doesnt have a time limit but the full story needed to be told. I personally would have loved to see a stock dyno pull, teardown hyperlapse, condensed build, followed by 1 dyno pull & new engine numbers, and wrap up the video with Braxton Rapppping it up on the water! just say "links to how-to's in the discription as well as the parts used on this build". Obviously dont need my help running a channel, just my opinion. maybe a few will like this comment to affirm it.

Vids still broke at the end lol

e