ALL LIMITERS DELETED! CFMOTO G2 ZForce 800 950

Рет қаралды 19,993

8 ай бұрын

for all of your CFMOTO needs check out www.rngperformance.net
Join this channel to get access to perks:
/ @r.n.gperformance
#CFMOTO #CFMOTOUSA #RedNeckGarage
Thank you for all of your support we hope to keep bringing you more content and we hope to get better and better.
PLEASE LIKE, SHARE, SUBSCRIBE and CLICK THAT BELL!!!
Here is how you can support us.
/ redneckgarage
If you would like to donate to the channel feel free to PayPal me AT stephenhayes1988@gmail.com OR
paypal.me/RedNeckGarage1988
Want to Buy our Clothing?
teespring.com/stores/redneck-...
My Amazon store ATV/UTV Parts and accessories Tools and much more! check them out.
www.amazon.com/shop/influence...

Пікірлер: 154

@ronfohran71 8 ай бұрын

2022 UForce ?

@R.N.GPerformance 8 ай бұрын

Will work the same. As stated in the video

@ronfohran71 8 ай бұрын

@@R.N.GPerformance NICE!!

@MichaelTalley-vl2yn 3 ай бұрын

@R.N.GPerformance sorry this may have been addressed but I have a 2020 uforce 1000. Is it the same wires to cut and pin numbers. Or do you have any info on the 2020 uforce 1000. Thanks just want to be sure before I go cutting wires.

@robertmartinez9050 8 ай бұрын

This channel is so underrated. Thumbs up. Appreciate all the info.

@R.N.GPerformance 8 ай бұрын

Thank you 🙏

@brianwestman9523 8 ай бұрын

Saving the normal person money once again! Love it. Thanks RNG

@R.N.GPerformance 8 ай бұрын

We try my friend. Thank you 🙏

@MikeDennis-xb9qb 7 ай бұрын

hello Steve . Thank you very much for the info on deleting the limiters . works fantastic . Cheers

@R.N.GPerformance 7 ай бұрын

Your very welcome 🙏

@truckdriver656 8 ай бұрын

thanks for sharing you are a good man

@R.N.GPerformance 8 ай бұрын

Your welcome 🙏 thank you 🙏

@SaboSells 3 ай бұрын

Just did the mod to me 2022 ZForce 950 HO Sport. Haven't even drove this thing yet, it's got 7 miles on it and I can't stand the thought of an 18mph limiter in low. Broke all the back plastic cases to the backs of the plug modules. Couldn't figure out how to get them off without breaking them. Mine was the bottom connector and it was behind the passenger side, flipped 180 degrees from the one in this video. Thanks for the mod video, fantastic!

@ronprotech9922 8 ай бұрын

Great information, glad to hear it will work on 22 Uforce 1000!

@R.N.GPerformance 8 ай бұрын

Thank you 🙏

@lanceberwald9217 8 ай бұрын

Great video.

@R.N.GPerformance 8 ай бұрын

Thank you 🙏

@ozarkcharlie9331 8 ай бұрын

Love the tech tips Brother. I'm ever out yur way we're going to lunch.

@R.N.GPerformance 8 ай бұрын

Thank you 🙏

@Texas_Radical 8 ай бұрын

@@R.N.GPerformance I still have a few buddies up in the C-Bus that wheel, one has a few jeeps and the other has a SxS. Id love to hook up when I get up that way and check out that park you got up there. Thx for the info, ima have to do mine up...

@butchbissett2634 6 ай бұрын

I'm an old fart that still likes to have fun,I did it on my '23 600 uforce works great. I'll be buying a clutch kit soon. Keep up the good work👍

@R.N.GPerformance 6 ай бұрын

Thank you 🙏

@jasonw3278 5 ай бұрын

How do you like the 600?

@jcridley2828 8 ай бұрын

I don’t even have a Cfmoto but I’ve been sold on it. I waiting until the end of 2024 to get one of the new Cfmoto ZForce 4 seater. I’ve been watching for a couple months and I know so much about Cfmoto thanks to you brother.

@jcridley2828 8 ай бұрын

Btw you did a similar project previously but you pushed the pin in before. I assume these don’t have pins?

@R.N.GPerformance 8 ай бұрын

Heck yes 🙌 that’s awesome 😎 thank you. You can definitely push in the on also. My rigs I just snip the wire lol.

@Heman-dl5rq 2 ай бұрын

I bought a 2024 Sport 4, 500 miles so far, and my dad has purchased some of your stuff for his 2023 HO EX. He warned me about the limiters but so far the only limiter I have found is the seat belt speed restrictor. Low gear does 36mph, I can go full speed in 4x4 high and low

@davidowen888 8 ай бұрын

No Fun Mode 😅😂🤣 that's Awesome ! I gotta write that down 👌

@R.N.GPerformance 8 ай бұрын

😂 😂 right.

@richardr1790USCG 8 ай бұрын

Thanks Steve! Although I don't have, nor will I ever have a SXS, I appreciate the ability to learn. I prefer the open air of ATVs and road bikes. I watch your video on the removal of the low gear limiter on the Overland. I think that is the only nanny on that machine. If you know of any others I would like to know.

@R.N.GPerformance 8 ай бұрын

You’re very welcome 🙏. Absolutely brother.

@43dukedog 6 ай бұрын

My 2024 uforce 600 has absolutely no limit on seatbelt , low gear , reverse , or difflock ! Love it guess I got a good one somehow !

@juliovillegas2707 7 ай бұрын

Hi, I've been following your channel for a while. I'm from Spain and I have a cfmoto 625. You could do the ECU cable thing. Come on. Greetings. Thank you for your channel. It's great.

@happyhunter09 8 ай бұрын

When you were reading disclaimer before video, you forgot to do the air quotes with the fingers afterwards lol

@R.N.GPerformance 8 ай бұрын

😂

@gregbassinger 6 ай бұрын

2023 950 HO EX? I watched an older video where you only pushed the one wire (YL 24) back through the wire housing. On this video you clip three wires.

@R.N.GPerformance 6 ай бұрын

That’s because this is a different unit and has multiple limiters.

@randytrivitt6539 2 ай бұрын

Absolutely!! I love and appreciate your videos very inspirational!! Thanks for what you do!! Sticking it to Uncle Sam!! LOL... 😂😂😂😁 💯❣️🇺🇸😍💣💥🔔🔥🙌❤️🤍💙👍👍👍👍

@kevincassidy2182 8 ай бұрын

You’re always reseaching and testing !! Then provide the “How to “ videos for free.. You will succeed and grow my friend, DOING IT RIGHT !!!!!!

@R.N.GPerformance 8 ай бұрын

Thank you 🙏 we try our best for sure.

@user-bc3ic1lp2e 8 ай бұрын

I bought a brand new 2023 gen2 950 last July and was so worried about needing to do that to mine but low worked just like you were showing not limited at all and mine was never altered. Reverse is only one that's limited, guess I just got lucky ? P.S. great video's

@R.N.GPerformance 8 ай бұрын

Yes sir. You are a lucky one. I had the same thing happen with my UForce.

@AnthonSa 8 ай бұрын

I have a 23 950 trail bought in Canada and my low gear does not seem to be limited from factory... override bypasses the forward diff lock. Just my reverse is limited. Sounds like the same as you.

@wcowger22 8 ай бұрын

2024 950 sport does not seem to have the limits in low or in diff lock, also came with a parking break, either I got lucky or CF made changes for 24 model year.

@Gary-G 8 ай бұрын

Outstanding!!! Do you have clutch kits for 950 trail Gen2?

@R.N.GPerformance 8 ай бұрын

We sure do.

@achsrebel 8 ай бұрын

Awesome saving everyone money. Did you know those new tires have different side wall patterns?

@R.N.GPerformance 8 ай бұрын

Thank you. Which new tires?

@achsrebel 7 ай бұрын

@@R.N.GPerformance sorry just now seeing your reply. The ones on your new unit

@PIZZAMANGAMING 8 ай бұрын

Going to try this on my Uforce 600 worst come to shove I’ll just have to splice them back together.

@R.N.GPerformance 8 ай бұрын

It will work.

@bowhuntinbob9207 5 ай бұрын

I want one so bad

@marko-10 6 ай бұрын

👏

@71Dragtruck 8 ай бұрын

What if you just pulled the pins, put tape on the end tucked them into the harness, that way if you ever needed to take it in for a warranty claim you could just put them back.

@R.N.GPerformance 8 ай бұрын

Absolutely you can do that.

@justinsears8001 6 ай бұрын

I have a 2023 uforce1000xl and was wondering the same thing. I'm going to try pushing the pins instead of cutting them.

@know_lesclutch8567 5 ай бұрын

@justinsears8001 how did this work out for you?

@mohepworth6407 Ай бұрын

same. wondering if it worked

@gk....1977 8 ай бұрын

I have a 2019zforce 1000 The Gen1 Can i also do that?? Where's by my unit the ECU? NICE VIDEO😊

@platinumf2505 7 ай бұрын

Hey guys works on a g1 zforce 950 but it’s the bottom plug. The ecu is flipped. Idk how fast it will goin reverse but I hit 22 mph.

@markrodier4899 8 ай бұрын

Ok stephen will it work on 21 950 sport, with ecu behind pass seat? Nice video!

@R.N.GPerformance 8 ай бұрын

Yes.

@markrodier4899 8 ай бұрын

All three wires?

@mastando74 8 ай бұрын

Great channel my friend! I'm having some issues with a rocker switch I installed with the nitlight 24" bar, my rocker switch has constant power to it with no key. The 2 black jumpers are on the top left and right, the red is in lft center n jumped to the right bottom and the white is on the bottom left. I have switched the 2 reds and the white all around and I can't get the switch to work with only the key on. Any ideas what im doing wrong?

@R.N.GPerformance 8 ай бұрын

Thank you 🙏. Check out this video How to wire a 5 Wire Rocker switch The correct way kzfaq.info/get/bejne/er6EfdCoq7m2nI0.html

@trucker4106 5 ай бұрын

Can u tell us how to do this on 2021 cforce600T pls

@Bearsdenadventurues 3 ай бұрын

hey brother couple ?? for you 1 is this delete the same for my 2022 zForce 950 HO sport and 2 if i get a tune later would this being done cause any issues . thanks for all your work on the videos . soon as i can i will hit you up for a clutch kit. just got my unit last week got to recover a little cash so we can play. lol

@atvcfmotoslovakia Ай бұрын

as it is on the ATV x800. ??

@happyhunter09 8 ай бұрын

wish we coulda seen wheels spin in grass

@R.N.GPerformance 8 ай бұрын

You will soon enough 😂

@buddyhatcher1096 3 ай бұрын

Does this work on a 2020 zforce 800ex and if so what wires do I cut

@gk....1977 8 ай бұрын

I have a 2019 Gen1 zforce 1000 EUspec. Can i also do that? Low and reverse is the problem 😊 And where is my ECU in the unit? Great Video!

@R.N.GPerformance 8 ай бұрын

That ECU is under the dash driver side just above the tire.

@gk....1977 8 ай бұрын

@@R.N.GPerformance have i the same ECU to cut the same wires...?

@timhancox656 8 ай бұрын

so pin 6 pin 24 pin 29 is that correct thanks

@mjuhanil 8 ай бұрын

Im in Canada and the only limiter mine has is reverse. Also our prices are way too high

@AnthonSa 8 ай бұрын

Prices for parts are absolutely horrendous through cf moto. I honestly wish I knew did more research and knew that before purchasing my machine... suspension bushings are 17.50 EACH. Nearly 600 bucks to replace them all around when the time comes. Sure, spend less buying machine, but pay for it in the long run for their parts.

@mjuhanil 8 ай бұрын

@@AnthonSa The prices of the sxs are high too. The gen2 950 sport is $24,000 plus tax

@R.N.GPerformance 8 ай бұрын

We have poly bushings in stock way cheaper than that.

@R.N.GPerformance 8 ай бұрын

Yikes 😬

@AnthonSa 8 ай бұрын

@R.N.GPerformance the short bushings that fit the gen 2? Will definitely look into that option once mine start going... I stay on top of them and grease regularly, so it's to be determined yet how long they will hold up.

@michigandirt619 8 ай бұрын

Do you have a video like this for the cforce 600?

@R.N.GPerformance 8 ай бұрын

I have a video that explains how to do it on the ATVs search CFMOTO limiter delete

@ionutsorin6338 2 ай бұрын

On cf moto 520l ?

@kenankarasuljic8946 6 ай бұрын

Its works on cforce 600 2023 ?

@zforce800 3 ай бұрын

Hey is this only for older machines I have a 2019 cfmoto zforce 800 trail and would love to try it. I have your primary clutch kit and secondary clutch kit with R1 helix clocked at B2 and not enough power and speed for me

@PabloOfRivers 8 ай бұрын

Curious, EU models haven´t two limits only: 60km/h max speed (due homologation) and 45km/h with lock differential.

@R.N.GPerformance 8 ай бұрын

That I’m not sure about buddy.

@WildBoys69420 8 ай бұрын

what about a 2023 cforce 600 ?

@R.N.GPerformance 8 ай бұрын

See my cforce video

@stateofmainefishing 8 ай бұрын

my friend got the same rig new. seems like it has to get to 2800 rpm before it wants to move and when it does it sounds like the drive shaft has major clunking noise's but the dealer says it's normal what do you think????

@R.N.GPerformance 8 ай бұрын

Yes. He would want to get our primary clutch kit it will smooth that right out. I’m out of stock on them but as soon as I get them back in stock I’ll be doing a video.

@ryanfx4rh 5 ай бұрын

Does this also work on the uforce 1000? I’m buying one here in the next week or so

@R.N.GPerformance 5 ай бұрын

Yes. But you will want to look up my video for the 950ho the UForce will follow that video

@Rainer_Zufall_ 7 ай бұрын

Hello Steve, does it work on my 520 CForce MY 24? Thanks in advance and greetings from Germany

@R.N.GPerformance 7 ай бұрын

I’m not sure buddy

@UnknownMOI 8 ай бұрын

Fyi for some reason your video was in one speaker only no stereo 😮

@R.N.GPerformance 8 ай бұрын

I’m not sure why because it plays on both left and right on my phone, tv and computer 🤷

@jonpayne1300 8 ай бұрын

Can the pins be pushed out instead of cutting

@R.N.GPerformance 8 ай бұрын

Absolutely 👍

@rep9118 3 ай бұрын

This work for a 2016 zforce 800?

@vincechristian239 8 ай бұрын

Where is computer on 2022 zforce 800 trail

@BlackAvonBoy 4 ай бұрын

22 cforce 400L ?

@kenankarasuljic8946 6 ай бұрын

Its same wire on cforce 600 2023 ,help me

@Vajrus 22 күн бұрын

So I can either cut or push-out all those pins - it gives same outcome, right? Doesn’t work for me for 950 Sport 😢 I pushed out all the 3 pins correctly and no difference. Still 60kmh limit. Do I need to reset the battery/ecu? Any other tips?

@TheSpeedyhensley 8 ай бұрын

Is it the same wires on 2022 zforce 950 ho ex

@R.N.GPerformance 8 ай бұрын

Yep it sure is.

@petekulik3945 8 ай бұрын

Hey bro is it only gen 2 or can you do it on 2019 z8

@R.N.GPerformance 8 ай бұрын

You can do it on any model. It will just have a different ECU and different wire.

@wooblebloc 8 ай бұрын

I think next year ill trade up my zforce 1000 sports R with one of these bad boys

@R.N.GPerformance 8 ай бұрын

Oh for sure. Well worth it.

@motodrang4287 Ай бұрын

Do you guys think the 800 z force trail can handle sand dunes? Torn whether I should spend more on the 950.

@R.N.GPerformance Ай бұрын

I would opt for the g2 950 sport. You will absolutely hate the trail model of any make

@motodrang4287 Ай бұрын

@@R.N.GPerformance thanks! It’s tough because my group rides the small trails (50” posted) and my wife wants to drive. I’d go for a quad otherwise.

@chrisplace8660 8 ай бұрын

Does this improve acceleration, or torque, or both? Thanks.

@R.N.GPerformance 8 ай бұрын

Neither. A clutch kit will do that. We have kits available send us a message www.rngperformance.net

@chrisplace8660 8 ай бұрын

Ok, so this only deletes the rev limiters? Thanks.

@garrickbrandon7150 8 ай бұрын

Does the clutch kit work in reverse for it not jerking mine does it bad

@R.N.GPerformance 8 ай бұрын

Yes sir it does. Will make it butter smooth.

@garrickbrandon7150 8 ай бұрын

@@R.N.GPerformance how much it costs I won't the best you sell

@outdoormayhem31 8 ай бұрын

Which wire cuts off the rev limiter?

@R.N.GPerformance 8 ай бұрын

None.

@Gokywildcats11 8 ай бұрын

DO YOU PICK WHAT PINS YOU WANT TO DO, Can you go back and fix what u just cut

@R.N.GPerformance 8 ай бұрын

@user-gw8qn2ui8f 5 ай бұрын

Will this work on the 950 HO?

@R.N.GPerformance 5 ай бұрын

I have a separate video for that.

@coltonweber4905 4 күн бұрын

Picking up a 24 zforce 950 sport this weekend. This will work on that model? Anything else I should do right off the bat?

@R.N.GPerformance 4 күн бұрын

Yes it will. I would also recommend changing the stock paper air filter out for a uni air filter we sell www.rngperformance.net

@coltonweber4905 4 күн бұрын

@@R.N.GPerformance what clutch kit would you recommend? I want to put 30s on it

@williambixby2753 5 ай бұрын

What’s the difference between the factory fuel maps ?

@R.N.GPerformance 5 ай бұрын

@williambixby2753 4 ай бұрын

@@R.N.GPerformance sorry didn’t see your response. I just bought the 2024 zforce 950 trail and the guy at the dealership showed me like 6 different settings to choose for the fuel. I wasn’t sure what the difference is between the settings

@AnthonSa 8 ай бұрын

Low gear is limited?? At what speed/rpm approximately. I have a 23 950 trail purchased in Canada, and my low gear seems like it always has full power. Just my reverse is a pain in the ass

@R.N.GPerformance 8 ай бұрын

Some are some aren’t. 18mph

@AnthonSa 8 ай бұрын

@R.N.GPerformance oh shit, ya I've definitely made it over that with power reduction. That's terrible lol

@wooblebloc 8 ай бұрын

RNG = smart mans money savings mods.

@R.N.GPerformance 8 ай бұрын

💯 💯.

@ricardoandazola3535 8 ай бұрын

I bought a zforce sport 4 and it bogs out when i go full throttle in sport mode. But only in sport. In normal mode i can give it full throttle and everything is fine. What do you think might be causing that?

@R.N.GPerformance 8 ай бұрын

That I am not sure. Maybe ECU

@ricardoandazola3535 8 ай бұрын

Thanks for the quick reply! Love your videos! 🤙🏾