This video discusses how the payout fingers and reel bundle are used to determine a wining payout on an antique slot machine.
Пікірлер: 33
@VintageSlots6 жыл бұрын
If you have a question about a problem with an antique slot machine I recommend going to www.CoinOpCollectorForum.com and post your question(s) in the slots area. Lots of helpful people there.
@walterstevens46365 жыл бұрын
On my Jennings .10 cent, 4 reel,buckarool,slot-machine has a problem with the four reels all turning at the same time,ect.
@skidco13 жыл бұрын
Well, thank you from England for taking the time to make this video clearly explaining how the pay out mechanism works. My knowledge of how my own Mills machine is put together is increasing by the day!
@64rooАй бұрын
So very helpful....I think I've sorted my Nutt & Muddle & Sons "Silver Jubilee"
@JC-en3mt2 ай бұрын
Great information
@paulbedo69427 жыл бұрын
Its really good one. And well explained, Good job man
@huffiehuffie48634 жыл бұрын
thanks so much very help full . keep posting .
@MarkZorziАй бұрын
Question: My machine arm is going into the hole perfectly; however when it pushes the payout bar at the bottom, it does not push it in far enough, so the machine does not pay off with cherries. If I manually push the bottom bar, then the payoff will work. Is there any type of adjustments available to make the top bar push in the bottom bar farther? Thank You, MTZ
@babanul2 жыл бұрын
Hi... great video, I managed to understand how does it work. Quick question: I have an Aristocrat Arcadian tic-tac-toe model and I miss two payout fingers ( the orange and the prune)... do you have any idea from where I could buy some spares? Thanks!
@jimmyboe253 жыл бұрын
one of the disks on two of the machines ive looked at had a hole welded it seemed to line up with a bell fruit it seemed like a possible combo was deleted is this a correct assumption
@stevearnold39858 жыл бұрын
Do you work on them at all?
@zorro700666 жыл бұрын
Your videos are excellent, thanks...I just bought a Mills 1941 "Diamond" 5 cent machine for $700 in original condition and has been serviced, the machine works just fine but the reels with the fruit are a little out of alignment but it still does the proper payoffs. My question is with the mechanism out is it difficult to realign the reels so that the fruit will display evenly? Thanks
@VintageSlots6 жыл бұрын
No, it is not difficult. You need to loosen the two nuts on the axle which will allow you to align the wheels properly.
@plazro5 жыл бұрын
What is holding these payout fingers back on this video? I have this happening with my non-working Jennings Governor right now. Thanks in advance.
@roycampsall54828 жыл бұрын
I inherited my brothers Jennings Indian head 13 years ago, since last year it stopped paying out when a winning line came up, any ideas why ? Thanks.
@VintageSlots8 жыл бұрын
Could be several reasons: 1. No coins in the payout tube 2. Payout slides are jammed 3. Coins have fallen into the mechanism and blocking the slides 4. Broken springs
@GHILLIESARCADEANDMORE2 жыл бұрын
Cool
@scottlouie49882 жыл бұрын
We’re do I buy the paper pay out rolls Symbols
@stevearnold39858 жыл бұрын
I have a Mills wooden Nickel slot machine (Spearmint Bell) 1918.When I put a nickel in the reel does not spin but it still does a pay out. Can you help or do a video. I can send pictures of the back. I think a spring might have come off but I do not know where.Thanks
@VintageSlots8 жыл бұрын
Try posting your question in the Just Chatting area of www.CoinOpCollectorForum.com
@janejenkins95087 жыл бұрын
Jackpot party
@stevearnold39858 жыл бұрын
do you work on them ? This above my head
@VintageSlots8 жыл бұрын
I only have time to work on my own stuff these days. If you are in the Denver area let me know. Troubleshooting via email is very time consuming.
@VintageSlots6 жыл бұрын
I pretty much just work on my own machines. No time to work on others.
@robertheumaderbobber7 жыл бұрын
My mills machine pays 2 coined when it not supposed to
@bonsaibiker53785 жыл бұрын
clear has mud lol
@suecampbell74906 жыл бұрын
So where’s the rest of it, you haven’t shown how to make the slides co-inside
@VintageSlots6 жыл бұрын
This video was made to help out a person who contacted me about a specific problem. Go to www.IBuyOldSlots.com/dvd to see an entire list of help videos I made around slot machines.
@susanncampbell3476 жыл бұрын
VintageSlots yes I have seen your collection and as I said you haven’t done the rest showing how to make the slides co-inside
@VintageSlots6 жыл бұрын
Sorry, I don't have time to do a custom video for every single question. I do have a complete set of videos which document how to tear down and put a machine back together but those are not free.
@suecampbell74906 жыл бұрын
I didn’t ask for that I know how to do that with my eyes shut but you have done half a video
@VintageSlots6 жыл бұрын
The video I did was as a favor to someone who asked a few questions on the reel bundle. The video addressed his questions. I guess I should have just made it private and not share it with anyone. Other people have commented and said it is useful. Can't please everyone.