Refurbish Your Dartboard With These 2 Simple Steps

Рет қаралды 20,224

Күн бұрын

#Darts #Dartboard #Winmau
An easy option to making your dartboard look better. Enjoy the video!
If you'd like to support the channel for future videos... www.paypal.com/paypalme/world...
-------------------------------------------------------------------------------------------------------------------------
Track: Feel Good - [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Syn Cole - Feel Good |...
Free Download / Stream: ncs.io/feelgood
---------------------------------------------------------------------------------------------------------------------------
Chapters:
00:00 Bullseyes
00:32 Intro
00:37 Video Description
02:05 Damage To The Board
02:58 Trimming The Sisal
03:44 Coloring In The Segment
04:36 Fixing The T20
05:24 BOOM
06:34 Sneak Peek
07:02 Outro

Пікірлер: 66

@floridasavannah 25 күн бұрын

I have an older, different type of dart board. I was originally going to just throw it away after the wear & bullseye missing but this gave me the confidence to try to restore it. ♥

@boristheblade4052 11 ай бұрын

I use a lighter instead of the marker. Works much better👍

@toddockham6209 11 ай бұрын

same

@abzhuofficial 11 ай бұрын

How do you do that (use a lighter to refurbish a dartboard)?

@PatrickStar-zn9be 11 ай бұрын

@@abzhuofficialHave a guess...

@boristheblade4052 11 ай бұрын

@@abzhuofficial You use the lighter which produces fire to burn off all the sisal threads sticking out. And I also used tweezers once or twice. If you don't have a lighter. 🙂

@abzhuofficial 11 ай бұрын

@@boristheblade4052 Ahh, I see. Thanks for the tip here.

@Broccli87 11 ай бұрын

What I have done is gotten an old aluminum can and cut the shape of each section out then press it really hard against the board to compact the top layer of the sisal down worked wonders for me removing the bumpy uneven top layer, also you should try the darker orange sharpie marker it has a better colour match on the red as its less saturated

@turbogrooves 11 ай бұрын

Nice, I refurbished the black on one board a few weeks ago with a black sharpie. Looks sharp from the Oche

@JCoop831 11 ай бұрын

Another great video and tip to clean up the board!

@hotkey1327 10 ай бұрын

Nice tip, thx for the vid. My 1 year old WTCC looks like new again

@greggsmith7388 11 ай бұрын

Nice quick and efficient repair job. I would have avoided using those points right away if I had noticed the sisal pulling out. No reason to destroy a dartboard with aggressive points. Cannot wait to see the new Mission Samurai II dartboard review.

@zoltomar4759 11 ай бұрын

They look like Beau Greaves darts! Great tip with the marker, hopefully I still remember how to color inside the lines. 😂. Thanks for the video!

@leewilson7852 11 ай бұрын

Been doing this a couple of years but i use tweezers to pull the fibres out

@derekdodds1383 2 ай бұрын

I’ve also been using tweezers & markers for a while green works fine as well 🎯

@mssr77 11 ай бұрын

Small flush cuts work great also. They cut flush with the board and no need for sharpie in most cases

@benheckendorn2696 11 ай бұрын

It's really a great tip. 👍

@Timesend 11 ай бұрын

Awesome cheers 👍

@BernaHenriques 11 ай бұрын

Besides board rotation I won't make anything else to prolong the life of my dartboards. I have the G3+ and also the B6DC, so I won't have to buy a new one for quite some time. Those Beau Greaves in gold are just a thing of beauty, one80 still remains the most underrated company out there

@WorldwideDarts 11 ай бұрын

One80 makes some amazing all around products. From their darts to the G3 dartboard. I've always been a huge fan of their stuff.

@Cove_Ops 11 ай бұрын

Good idea 🤙

@IchliebeHunde58 10 ай бұрын

Thanks for the tip and video 👍 I like those golden barrels, what darts are those?

@WorldwideDarts 10 ай бұрын

One80 Beau Greaves

@tom-mf5lh 11 ай бұрын

I use tweezers to get the fibers out of the board then you don't need to use marker pens to colour in

@joshmondragon9916 11 ай бұрын

Those gold Beau darts are so amazing. 180 basically makes the best darts right now. I own the black ones and they have kept my Condors in perfect condition.

@jamieward8009 Ай бұрын

Not sure if it 'actually' helps to reduce the frequency of needing to repair, but I never grab all darts out of the board at the same time with one hand, even if grouped well - it just feels wrong to me, like you're going to twist some fibres up on the way out.

@jeremyfraser976 10 ай бұрын

Awesome

@brockseeman7808 11 ай бұрын

I keep a file right by my board so when i feel any burrs on my points i file them out, prevents pulling out of any fibers

@paulp.3429 11 ай бұрын

Nice . But after you trim the sisal. Use a tooth brush and work the sisal back into the board and then touched it up. all the best

@mariodesmet 11 ай бұрын

Hey, you tried different boards, what is the best in lasting Bulls I have the new nodor Supamatch3,i like trowing at the Bull 😁,after 4 months the Dart just bounce off the Bull😮 En from the look its not so bad Its my first Board,just badluck or is it for other brands the same

@WorldwideDarts 11 ай бұрын

I can't think of any bullseye that holds up all that well. If you walk into any American pub/bar where they play league all the boards will look in decent condition but the bullseyes will be trashed. It's from all the cricket we play. Maybe a firmer board would hold up okay. Something like a One80 G3 or the Target Aspar.

@mariodesmet 11 ай бұрын

@@WorldwideDarts It still looks good,but very hard, even the sharpest point wont penetrate,just bounce off 😔

@chrisgraves9430 11 ай бұрын

Nice quick refresh without breaking the bank 👍🏻👍🏻👍🏻

@lazzy2012 5 ай бұрын

Hello sir… I’m very new to darts 🎯, why does my throw always seem to veer off to the right, (even if I think I’m lining it up straight?)

@crooty9 11 ай бұрын

Another great vid, thanks for the tips! But when are we going to see a vid with three in the bull at the start??!! 😆

@WorldwideDarts 11 ай бұрын

kzfaq.info/get/bejne/a6mGl7iEyJ7Skpc.html 😁

@angelobianco73 5 ай бұрын

Nice vid! How can we whiten the whites?😅 my aspar came today, it looks absolutly flawless but, the whites not 100% white! It seem, the board already got little light brown mold dots an stains all over the board! As i said, other than that, it is build perfectly, would like to keep it! What would you do? Could white document ink work?

@WorldwideDarts 5 ай бұрын

Hmmm, good question. I really don't know as I've never messed around with the white segments. I suppose a white marker would work. You'll have to be the first one to test it out and report back. Maybe test on an old board first though 😁

@angelobianco73 5 ай бұрын

Textile Ink! Just found out!😅@@WorldwideDarts

@angelobianco73 5 ай бұрын

@@WorldwideDartsI'll let you know.

@WorldwideDarts 5 ай бұрын

Never heard of it... I think. Good luck! 👍🏻

@angelobianco73 5 ай бұрын

@@WorldwideDartsit worked!! Sisal looks still natural, not like paint! It's way brighter now, no bleeding! After I added the colour, I waited a few minutes, then I brushed of the segments! I'm very satisfied, got an absolute flawless Board ,now! I keep you updated! If its messed up, I'll build a Table out of it!😂😂😂 I just paid 47 Dollars for it, here in Germany, not 75🙈

@herschelsquirts2338 11 ай бұрын

I yank the sisals out and then take a lighter and burn the left over scragglers.

@kovboyugur5252 11 ай бұрын

Hello , which dartboard do you recommend for heavy darts (36 gram) soft bristle or hard bristle?

@WorldwideDarts 11 ай бұрын

Heavy darts... something firm like the One80 G3 would be perfect. Target Aspar is also a firm board.

@kovboyugur5252 11 ай бұрын

@@WorldwideDarts thank you

@jasoncarter9876 11 ай бұрын

Nice juggling, DJ 😆

@skeller61 11 ай бұрын

With clothes that have this problem, simply shaving with a razor works. I would think that it would work better than fingernail clippers to get the sisal strands cut right at the surface. I recently took up darts after a 30+ year layoff and sprung for a triple core Winmau board, so I hope I don’t have to report the results anytime soon. By the way, any dart that has points that destroy your dartboard would get a flat rejection without further testing from me. Sure, you could repoint them, but there are too many great darts out on the market to deal with this!

@WorldwideDarts 11 ай бұрын

I have one of those shavers for my merino wool socks 😁

@ericpieters8898 11 ай бұрын

It is better to use a cheap shaving scraper. smoother and fast!

@atanasradev9284 3 ай бұрын

I refurbished mine in more easier way. Just burned the sesal with a lighter for cigars. It took me no more than a couple of minutes.

@MrCODPlayer2011 11 ай бұрын

Beau Greaves darts are so f´n beautiful

@FREEPALESTINEFTRTTS 6 ай бұрын

I'm stuck on Step 1 can't hit the bullseye please help

@willabrams9449 11 ай бұрын

I WWD, will you test the Galaxy Jacob Womack darts? Something could be your dart

@WorldwideDarts 11 ай бұрын

Would you settle for the Brad Clause darts? It would cause me physical pain to shell out $70 for the basic Womack darts lol

@ntengv 26 күн бұрын

Just a pencil torch easily wipe out those strands..

@mathewmusladin4556 6 ай бұрын

Would that work on my white hair too!😆

@darttest6926 11 ай бұрын

that's how I've been doing it for years

@anthonynolan945 10 ай бұрын

I love the Irish flag on the board

@TedBarton91 5 ай бұрын

This video feels like a low key flex on how easily you pummel the T20 😂 Seriously though, very helpful. My method is to spray the darts so wildly I never wear out any one particular segment, but each to their own