Refurbishing a simple knife with cow bone handles and shells for pins.
Пікірлер: 116
@markstafford58866 жыл бұрын
I would've tapered the bone handle towards the blade a little. Still nice work
@dabberty6 жыл бұрын
mark Stafford Thanks
@Watcherrye6 жыл бұрын
Keep in mind I am new at this, but exactly how are the bullet hulls used to rivet the handles on? Loves the look but really confused on how it works..
@dabberty6 жыл бұрын
Ron Weasley Hi, at 4.10 you can see i cut off normal pins that go through the handles. I don’t recall which size exactly, but i think they where 4mm. The shells fit exactly over them. It’s just like a cover, the shells have no real function and the knife handle is held together by the pins and glue. Hope this helps.
@Watcherrye6 жыл бұрын
Yeah, it did. Thanks...great video!
@chriselliott17026 жыл бұрын
What was wrong with the blade before the refurbish?
@dabberty6 жыл бұрын
Chris Elliott Norhing, this was 1 of the 10 assignments on the Dutch Bushcraft forum to refurbish an old knife with only used materials. Just for fun.
@bigbill2626 жыл бұрын
Good video but how did you drill the holes in the hard steel after cuttiing the handle off of the original
@borisbarbaris38936 жыл бұрын
bigbill262 можно просверлить обычным сверлом по кафелю
@dabberty6 жыл бұрын
bigbill262 Hi, by drilling very slowly with cooling oil and using a very good drill. The blade itself was only 2mm thick.
@theIndoCurrys6 жыл бұрын
Can use carbide masonry bits etc...Ive had to do that.
@marcojordan89527 жыл бұрын
Like the markings of the original pipe on the outside of the sheath. Nicely done!
@dabberty7 жыл бұрын
Marco Jordan Yep, alleen jammer dat het hier en daar vervaagd is geraakt door het verwarmen.
@codya95684 жыл бұрын
What is the reason for the plastic in between the metal and bone?
@dabberty4 жыл бұрын
It's a liner, it fills any small gaps up and makes it also look a bit nicer
@lisag27715 жыл бұрын
Nice work! What sander do you use?
@dabberty5 жыл бұрын
Lisa G A friend makes these here on snall scale, i bought it from him. It has an 1.1kw engine on it
@lisag27715 жыл бұрын
Thanks for the quick response.
@maximon724 жыл бұрын
I like what you did. How did you avoid the rivets or casings not fracturing the bone?
@dabberty4 жыл бұрын
Thanks! The top of the holes where a little bit counter sunk, so that the edges of the casings have a place to sit. It makes the handle of course not perfect rounded, but hey, this was a small challenge to use only secondhand materials you had laying around.
@cloroxbleach28406 жыл бұрын
Does the cowbone smell bad?
@dabberty6 жыл бұрын
Clorox Bleach Nope
@thomasgodin4023 Жыл бұрын
What bone is it
@dabberty Жыл бұрын
The guy who gave it to me said it was a cow bone, but several people in the comments say it is antler. I have a lot of antler here, and it does not look and feel like the antler I hsve, so I'm not sure what it is anymore..
@royehuckaby3355 жыл бұрын
Great; no music just the shop work sounds!
@dabberty5 жыл бұрын
Roy E Huckaby Agree :-)
@ebel-janschepers37097 жыл бұрын
Thanks for the video. I don't want to be a smart-ass but maybe you have to use gloves when you using epoxy. This is very nasty stuff.
@dabberty7 жыл бұрын
Ebel-Jan Schepers Hoi, waarschijnlijk heb je gelijk, maar zodra ik het afveeg aan een doek met terpentine er in, zijn ze weer goed schoon. Ik had ook eigenlijk gehoorbescherming moeten dragen, en een veiligheids bril, en in een goed geventileerde ruimte moeten doen. Tsja..
@darlenegreenhalgh31262 жыл бұрын
Great job demonstrating this job👍man.I’m gonna try to make one of these.The shells are a cool addition.
@dabberty2 жыл бұрын
Thsnk you !
@BluegrassBushcraft7 жыл бұрын
Awesome. A knife anyone would be proud to carry. Great craftsmanship my friend. Thanks for sharing.
@dabberty7 жыл бұрын
BluegrassBushcraft Thanks
@jakepv16 жыл бұрын
awesome! I just did the same exact thing, a few months ago. only, I used cherry wood.
Dabberty thanks man. you too. good way to improve an old broken kitchen knife :)
@momomohammed91086 жыл бұрын
Good work freind ..thanks
@dabberty6 жыл бұрын
Momo Mohammed Thank you
@TheNolo697 жыл бұрын
Better sape! the hndles look more deer or elk horn than cow bone. Any way it looks great!
@dabberty7 жыл бұрын
Tata Nolo Thanks
@oshaughnessyrof52015 жыл бұрын
Using those shells is actually genius I never would think to do that
@dabberty5 жыл бұрын
OShaughnessy ROF Thanks :-)
@patrickomaracou7268 Жыл бұрын
I`ve been using Winchester shells on my bowie knives handles long time now.good job .
@shinhayata73425 жыл бұрын
I like the shell case rivets
@dabberty5 жыл бұрын
deltadawn(putyourclothesbackon) Thanks !
@gearheartknivesoutdoor21666 жыл бұрын
Very wel done! Why so many dislikes, though..? Geweldig idee, die hulzen! Like!
@dabberty6 жыл бұрын
Gerrit Geerhart Knives & Outdoor Geen idee, en dank je !
@dabberty6 жыл бұрын
Je maakt leuke video’s je hebt er een sub bij nu.
@gearheartknivesoutdoor21666 жыл бұрын
Dabberty, oprecht bedankt!☺
@aldogressa67084 жыл бұрын
show of the ball, he explains, a capsule enters another fixation of the cable. Thankful.
@elsenordeloscuchillos6 жыл бұрын
Ese mango gordo y sin forma la ausencia de guarda,,,, que el filo este alineado con el mango lo hacen muy peligroso...si clavas en algo tus dedos resbalaran sobre la hoja....la belleza sin utilidad es inutilidad.
@dabberty6 жыл бұрын
el señor de los cuchillos Thank you
@juantomasen16015 жыл бұрын
Hay distintas hojas para distintos usos, creo que esa forma es mas orientada al corte y por eso no necesita de tanta protección, como por ejemplo los pukko finlandeses, además si se sujeta con firmeza la misma forma cónica del cabo ofrece algo de protección
@elsenordeloscuchillos5 жыл бұрын
@@juantomasen1601 si pero eso no hace que sea menos peligroso...en una hoja la misma podria hacer una guarda moldeando el recazo bajando el filo por debajo de la linea del filo...(estilo muela jabali x ejemplo)...tambien hay hojas tipo desollador,de carnicero, peletero americano,skinner varios como complemento de un cuchillo mas grande compartiendo funda...estos no lleban guarda pero el mango es ergonomico y nunca cilindrico,...el baile entre lo estetico lo funcional y la historia del como de que y porque esta hecho un cuchillo es al fin y al cabo lo que hacen seguir siendo esa herramienta legendaria.
@sourmash57155 жыл бұрын
wonder why so many people disliked this video?thats a badass knife!i think you did a killer job man.
@dabberty5 жыл бұрын
sour mash No clue but thanks !
@claudio75126 жыл бұрын
Puaj..!! Un asco, un adefesio, un cuchillo sin nanda de fino ni belleza, muy rústico, demuestra que el fabricante es un novato, un cuchillo no solo debe estar bien afilado, también es arte y sentimiento plasmado en el trabajo de fabricación del cuchillo.
@juantomasen16015 жыл бұрын
La belleza es relativa, hay quienes la encuentra en la practicidad, otros en los estético, y otros en crear algo nuevo con sus manos
when you said shells, i thought you meant of the sea variety
@dabberty6 жыл бұрын
sam delapp Nono, the real ones :-)
@thewirescoming Жыл бұрын
Creative but I expected some carving or shaping.
@Ovatione7 жыл бұрын
Stond F1 aan tijdens het lijmen? Leuk om te doen zo op de zondagmiddag
@dabberty7 жыл бұрын
Vincent V het duurde een paar avonden, alleen als de vrouw bezig was en het manneke sliep kon ik er iets mee doen. Tijd is schaars met een klein manneke erbij :-)
@Ovatione7 жыл бұрын
Ja met sherpe dingen en kleine kids gaat niet zo goed. De buurjongetjes willen ook altijd mee kijken. Dat mag maar dan moeten ze blijven zitten waar ik ze neerzet. Het gaat steeds beter. Groetjes!
@jackall35786 жыл бұрын
Amigo desculpe a sinceridade, mas voce precisa melhorar no acabamento, o cabo esta muito ruim. Mas capricha ai que voce consegue.
@bobzoommb86335 жыл бұрын
Jackall 357 kkkkkkk só sendo do Brasil mesmo para criticar o trabalho dos outros... Nossa política nacional eh uma bosta e vc tá preocupado com serviço alheio
@jackall35785 жыл бұрын
@@bobzoommb8633 Sou do Brasil e com muito orgulho fiao...Nao estou criticando no sentido de desvalorizar o trabalho dele e sim com a intençao de ajuda lo a tornar se um bom profissional, pois desenho e fabrico facas taticas. E voce o que faz pra se julgar tao superior amigao?
@bobzoommb86335 жыл бұрын
Jackall 357 faço nada não! Só ZAP ZAP mesmo e me levanto às 10 toooodos os dias... Ô vida difícil!
@bobzoommb86335 жыл бұрын
Jackall 357 ô meu brother não se orgulhe de ser brasileiro não ... Vc eh piada aqui fora
@jackall35785 жыл бұрын
@@bobzoommb8633 Pouco me importa o que voces acham ai fora.
@FordFracture6 жыл бұрын
FAST & DIRTY !
@dabberty6 жыл бұрын
FordFracture Thank you
@hunt4fish7 жыл бұрын
nice...........
@dabberty7 жыл бұрын
hunt4fish thank you
@Trailtraveller7 жыл бұрын
Mooi machientje ! Top gedaan.
@dabberty7 жыл бұрын
Trailtraveller Dank je
@aejazbedarekar10706 жыл бұрын
hello very nice job good
@dabberty6 жыл бұрын
Aejaz bedarekar Thank you
@seerseer94406 жыл бұрын
Great video and inlay idea.
@dabberty6 жыл бұрын
Jerry SEER Thank you
@Veldvaardigheden7 жыл бұрын
Mooi gedaan ! ken bij de verzameling :)
@dabberty7 жыл бұрын
Martin Outdoors Dank je
@FrontierLegacy5 жыл бұрын
Um, that's antler, not cow bone.
@dabberty5 жыл бұрын
Iron Dragon Outdoors Nope, really bone, i had it double checked when i bought it, cause it looks indeed like antler, but it isn’t.
@FrontierLegacy5 жыл бұрын
@@dabberty pithy center, grooves in either end, wrong color and shap for bone. I work with both a lot. Who ever told you that was bobe lied. It is antler. Large white tail or even elk.
@dabberty5 жыл бұрын
Iron Dragon Outdoors aight, thanks for the info. I’ll try to get in contact with the guy again. This would suck.
@FrontierLegacy5 жыл бұрын
@@dabberty I suggest getting acquainted with real cow bone by going to the pet store and getting some.
@FrontierLegacy5 жыл бұрын
@@dabberty That is not to say antler is a bad material. On the contrary, it is one of my favorite for knife handles. It is unfortunate you were lied to concerning the material. And going to a pet supply store to get real bone would be far cheaper any way.
@MrGjenniskens7 жыл бұрын
mooie slijpmachine gekocht Dieter.
@dabberty7 жыл бұрын
gebert jenniskens Yep, dit is hem uiteindelijk geworden, tot nu toevreden er mee :-)
@luisfernandovestena47654 жыл бұрын
mano ,minha opinião ficou horrível
@vlainic7 жыл бұрын
Leuk projectje;)
@dabberty7 жыл бұрын
vlainic Thanks man
@ethanallen70306 жыл бұрын
Badass
@dabberty6 жыл бұрын
Raddish 17 Thanks man !
@CXonthefly2 жыл бұрын
Nice videos but it appears to be antler
@dabberty2 жыл бұрын
Several people mentioned that, so i checked with the guy who gave it to me, but he stays with his claim thats it's cowbone.. I don't know anymore.
@phuocnguyen44125 жыл бұрын
sấu òm
@zachwaddill78016 жыл бұрын
I think the one you're copying was held together with the shells.
@dabberty6 жыл бұрын
Zach Waddill No idea, i was not copying anything. Pure own idea due to a ‘competition’ of several tasks, of which this one was to make a useable bushcraft knife from an old kitchen knife using only used materials. It’s not based on anyones design.