Very nice turntable! Rega makes wonderful tables In December I bought a P3 and have been very happy with it! Enjoy!!
@fidelios_frequency3 ай бұрын
Thanks Dave. Congrats on your purchase as well! ✌🏻
@NickP3333 ай бұрын
Awesome, Arnaldo! So glad you troubleshooted and resolved any issues with your P6. Enjoy your new turntable. That Shure cart is a classic. 🔊😊🎶💜
@fidelios_frequency3 ай бұрын
Thanks for the help Nick in troubleshooting! 🤗 Although most are telling me to switch to MC I’m sticking with my Shure for now! If it’s good enough for Kevin Gray, it should be good enough for me.
@NickP3333 ай бұрын
@@fidelios_frequency Hey, I was in it til that hum went away…😂 As you know, the REGA carts are to take the guesswork out of setup with the 3 screws, but that Shure is a much better cart, imo. I used to have one but gave it to a friend. Still got an M97xE (which Chad uses) and a 91ED that I wired as a mono cart. One deck for stereo, one for mono. We’re obsessive. 😂 Anyway, glad you got everything sorted, cuz during your vid, I was thinking, “this poor guy buys a new table and it gave you grief) lol Talk to ya soon, Arnaldo. 🔊😊🎶💜
@fidelios_frequency3 ай бұрын
@@NickP333I have an M97xE as well but it’s not as precise as the V15V. Sometimes though the V15V is a bit too revealing especially on records that are in bad shape 😂. If I remember correctly Bernie Grundman has the V15V mounted on his lathe as a playback cart.
@sidvicious3129Ай бұрын
This was a great video for current and prospective Rega P6 owners. I had a Rega P3-24 back in the day and liked it. The squeaky sound is normal not just in Rega but other tables as well, such as a VPI Classic that I own. It comes from the belt slipping as it tries to turn and get the platter up to speed. With the talcum powder, you place the whole belt in it which coats the rubber on the belt and this grips to the platter and motor better eliminating the squeal. So yes this is normal with belt driven turntables. What is normally suggested is to turn the plater first, then hit the power button, which will have the belt more in sync with the platter because the belt won’t hav to use as much force to get it up to speed. I also now own two direct drive tables the Technics sl-1200 GR and the Denon DP-3000ne. The Denon is more in line with the build quality and weight of the VPI at 40 pounds. The Technics had this bobble problem when first using the cueing over to lift the stylus off of the record, but it eventually goes away with use, but it drives you nuts and it’s been talked about on KZfaq often. The Denon doesn’t have this issue, nor are the RCA and ground connections located under the table near the tonearm, which causes you to either lift with one hand straining your wrist or propping it up with something like with the Technics. The Denon has none of these issues, neither does the VPI, but the Technics GR is a fine sounding table. The Denon’s feet are huge and they look like the ones on VPI Prime Signature series turntables. The Technics short comings led to me purchasing the Denon and this might be the reason I stop dealing with belt drive tables all together, no maintenance like with the VPI, but I love my VPI and the unipivot tonearm is better with more detail overall, but it can be a headache to set up but the Denon is close.
@fidelios_frequencyАй бұрын
@@sidvicious3129 thank you for your thorough comment. ✌🏻
@EmbryonicRobot3 ай бұрын
Thanks for the video. I am planning to upgrade, but I haven't made any decisions yet. That was a lot of problems to overcome!
@fidelios_frequency3 ай бұрын
Yes a few minor issues that were addressed easily. The buzzing though was a real head-scratcher.
@doodahdavesrecords43193 ай бұрын
Me too Robot Dual Thorens and Technics and the Project A2 are in the running w the P3
@fidelios_frequency3 ай бұрын
@@doodahdavesrecords4319 I had a Technics growing up. My brother still has it 40 yrs later!
@markcarrington85653 ай бұрын
Being from England I have a love of Rega turntables. I even met Roy Gandy at a hi-fi show in February here in the UK. Such a shame you’ve had so many issues. It would indicate that whilst the deck is well designed, a little more care is in order during build. On the lid, all P6s come with a smoked type. When starting my Rega turntable I would always give the platter a small pre-spin by hand. This reduces wear on the motor and belt. I also leave my platter running between records, even on my current Linn turntable. Now it’s working as it should, I have no doubt you’ll get hours of pleasure from it. And despite what others say, I’m glad you can tell the difference between your P6 and your previous turntables.
@fidelios_frequency3 ай бұрын
Hi Mark, I’m hoping to keep this turntable for a while. 🤞🏻 I was under the impression that the white P6 has a clear dust cover. 🤔
@matthewtaylor73553 ай бұрын
If the Rega was made in China u wudnt make excuses for it u would dismiss as crap Chinese Junk
@ballstadt3 ай бұрын
I bought the P6 about a year and a half ago, also from Audio Advice, with the Exact 2 cart pre-installed. I've had zero issues, and really love the table. The spin-up squeak is something I have as well but have been told the same, just the belt rubbing a bit while torquing up speed - I just give it a quick spin with my hand as I'm turning it on to prevent the squeak. Was a great improvement over a couple different ProJect tables I'd had. Last year I upgraded to the Rega Aria Mk3 phono preamp and it was another incredible improvement again. Very pleased with every aspect of the system at this point (which is also using Rega RS5 speakers...a theme....and a Jolida tube integrated amp). Enjoy the Rega! Consider one of their cartridges. They really are designed as a system.
@fidelios_frequency3 ай бұрын
Glad you had no issues. Every system combination has different requirements and challenges. I like my Shure cart too much to change it any time soon. 😊
@ballstadt3 ай бұрын
@@fidelios_frequency That's what matters most!
@Reinvented763 ай бұрын
I lived all the issues along with you lol but am glad you were able to resolve them through research and getting or customer service from the seller.
@fidelios_frequency3 ай бұрын
Thank you for bearing with me through all of my turntable frustrations. 🤗
@AudiophileTommy3 ай бұрын
At this price range it should be absolutely perfect !!!🎉
@fidelios_frequency3 ай бұрын
Does perfection exist? Every turntable setup requires some tinkering, but I agree that the cueing lever drop should have been factory tested and they need a protective film on the dustcover. Thanks for watching.
@Plextortion3 ай бұрын
If I was looking at one of these.......I'd mark it off the list, after hearing all this.
@fidelios_frequency3 ай бұрын
Every turntable setup has its challenges. So many variables come into play when trying to optimize your listening experience. My previous two turntables were not headache-free out of the box.
@bobby6666663 ай бұрын
I have a Rega Planer 3 50th Anniversary Edition since December last year. It was set up by the dealer in my home. It makes a slight noise when starting up. No other issues and I love it. Not up to P6 standard, but closer than the regular P3 as it comes with the PSU, Exact Cartridge and a superior belt.
@fidelios_frequency3 ай бұрын
Congrats on your new TT! Glad you are enjoying it. I think all Rega belts have a little squeak on startup. I was told to give it a nudge before you power on. Thanks for watching. ✌🏻
@eugenefudge368516 күн бұрын
The biggest upgrade you can make to the Rega P6 is a great cartridge like the nagaoka MP 500 and a great phono preamp like the trigon Vanguard III preamp
@Markymarkvinylnut3 ай бұрын
Rega P6 is a game changer! Rega Ania Pro cartridge, and recently added a Michell clamp. Gorgeous!!
@fidelios_frequency3 ай бұрын
Mitchell clamp is my next purchase. I fear my current stabilizer may be too heavy and cause speed fluctuations. ✌🏻
@FleagleSangria3 ай бұрын
Hi Arnaldo👋🏻, Congratulations on the new Rega P6. I have the same turntable. I lucked out and have never had the issues you are speaking of but I do know others have had the buzzing issue. I believe George Borden mentioned his has this issue. His is a P3 however. From what I gather this is definitely a hang up with Regas philosophy. There are many parts of the Rega philosophy I agree with but after having been a Rega guy for many years I have concluded that I get the idea that sometimes the minimalist approach is taken a bit to the extreme. IMO not having a grounding wire is one of those cases. There are reasons why Rega does this but honestly I can’t even recall the technical reasons as to why. Whatever the reason, the buzz would seem to me to be enough of an issue that not having a grounding wire due to supporting whatever other reasons for sound improvement would be a diminishing return type situation. Its awesome they were helpful and came up with a solution but if they are going to have the philosophy of “no ground wire” and then suggest “Yeah try a ground wire” then that is a bit contradictory lol. Here is an idea Rega: How about just realizing that you have hit a proven wall with the grounding issue and put a grounding wire on the turntable instead of placing the task and trouble on your customer? Sorry should have had a rant warning there :0 Anyway, I am happy for you and that you are experiencing a further step in sound quality improvement and ultimately enjoying your new table! Thanks for the video! I am sure it is helpful to others to have this information.
@fidelios_frequency3 ай бұрын
Hi John! I didn’t know you had the same turntable. I agree with your rant but if the issues with the buzzing are isolated then it could be due to other factors in the mix. I’ve heard about issues with the hum but it was mostly due to the proximity of the PSU to the table. But you’re right if the buzzing and hum are easily solved with a grounding wire, then why don’t they just put a damn ground wire in there! What I don’t understand is how they ship dust covers without a protective film! Especially if damaged ones are so common that they already have a form on their website to submit for a replacement. Question for you: do you hear a low hum when the tonearm gets close to the spindle? I would hear it on my Project and still hear it with the P6. I’m wondering if my Shure cart is the culprit. 🤔
@MrLovell19713 ай бұрын
Hello Arnaldo good choice I bought the same Rega P6 around the 2021 I have been very satisfied I have the Exact cartridge I’m definitely going to upgrade my cartridge and phono stage . Before my Rega I had the Project debut carbon Esprit SB . Sorry to hear you had problems. That’s cool Audio Advice was helpful I bought mine from them great company. You have a killer system setup Arnaldo I dig it .
@fidelios_frequency3 ай бұрын
Hi Andrew what a coincidence that we both upgraded to the Rega P6 from the Debut Carbon Esprit SB! And we bought it from the same company! Thanks for the compliments I’m pretty happy with my system right now… until the next upgrade 😂
@false_binary3 ай бұрын
Congrats on you purchase! The p6 plinth and the RB330 arm I am sure are awesome together. I just did the opposite...left Rega (P3 + PSU) for Pro-Ject (X1B) lol. I wanted azimuth / vta controls for exploring cartridges more easily, built in grounding post (dead quiet vs. p3), and mini xlr out vs rca were factors for me. If you are looking for phono pre-amp options, I would highly recommend the Schiit Mani 2 as an excellent entry point (under $200). Such a step up from my Musical Fidelity M5si integrated's phono stage.
@fidelios_frequency3 ай бұрын
Thank you! I forgot to mention I have a phono stage Rega Fono Mini A2D. I believe the way to adjust azimuth in the P3/6 is through the use of shims. I haven’t had the need yet as it seems that the height of my cart is just right. How do you like the X1B?
@false_binary3 ай бұрын
@@fidelios_frequency Awesome! Yes need shims, fortunately many resources out there on many diff carts. I am playing (Japanese) George Michael's Faith right now on the X1B...super dynamic, accurate, and transparent soundstage vs. stock P3 + psu. I went with the Sumiko base cart & added the Wellfleet "oyster" cart upgrade (the Amethyst needs a completely diff headshell) and the psu upgrade. End goal is to move into MC and take full advantage of the xlr balanced out.
@highrantdistrict3 ай бұрын
Cool new turntable, Arnaldo! Sorry you had the various hiccups but looks like you picked a good retailer to purchase from based on the after-sale assistance you got. I haven't had a Rega table but love that they take a different approach to their 'vibration measuring machine' (I think that's what Rega calls it). Minimalism and rigidity rather than weight/mass to keep resonance (?) to a minimum. I like when manufacturers think outside the box. Bottom line: I'm glad you're happy with your new gear, 'cuz that's the bottom line. I hope it serves you well for ages. Cheers, Tom
@fidelios_frequency3 ай бұрын
Hey Tom, thank you for your message. The customer service was awesome and I’m happy I can finally enjoy my turntable.
@NosTubes583 ай бұрын
As someone whom has owned three different Rega TTs, and have since the mid 80s always recommended them to friends as a bare minimum, but I’ll go one deeper and say you move onto either a Denon | Audio Technica | Rega cartridge.
@fidelios_frequency3 ай бұрын
Thanks. What kind of cartridge did you have on your Regas?
@brit19542 ай бұрын
I n Britain were these turntables are manufactured the Rega dealers would never use a courier service, my local dealership set up the turntable in the shop and installed it in my home for no additional cost. I have owned theP6 for about 4 years and have had no problems
@fidelios_frequency2 ай бұрын
I wish I had someone come to my house and set up the turntable for me! Thanks for watching 😊
@fts813 ай бұрын
Pretty cool, Arnaldo!
@fidelios_frequency3 ай бұрын
Thanks for the advice and helping me out with my decision. ✌🏻
@tonymitchell146118 күн бұрын
f a riend had a Rega in early 80's and it squeaked so we pushed the platter gently on start up. Forty years later exactly the same with my P6. Its no big deal its just a Rega thing. great tip on the hum which really bugged me. nevetheless great turntable no regrets.
@fidelios_frequency18 күн бұрын
I have been hearing from many that the squeak is normal for the Rega. Thanks for watching and commenting. ✌🏻
@markdompig50303 ай бұрын
Nice to share your video with us but I’m not sure if I would have made it. I’m from the Netherlands and am a fan of Rega products for more than 20 years. The problems you mention should not occur but like in normal cases a Rega dealer checks the stuff before delivery to a customer. In this case to online service of the seller was good but did he didn’t preventively check and set up the turntable for you. Every production plant has its problems and imagine if for all these problems people would have made video’s . 😄 I also bought a P6 recently and I am impressed with the sound quality. You really don’t have to spend 25k for a good turntable but ofcourse you can! Ps I bought it with an Ania cartridge and can recommend it to (almost) everybody! 😄
@fidelios_frequency3 ай бұрын
Hi Mark! I made the video so that my experience could be useful to someone else. It was not to discouraged anyone from buying a Rega otherwise I wouldn’t have concluded the video saying I was happy with my purchase and enjoyed listening to music on my new P6. I don’t think the retailer has any fault since all they did was ship the box. It is Rega’s fault not knowing how to properly package the dust cover to prevent damage. Rega should have also calibrated the cueing lever at the factory. Luckily both of those issues were easily resolved. Thanks for watching! Take care. ✌🏻
@DavidBurns-sq4kd2 ай бұрын
My new P3 has the squeak, the cueing lever has free play. I also have a loud noise through right speaker when removing tone arm off record. Also my wool mat has the hole off centre so it spins crooked. lol. These little things are frustrating for the cost
@fidelios_frequency2 ай бұрын
Who did you buy it from? Maybe you should contact the retailer or ask for a replacement.
@Kiwizig3 ай бұрын
I am thinking of buying a P6 to replace my Linn Axis which is having speed issues. Your video was very helpful!
@fidelios_frequency3 ай бұрын
Ah Linn… I’ve heard great things about those turntables. Glad my video was helpful. 😊✌🏻
@floydbynoe24443 ай бұрын
The P6 is a significant upgrade over the Linn Axis. I've owned both, go for it.
@Kiwizig3 ай бұрын
@@floydbynoe2444 cheers good to know, but what puts me off the P6 are all the bug's you have to sort out as mentioned in the video
@fidelios_frequency3 ай бұрын
@@floydbynoe2444 thanks for confirming. Lotsa Rega haters out there. 😂
@fidelios_frequency3 ай бұрын
@@Kiwizig the only issue I was really annoyed with was the buzzing. Dust cover and cueing lever were easy fixes. The ticking went away on its own I just needed to give the bearing time to run through.
@timothyfreeseha405628 күн бұрын
Give the platter a little spin before turning on your table. The squeak goes away.
@fidelios_frequency28 күн бұрын
@@timothyfreeseha4056 thanks. Occasionally I remember to do that. 👍🏻
@stephenlegg2623 ай бұрын
I have a p6 with a Goldring 1042 cartridge. A huge improvement over my p3.
@fidelios_frequency3 ай бұрын
Glad to hear your positive feedback on the P6. 😊
@TriAmpHiFi3 ай бұрын
What was the cartridge on the P3?
@stephenlegg2622 ай бұрын
The same Goldring 1042
@wallyallgood3 ай бұрын
i have the same TT Arnaldo, I’ve had it for about 4 years now. I wouldn’t personally put powder in the belt, it only happens on startup and you don’t even think about it after. a while. it often times doesn’t even happen either. regarding the ticking when your dust cover is down, does your cart require a spacer? mine does and i noticed that just with a 2mm spacer, the dust cover sits on the counter weight when it’s down, just barely, but enough to mess with playback! such poor design! making the dust cover like half an inch taller would eliminate that issue when you have to use a spacer. i’ve heard g borden talk about the buzz, and others. he mentioned it only happens with rega carts, but you have a shure so hmmm. i have a hana and have never experienced a hum! but glad you figured it out and also good to know how to address this.
@fidelios_frequency3 ай бұрын
Hi Wally. Glad you enjoy the P6. The ticking was audible regardless of dust cover. It came from the subplatter. Anyway, it went away on its own. I haven’t used the talcum on the belt although the tech said it would be safe. Thanks for watching. 🙏🏻
@6643bear3 ай бұрын
Hi, that’s feasible but don’t have an issue on om5 on my project deck .
@wolfybaby9113 ай бұрын
Nice turntable, Arnaldo !👍👍 , although I’d be a little disappointed to have to play technician with those issues you had to deal with ..
@fidelios_frequency3 ай бұрын
Thanks Wilfredo! 😊✌🏻
@chriskellas29022 ай бұрын
I am surprised Rega didn't put a grounding lug on the power supply, I had noticed from watching another video about the P6 that the chassis grounding wire inside the power supply was connected to the silver screws on the back, but who would have known that??
@fidelios_frequency2 ай бұрын
Yeah, you would think? 🤔
@DarthMaul412 ай бұрын
For that price you could get a Technics SL-1500C. No belt, no squeaks, the wow & flutter is light years away from the belt driven TTs.
@fidelios_frequency2 ай бұрын
Maybe my next one will be a direct drive. 😉
@Kiwizig2 ай бұрын
I ended up buying a P6 and I am very pleased with the sound but just wondering if you were able to get rid of the squeak on start-up? My lid is also scuffed along the top edge.
@fidelios_frequency2 ай бұрын
Squeak is still there. I understand that is a common trait of most Regas. You should ask for a replacement dust cover. Either the retailer or US distributor should be able to assist you.
@robertendsley83123 ай бұрын
I have owned my Planar 6 for two years. Three months ago I had a new Reference Belt installed. Always give your platter a little push upon starting. Said squeak is just the belt breaking in. It will go away.
@paulrogers70673 ай бұрын
Have a p7 with upgraded rb1000 and have demoed it against the p6 and the 6 far short. All in all rega is the brand.
@fidelios_frequency3 ай бұрын
Hi Robert, does the new belt make a difference?
@robertendsley83123 ай бұрын
@@fidelios_frequency a little. I suggest you do what I did. Since the speed on the Neo PSU is set at the factory with the supplied belt. Go with that one for at least two years or when you are ready to change the cart. I had my cart professionally installed. Had the Rega Exact for two years then moved up to the Ania Pro. Tech had one of those "lazers" that shot around the room. With the standard now two year old belt he said my speed was "just about perfect. Right where it should be". With the new Reference Belt he said "even better". But yeah. Don't put any powder on the belt. Just give the platter a spin to start (it will also extend the life of the belt) then hit the "start" button. I assure you the squeak will go away in about three weeks.
@fidelios_frequency3 ай бұрын
@@robertendsley8312 thanks for the tips!
@fidelios_frequency3 ай бұрын
@@paulrogers7067I don’t think they make the P7 any longer.
@doodahdavesrecords43193 ай бұрын
Arnaldo seems like you had a lot of glitches with the P 6 honestly would you recommend it to us who are looking out here?
@fidelios_frequency3 ай бұрын
It depends if you are buying it with one of the optional carts pre-mounted. In that case you may have less issues to troubleshoot. It seems though that the belt squeak is a common trait of the P6 & P3. As for the hum, every turntable setup may encounter that hurdle. I know people that have Regas with no issues whatsoever. It all depends on all your other components. In the end, I am happy with my purchase. 😊
@6643bear3 ай бұрын
Hi ,great interesting video, I have p3 with elyis 2 cartridge, and thus causing the hum when arm go towards end of record, i have a spare om5 cartridge for my project primary e and just temporarily put it arm and the hum went down to low level, so I bought vm95sg and tried that hum practically gone and very low level, my rotel A11 on the phono I/p and to have a reasonable level the vol control have to be in excess 60 -63, so I bought ifi phono amp and use the the next position up from the mm gain switch so more more gain can so you don’t have to put vol control on the a11 right up. so when my elyis wears out I can change it .So with a record cleaning brush wand it need to earth to reduce static I connected the cable to the Neo psu back screw and earth cable to the amp earth terminal but the hum is still there on my elyis2,by the way only noticeable with headphones, couldn’t really hear the hum on loudspeakers , I was hoping that would resolve the issue . Regards mark
@fidelios_frequency3 ай бұрын
I also have a low hum as the tonearm approaches the spindle. I had it also with my Pro-ject as well. I was told that it is expected to a certain degree depending on the cartridge.
@6643bear3 ай бұрын
@@fidelios_frequency , that’s interesting as on my project primary e I didn’t have the hum issue mine has the Om 5 , only on the rega plannar 3 , but confirmed it’s practically gone when I changed the cartridge from elyis2 to vm95e practically gone, . What cartridge is on your project primary e? Regards mark
@fidelios_frequency3 ай бұрын
@@6643bear I had the current Shure V15VMR & also another Shure M97xE. It’s possibly a thing with Shure carts? I’ll try the ProJect with the Ortofon Red.
@6643bear3 ай бұрын
@@fidelios_frequency, hi that’s quite possible but they may not screened on the cartridge as more modern ones . Regards mark
@fidelios_frequency3 ай бұрын
@@6643bear yes I think some carts are better shielded than others.
@Vintageelectronics2296Ай бұрын
In my opinion you should have just upgraded the project I have a Rega and had many issues with mine not as good as everyone thinks for the cost of these units
@budsmoker42011203 ай бұрын
Rega.... what is its wow and flutter? 🤔
@fidelios_frequency3 ай бұрын
I don’t know. I searched but couldn’t find that information.
@budsmoker42011203 ай бұрын
@@fidelios_frequency thanks for the info
@peterstudley18043 ай бұрын
@@fidelios_frequencythey don't publish those figures, I wonder why???
@budsmoker42011203 ай бұрын
@@peterstudley1804 😉
@paulrogers70673 ай бұрын
Move to coil forget bland moving magnets .
@fidelios_frequency3 ай бұрын
Maybe one day.
@larockdigg3 ай бұрын
Hi I ave the REGA p3 and i had the same issue with the hum on my turntable i have a Nagaoka MP-150 Cartridge. My solution was to put a ground wire under the turntable were the middle spindle under the Plinth i have no more hum at all. This must happens on deference types of cartridge
@fidelios_frequency3 ай бұрын
Thanks for sharing your experience. Some people here think they know it all and expect everyone else to be a pro at picking out a turntable which doesn't require any type of adjustment. Thanks for watching!
@eugenefudge368516 күн бұрын
I have a P6 with a Nagaoka MP500 love it with my trigon Vanguard III preamp. The preamp made the biggest improvement.
@fidelios_frequency16 күн бұрын
@@eugenefudge3685thanks for the preamp suggestion ✌🏻
@johnbravo75427 күн бұрын
The joys of owning overpriced overrated British audio equipment.
@fidelios_frequency7 күн бұрын
🤷🏻
@robertbenton28043 ай бұрын
The REGA P6 is a good looking turntable, however it's not without its problems. It sounds like you had your fair share of them. Turntables $500.00 and up in themselves don't really have that much impact on sound unless something is wrong with them such as hum, mechanical, or motor noise. Then they do have an impact, all negative. Your cartridge is nearly 98% of your sound, maybe more. Then you must have it aligned as near perfect as you can get it, it's always a compromise. The one good thing about a REGA is its three point cartridge mounting system, for of course their cartridges, and you are not utilizing that. Anyway I like your honesty, and I subscribed. I do think you would have done much better with a Clearaudio/Marantz turntable probably the same cost, and would have much fewer problems, such as no problems. I've had mine for over seven years with no problems at all.
@fidelios_frequency3 ай бұрын
Hi Robert. Thank you for subscribing. I agree with you about the cartridge and that’s why I stuck with my Shure. I did consider the Clearaudio but the retailer I visited (that didn’t have any floor demos 😂) did not recommend them because they sound “cold”. 🤷🏻 Picking audio components is always trial and error because every combination will sound different from the showroom to your home. Thanks for watching and for commenting.
@LetThereBeSound13 ай бұрын
Another badly misinformed commenter. So turntables $500 and up don't have that much impact on the sound eh? Wow. Just wow.
@longdeАй бұрын
cartridges are 98% of the sound? laughable ill-informed comment. You clearly have not heard what happens when you put a budget cartridge on a top quality turntable with top quality tonearm.
@user-dh2te2cm2d3 ай бұрын
i have a p6 1400euro, not the best, but it can be worse
@fidelios_frequency3 ай бұрын
Sorry to hear about that. What cart do you have mounted?
@user-dh2te2cm2d3 ай бұрын
i think it's strange they know about the problems, but don't do something about it......i am not happy since i have to unpack my p6
@fidelios_frequency3 ай бұрын
🤞🏻Hope you don’t have any issues with the deck.
@jimbrock14413 ай бұрын
I would hardly call these upgrades. I would call them setup and maintenance procedures. Rega sells tonearm shims because their carts are typically 3mm shorter in height than other brands. That is why Ortofon came out with a Rega sized MM cartridge. Of course a belt will slip on startup as it is not direct gear driven. Give the platter a nudge before hitting the power button or your belt will stretch or pull off the subplatter. Regular oiling of the bearing is necessary for any turntable even ones that have been sitting in storage or on a dealer's shelf. My daughter figured this out on her own when I gave her my old P25. The ground issue affects all types of electronics of differing ground potentials when items are a mix. Now we have people thinking that these tables are troublesome like people who don't read owner's manuals and complain about their purchase.
@fidelios_frequency3 ай бұрын
When I said "upgrade" I meant from my previous turntable. I thought it was pretty clear from the video. Maybe I can reach out to your daughter next time I need gear troubleshooting. BTW, my previous Pro-ject was belt drive and I never heard squeak or ticking. Never had to "oil" the bearings. I'm just sharing my experience.
@jimbrock14413 ай бұрын
At least my daughter knows that experience without understanding is useless. At least my daughter knows that the advantages of a belt drive turntable are defeated if the belt is stiff enough not to slip. Rega P8 and P10 have two belts. The Niaia has three belts. More money solves more problems. You are paying for a good arm and speed control at a price point. If you buy a turntable without adjustable VTA then you have to make adjustments when installing a non Rega cartridge. You can't just install a cartridge and hope that it works. There are other makes for that. Lubrication is self-explanatory. I do not consider Rega to be the best turntable out there. It is a collection of compromises to sell at a certain price. It has the bones to be a good turntable. If your Project did not exhibit these issues then why did you replace it? Fini.
@fidelios_frequency3 ай бұрын
@@jimbrock1441 Man, you really need to listen to videos. I explained why I replaced my Pro-ject. Your arrogance just makes you deaf. For you daughter I have this: 🏅🏆 I bet you're a proud father!
@CJNooberson3 ай бұрын
@@jimbrock1441are you ok?
@markpattinson46273 ай бұрын
Perhaps you should have bought a P3 Anniversary Edition. Just as good as the STD P6.
@fidelios_frequency3 ай бұрын
I was told that the quality jump from P3 to P6 was significant. 🤷🏻
@mhagain3 ай бұрын
Well no, it's not - the P6 has a much better platter and plinth, and the power-supply is hand-tuned to it's motor, for starters.
@fidelios_frequency3 ай бұрын
@@mhagaincorrect, thanks for the details. 👍🏻
@mazzysmusic3 ай бұрын
The P6 is the sweet spot in the Rega line it is a fantastic table. So much better than the P3. Better platter, sub platter, and power supply. Surprised you didn’t need a spacer using a non Rega Cart. Now save up for their Exact 2 cartridge. It is the perfect fit and sounds wonderful on any of their tables. Nice journey. Enjoy the table. ❤️🔥
@fidelios_frequency3 ай бұрын
@@mazzysmusic Thanks Mazzy! I’m actually investigating the need for a shim. It’s a challenge to find the height specs of my Shure cart but it doesn’t seem to be taller than the Regas. Or if it is, it might just be 1-2mm. Tonearm seems to rest parallel to record. To be continued…✌🏻
@davidthom71273 ай бұрын
🤣 I really think you need a 21st century cartridge
@fidelios_frequency3 ай бұрын
Have you ever listened to a Shure V15VMR? Maybe you don’t know, but Bernie Grundman has it mounted as a playback cart on his cutting lathe. Kevin Gray has it on his home system. Maybe you should educate yourself before you crack jokes.
@TriAmpHiFi3 ай бұрын
Ya gotta' say why David.
@fidelios_frequency3 ай бұрын
@@TriAmpHiFi he won’t because he has no comeback line. I think my response was enough to show how misinformed he is.
@pennfootball713 ай бұрын
With rega you need a p10 before it gets hifi everything else is kind of middle stuff
@fidelios_frequency3 ай бұрын
No point for me to get a P10 with all the other components staying the same.
@jimsregaturntableshifijukebox3 ай бұрын
@@fidelios_frequency well said👍
@pennfootball713 ай бұрын
I had a Rega P6 it was the worst sounding thing I ever owned. I added a mofi cart that saved it and made it listenable and a 2mm plate to level it. The stock MM cart was horrible horrible. I moved on since my midfi journey. You will get to better gear eventually. It is a journey not a destination. Look at Kuzma next.
@fidelios_frequency3 ай бұрын
Thanks for the advice but I’ll stick with what I have for now. ✌🏻
@mikemcguinness13043 ай бұрын
You're talking shit
@fidelios_frequency3 ай бұрын
@@mikemcguinness1304 I know you’re not directing that comment at me.🙅🏻♂️
@gojdartamas343 ай бұрын
Stay away from Rega, try a Technics sl1200 especially together Shure , it’s much better…
@davidthom71273 ай бұрын
🤣
@fidelios_frequency3 ай бұрын
What is your recommendation based on? I had a Technics 1500 in the 80s w/Shure cart and it’s a really good turntable. A real workhorse that my brother still has to this day, it has some issues though.
@gojdartamas343 ай бұрын
@@fidelios_frequency SL1200ot 1210 M3D , you can turn off the pitch controll, second han is very affordable. If You find one need some service check , to recalibrate. I belive the Shure V 15 good for the arm. Amazing turtable, don’t do any tunning. Only find original mk2 rubbel slipmat, it,s bettery M3D rubberslipmat is slimmer. Easy VTA settings. I replace my Linn Somdek to a M3D. Real music lover’s turtable. Bring closer the music…
@matthewtaylor73553 ай бұрын
My Technics GR has considerably more weight than my Gyrodeck... I also have a Sl5 1210..and only 5 other decks
@fidelios_frequency3 ай бұрын
@@matthewtaylor7355 Rega’s whole philosophy is less weight absorbs less vibration, hence better reproduction of sound. ✌🏻
@pennfootball713 ай бұрын
I tell people if you don't have 25-50k stay away from turntables..It is just so much of a nightmare under 25k.
@fidelios_frequency3 ай бұрын
Glad you can afford to spend $50k on a turntable. 👍🏻
@pennfootball713 ай бұрын
@@fidelios_frequency nah I got a 22k DAC instead a Weiss Helios. It is sooo goood! I use Rockport Atria II speakers and Burmester 911 amp and 088 preamp
@jdekong39453 ай бұрын
Oh BS 😹
@AnkoMark3 ай бұрын
So you don't have a turntable.
@fidelios_frequency3 ай бұрын
@@AnkoMark 😂
@ilikeguitar99Ай бұрын
@fidelios_frequency just out of curiosity, was the NYC shop you mentioned In Living Sound? Also considering a P6 and was thinking of visiting that spot as they carry rega but heard similar feedback as yours re: the clientele, customer service etc.
@fidelios_frequencyАй бұрын
It was not In Living Sound. I heard someone that did buy from them had a good experience. The NYC shop I was talking about is Park Ave Audio.
@ilikeguitar99Ай бұрын
@@fidelios_frequency Thanks very much for the quick reply, good to know