TOSHIBA P775 take apart video, disassemble, how to open disassembly

No video

TOSHIBA P775 take apart video, disassemble, how to open disassembly

Рет қаралды 41,427

Күн бұрын

Hi!
No music. No talking. Just work.
If you are taking your TOSHIBA P775 laptop apart be careful and wear an anti-static wrist band or use other anti-static device. If you need to change a LCD usually you don't have to take screen out of a laptop. You can leave it on a laptop and watch the last part of the video where I am taking LCD apart. If you need to change a keyboard, you don't have to take all bottom screws out. There are usually some marks, like a keyboard picture, on a case bottom. If you need to put a laptop back to work be aware of screws. They are different and you better remember or mark them somehow to insure that you will put them back in to a right place.
Some laptops I take apart first time, so don't be serious on my time and performance.
If something got broken - ooops, it's your fault.
Believe me, some parts in your laptop are already broken, you just don't see that.
This video is like insurance for your laptop. With this video and some skills you will be always sure that at least you can try to repair your laptop. If it's broken you don't have to sell it or throw it away. You can find some new or used parts somewhere and change it. It maybe will be your new job or hobby. And if it didn't worked out you still will be able to ask somebody else to fix it.
So, just watch this video and fix your laptop.
Have fun and good luck!!
regazzz #recycling #recycle #upcycling #zerowaste #sustainability #reuse #environment
#handmade #waste #sustainable #diy #vintage #recycled #demolition #upcycle #design #scrap #repair #disassembly #Technology

Пікірлер: 70

@Orion13622 9 жыл бұрын

I've been an IT Consultant for over 20 years now, and have worked on my share of notebook PC's, and I have to say you NEVER use a power drill to unscrew the screws, unless you are just plain careless and don't give a shit about your customer's hardware. Seriously people, this is an example of what NOT to do do your clients PC... there are right tools for disconnecting the tabs along the case as well.... (cringe each time I hear the drill grind....) and how you just toss the parts onto your table... and with no protective cloth to keep from scratching the case (no matter how soft you claim your desktop is)... totally unprofessional....

@xxtriplex95 5 жыл бұрын

thank you so much. worked like a charm, and yes you have to dissasemble the hole thing to get the cooler out. Also there are some blue hard tipped cables that you have to manually pull down and some White cornered cables you must pull in the direction of the cable to release. Overall a hard process but I did it and put it back was easyer. works like a charm no mroe overheat and no tractor noises!

@regazzz 5 жыл бұрын

Great job! To anyone who is "crying" about re-assembly video, I know it would be better to have it, but on the other hand, @kenzo95 is a perfect example that it is NOT needed. Thank you!

@Lord_Giygas Жыл бұрын

@@regazzz You mean to tell me I have to pay attention and repeat the steps backwards on my own????? How can you be so heartless lol XD

@regazzz Жыл бұрын

@@Lord_Giygas if you take a reassemble video, I will link it in the description :-) Otherwise, please pay attention to all screws and where the cables go. Take a few pictures, notes, etc. You will be good! 👍

@rhynole7778 9 жыл бұрын

Thank you! Thank you! Thank you! Mine started shutting down randomly and was not overheating. tried running it with a fan pointed directly at it to see if it was overheating. Still shut down and was not hot. I suspected the fan. This video took all the guesswork out of taking it apart. Found a big clump of years worth of dust trapped between the fan and the exhaust opening. fan was unable to move. Cleaned, reassembled, good as new!

@efeozturk5253 3 жыл бұрын

the only video that shows how to fully disassemble a p755. now I need to find one that puts pieces together lol

@bilginbey1968 9 ай бұрын

paylaşımı tersten ise belki yolu bulursun

@easaahmed9736 8 жыл бұрын

Thanks so much for this video and no music to distract. I was able to disassemble and replace the heat transfer paste on my laptop processor. Laptop is running as new now. Thanks to your video! much appreciated.

@zovla 9 жыл бұрын

Thank you on great instruction video. You are fast and furious on dissemble. Have to pause couple time. Great work. Keep it going!

@inconspicuous-nobody 4 жыл бұрын

Anyone know which old Toshiba laptop I can steal the 2nd HDD assembly from to put it in my trusty p775, a beast that will fall apart a million times but never die? (Also, love the vid, it's like my 7th time using it)

@regazzz 4 жыл бұрын

Hey, thank you! I hope it will always work!

@deusignis7582 4 жыл бұрын

i took mine apart just to the point where i could clean the fan now the monitor doesnt work

@FrederSnorlax 5 жыл бұрын

Thanks bro. Excellent vid.

@regazzz 11 жыл бұрын

Yep, it is!

@regazzz 11 жыл бұрын

Yes, it is integrated, sorry about that!

@JeffBrazier836 9 жыл бұрын

Thank you.

@robis1020 8 жыл бұрын

I'm trying to change the fan. do I have to take out the keyboard to do it? or can I just unscrew all the bottom screws and pop the case off like that?

@archangel20031 8 жыл бұрын

You should tell us (voice over?) what to components are as you remove them. I need the LAN and headphone plugs replaced as well as the keyboard.

@regazzz 8 жыл бұрын

+archangel20031 I understand that you need some explanation what is what and so on. First thing first and LAN Ethernet jack is sitting on the motherboard and to change it you will need to desolder it and solder a new one back. If you can do that, you probably would not ask what it is and where it is. With Audio Jack is it is a good news. Because you can replace a board that is can be found on eBay. Type in Toshiba P775 Audio Jack and voila, you will find some for sure. Any other parts, if you need explanations what is what - watch a video I made about all laptop parts kzfaq.info/get/bejne/q9OojcKf1uDcfp8.html

@archangel20031 8 жыл бұрын

+regazzz OK, a year looking for the head set plug part and now I know what to call it and found it. Thank you, and I will check out the other video. And if there is something I don't think I can handle, I'll have the son-in-law help.

@regazzz 8 жыл бұрын

+archangel20031 a few useful things you can do to make this process as painless as possible. 1)before removing screws get A4 paper and sign all screw holes. When you will remove a screw you will know for sure where it came from. 2) be very gentle with all connectors. 3) although you got videos from KZfaq, don't hesitate to take as many pictures as possible, for example a picture of how exactly some cables are placed, because sometimes it is impossible to remember if all. Have fun fixing your laptop.

@Atari5732 5 жыл бұрын

It's a good thing you have your swiss army knife there...

@xLABClanx 11 жыл бұрын

So do I have to buy a completely new motherboard if I want a new graphics card? If so, may just build a desktop...

@juancarlosbrizrodero2495 11 жыл бұрын

Very good friend, but you always have to remove it very fast. thanks

@regazzz 11 жыл бұрын

Desktop will be a different story :) It is up to you.

@akramhussain8222 4 жыл бұрын

I have like this laptop i want speaker like its

@Maurizeth 9 жыл бұрын

Gracias por tu video, me ah ayudado de mucho pude lograr arreglar mi laptop por mi misma.

@regazzz 9 жыл бұрын

Maurizeth Gracias amiga!

@escortrobpeople2031 9 жыл бұрын

awesome!!!!! any other post for the same labtop is amateur compare to you

@regazzz 11 жыл бұрын

Thanks!

@S_Allyson_Amaral 4 жыл бұрын

brother i'm not finding this laptop's webcam drive anywhere helps me

@lindapetrus5683 10 жыл бұрын

Could you tell me where the CMOS battery is located on the Satelitte P775? I wasn't able to see it on your video. My laptop won't boot up, or stay on when I do get it to boot up, so I thought I'd try changing the CMOS battery. Thank you, Linda

@regazzz 10 жыл бұрын

Hello, you need to flip this motherboard to be able to get to a CMOS.

@johngalt1961 9 жыл бұрын

The part you remove at about 18 seconds (the hard drive?) seems to slide right out. Mine is stuck and won't budge...?

@regazzz 9 жыл бұрын

johngalt1961 Hello, I would use something like a little flat screwdriver in order to push it a bit out. Make sure there is no screw holding hdd caddy. (who knows, maybe this laptop had different caddy)

@johngalt1961 9 жыл бұрын

Thanks.

@barisgecer 10 жыл бұрын

Hi, Which one is for wireless. I have cleaned my laptop and now wireless does not work. I would appreciate if you could help.

@regazzz 10 жыл бұрын

hello, at 2.40, I am unscrewing a wifi card and this is where you should check for wires to be connected.

@barisgecer 10 жыл бұрын

Thank you! I have checked, removed the card and connected again but still not working. Probably I broke it. Thank you anyway.

@regazzz 10 жыл бұрын

It is kinda hard to break, was it working before?

@Murdoch493 8 жыл бұрын

that's a P775? I have a P775 and the cover for the HDD and Memory are seperated

@regazzz 8 жыл бұрын

this is for sure a P775. Here how you can make sure - simply check on eBay for P775 Case bottom (used item) and they will be exactly as a case bottom of a laptop in this video.

@rwdplz1 7 жыл бұрын

Is there a way to add a second hard drive to that second empty hard drive bay?

@martydevinney6822 6 жыл бұрын

Did you every find out? I'm wondering this myself.

@MrQuickFX 6 жыл бұрын

Yeah, you need to add SATA port extension, my wife is using SSD and orig. HDD. Check K000122700 part.

@MrEzzhtm 3 ай бұрын

@@MrQuickFX Can you explain this to me in a simple way because I want to do this?

@MrQuickFX 3 ай бұрын

@@MrEzzhtmYou need an additional module that allows 2nd hdd to be connected. Search Google for this, it will give a general idea: "Toshiba original circuit board (for 2nd HDD/SSD) - K000122700". Connect the ribbon, fix it in place with screws and connect another Hdd.

@bilginbey1968 9 ай бұрын

subtitle with some why and how to do wouldn't be bad...

@regazzz 8 ай бұрын

Agree, but can't afford it. I hope this video was a bit helpful. Thank you for watching!

@Rikesh_Mistry 9 жыл бұрын

Hey Guys, Can somebody help me, my laptop randomly stopped working yesterday, I really need Recovery Media files to help restore my laptop. Unfortunately I have found out this information to late. Your help will be greatly appreciated! Many thanks, Rikesh

@regazzz 9 жыл бұрын

Rikesh Mistry I wouldn't worry about files that are on the hard drive unless hard drive is dead. There are a few easy methods to get your files from the hard drive when laptop is not turning on.

@P0RC0GUES 3 жыл бұрын

HUGO PORTUGUES EM SERVICO

@ashir555 10 жыл бұрын

If that laptop wasn't dead, after seen how you handle it, I'm sure now it is...

@regazzz 10 жыл бұрын

O c'mon, being in this business for some time and can't tell I am breaking something to death.

@ashir555 10 жыл бұрын

regazzz When you disassamble a lap like this you need to put a felt cloth on the table so the lap don't get scratches. Minus for you. And those screws, you can hear how you erase the cross on them by not stopping the screwdriver. Another minus. And let's NOT talk about using a knife to separate plastic clamps...

@regazzz 10 жыл бұрын

Look, my table is pretty soft, it does not make lot's of scratches. On some very fine laptops I use additionally some material. So, no minus here I guess. While unscrewing this not stopping this drill not a problem. Maybe scratch a screws a little, but not erase a cross. If you want to erase - you should screw it back and keep rotate a bit, than it will be erased. So, I am guessing I am getting a little minus over here, but not a big one :))))) My knife is not a knife, it is not sharp at all and very thin. On the other hand it is better than a flat screw driver and last match longer than all type of plastic tools I tried. Anyway, thanks for detailed review :) Happy New Year!

@John-B69692 Жыл бұрын

Like a butcher taking apart a side of beef. Jeez...

@regazzz Жыл бұрын

One pound of Toshiba Steak please... :-)

@John-B69692 Жыл бұрын

@@regazzz You don't have one of those you want to sell do you? Mine just bit the dust.

@regazzz Жыл бұрын

@@John-B69692 No, that was long time ago. But eBay is a good source to find parts!

@John-B69692 Жыл бұрын

@@regazzz Yeah I just looked at eBay too... I need a new board with the HDMI & USB ports. The Toshiba p774-s7100 is a freaking workhorse. Had it for about 10 years. The damn thing disintegrated when I took it apart.. all the ribbons came apart and broke. All over the HDMI port taking a crap and not recognizing my tvs. Hard drive fan heat sink processor screen are all good but they can't be connected to a new board because all the ribbons self destructed. I can't even get a new motherboard for it because the ribbons won't hook up to it. So now I'm looking for a used p775-s7100 that will accept that hard drive without new OS installation.. wheee... fun. Looks like I'm going to have to get a new one and set it all back up again. Thanks for the chat. Great video...