Thanks very much...Very useful...I have a small bathroom floor grout repair job to do and now know what to do. Cheers!

How can I clean my grout? I have white grout and grey tile. I have tried the expensive Aqua Mix brand heavy duty grout cleaner and it didnt work. I also tried baking soda and Four Moms cleaning vinegar, which seemed to work better. Any advice is appreciated very much

Why would you use a carbide blade for cutting metal? They make an attachment for removing grout with a diamond edge. And you run it on high. Works much better. Also you need to vacuum it before grouting and vacuum as you cut the grout out so you don't fill the house with dust.

You need to vacume the joints prior grouting . The new grout will not stick to The dust and debre from multi tool.

This video was incredibly useful. Yes i am lucky enough to have a multi tool but never thought to use it for removing the old grout. I had to buy a float which was only a couple of pounds and the grout of course. I vacuumed out the joints once finished before doing the grout. I am a lady of mature years who has never done this before. I literally did my repairs in an hour and am very proud of my accomplishment. It took another hour to clean up the excess grout though, I would caution leaving it for 20 minutes!!!

Can be done...Need a good steady hand...What if the blade hits the tile (corners and edges)...Small areas like under 100 square feet controllable...

Does the process change when the grout is lining like a bath tub? Or do you have tips on that

Really appreciate this video, never imagined using the tool we at work call the "Jigglo" to work this way

Should I use white grout in a bathroom? I think the staining will be a problem?

Question: the tile that's been in the house for the last 50 the grout doesn't crack or chip off ever.. HOWEVER someone install some tile in my house last year and it's cracking already. The floor got wet and it really cracking down. Why is 50 years old grout not cracking at all and 1 year old grout cracking fast?

And you mixed the grout when you finish to take everything out

Good thing I watched this video. Wouldn't have guessed I shouldn't damage the tiles.

Nice job!! I want to know the name of the grout you used. I installed some grout three months ago, which already came off.

How many people will cut through the water proofing with the multi tool?

What if it is a project to change grout color, not so much damage, from dark to light?

Can you do it with a 1,000 square. And no complaints with the customer?

Fixing the floor I am happy I Love Your video

Well done guys.

wait, so new grout takes 20min to set? i wouldn't trust myself, i'd have to get the old grout out even before mixing the new stuff up. good video though, giving me the courage to get up and do it.

That grout application with the fingers is a new technique I wasn’t aware of 🤔🧐

My tile is already out how do I reinstall it?

You dont show how to get the excess dirt and grout before applying the new grout ?

The half circle attachment is faster and better than this cutting attachment you are using, for this particular job. Also, need to vacuum before re-grouting and use diagonal passes with the grout paste in order to get it in properly.

Great vid guys, thanks!!

Thanks for the video this is helpful. Does the new grout need to be sealed?

Good job.

It’s a nice consistency dammit and what is that consistentency !

Do you need to use a sealer on top of the grout? I have to redo almost my entire powder room. The individual who did it prior used a sealer after the grout dried. Perhaps it was a different type of grout..

Login Rob - are you saying can use earlier than 24 to 48 hours.

Need these tools from where we can get

Less than $20 in supplies lol. Yeah bc every home owner has a multi tool w/ carbide bit and tile float lying around.

How do I regrout bathroom floor if I only have 1 bathroom to use. Can’t do without for 2 days?

Must you get every bit of the old grout out before regrouting? Mine is about 1/2 inch wide.

Neat work✨

Did you repair grouting of entire bathroom floor or just those two tiles in that one hour?

Won't this chip the edge of the tile

Where can i buy a multi tool for 20 bucks yo?

not all grout is the same size..is that tools supply few size

where do you get the multi-tool you used to remove the grout?

Why not usr a vacum to get the old grout out after it was sanded lol

I want to this cutter machine please brand no of machine

What tool is he using? What's it called? Any link to purchase would help

Yep, they make everything look so easy.

Wht is the size of spacer

your are using the wrong blade and after you removed that grout you need to vacuum that area to get all the dust out then use a sponge with water to clean all surface dust in the joins to make good grout contact.

Love this

An hour of work for a 12" line lol

yeah if you have to redo a whole kitchen not just 4 little spots in a bathroom it’ll be quite a bit longer than an hour also that bit is about 30$

I need an idea for water leaking through wall inside house in an 4 floors apartment of first floor can any one give idea

doing this by a hand tool is better and just as easy. If your store does not have one, you can use this one without the batteries.

i can see that using that little tool its jumping all over the place not removing the old grout likes one would like and you can see it can break or damaged the tiles not to mention the time oh my gosh the time it would take to remove the old grout

Don't mix grout until you're ready to use it. This video is ridiculously poor.

What is the brand of that tool and attachment?

I saw pin holes now perfect

where sale mechine?

Do you seal the grout after it dries?

Nice job!

Why not use hydrochloric acid to remove the grout?

This tool work for natural stone tile only. Other tile with top glazing will cheep out the edges.

great thanks

NYC grout remover

A multi tool is >$20; its not a supply but makes a big difference

a) Wrong carbide blade for the job. b) Blade is in line with the tool which makes it more difficult to control in this situation. Should have turned the blade 90 or so degrees to the tool body.

@ 3:58 is that BEFORE or AFTER? ...... If AFTER, I DISAGREE with, "...the area that we patched looks pretty flawless and I'm really happy with how the color came out" ...looks like you need to try again.

Giá bao nhiêu vậy shop bán tại Việt nam

Star Lord in the intro?

That so good

Wouldn’t you address the cause of the cracked grout (loose tile) before replacing the grout?

Am looking for this job is live in do

They removed all the grout while waiting for the new grout to set up after mixing it. I wish I could get demo done that quickly! I'm calling bullshit ok n that btw.

Who mixes grout before the old is removed NOT

I just brushed on pool chlorine on dirty grout. Next day grout looks like a new one. No need to remove...

Less than $20 not including $200 grout removal tool 🤦‍♂️

These guys are hacks who the hell wears gloves when they grout and why would you need an electric tool to take it out when you could use a 5 in 1.

You can easy damage tile with this tool if joints are small.

Wow, this is all wrong. Never use a multi-tool on grout joints that narrow. Non sanded grout will come out easily using a regular grout removal tool without the risk to your tile.

Ok tom lets put the grout in Oh damn the grouts set in the bucket

I would use the half disk instead of the blade

اريد الشراء

Wrong blade for the job..

É uma dessa que eu estou precisando

In Italia non so fa così lo stucco vidio sbagliato io che lo faccio da anni

Should've replaced all the grout in that bathroom since it's not that big to begin with and guarantee color match. The existing grout will probably fail sooner or later anyway since it was probably improperly packed and the grout wasn't mixed properly

Tried the blade on my multi tool and now it looks like a super toddler has been chewing on my tiles. Send help 😅

Always hoover up the dust in the grout space before putting the new grout in.

There is a tool which is a lot better, or an attachment to the vibrating tool. You will not damage the tile with the circular tool.

Dios le bendiga y y sus peticiones se les cumplan a cada uno en el nombres de Jesús.

ok so you mixed 5 pounds of grout and used 3 oz of it

Anyone with grout starting to deteriorate needs to watch this video . . . NOW!!! Thanks for sharing.

No way to use dremel for most type of ceramic tile - very easy to chip off a glazed edge.

For easy u can use the grinder withvlow speed

Just put new grout over the top and job done!

After watching this I’ll hire someone 😳

Wrong blade for Grout you need the demon blade

3:58 that's the finished job? That looks terrible

san bruno, california (LOL)

Isso eu Fasso com um serrote

1/2 a pail of grout for 12" of tile....

An hour of work and he fixed one tile

Most bathroom groutlines are tiny