Regulator rectifier failure - MOSFET Upgrade - Honda CBR1100XX Blackbird 96 97 98 Carb Models

Рет қаралды 12,773

3 жыл бұрын

**This video is based on a 98 carb model, FI models are a little different and you will need to make an adapter plate.**
The reg/rec is one of the most common failures on the Honda Blackbird. In this video I swap the unreliable old unit for a Shindengen FH020AA FH012AA MOSFET version and talk about the reasons why the original units are so unreliable.
This video is based on a 98 carb model, FI models are a little different and you will need to make an adapter plate.
The correct mating connectors are:
www.rexs-speedshop.com/produc...
www.rexs-speedshop.com/produc...
www.motosera.com
Original music by Sophie Neale
This Girl's Biking Adventure Merch here: teespring.com/stores/motosera...
My Vlogging Gear: Helmet Camera GoPro Hero8 Black - gopro.com/en/gb/shop/cameras/...
Dash Camera GoPro Hero7 Black Mic
Adapter - GoPro Pro 3.5mm Mic Adapter - gopro.com/en/gb/shop/accessor...
Microphone - Interphone ProSound www.interphone.com/en-gb/Inte...
My Protective Gear: Jackets - RST GT Textile - www.rst-moto.com/rst-gt-ce-te...
Trousers - Revit Neptune Goretex - www.revitsport.com/en/trouser...
Leggings - Motogirl Ribbed Knee - motogirl.co.uk/collections/le...
Helmet - Shoei RYD (RF-SR) - www.shoei.com/worldwide/en/he...
Other bits: Intercom - Interphone Tour - www.interphone.com/en-gb/Inte...
Phone Mount - Quadlock Ram Mount - www.quadlockcase.co.uk/produc...
USB Charger - www.quadlockcase.co.uk/produc...
Want to send me something?
Unit 50231,
PO Box 6945,
London,
W1A 6US
#regrec #blackbird #MOSFET

Пікірлер: 102

@Onei1y Жыл бұрын

Superb explanation with great details. Excellent Job 👍🏻

@LocalHero10 2 жыл бұрын

Absolutely great video. Very educational. Thanks a lot!

@MotoSera 2 жыл бұрын

Glad it was helpful!

@allun13 3 жыл бұрын

Very nicely done. Thank You. Love these "how I do it" vids.

@MotoSera 3 жыл бұрын

Thanks! Pleased you found it interesting 😀

@allun13 3 жыл бұрын

@@MotoSera did you do an update on your elsemade seat? I'm looking to ride up and have mine re-done. Stay safe and Well.

@byjingobob 3 жыл бұрын

Hi Sera, great video, expertly presented.

@MotoSera 3 жыл бұрын

Thank you so much 🙂

@gerrymcerlean8432 2 жыл бұрын

I'm going to replace the reg/rect on my VFR800 before it fails. Now I know how to do it, thanks to you.

@MotoSera 2 жыл бұрын

You're welcome and thanks for watching!

@kostasdimakop1391 3 жыл бұрын

Very useful video. Thanks . I have a cbr 1100xx model 1998 and I have done 53000 kilometers without any problem. The only thing I can mention is that when the motorcycle is parked, the battery does not hold its energy for many days. There must be a very small power outage somewhere. Maybe it's from the dust that can exist after so many years in some connections. For this reason every time I park the motorcycle for more than a day, I disconnect the negative terminal of the battery. I usually need a new battery every 2.5 years. Always be well and have good trips. Greetings from GREECE !

@MotoSera 3 жыл бұрын

You're welcome. Try disconnecting the battery and put a meter, set to show amps, between the negative cable and the neg terminal on the battery and see what current you have. On a carb bike it should basically be zero. From there you can start disconnecting things one at a time, or pull fuses and try and narrow it down. Do you have an alarm/immobiliser fitted?

@kostasdimakop1391 3 жыл бұрын

@@MotoSera No i dont . I 'll try to do the test . Thanks !

@chuckb470 9 ай бұрын

Saved to watch later! I knew they had this issue. Not sure if mine was done yet or not. Going to try snd find out.

@charlesgilroy4563 2 жыл бұрын

Great video very easy to follow.

@MotoSera 2 жыл бұрын

Glad it was helpful! Thanks for watching!

@liamwinsabutton Жыл бұрын

Thank you for this ☺️

@flokser021 3 жыл бұрын

This is upgrade , fine . So good Pyramid rear huger ( Carbon or not ) ,a very useful addition to the BB that preserves the rear mono shock absorber and prolongs its life , also the lower sleeves of the Pro Link lever.

@MotoSera 3 жыл бұрын

Totally agree! Thanks for watching!

@gregstone4835 3 жыл бұрын

Very clearly presented. Thanks.

@MotoSera 3 жыл бұрын

You're welcome, thank you for watching! 😊

@robertt65250 3 жыл бұрын

very good. straight forward fix for the bird

@MotoSera 3 жыл бұрын

Yes, its easy and well worth doing. Later bikes you need to angle it a bit differently and drill some holes, but not much harder. Thanks for watching :)

@svetlioenchev8039 Жыл бұрын

Great video my friend ! Take care and be safe !

@MotoSera Жыл бұрын

Thanks, you too!

@carnellbaker3970 Жыл бұрын

1997 CBR XX THANK YOU SO MUCH

@dufferduffer7421 2 жыл бұрын

Great video thank you.

@MotoSera 2 жыл бұрын

Glad you liked it!

@denisrailey777 3 жыл бұрын

Like your wiring skill.

@MotoSera 3 жыл бұрын

Thank you for watching :)

@carlosjuarez4861 Жыл бұрын

Arregle la falla de corriente gracias a Tu vídeo muchas gracias 👍

@andrewturner864 3 жыл бұрын

Hi Sera, great videos I have the 2000 FI version of the bird. I also have upgraded but used the Eastern beaver looms for the wiring (plug in and play) they bypass the loom reducing electrical resistance through the loom. I did find that the plug from stator was still a weak point so soldered those wires and heat shinked. I'm fairly local to you being Norwich way so would like to chat blackbird info. Mine is a little less standard than yours with straight bars, 4-1 pipe and loads more.

@MotoSera 3 жыл бұрын

Awesome. All good stuff to know! Also good to know there's some more Blackbird owners locally. Thanks for watching! 😊

@hansottosmotos 3 жыл бұрын

Hi, very nice video, thank you!

@MotoSera 3 жыл бұрын

Glad you liked it!

@DonCurtin 3 жыл бұрын

Great upgrade, thanks for doing a Video. I've only owned my Blackbird since April. Another issue I've found online is the dual braking. There is some extra kit bolted to the fork, apparently it can seize, needs greasing. Maybe some content for you. Also this loom plug seems to be an issue on the Fi models, not sure if yours is injection. Your push bike camping follower....

@MotoSera 3 жыл бұрын

The secondary master cylinder on the front fork applies the rear brake when the front is applied. It's true the can seize. I am planning a video on the linked brakes at some point. I am just trying to figure out how best to present it. My bike is carb, so I don't have the loom plug to worry about. 😁 Thanks for watching! And stay safe on whatever form of 2 wheels you are on! 😅

@Guy-ky9mc Жыл бұрын

Thank you for sharing

@jonburgess9903 2 жыл бұрын

Hi Sarah, Excellent video. I have a 2007 model Blackbird with 20k on the clock. The red FI light comes on after 20 to 30 miles. No fault codes are coming up when the engine runs. It goes off after turning the engine off and it restarts ok. On a Blackbird forum it has been suggested that I do a loom fix. Do you think doing the loom fix will sort this. Where do I get hold of a Yamaha FH020AA. Where do I get the new connectors from. Have looked at a Rectifier from Jaws for £98. Many thanks

@jonburgess9924 Жыл бұрын

I am thinking of changing the Regulator Rectifier on my 2007 Blackbird with 20k miles as a precaution. Do you think the Yamaha FH012AA would fit my bike (£50 approx) or do you think I need to get a model specific one from Jaws for (approx £100). Very good video and thanks for your help. 4:00

@ockertcw 2 жыл бұрын

Hey Sera. Excellent video I bought the MOSFET FH020AA But I se that my 1999 Bird has got 2 red 2 green and 2 smaller white wires . Can you assist me pleas Thanks

@Duffloop 3 жыл бұрын

Excellent video! Cheers. Ere - what's the blue tube running down the side of the frame?

@MotoSera 3 жыл бұрын

It's the oil line for my Scottoiler :) Thanks for watching, pleased you found it useful!

@mattlongden28 10 ай бұрын

hi sera,im looking to get a used mosfet unit,but ive read some have had to file down the cooling fins as the unit is thicker and the bodywork wouldnt go back on?! its a used yamaha unit off a 2016-2021 yamaha xsr 900,but its still an FH020AA with stainless steel back and1 hole slightly elongated,will this fit/work ok?thankyou

@redrocket99efi Жыл бұрын

Nice edit .. i have a 99F1 One wire more , you know how to wiring it ?

@jonburgess9903 2 жыл бұрын

Thank you for the video it was very helpful. I have a 2007 Blackbird with 15k on the clock. I have no issues with the battery but have noticed the seat feels very hot after about 50 miles. I wondered if this could be the Regulator Rectifier. Any suggestion would be much appreciated. Thank you.

@MotoSera 2 жыл бұрын

I'm pleased you found it useful. It's unlikely to be the regulator, they are under the side panel. It could just be the hot air flowing over the engine and warming the seat. Mine can get quite warm, especially if it's a hot day or I get stuck in traffic.

@jonburgess9903 2 жыл бұрын

@@MotoSera many thanks

@louis2128 3 жыл бұрын

You should do a tutorial on how to equip a gear indicator onto the Super Blackbird.

@MotoSera 3 жыл бұрын

I've never really felt the need for one to be honest. Although I know many people like them 👍

@marcusohrling4940 2 ай бұрын

Hi Sera, Thanks for a great channel. Just bought an ’06 BBird, thought I’d replace the r/r as a preventative, too. Do you know if the 020AA or any mosfet r/r works with li-ion battery or not? Many thanks.

@MotoSera 2 ай бұрын

I'm not sure, I think it would be ok but it would be best to check with the battery manufacturer

@louis2128 3 жыл бұрын

Hi Sera! I just followed your tutorial and kinda dumb question but my plugs are tight ASF and I can't seem to push them up to be flush like your plugs so I was wondering if you could take a guess as to why not? Terminals are correct, they all made a clicking noise once they were properly seated and the plugs are facing the correct way and going into their corresponding slots. Should I just try muscling these mfers in? The plugs seem abnormally tight. TIA

@MotoSera 3 жыл бұрын

If they are actually clicked/latched on then you should be good to go. Try pulling them off and see if you can move them. They go on with a 3 or 4mm gap.

@shaun2312 3 жыл бұрын

Hey Sera, I'm wondering if your clutch basket ever rattles when it is cold?

@MotoSera 3 жыл бұрын

Only if the RPM is a little low - when idling at the correct speed (1100 rpm) it doesn't rattle any more than any other bike I've had. I do know it's a common thing though. Thanks for watching

@sergioscalia5922 3 жыл бұрын

Have you ever tried a blackbird with vfr 800 handlebars fitted, I did it in mine but cannot find a huge difference, honestly, what I find useful is a pair of heavier bar end weights, They reduce notably vibration at 4000

@MotoSera 3 жыл бұрын

I never felt the need for risers to be honest, so have never had them fitted. I try and avoid riding at 4k rpm to get away from the harmonics. Have tried different bar end weights with limited success. Thanks for watching and ride safe!

@georgeday5901 Жыл бұрын

Where did you get connectors from

@acuraintegra375 3 жыл бұрын

Very good video! congratulations! do you know if it fits in model 2000 with digital instruments?

@MotoSera 3 жыл бұрын

It will fit, but the mounting is a little different, you may need to add a hole in the frame for one of the bolts. Thanks for watching!

@acuraintegra375 3 жыл бұрын

@@MotoSera Thank you very much!!🤩

@MotoSera 3 жыл бұрын

You're welcome

@carlosjuarez4861 Жыл бұрын

Hola mucho gusto mi nombre es Carlos me parece muy interesante tus vídeos yo tengo una CBR xx 1100 . Creo que eres la persona indicada para que me indiques dónde conseguir en estados unidos los respuestos de mi moto

@jmac22a 3 жыл бұрын

What year was the yamaha fj that you used the regulator and what year is your blackbird I own 2001 fuel injections regards jamie

@MotoSera 3 жыл бұрын

2006-2012 have those reg/recs. My Blackbird is a 98. The later models are a little different and you need to drill a hole for mounting. Other than that, very similar

@denisrailey777 3 жыл бұрын

@@MotoSera I have a 05 BB so reg on the other side & the wiring a pain to get out/in. Left hand side better place..

@fishstix1299 2 жыл бұрын

I have a friend that has one and has this going on .... One by one the instrument cluster started going out but the bike would still start and run. Then the fuel pump ended up not working either then the bike wouldn't even try to turn over... He thinks its a ground issue.. What do you think? Any help would be appreciated..

@MotoSera 2 жыл бұрын

If its a fuel injection bike then I recommend checking the loom fix has been done. If you Google "Blackbird loom fix" then you'll get all the details. Good luck 👍

@fishstix1299 2 жыл бұрын

@@MotoSera thank you... We will try that first.

@letni9506 3 жыл бұрын

Got a speed four and i had a new R/R last year. Hardly rode it this year and now i can't go more than 5 miles on a fully charged brand new battery. I have the usual wires going to the r/r but i noticed there is a black wire with a ring connector connected to the left side where you put the bolt in to fasten to the frame. But also i have a red wire with a ring connector coming from the same place that isn't fastened to anything. Its just under the seat. Not sure if its always been there since i had the bike "fixed" or if its the problem. Any help would be appreciated.

@MotoSera 3 жыл бұрын

Sounds like it should be connected to the battery positive. Almost impossible to tell without seeing it and testing though. Good luck getting it fixed!

@letni9506 3 жыл бұрын

@@MotoSera yeah. I cant remember at all if it was connected to the battery as my memory is so bad. I didn't want to cause any damage. The black wire goes to where I mentioned. Red one just dangles Not even sure what it is because before I didn't have them just the regular wires into the rr. They must come from the alternator or stator as its had a new one of those too. I think I'm going to sell it as a non runner because its been a pup and I can't throw any more at it.

@MotoSera 3 жыл бұрын

@@letni9506 can you trace the red wire back to its source?

@letni9506 3 жыл бұрын

@@MotoSera I'll have to check. They just come out under the tank, under the seat with one connected to rr bolt. I'll try a few more things but I've had everything replaced that is involved with charging

@martincard9322 3 жыл бұрын

Hi sera do you have a link for this reg/rec

@MotoSera 3 жыл бұрын

I bought it from ebay, if you search for the part number you should get several options. Thanks for watching!

@user-bq9vc7jh3d 6 ай бұрын

Where do you purchases these , can't find one

@MotoSera 6 ай бұрын

They most often come up on eBay

@philrobshaw8043 2 жыл бұрын

is this not good for the 05 F I model?

@MotoSera 2 жыл бұрын

The mounting of the reg rec is different, otherwise they are similar

@perfectmotoadventurespaulf1968 3 жыл бұрын

Thank you, can I bring my bike over. Lol

@MotoSera 3 жыл бұрын

Sure, why not? 😅 Thanks for watching!

@chrisp.5272 2 жыл бұрын

Purchased my first Blackbird, seller was pretty dishonest/omitted details about condition of bike. It’s a 96’ battery isn’t charging, I want to overhaul the charging system with Rick’s RR and Stator. Is there any particular brand you recommend over Ricks? Also the turn signals are intermittent, seems the toggle is faulty, and the brake light doesn’t work. It’s a project bike, but still I paid $3,200USD for these electrical issues and I’m not too happy about it.

@MotoSera 2 жыл бұрын

The Rick's kit is a good option if you are in the USA. Turn signal switch is a common issue and easy to fix. Take the switch gear apart and spray it with some electrical contact cleaner and work the switch to clean it up. Sometimes you can get it in there without dismantling the switch completely. Good luck and I'm sure you will get it sorted in no time!

@chrisp.5272 2 жыл бұрын

@@MotoSera Thanks for the reply! Really appreciate your videos, and advice.

@MotoSera 2 жыл бұрын

You're welcome, happy to help!

@alexesd6125 3 жыл бұрын

rs41 .. rx50... rectifier what does it mean ??

@MotoSera 3 жыл бұрын

They are the old diode type. Thanks for watching 😊

@turk6770 2 жыл бұрын

best regulator oem? long lasting twill

@MotoSera 2 жыл бұрын

Always buy an OEM one if you can find one. Even secondhand they will likely be more reliable than the cheap copies. Shindengen are the OEM for all the major manufacturers

@ockertcw 2 жыл бұрын

Sorry it is one smaller white wire with a black strip. Thanks

@MotoSera 2 жыл бұрын

You can just tape it up out of the way. It's not needed for the FH020AA That should leave you with 3 yellow, 2 red and 2 green. The yellow go to the input of the reg rec, doesn't matter what order. The 2 red are the positive and the 2 green are the negative. 2 red go to the positive output and 2 green to the negative. Make sure you get the the right way around! And disconnect the battery before you start.

@seabaron1 3 жыл бұрын

Buyer Beware .... There are tons of cheap new Chinese copys of the SHINDENGEN MOSFET FH012AA & FH020AA out there including eBay. Im not exactly sure if Sera purchased a used original Shindengen Unit (in good cond) or what, maybe she can tell us ...... but the old adage still remains true ... You get what you paid for!!

@MotoSera 3 жыл бұрын

Absolutely, there are tons of fakes out there. I purchased a used unit. The genuine ones have specific markings on them, I am sure there are pictures on Google of how to identify them. Alternatively buying a new unit from a reputable source is a good idea, avoiding Amazon and eBay fakes. Thanks for watching!

@TheBlueBikeDoyle 3 жыл бұрын

I believe that a common problem with honda

@MotoSera 3 жыл бұрын

Yes, well known issue on a lot of Honda's and other makes too Thanks for watching :)

@Big1_ 3 жыл бұрын

You forget to put heat paste before install it. Another upgrate is the Ducati one, mine is Ducati and runs perfect. Byeee

@MotoSera 3 жыл бұрын

Sounds good. Not really any need for heatsink paste, but it doesn't hurt if you want to do that. Thanks for watching.

@sammemrys8195 3 жыл бұрын

What can't you do?😊

@MotoSera 3 жыл бұрын

Sing or dance 😂

@parttimelegend..9373 11 ай бұрын

Finally.. You are 100% a professional... I love the video and that is a really awesome bird hack.. Marry me please... Ratings ⭐⭐⭐⭐⭐ And a scooter 🛵... Let me know if you want the FI falt fix trick.. You certainly deserve it for free... 😂