Rekluse RadiusX Installation for BMW F650 F700 F800 Parallel Twins

No video

Rekluse RadiusX Installation for BMW F650 F700 F800 Parallel Twins

Рет қаралды 19,308

Күн бұрын

This video covers the installation process for the Rekluse RadiusX centrifugal clutch RMS-6305 - BMW F650 GS Twin (09-12), F700 GS Twin (13-18), F800 GS (09-18), F800 GS Adventure (14-18), F800 GT (13-16), F800 R (09-17), F800 S (07-10), F800 ST (07-12).
See your owner's manual and rider's guide for more information.

Пікірлер: 17

@diablodiablo1937 5 жыл бұрын

I am new driver.. I installed the recluse clutch its perfect.. from Dubai 👍💪

@somebodybody6514 4 жыл бұрын

Amazing vídeo! Cheers from Brazil!

@rosesbite 4 жыл бұрын

would love to get this on my 04 honda Shadow 600. some day

@RekluseMotorSports 4 жыл бұрын

Thank you for your interest in a product for your Honda Shadow. While we don't currently support this model, we'll let our R&D team know there is interest so they can consider it for future development.

@prasta 2 жыл бұрын

Great video! Whats the importance of the basket sleeves? Would the clutch not fit snugly if not used?

@jasonv9202 2 жыл бұрын

Do you have to drain the oil first?

@RekluseMotorSports 2 жыл бұрын

If you lay the bike on its side, you won't need to drain the oil. If using the bike's center stand then the oil will need to be drained first.

@janshah6749 5 жыл бұрын

do you have video to install at yamaha WR450f 2005?

@RekluseMotorSports 5 жыл бұрын

Thank you for your question. Our install videos deal with the general process of installation and for reference only. You will still need to follow your installation manual and setup sheet, as installation varies by model. You can visit our channel and enter the search term "Cable" to see all videos dealing with cable actuated models, such as yours.

@vadymtsvaygoft3395 5 жыл бұрын

Hi, do you plan to produce RadiusX for BMW R1200GS soon?

@RekluseMotorSports 5 жыл бұрын

Thank you for your question. An auto clutch should be available in the coming months, so stay tuned!

@dioginhoooooooo 5 жыл бұрын

This isn't the radiusx clutch is the exp

@RekluseMotorSports 5 жыл бұрын

Hi there, yes, RadiusX was originally named EXP. We upgraded it with our TorqDrive friction disk technology

@dioginhoooooooo 5 жыл бұрын

@@RekluseMotorSports i need to know how to install the upgraded version (RMS-6305E)

@stevemiller4352 4 жыл бұрын

I’m going to add another ‘thumbs-down’ to your videos. I purchased a nearly new BMW F800GS with a Rekluse clutch. I also bought different levers (in attempt to decrease my lever gap for better ‘fit’), and since then, despite viewing your videos multiple times, have not been able to decipher how to get correctly re-adjusted. Your online videos & manual appear to lack complete definitions for Free Play Gain and Installed Gap. Wading through things about my 5th time, I now understand those terms well enough and have, (what appears to be) fairly closely set Free Play Gain, but cannot shift into gear (with the clutch pulled), without immediately killing the engine. Meaning I am not disengaging at all. I really don’t want to trash can your clutch until I have at least run it a while correctly adjusted, but this is really getting old.

@johnny.storm-wolf 2 жыл бұрын

Does the bike launch forward when you go into gear and then dies? OR dies immediately? maybe your side stand sensor is buggered and needs repair (common problem) Have you made absolutely sure the fact that the clutch is engaging is killing the engine?

@stevemiller4352 2 жыл бұрын

Thanks for the reply. But at this time IDK what steps I may have taken back then, but I did get it correctly adjusted. I now use the bike as a regular manual clutch except 1st gear at stops. For that it works fine. It’s novel, but I have yet to see enough benefit to overcome the cost of install. Lucky me I guess, mine came with the bike.