Comparing & Testing Several Valve Core Removal Tools

Рет қаралды 13,566

2 ай бұрын

How Hard is it to remove leaking shrader valve cores? We're about to find out, I'll let you decide which is the best.
~~ONE LINK TO STAY UP TO DATE, FOLLOW ME ON ALL PLATFORMS~~
www.reliablehvacr.net
-Weekly livestreams turned into Podcasts, listen on the go
spotifyanchor-web.app.link/e/...
~Tool recommendations w/ links~
kit.co/ReliableHVACR
~RELIABLE HVACR MERCH, SHIRTS/HOODIES~
my-store-11580953.creator-spr...
~Get FREE TRIAL & DISCOUNT on Jobber software to run your business~
jobber.grsm.io/ReliableHVACR
~Get REAL CASH BACK on ALL GAS (personal or company gas)
upside.app.link/ADRIAN78939
~SUPPORT THE CHANNEL & BECOME A MEMBER~
/ @reliablehvacr
~BUSINESS INQUIRIES~
reliablehvacr956@gmail.com
#reliablehvacr #hvac #hvaclife #refrigeration #hvacr

Пікірлер: 93

@ReliableHVACR

Follow up video on how to fix Appion

@juicyHTX

I’ve found with the Appion VCRT they can be a bit of a pain to remove the core once you have it unthreaded. There’s a trick to it, loosen the tool until you start to bleed pressure then screw it back in slightly and they come up every time.

@shifter8207

With appion you can squeeze the teeth together to get a proper tension on the core

@joeopalomino1028

Your video appeared to show bias against Appion and in favor of Fieldpiece. However, it's worth noting that Fieldpiece also didn't grab on the first attempt. In my experience as someone who uses both tools in the refrigeration industry, space is a crucial consideration and sometimes the size of the Fieldpiece makes it impractical. Regarding the Appion's grabbing issue, I find that frequently pinching the ends is necessary for it to effectively grab the cores.

@brandonorozco6141

C&D valve core removal tool hasn't failed me

@johnnyprotalk3352 21 күн бұрын

in response to the appion remover that one is the second generation, there is video they have to adjust the tip.

@ebfsystem

I have used every single core remover on the market and eventually they all leak at some point, specially Apion

@stueyknuxx

Have got 2x of the Navac ones, used both 1/4 and 5/16 sizes at least half a dozen times each , no issues at all so far 👌

@Shawn_RHVAC

The appion code tools sucks, I WAS VERY VERY DISAPPOINTED IN THE INABILITY TO GRAB THE CORE AND REMOVE

@Roadkill750

I despise the Appion's never has worked in years of use....I always blow it out with the gas pressure.

@rgmatta3524

very informative video. Well done!

@RileyKnifeandTool

Good to know about the Fieldpiece 5/16" adapter. I usually double up the Appion if I want to isolate my micron gauge. It's little bit of a pain, but it works, and it's only slightly bulkier than the Fieldpiece 😄. Can't say I've ever had much issue with the cores falling out, but I think I did have to adjust the tension on one of them, which is easy enough to do. If I had it to do over, I'd probably grab a couple of Fieldpieces with the adapter.

@idontlikemustard6888 14 күн бұрын

Thank you! You’ve made my journey in starting my business easier

@flyinghigh5531

I only have the first appion model for both sizes. I noticed when I remove the core, I have to back the threads out off the service port so the gasket isn’t smashed, and kinda wiggle the tool so it comes out easier, it can be a pain. Also, I’ve ran into service ports that are smashed from people over tightening the non gasketed caps, so getting the cores out is impossible😅 great review, I’m glad I’m not the only one!