Removable JessEm Stock Guides for the Harvey High Low Fence

Рет қаралды 17,653

2 жыл бұрын

In this video I'll show you how I mount the JessEm Stock Guides to my 10" Harvey Cabinet table saw with the high low fence. It's a simple and straight forward install that anyone can do. Everything you'll need is linked below!
Affiliate links ( helps support the channel):
JessEm 04301 Clear-Cut TS Stock Guides - amzn.to/3z0okIF
Mag Switches - amzn.to/3J4ArJd
Filming gear for this video (amazon affiliate links):
Panasonic Lumix GX85 - amzn.to/3PkHqQQ
Panasonic 25mm f/1.7 - amzn.to/3RH87AI
Follow me on Social Media:
instagram: / keywoodworks
facebook: / keywoodworks
twitter: / keywoodworks
#woodworking #jessem #stockguides #magswitch

Пікірлер: 39

@KeyWoodworks 2 жыл бұрын

Heads up! Since using the jig for a week, I swapped out the 90lb mag switches for the 150lb mag switches. I used a 1 5/8" forstner bit to sink those 150s into the jig no problemo!

@krisbabic89 Жыл бұрын

Did it get squirrley, or were you just wanting the stronger magnets in case? I've yet to meet a woodworker who doesn't over engineer LOL. I'm wanting to build one of these here in a few weeks

@scottb.2022 Жыл бұрын

Just was going to ask you about this as I heard you mention it on your podcast. I just ordered the stock guides today. I'll order the 150s.

@KeyWoodworks Жыл бұрын

Never got squirrely, it was just the peace of mind with over engineering 🤣

@krisbabic89 Жыл бұрын

@@KeyWoodworks that's what we do baby! 😂 I took your advice and did the larger magnets on mine. Turned out great. If my project can't hold 1,000 LBS then it's under engineered!

@scottb.2022 Жыл бұрын

Hi, just finished mine up today and works as advertised. Thanks for the great idea on using magnets to hold it down.

@timdoyon1964 3 ай бұрын

Excellent video. Great explanation, clear and concise… I have a Harvey Fusion II table saw and you just convinced me to add the stock guides. Thanks!

@scoott28 2 жыл бұрын

Nice video. I find myself enjoying The videos where you talk and explain your work more than your no talking ones.

@KeyWoodworks 2 жыл бұрын

Thanks for watching!

@scottb.2022 2 жыл бұрын

Brilliant! I've always wanted the JessEm Stock Guide, but didn't want to permanently mount it to the fence. This is the perfect work around. Thanks for the idea.

@KeyWoodworks 2 жыл бұрын

It’s the perfect non-commital move

@ScottWalshWoodworking 2 жыл бұрын

you table saw setup is super sick - making me jealous!

@KeyWoodworks 2 жыл бұрын

Your shop organization makes me jealous so we’re even

@SpencleyDesignCo 2 жыл бұрын

Great video nick!

@KeyWoodworks 2 жыл бұрын

Thanks Spencley!

@krisbabic89 2 жыл бұрын

Great video. I gotta get me some of them!

@KeyWoodworks 2 жыл бұрын

Thanks!

@stormbytes 9 ай бұрын

Great job. Would have loved to see it work.

@AlAmantea 2 жыл бұрын

I've been using the Jessem guides for the past year and a half now, and they are absolutely one of the best additions to my table saw. I also got them for my router table (completely different setup). The only problem I've had is that they can be a bit difficult to use with smaller/thinner stock, especially when making thin cuts. It's almost safer to not use them for thin cuts.

@KeyWoodworks 2 жыл бұрын

I’ll be getting some for my router table too! They are awesome!

@Saileahgaz Жыл бұрын

If you dont mind: Whats the most narrow rip you can make with these safely?

@AlAmantea Жыл бұрын

@@Saileahgaz well, it depends on which side of the blade you make your cut. From between the fence and blade, I've done 1/2" using the jessem guides without issue, but it does get complicated at the end of the cut to push the piece all the way through. I normally do skinny rips to the outside of the blade so it won't bind, and in that situation I've done inlay material at 1/16" with proper setup and control.

@gregmize01 2 жыл бұрын

Oak for the win!

@KeyWoodworks 2 жыл бұрын

Black red oak is the best red oak

@ARBWoodwork 2 жыл бұрын

Great idea on the Mag Switches

@KeyWoodworks 2 жыл бұрын

Magnets are always the answer

@KeimpieceCarpentry Жыл бұрын

Hey man, how are you liking the new table saw? You've had it for about a year now. Any regrets only getting the 2HP? I'm super close to pulling the trigger on getting the same one. Is the tin coating worth it?

@robertknowles3677 7 ай бұрын

I am looking to install my new Jessem Stock Guides as well I saw another video wherein the guy decided to just screw the jessem rail system right into his fence. I cannot remember if it is sawstop or harvey tablesaw. He mentioned that the jessem rail does not get in the way so he just takes off the two arm rods when he needs to. He said the rail does not get in way of other jigs. Anyone else have that experience? What other types of jigs would not work if the jessem rail without the rods is left attached to the fence? Has anyone seen the magswitches used like this without screwing them down? I was wondering if I were to setup this same type of jig and not screw down the magnets, if there would be any movement of the jig?

@derekrobertson1548 2 жыл бұрын

731 woodworks put out a video of this about a week ago using the same set up.

@KeyWoodworks 2 жыл бұрын

No kidding!

@jaykepley5238 2 жыл бұрын

Very clever! 💪💪💪

@KeyWoodworks 2 жыл бұрын

Magnets are always the answer

@jakebaker7405 2 жыл бұрын

Great project. To get it to work, does your uncle need to be named Bob? Unfortunately mine is named Robert.

@KeyWoodworks 2 жыл бұрын

You’re in luck, I call your uncle, Bob

@shiloo 2 жыл бұрын

Dang, I bought the 95lb magnets and just heard your comment on ShopSounds that you switched them out. Just ordered the 150’s and I’ll return those 95’s arriving today.

@KeyWoodworks 2 жыл бұрын

Yeah I need to make a pinned comment that says I swapped over to the 150s, You'll need a 1 5/8 forstner bit for the 150s fyi.

@shiloo 2 жыл бұрын

@@KeyWoodworks pretty cool that I coincidentally ordered the stock guides when your video came out and then y’all talked about them on the pod