Remove The Border Lines | Merge or Join Objects Seamlessly

Remove The Border Lines | Merge or Join Objects Seamlessly | Shrinkwrap Modifier In Blender

Рет қаралды 92,839

Күн бұрын

In this tutorial, we have discussed an easy technique to join two objects seamlessly in Blender. If we join two objects using the traditional options like Boolean, it creates a visible seam line or a border between the two objects. But with a shrinkwrap modifier and a data transfer modifier, we can easily join the objects without any such border. Please watch the video for the complete tutorial. If you have any question on this tutorial, please leave your comment below.
𝐅𝐨𝐥𝐥𝐨𝐰 𝐮𝐬 𝐨𝐧 𝐈𝐧𝐬𝐭𝐚𝐠𝐫𝐚𝐦 👉 / 5minutesblender
𝐓𝐡𝐚𝐧𝐤𝐬 𝐟𝐨𝐫 𝐲𝐨𝐮𝐫 𝐝𝐨𝐧𝐚𝐭𝐢𝐨𝐧𝐬 👉 donorbox.org/5-minutes-blender
==================================================
We have many more tutorials that can help you learn Blender like a professional. You can go through the following playlists for the relevant topics:
👇 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 𝐅𝐨𝐮𝐧𝐝𝐚𝐭𝐢𝐨𝐧 𝐂𝐨𝐮𝐫𝐬𝐞 𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬:
If you are absolutely new to Blender, take this foundation course.
• Blender Foundation Course
👇 𝐀𝐥𝐥 𝟏𝟐 𝐂𝐥𝐚𝐬𝐬𝐞𝐬 𝐓𝐨𝐠𝐞𝐭𝐡𝐞𝐫 𝐈𝐧 𝐎𝐧𝐞 𝐇𝐨𝐮𝐫:
• Blender Foundation Cou...
👇 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 𝐓𝐢𝐩𝐬 𝐀𝐧𝐝 𝐓𝐫𝐢𝐜𝐤𝐬 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Blender Tips & Tricks
👇 𝐄𝐚𝐬𝐲 𝐌𝐨𝐝𝐞𝐥𝐬 𝐅𝐨𝐫 𝐁𝐞𝐠𝐢𝐧𝐧𝐞𝐫𝐬 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Easy Models For Beginners
👇 𝐌𝐚𝐭𝐞𝐫𝐢𝐚𝐥𝐬 𝐘𝐨𝐮 𝐍𝐞𝐞𝐝 𝐈𝐧 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Materials You Need In ...
👇 𝐀𝐥𝐥 𝐓𝐞𝐱𝐭 𝐄𝐟𝐟𝐞𝐜𝐭𝐬 𝐈𝐧 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Text Effects In Blender
👇 𝐂𝐚𝐦𝐞𝐫𝐚 𝐌𝐨𝐯𝐞𝐦𝐞𝐧𝐭 & 𝐒𝐞𝐭𝐭𝐢𝐧𝐠𝐬 𝐈𝐧 𝐁𝐥𝐞𝐧𝐝𝐞𝐫:
• Camera Movement & Sett...
👇 𝐔𝐬𝐞𝐟𝐮𝐥 𝐋𝐢𝐠𝐡𝐭𝐢𝐧𝐠 𝐒𝐞𝐭𝐮𝐩 𝐈𝐧 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Useful Lighting Setup ...
👇 𝐑𝐢𝐠𝐢𝐝 𝐁𝐨𝐝𝐲 𝐏𝐡𝐲𝐬𝐢𝐜𝐬 & 𝐑𝐢𝐠𝐢𝐝 𝐁𝐨𝐝𝐲 𝐂𝐨𝐧𝐬𝐭𝐫𝐚𝐢𝐧𝐭𝐬:
• Rigid Body Physics in ...
👇 𝐅𝐢𝐫𝐞 & 𝐒𝐦𝐨𝐤𝐞 𝐒𝐢𝐦𝐮𝐥𝐚𝐭𝐢𝐨𝐧 𝐈𝐧 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Fire & Smoke Simulatio...
👇 𝐅𝐥𝐮𝐢𝐝 𝐒𝐢𝐦𝐮𝐥𝐚𝐭𝐢𝐨𝐧 𝐈𝐧 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Fluid Simulation in Bl...
👇 𝐌𝐚𝐬𝐭𝐞𝐫𝐢𝐧𝐠 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Mastering Blender
If you want to watch our own creations in Blender, you can also check out the following channel where we regularly upload videos on Animation, Space Exploration and AI.
𝐎𝐮𝐫 𝐨𝐭𝐡𝐞𝐫 𝐜𝐡𝐚𝐧𝐧𝐞𝐥 𝐥𝐢𝐧𝐤: / @thealienworld
#Blender #Animation #Join
Timestamp
00:00 Introduction
00:40 Add a monkey and a cylinder
01:24 Prepare the cylinder for a join operation
04:12 Create a vertex group with variable weights
05:24 Add a Shrinkwrap modifier
06:14 Add a Data Transfer modifier
07:14 Verify the final result

Пікірлер: 127

@5MinutesBlender 2 жыл бұрын

𝐇𝐨𝐰 𝐭𝐨 𝐜𝐫𝐞𝐚𝐭𝐞 𝐚 𝐩𝐞𝐫𝐟𝐞𝐜𝐭 𝐦𝐨𝐥𝐝 𝐢𝐧 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 👉 kzfaq.info/get/bejne/a51zoLWArrC0Zqs.html

@krysidian 2 жыл бұрын

That data transfer tip is so useful and I think the modifier is pretty underrated in general. Thank you!

@robertcoyle1532 2 жыл бұрын

I figured that Blender would have an easy straight forward way of doing this... Thanks for directing me through this crazy morass of operations.

@camiloteram Жыл бұрын

Right? What a nightmare

@lavatr8322 Жыл бұрын

Thats one downside of POLYGONAL modelling.. which for these kind of things, Cad is useful

@NN-wc7dl 2 жыл бұрын

This is and looks great. But many steps to remember. I wish Blender could automate things like this for the feeble-minded...:-)

@macnavi 2 жыл бұрын

I have created individual entries in my Notes app on my computer, with keywords and a link to videos like this. Sometimes even with a screenshot, so I can quickly find and remember what I need to do. It’s easy for me to find techniques back that are more complicated or I don’t use often.

@NN-wc7dl 2 жыл бұрын

@macnavi 👍

@pleochroic 2 жыл бұрын

Very cool; I learned a lot -- never used the Data Transfer modifier before. Note that Auto Smooth Normals needs to be turned on for both objects, which makes sense since we're trying to match normals to make that line disappear. Thanks! You seem to have a lot of short, to-the-point tutorials, which is really helpful when one is just quickly looking for a solution while being busy with something else. Subscribed.

@5MinutesBlender 2 жыл бұрын

Thank you so much for the appreciation and also for the subscription 💝💝

@JChauCheukLeongJ Жыл бұрын

Definitely live your tutorial, useful and clear demonstration, thankyou so much!

@5MinutesBlender Жыл бұрын

Glad it was helpful 😊 Cheers bro!

@ginnginn8282 Жыл бұрын

at last I found how to do this, searching info fo long time already..... you are my hero man, thanks a lot!

@5MinutesBlender Жыл бұрын

I'm so glad to hear that 💝💝💝

@ClaudioMalagrino 10 ай бұрын

The Data Transfer modifier is very useful. Thank you for the tutorial.

@5MinutesBlender 10 ай бұрын

Glad it was helpful! 💝

@silverony8305 2 жыл бұрын

amazing tutorials as always!

@5MinutesBlender 2 жыл бұрын

Thank you so much bro! I'm happy you liked it 💝

@VSWRKS 4 ай бұрын

Dope stuff! Thank you!❤

@5MinutesBlender 4 ай бұрын

Thank you too! Glad you liked it 😊💝💝

@iamrusdark 2 жыл бұрын

Thanks for the interesting tutorial. I've never used a data transfer modifier before.

@5MinutesBlender 2 жыл бұрын

Thanks, I hope it will help you sometime 😃

@orpheuscreativeco9236 Жыл бұрын

Very useful, thanks for sharing! 🙌

@5MinutesBlender Жыл бұрын

Glad it was helpful! Cheers! 😊😊

@elbadrey Жыл бұрын

Perfect, thank you for your help.

@5MinutesBlender Жыл бұрын

Glad it helped! Cheers!

@Loriba Жыл бұрын

Lifesaving! Thank you!

@5MinutesBlender Жыл бұрын

Glad it helped 😊

@TheNei 5 ай бұрын

Amazing! Thanks!

@5MinutesBlender 5 ай бұрын

Glad you like it!

@mrcesporinas1041 Жыл бұрын

Thanks

@alhdlakhfdqw Жыл бұрын

really smart trick thank you very much for sharing! :) subbed

@5MinutesBlender Жыл бұрын

Thank you so much 💝💝

@JesseCotto Жыл бұрын

WOW!! Well Done!

@5MinutesBlender Жыл бұрын

Many many thanks 💝💝

@JessicaJEmerson Жыл бұрын

Very helpful video! I hope one the updates makes this process simpler. I learned on Blender so I hate to even say this, but Cinema 4D makes this super easy.

@5MinutesBlender Жыл бұрын

Good to know that it's easier in Cinema4D, I have never used Cinema4D. Anyway, thanks for the appreciation ❤️

@kaysseibrahim6477 5 ай бұрын

This video was very useful, thank you for your effort ❤

@5MinutesBlender 5 ай бұрын

I'm so glad it helped! 😊💝💝

@demetriusharris2169 Жыл бұрын

this channel is a game changer

@5MinutesBlender Жыл бұрын

Thank you so much 💝💝

@user-po3ym3ol2b 2 жыл бұрын

Спасибо!!!

@hongvoonking2461 Жыл бұрын

thank man, really help me big time!!!

@5MinutesBlender Жыл бұрын

I'm glad to know that it helped! 😊💖💖

@speedzification Жыл бұрын

brilliant stuff, thanks

@5MinutesBlender Жыл бұрын

Glad you found it useful 😊💖💖

@mohdkhairimorad 2 жыл бұрын

Genius tutorial thanks

@5MinutesBlender 2 жыл бұрын

Glad you liked it!

@vetknowledge4929 2 жыл бұрын

It's a great tutorial 😍👍

@5MinutesBlender 2 жыл бұрын

Thank you so much bro 💝💝

@mrphoenix7612 2 ай бұрын

thank you so much you just help me render a boiler model XD

@5MinutesBlender 2 ай бұрын

Great! 💝💝 Glad to know that it helped you 😊

@user-cc3ne8br8n Жыл бұрын

impressive. it is first time to see this skill.

@5MinutesBlender Жыл бұрын

Thank you so much 😊

@ssharma26 Жыл бұрын

What a brilliant tutorial! 🤟

@5MinutesBlender Жыл бұрын

Glad you liked it! 💝💝

@ssharma26 Жыл бұрын

@@5MinutesBlender your channel is too good. I've subscribed and I'm gonna practice a tutorial daily.

@5MinutesBlender Жыл бұрын

@@ssharma26 Thank you! Wish you all the very best for learning Blender, may you become an expert before this year ends 😊

@ssharma26 Жыл бұрын

@@5MinutesBlender thank you 😌🙏 for your encouragement

@indianmonster1445 2 жыл бұрын

Great sir.....

@5MinutesBlender 2 жыл бұрын

Thank you 💝💝

@macnavi 2 жыл бұрын

Brilliant

@5MinutesBlender 2 жыл бұрын

Thank you!!

@stimpyfeelinit 10 ай бұрын

impressive

@5MinutesBlender 10 ай бұрын

Thank you so much 😊💝💝

@nghin4vacsf Жыл бұрын

Complex, but effective. Fusion 360 handles it effortlessly, but I learned the ins and outs of it in Blender. Powerful stuff. Thanks.

@5MinutesBlender Жыл бұрын

Great to hear! Cheers bro! 😊

@monarchblack3004 2 жыл бұрын

Great info (as always)! Could this method be useful, to add a mesh to another mesh, then rig for animation? e.g. Adding an extra arm to a character etc...?

@5MinutesBlender 2 жыл бұрын

Yes, very much! You can add an extra arm, and assign the same armature as that of the main body. This extra arm need not be physically joined with the body, it can still remain a separate object and appear as an integral part of the character. Both will move along with the armature movement, no issues.

@leeanders3931 2 жыл бұрын

If you booleaned it inside a cube, would it pick up the normals on the new object, or would it mess with it? I use this method to get clean meshes for object export, and wanted to know if this would work with that.

@5MinutesBlender 2 жыл бұрын

If you use boolean, it becomes one single object, so the method won't work. It works on two separate objects that we want to attach to each other, not join. Whether the normals are honored or not, depends on the topology of the particular object in use, we have to test it. It should work if it is not a completely closed object. Even for the export, sometimes it may not work, the export function in Blender is not very powerful, it works for basic things. So we have to test it for a particular case, it may or may not work on case to case basis.

@leeanders3931 2 жыл бұрын

@@5MinutesBlender I see. Thank you!

@jujuboohoo 10 ай бұрын

In case you or anyone is interested... You can use data transfer to fix bad shading around a boolean cut. For example, duplicate suzanne and give it subdiv mod level of 2 then hide it. Boolean or cut into the first suzanne and clean up the topo around the cut and add small loop around the cut. Add vertex group to the bad shading around the boolean but stop at the loop you've added then use data transfer from the subdiv suzanne to it. You can also fix bad shading with shrink wrap as well.

@kanpuriyaclasses 2 жыл бұрын

🥰

@nileshparmar08 2 жыл бұрын

Can you make video on "Depth of Field" blender

@5MinutesBlender 2 жыл бұрын

Sure thing! Noted.

@aecg1033 2 жыл бұрын

Sometimes we need the common surface between the cylinder and the monkey to be open or perforated, how do we do it?

@5MinutesBlender 2 жыл бұрын

That may be challenging without joining the objects. However, you can first make the overlapping areas on both the objects perforated, then try to match hole to hole when you place one object on the other. The success rate of this method may vary on case to case basis.

@Jakommo Жыл бұрын

how would you do this with cylinders that are generated around the monkey with geometry nodes?

@5MinutesBlender Жыл бұрын

This method works with two different object. If your geometry node takes a monkey as input (for example) and adds some cylinders around it, it would output them together as a single object. So this technique may not be possible to easily apply there. We can think of some really clever way to segregate the cylinders in the output and then use some editing scripts and then projection - but the effort invested won't be justified. I'd rather look into the part in your geometry node where those cylinders are getting created. It would be a neat way and a better way to manipulate how the cylinders are created so that they are created smooth. May not be easy but that should be the way to go in my opinion.

@indianmonster1445 2 жыл бұрын

I was try make sunset scene reflection on river.... Water animatio simple how to making....

@5MinutesBlender 2 жыл бұрын

We are planning to create a tutorial on reflections, also requested by another friend. I have to test which method works best in which situation or what is the easiest way, based on that we'll make a tutorial. But reflection planes will surely play an important role in this. The challenge will be waving of the reflection as the water surface gets minor waves.

@blazejpopowicz1362 Жыл бұрын

Hello, this is very good ( thumbs up) and i have recreated this effect - but when i went on to render the image ( using default rendering settings), objects are clearly separated on the image. Can anyone advice on this?

@blazejpopowicz1362 Жыл бұрын

never mind, got it :)😂

@5MinutesBlender Жыл бұрын

@@blazejpopowicz1362 Glad you solved it yourself 👍 Congrats!

@cosmicfish1000 11 ай бұрын

I'm using Blender 3.6.1. Followed all your steps but when I get to 2:36 the cylinder flips upside down and the majority of it (including the top) is inside the monkey's head. The base snaps to the surface but the cylinder rotates 180 as soon as it snaps to the surface. Does anyone know what's happening here? I'm sure there's a simple solution. I'm new to Blender. Thanks Update: Tired with a cube and it works fine. Yet the cylinder flips 180.

@5MinutesBlender 10 ай бұрын

I tested this again in 3.6.1 and it works as expected even with a cylinder. In your case, probably the normals got flipped for the cylinder. Please turn on Face Orientation from the orientation settings and cross-check if the cylinder has all its faces correct. This upside down or "opposite" kind of effect hints to a reverse normal. Otherwise please send your blend file to us (5minblender@gmail.com) so that we can investigate it. Thanks!

@UnchartedWorlds 11 ай бұрын

Can this be baked so we can bring it into UE5?

@5MinutesBlender 11 ай бұрын

You can apply the modifiers and then export them for external uses. Please remember that they are still separate objects, they only look attached. If you need only one single object, you can try to join them together before you export. This join operation may or may not be good-looking depending upon what materials you are using for these objects.

@rojsin 6 ай бұрын

Great technique and explanation! But it doesn't work in Cycles (there are artifacts at the edges of the superimposed object) (in Eevee it works perfectly)...or maybe I need to adjust something else somewhere? Thanks in advance for your help!

@5MinutesBlender 6 ай бұрын

Yes, it does not give a clean result in Cycles. When we have overlapped surfaces (or surfaces very close to each other), Eevee only takes the top-most surface for rendering. But Cycles would consider both of them and mix them in a strange way. I am not yet aware of a fix for this, so sorry 🙁 Btw, I am traveling, so this late response.

@rojsin 6 ай бұрын

@5MinutesBlender The only thing I could think of is to disable shadow ray visibility in the properties of the superimposed object, but it's a half-measure and will look more or less only on not very protruding objects.... P.S. Traveling is wonderful! Come and visit us in Russia, as there are a lot of interesting places in our vast expanses;).

@5MinutesBlender 6 ай бұрын

Yes, I'll surely visit this beautiful country called Russia one day @@rojsin You may be glad to know that I have even written a romantic thriller based in Russia 😊 It's available on Amazon, but writing is my hobby, not a profession though.

@rojsin 6 ай бұрын

@@5MinutesBlender We say "a talented person is talented in everything";) What is the name of your book?

@5MinutesBlender 6 ай бұрын

@@rojsin It's named as "Planet of Love: You Die Only Once" www.amazon.in/Planet-Love-You-only-once-ebook/dp/B08L1F91TN 😊 There are lots of references to the soviet era, some international politics, Mr. Putin's team, a conspiracy, and a couple in love among all these things.... I tried my best to depict the country without actually visiting the place ever, so there could be some hits and some misses 🙂

@Pyr0xeene Жыл бұрын

I have a question, What if Im trying to do it with a sphere and cube? Somebody Help me please

@5MinutesBlender Жыл бұрын

Sphere on cube or cube on sphere? Cube on sphere will have a similar process (the bottom edge of the cube will be beveled outward and gradually join the surface of the sphere, but you need to place the cube a little down than just on the top of the sphere, it has to intersect with the sphere). For sphere on cube, you need to cut out 10% or so from the bottom of the sphere. This will give you a bottom edge for the sphere. Then the rest of the process will be the same as shown in this tutorial.

@Zarory Жыл бұрын

It works fine for me in Eevee, but not in Cycles??

@Zarory Жыл бұрын

Okay, it does work in Cycles, but not with two different image textures, despite being the same colors. How do I get around this?

@Zarory Жыл бұрын

It figured it out :3

@5MinutesBlender Жыл бұрын

@@Zarory Good to know that you figured it out yourself! I was on vacation, hence this late response.

@Darloud Жыл бұрын

Okay not bad. But how this will work on lowpoly? Highpoly very easy, at that point, but on low poly do such a thing much harder, because you dont have so many geometry.

@5MinutesBlender Жыл бұрын

The method remains the same, but for low poly, the smoothness will be affected - it won't look as neat & clean as we see here. You can take care of that by a smooth shading at least in some cases.

@Capn_Spaulding 6 ай бұрын

works on like 75% of the piece im trying to add, but the other side just sticks up and wont merge

@5MinutesBlender 6 ай бұрын

Can you send your blend file along with your model to 5minblender@gmail.com so that we can verify it and suggest a solution?

@mrcesporinas1041 Жыл бұрын

I join two stl but it look not nice after spoil the smooth

@5MinutesBlender Жыл бұрын

Oh! Maybe the particular model you're using has some special geometry. I can check it if you send over the models to 5minblender@gmail.com Thanks!

@mrcesporinas1041 Жыл бұрын

@@5MinutesBlender thanks a lot bro,i download and watch some your tutorial New sub here bro

@neltran15 4 ай бұрын

Well it was worth giving it a try and this may help with other projects, but it didnt work for my Pikachus' ears :(

@5MinutesBlender 4 ай бұрын

If you can send your model to us at 5minblender@gmail.com we can try to see why it did not work and what can be done to make it work. Thanks!

@chlbrn Жыл бұрын

But there is one problem here, if you got a material with texture applied to it, the seam from texture will appear

@5MinutesBlender Жыл бұрын

Yes. We usually use a UV map when a texture is applied. Since we are not actually joining the two objects here, they will have their own UV maps (either user-defined or auto-generated) and won't match with each other.

@chlbrn Жыл бұрын

@@5MinutesBlender What I can come up with is that like the weights of the vertices on the rim, you can give set the vertex color of those vertices with the value as the weights, then use the vertex color as alpha to make rim transparent to blend them.

@larryphotography Жыл бұрын

Selecting the edge loops just wouldn't work for me

@5MinutesBlender Жыл бұрын

Can you please describe the issue a little more so that we can help you? When you use the menu option to select the edge loops, does it not work? It may not work if there are multiple loops possible on your geometry based on the selected vertices (some may be dumb loops but Blender is not so clever to distinguish between them). It happens sometimes, you need to then manually select the vertices for the edge loops.

@larryphotography Жыл бұрын

@@5MinutesBlender it doesn't do anything when I select edge loops and alt shift and then clicking doesn't do anything at all

@larryphotography Жыл бұрын

@@5MinutesBlender geometry looks to me identical to the video

@5MinutesBlender Жыл бұрын

@@larryphotography Then we may need to look at your blend file more closely. Please send it to 5minblender@gmail.com, we will investigate and get back to you.

@gianssss 2 сағат бұрын

that made blender crash and made me lose all the work i did thanks

@fladoodel 5 ай бұрын

4 FPS

@5MinutesBlender 5 ай бұрын

You mean the play speed? The viewport animation may slow down but the actual render output won't be affected.

@ruslankazimov622 Жыл бұрын

Does this method also work outside blender as well ? Like if we export it as object to Sketchfab and Unity ?

@5MinutesBlender Жыл бұрын

No, it won't work after export because we are using a modifier and all modifiers either get applied or cancelled when you export. So this dynamic effect won't reflect inside another software.

@ruslankazimov622 Жыл бұрын

@@5MinutesBlender I appreciate your reply. Sure, I know about modifiers. But do normals stay same (smooth) in other programs?

@5MinutesBlender Жыл бұрын

@@ruslankazimov622 Yes, I think so. If you apply the modifier, it permanently changes the mesh. The same will be then exported so what you see is what you get - I believe.