Removing and installing Husqvarna Rider cutting deck, step by step description

No video

Removing and installing Husqvarna Rider cutting deck, step by step description

Рет қаралды 17,684

3 жыл бұрын

All you need to know about how to remove and install the Husqvarna Rider cutting deck of this kind. I also added some tips and trix and additional information.
Sorry about the noise picked up by the camera.
Should I have a text in the thumbnail or not?

Пікірлер: 40

@davidgibbons-wood9488 3 жыл бұрын

Superb video. Better than Husqvarna videos👌

@NilsKall 3 жыл бұрын

Thank you!

@dougreid2351 2 жыл бұрын

Very well done. Clear, concise and well ordered. Thank you. DOUGout

@NilsKall 2 жыл бұрын

Thank you!

@mikesworld60 3 жыл бұрын

Very nice video, Looks very well engineered. I have to do some lying around the ground to get the one off my John Deere. I like that you can do everything from a kneeling or standing position.

@NilsKall 3 жыл бұрын

It probably took some RnD to get the deck to work good, be easy to remove/service and have great durability and service life. The deck after this version don’t float as well but it is even easier to get into service position.

@stefanfixar 3 жыл бұрын

Lite krångligare än på min maskin att sätta klippdäcket i serviceläget 🤠

@NilsKall 3 жыл бұрын

Ja, de utvecklade det mer o mer. Är din maskin gjord i Sverige btw? Försöker få fram när de började tillverka de i Polen.

@ArcticExploring 3 жыл бұрын

Nicely done

@NilsKall 3 жыл бұрын

Thank you!

@Ed-lw9xf 2 жыл бұрын

Thnk you. Your videos are a blessing. I have owned one for 14 years. It is a bio clip rider 16. Problem, when I lower the deck it does not engage the mower blades? Maybe with your skills you can shed some light on this problem. Thanks.

@NilsKall 2 жыл бұрын

Hi! Great to hear that you like my videos! If you go to 9.25 in this video you might find the solution to your problem: kzfaq.info/get/bejne/g6pjiZOqt9vdn5c.html

@playerunknown8793 4 ай бұрын

Thanks

@NilsKall 4 ай бұрын

You are welcome! I am happy if it can help!

@user-tl9cs4nr9f Жыл бұрын

Great video

@NilsKall Жыл бұрын

Thank you!

@edwarddoorley8880 3 жыл бұрын

Hi, great videos, it has been really difficult to find any videos specific to these models for years, these videos are really clear and well made, thanks! Wondering if you had any suggestions on how to tighten the belts, I cant figure it out! I have a Rider 13 AWD, looks very similar to your Rider 16. Thanks again

@NilsKall 3 жыл бұрын

Hi! Glad to hear that you find my videos helpful! As far as I know, there is no way to tighten the belts. They should be tightened by pulleys that are using steel spring for the tightening. If it slips, either the belt is worn, to long (wrong belt) or there is something wrong with the tensioning system. What belt is it that slips?

@edwarddoorley8880 3 жыл бұрын

@@NilsKall Hi, thanks for getting back.That makes sense, I can't see any way or find any reference on how to tighten the belts. The loose belt is the one driving the mower deck, you are right that it needs replaced, it is very worn and cracked in places. Hopefully I will be able to get a replacement for such an old model! Thanks again.

@jamiesmith8313 2 жыл бұрын

Have you checked your deck pressure? Mine was stretching belts until I adjusted that , you put a bathroom scale down and lower the deck on it should be between 12/15 kilos mine was 45 ,you adjust it by bolts either side behind the front wheels

@lukeonthestork Жыл бұрын

Thank You, you explained that very well :-)

@NilsKall Жыл бұрын

I am glad that you liked it!

@davidbergquist9788 2 жыл бұрын

Mycket bra video, en av de få jag faktiskt hittat som gäller denna modell, av denna typ av instruktion! Du har lärt mig mycket och redan hunnit byta ut några saker tack vare dig, men har en fråga, kan du göra en video på hur man byter remmen som lyfter klippaggregatet för min lyfter inte upp längre ?

@NilsKall 2 жыл бұрын

Kul att mina videos är till hjälp! Menar du kedjan? Jag släpper en ny video i EM i den så pratar jag om och modifierar kedjan. Men om du börjar med att skruva loss plåten bakom ratten/mellan fötterna (den som det står instruktioner på och dom sitter med 4 skruvar) och kollar så kan du säkert se om kedjan gått av eller om det är i själva handtaget som det är problem.

@davidbergquist9788 2 жыл бұрын

@@NilsKall ååh det ska jag göra. Ska.ävrn bli skoj att se din nya video. Alltid trott det varit remmen som varit den som lyfter aggregatet, men tyckte det varit konstigt att den ska klara så mycket vikt.

@Gardsfix 2 жыл бұрын

Tack!! 👍

@NilsKall 2 жыл бұрын

Varsågod!

@conormc636 2 ай бұрын

Hi is it possible to adjust the deck forward or move it back closer to the wheels

@NilsKall 2 ай бұрын

There are no such adjustments. Why do you want to adjust this?

@conormc636 2 ай бұрын

@NilsKall I bought a new belt from a husqvarna dealer no matter what I do it won't reach the pulley on the deck only goes as far as the bolt on the pulley

@NilsKall 2 ай бұрын

@@conormc636Perhaps you got the wrong belt?

@conormc636 2 ай бұрын

@NilsKall that's the second one so I don't know its the same length same part number

@NilsKall 2 ай бұрын

@@conormc636 what rider do you have, what cutting deck and what year is it made. I can check what part nr you should have if I get that information.

@ArizonaKid 3 жыл бұрын

Sorry I’m late but man that had lots of parts to remember

@NilsKall 3 жыл бұрын

No problem, happy whenever you drop by. Happy 4th of July! Its not hard to do this, Just follow the manual and it’ll be fine!

@ArizonaKid 3 жыл бұрын

@@NilsKall you are good at stuff like that. .I just wing it and hope it turns out ok lol 😂

@StephenMortimer 3 жыл бұрын

Did I ever tell you the TRUE story of what my SWEDISH grandpa Tryck did ?? he named my mother TRIXIE TRYCK (trick) ("trick" if sometimes what a male patron of a "lady of the night" is called but TRIXIE is sometimes used for that "lady"(?) or a BAR MAID... as soon as possible she went to court and legally changed her name

@NilsKall 3 жыл бұрын

Haha! Quite a rascal! I can se where you got it from!