www.ebay.com/i... Here is a link to the tool to take off the lugs
Пікірлер: 40
@tomtom90712 жыл бұрын
Hey man just some helpful advice I have an NPR 300 myself the expensive socket device that you have Is engaging the inner lug nut as you begin to loosen the outer that’s why all your stage two nuts were loose Just use a regular socket on the first nuts and you will not have that problem Also that 60 to 1 ratchet thing is brilliant that would really come in handy on a roadside breakdown because it is small enough to keep in the toolbox never seen one of them before cheers mate
@ironore18662 жыл бұрын
Thanks for the tip!. I hadn't thought about that.
@carmechanic2 жыл бұрын
Thanks for taking the time and showing me
@ironore18662 жыл бұрын
Glad it was helpful. Thank you for watching.
@fdny3303 жыл бұрын
This was such a helpful video I spent 20 min beating the snot out of the rims with a torch too !!! Thanks for posting
@ironore18663 жыл бұрын
Great to hear, good luck!
@FarmhandHauling Жыл бұрын
This was really valuable! I have almost the exact same truck. Blue swoosh on the side and all. I am going to have to replace two tires and a brake line (I think)
@ironore1866 Жыл бұрын
Glad this was helpful. Going to do a vid on the rear brakes at some point. They need replacing. Thank you for watching.
@FarmhandHauling Жыл бұрын
@@ironore1866 I’ll be watching since I subscribed. This is more helpful than you know!
@robkentucky60892 жыл бұрын
Thanks for this video. Wow, great information to a first timer working on a mini-bus.
@ironore18662 жыл бұрын
Rob, Thank you for watching!
@steventriance8312 Жыл бұрын
Great Vid!
@ironore1866 Жыл бұрын
Thank you for watching!
@aj3284 Жыл бұрын
Good video. Thanks
@ironore1866 Жыл бұрын
Thank you for watching!
@sukhjindersingh8042 Жыл бұрын
Hey boss what is correct name for gear reducer and from where we van buy , i am looking for that from long time
@ironore1866 Жыл бұрын
Torque Multiplier Wrench, if you google it many will come up. Good luck!
@philipshih8653 Жыл бұрын
Need your advice I have same truck I need to remove one tire I’m thinking to buy the 1” air impact wrench What brand are you using # 2 I have a 29 gallon’s compressor from Harbor Freight I can retro fit with 1/2” air fitting Undecided which brand of 1” air impact wrench You are a strong man to lift that air tool
@ironore186611 ай бұрын
You need a large line coming off of your tank to make the big impact work properly. The one I use is an inexpensive one from ebay. Definitely don't get one with the trigger where it is on mine.
@mikestirewalt5193 Жыл бұрын
Can anyone think of a reason why I can't put 19.5 wheels on this NPR? Anyone recommend a source for 19.5 wheels with holes to match the NPR hub? Thanks.
@romo009able Жыл бұрын
Where can I buy the lugs studs?
@ironore1866 Жыл бұрын
i have bought them in the past and just got them from the Isuzu dealer.
@thegoldenlikethisword4642 жыл бұрын
i have a mitsubishi fuso and i tried to get the die to remove the tires do you know what it is called or where i can get it greetings
@ironore18662 жыл бұрын
I believe there is a link below
@jennifermaulding71532 жыл бұрын
There is not a link, that is what I am looking for as well.
@ironore18662 жыл бұрын
@@jennifermaulding7153 Than you for the heads up. Ill add a link.
@thomaspannell91622 жыл бұрын
What size are the lug nuts
@ironore18662 жыл бұрын
Hi Thomas, watch the end of the vid. It has the lug size and some other tips.
@sleeping_underwater_53293 жыл бұрын
Would you happen to have the part number for the socket you're using or what is it called ?
@ironore18663 жыл бұрын
I'll take a look tomorrow
@ironore18663 жыл бұрын
This is a less expensive option than the Japanese one
@sleeping_underwater_53293 жыл бұрын
@@ironore1866 hey what type of impact gun is that and is it neccessary to remove the lugs. I have a 1/2 in Milwaukee brushless fuel and the front one came off fine but the rears are a bit more difficult. Is it my impact gun or just the lugs that are stuck on tight
@ironore18663 жыл бұрын
@@sleeping_underwater_5329 I think I would go with the torque multiplier first. The large impact needs a big compressor and a large hose.
@peruano083 жыл бұрын
What size is your air compressor? How many pounds of air or what model of air compressor do you use?
@gundam1463 жыл бұрын
Can someone share the tire size/details. Thanks
@ironore18663 жыл бұрын
These tires are 16 inch, but your tire size should be listed in the drivers door jam or just to the left of your head when you are sitting in the drivers seat.
@slabdaddyoutdoorstvchannel2435 Жыл бұрын
so on the left rear side would i turn right to loose, like the driver side?
@ironore1866 Жыл бұрын
Right side has regular threads left side has reverse threads. Make sure you check the ends of the studs for R or L in case someone has replaced them with the wrong studs in the past.