Removing Rust/Paint/Algae/Slime off this Dutch barge, Repainting Narrowboat Restoration SandBlasting
Рет қаралды 669,498
Жыл бұрынRemoving Rust and paint so this dutch barge can be restored! if you enjoyed the video press the like and drop a comment would be nice to hear from you I read every comment and try to reply to everyone 😊
Please be kind and respect the fact these videos are a hobby for me if you want to see more content press the subscribe and ding the bell then you will be notified of my next uploads see what els I blast.
As always thanks for watching much appreciated!
Hard doing for easy viewing :)
If you are a blaster and require help please drop me a message on here. Please don't email or call asking for advice on how to set up or operate your Rig. I need to prioritise my free time doing work calls, emails and quote enquiries. I will always try to respond to comments on my videos :)
kind Regards
Mick Blackley Sandblaster
MobileBlasting.co.uk
M.Blackleys.MobileShotBlasting
@boatlover2296 Ай бұрын
That hull looked remarkably good
@Mobileblaster Ай бұрын
Yeah this was in good shape 😊👌👍
@VenturiLife 8 күн бұрын
Paint and bottomcoat did it's job I suppose.
@KASIH3103 2 ай бұрын
I just knew we were going to see some barnacles being blown to smithereens based on your intro video 😢 Alas, it was not to be. It was another finely executed job showing your skill and expertise. We remain faithful in believing our wish will manifest in the none to distant future.
@Mobileblaster 2 ай бұрын
😊👌👍
@garymonsarratt6048 9 ай бұрын
That was a big job for one guy. You made it look easy.
@Mobileblaster 9 ай бұрын
😏😊👍👌
@cstar2839 28 күн бұрын
Very satisfying and therapeutic to watch. 🙂
@Mobileblaster 28 күн бұрын
Glad you enjoyed it 😊👌👍
@trumanhw 5 ай бұрын
Man, it's crazy how perfect it left it. Great work.
@Mobileblaster 5 ай бұрын
😊👌👍
@ThePorridgeGobbler Ай бұрын
That was very therapeutic watching you strip back that hull. 😁
@Mobileblaster Ай бұрын
😊👌👍 glad you enjoyed it
@aaronplumb8373 2 ай бұрын
Hey brother ,cool video , great work ,I also blast and am a fabricator /welder from Alberta Canada 🇨🇦 👍🏻 keep Crushing bro, God Bless 🙏🏻
@Mobileblaster 2 ай бұрын
😊👌👍
@glennchapman5337 11 ай бұрын
That's mint, lovely job.
@Mobileblaster 11 ай бұрын
Thanks 😊
@andrzejporeda7281 4 ай бұрын
Super jeszcze wypiaskowany Pozdrawiam serdecznie. 👍👍👍👍👍👍👍
@Mobileblaster 4 ай бұрын
😊👌👍
@HughzieTube Жыл бұрын
Always love the end of the boat videos for the ''While you're here, can you just...'' bits to appear! Only seems to happen on boat videos though! lol
@Mobileblaster 11 ай бұрын
It happens on nearly every job I will start and film more of em 😂😬 can you just...
@irod23 3 ай бұрын
Amazing job, I would be interested on seeing more of this refurbish!
@Mobileblaster 3 ай бұрын
😊👍
@MikeWilliams-yp9kl Жыл бұрын
Great job looks like a new boat ❤
@Mobileblaster 11 ай бұрын
Thank you 😊
@phenogen8125 Жыл бұрын
Looks like they timed the blast and repaint to perfection; before the (epoxy) paint breakdown and loss of steel. Lot of berthed time for those young barnacles but a big resulting slip.Great job.
@Mobileblaster 11 ай бұрын
It came up real nice 👌
@picklepee2771 8 ай бұрын
I work in Newport News Shipbuilding and yup, you're correct. Better to blast and spray BEFORE the paint coating breaks down.
@acsberean4092 4 ай бұрын
Awesome! I could use a sandblaster in my kids room.
@Mobileblaster 4 ай бұрын
😂
@newblast6169 Жыл бұрын
Very nice job, amazing you got that done in one day!
@Mobileblaster 11 ай бұрын
Yeah it was close to using all the media I tuck like so close I was on my last pot 😂
@nicksmith2468 3 ай бұрын
You made it look easy...again great job
@Mobileblaster 3 ай бұрын
😊👌👍
@ianlitchfield9273 6 ай бұрын
Who wanted to see more of the underside being blasted 👍
@Mobileblaster 6 ай бұрын
I have videos of the base plate been blasted 👍
@eaglybeagly 5 ай бұрын
The most efficient use of blast media and effective profile creation is with an orbital motion at the nozzle.
@eaglybeagly 5 ай бұрын
Just saying.
@frankkreyssig7626 Ай бұрын
Not enough room for the camera and him to work.
@powerofone1645 5 ай бұрын
Strangely satisfying to watch.
@Mobileblaster 5 ай бұрын
😊👍👌
@louischannel7008 4 ай бұрын
Very satisfying to do, I was a sandblaster for 6 years in my 20 ‘s. NZ lytleton dry dock.
@chinolopez572 3 ай бұрын
You should do a video about the machine you used. Thanks. And nice job by the way
@Mobileblaster 3 ай бұрын
😊👌👍
@leetheriderforlife7548 11 ай бұрын
Done a good job 👏👏 would like to see it finished in paint 👍
@Mobileblaster 11 ай бұрын
Thankyou 😊🫡👍 unfortunately I'm never about when it comes to paint I perfer to stay clear of the putting it back on stages haha
@paulf2529 Жыл бұрын
That came up very well, a big old boat compared to a normal canal boat.
@Mobileblaster 11 ай бұрын
Yeah I did wonder if I could complete when I sported the size 😆
@dacat8171 9 ай бұрын
Beautiful 👍🏾
@Mobileblaster 9 ай бұрын
😊👌👍
@SonofChurchill Жыл бұрын
New safety working well 😁
@Mobileblaster 11 ай бұрын
😬😆
@Local_Boydidgood 11 ай бұрын
Love the video. If I've told my students once, a thousand times;edges 1st. Wish I could use this on the boats I see. Neat to watch. Lee
@Mobileblaster 11 ай бұрын
Thank you 😊 I will be honest I always seam to do the edges 1st and don't have a real answer as to why just feels like the right thing to do 😬
@bigbadboodah Жыл бұрын
Great job!!!!!
@Mobileblaster Жыл бұрын
Thank you 😊
@joeroad6618 Жыл бұрын
nice job Mick, looks like that new compressor is really working good for ya.
@Mobileblaster Жыл бұрын
Thank you 😊 yeah I'm more and more happy with the purchase as every job gets done just need about 5 years worth of work now to pay for it 😂
@bur23 Жыл бұрын
Дорогу осилит идущий✊
@ianhowe8823 Жыл бұрын
Did you use a more aggressive media on this one, as I notice the grey floor and less dust like there normally is with the recycle glass. Perfect finish for paint , great job Mick. Oh and where do the wheels fit on the barge🤣
@MegaBait1616 7 ай бұрын
Nice job and wish ya good luck....... from North Carolina USA.
@Mobileblaster 7 ай бұрын
Thank you 😊 welcome to the blast hood 🙂
@scottkenzig5144 Жыл бұрын
Crickey mate that was so good to watch 👍👌🇭🇲🇬🇧
@Mobileblaster 11 ай бұрын
😊👌👍
@gpjansevanrensburg8113 Жыл бұрын
Really nice video, at least not as bad as the boat with the filler 👍
@Mobileblaster Жыл бұрын
Ya know when ya pull up as I don't have any info just that its a boat when I pulled up and spotted the size of it I was wishing the boat to blast was parked somewhere els haha turned out OK in the end glad it wasn't full of filler 🙏😆
@pa1264 5 ай бұрын
Great video nice job👍🙂
@Mobileblaster 5 ай бұрын
😊👍
@americanrambler4972 11 ай бұрын
By the way, that barge has a nice attractive looking hull. It has nice lines and shape to it. It looks like a proper vessel.
@Mobileblaster 11 ай бұрын
I thought it looked too big when I turned up 😂 surly that will struggle to fit down the UK canal system?
@americanrambler4972 11 ай бұрын
@@Mobileblaster it’s probably to wide and deep to fit down and through some of it where the canals and locks are only 7 feet wide.
@gdotone1 Жыл бұрын
very nice
@Mobileblaster 11 ай бұрын
Thank you 😊
@swampy1584 5 ай бұрын
Nice job you made it look easy
@Mobileblaster 5 ай бұрын
😊👍👌
@Junior-db2rl 7 күн бұрын
bc it is easy lol
@Mobileblaster 6 күн бұрын
Look forward to seen your videos 😏
@donnaarnault1472 11 ай бұрын
Thanks
@Mobileblaster 11 ай бұрын
Thank you I appreciate that 😊👌👍
@CenturyHomeProject 3 ай бұрын
There’s nothing better than watching a master artist practice their craft.
@Mobileblaster 3 ай бұрын
😊👍👌
@markfrederick6202 9 ай бұрын
Perfect job for someone with OCD lol but he is doing a beautiful job of it.
@Mobileblaster 9 ай бұрын
😬😊👌👍
@AbdulHafeez-cq6oo 2 ай бұрын
good job
@Mobileblaster 2 ай бұрын
Thank you 😊
@markbrooke4100 Жыл бұрын
Top job, looks the dogs bollocks 👍🙏
@Mobileblaster 11 ай бұрын
It did come up nice this 1 😊
@HanksWreckerService-hz7ks 11 ай бұрын
You make it look so easy! What CFM compressor do you run and how many PSI? That blast pattern looks fairly large
@Mobileblaster 11 ай бұрын
425 cfm @ 125psi :)
@Mattlawton-ft6ew 10 ай бұрын
@@Mobileblasterbrilliant I need one 👍
@jmacdonald4681 5 ай бұрын
This is a nice little set up. When larger vessels are done with multiple blasters we'll use double or triple the air volume at similar pressures. Sandblasting is the fun part. Painting sucks until its all done and looks pretty lol
@johnmitchell5351 4 ай бұрын
Hey mick a good run of work there ,I used to blast and paint on the gas holders ,there was 2 of us would spend a couple of hours under the hood and then a quick clean up and prime paint , the good thing about blasting is no other prep work before paint and it looked good as well
@americanrambler4972 11 ай бұрын
What becomes of the blast media you use on the job? Is it one and done, or is the media recovered, cleaned and reused? Or can it be used for other tasks? That looks like a fair amount of left over stuff to just send to a land fill with no other applicable use.
@Mobileblaster 11 ай бұрын
Once and done for me it's oready a waste product finding another use it comes from the ground they processes it get what they want from it then bag this for us to purchase
@jeffdunstan 4 ай бұрын
very interesting video. im a spraypainter but ive never sand blasted before. Is it difficult to hold the hose with all that pressure?? im going to be at a job that does blasting and painting. any advice you can give is appreiated
@Mobileblaster 4 ай бұрын
Its not as simple as these videos make out 👍
@americanrambler4972 11 ай бұрын
Do you return and blast the areas obscured by the blocking holding the barge in place?
@Mobileblaster 11 ай бұрын
No it's not so bad of area to hit with a sander if they wanted it doing 😊
@vrodkris 9 ай бұрын
Here is NACE Level 3 inspector notes : 1) Scrape all Barnacles and loose growth off the hull first 2) Pressure wash the hull fresh potable water @ 3000 PSI 3) Now you are ready to blast, Remember prior to coating application to test steel hull with a CSN test kit or a the least use a Kittagwa tube. For Soluble Salts. Should be no more than 3 PPM soluble salts. The CSN tests for chlorides,Sulfates,Nitrates. Blasting all the marine Growth and unwashed hull contaminates into the steel is not recommended as it imbeds in the steel and painting over it is a major cause of coating failure. Any coating Data sheet should outline this ,and prior to work commencing should be reviewed with coating applicators.
@Mobileblaster 9 ай бұрын
My job sheet says prepare the serface to SA2 I always try for SA2.5 or better then the rest is upto the painters 👍
@benachiesween 7 ай бұрын
The steel hull of my 35ft ex RN harbour launch was sand/gritblasted 10 years ago. The dust was incredible. What system is this?
@Mobileblaster 7 ай бұрын
Probably the same system but an operator that's paying for the media not a worker that's not interested in optimization 😂👍 some people think more media is faster I believe letting the air do the work 😎👌 the is a sweet spot too lean and your diesel bill will be on the high side or too rich and your media will be eaten up too quick
@George-hl3qj 3 ай бұрын
Hello my friend. What kind of sand-blasting medium did you use? Another question, is it possible or cost-effective to collect or save the sand again? I think is not possible like when you work in a workshop.
@Mobileblaster 3 ай бұрын
Crushed glass or iron silicate I believe this was iron silicate. It would be possible but eat up a lot of time my idea was im hear to blast so I try and do as much blasting as possible and collecting media would make the job a lot longer
@artnautica1 8 ай бұрын
Well done.!! Surprisingly little dust is created when you are biasting. Is it because of the blasting material?
@Mobileblaster 8 ай бұрын
More likely that I'm the 1 paying for the media so I try to only use what I need 😬👍👌
@bruceintas 4 ай бұрын
If it was small and easy, they would di it themselves. My grandad came out of Barnsley and complained about everything. I'm from Australia.
@Mobileblaster 4 ай бұрын
😂👌👍 I have friends in Wauchope 😊
@bundles987 9 ай бұрын
Just outta curiosity what happens to all that stuff you blasted off that ended up in the floor? Are you responsible for sweeping it up or do they do it once they are finished repainting it?
@Mobileblaster 9 ай бұрын
I have a contract with the boat yard they take care of the clean up 👍
@willem3690 9 ай бұрын
Everybody can see that the paint can easily flush away, and disappear in the nature. It’s a little sad.
@Mobileblaster 9 ай бұрын
@@willem3690 it's a little sad to even think that's what happens I have a deal with the boat yard I blast they clean up
@earlwright9715 11 ай бұрын
Oddly satisfying ! So that was a canal boat?
@Mobileblaster 11 ай бұрын
😊👍👌 yeah apparently so seems more like a ship to me haha
@lancpudn Жыл бұрын
R'reet Mick, Big buggers them Dutch barges eh! Are they restricted as to where they can go on the canals & rivers? How long have they got to treat/paint it before it starts to flash rust again. Great job as always mate.
@Mobileblaster Жыл бұрын
I'm not sure about the canal systems I think they can go almost everywhere the narrow 1s do but I'm unsure to be fair. Depending on the humidity it could last weeks like that even months but my advice is get atlases some primer over it as soon as possible usually the next day 👍 some days if I can get done in a reasonable time frame the lads stop over to get a coat onit the same day but I think this was painted the following day
@chriscars3578 11 ай бұрын
Great job done again mick 👍👍👍
@Mobileblaster 11 ай бұрын
Thank you 😊 👍👌
@koloros-cacak 3 ай бұрын
Well done. What abrasive did you use?
@Mobileblaster 3 ай бұрын
Iron silicate 👌👍
@TheAstraeuss 11 ай бұрын
I'm surprised you didn't prep i.e. cover the windows. You weren't afraid of hitting the glass? What did you use as your blast media? Sand, glass? Thanks, I blast log homes mostly.
@Mobileblaster 11 ай бұрын
I don't prep the windows I'm confident I won't hit them. Media was crushed glass
@TheAstraeuss 11 ай бұрын
@@Mobileblaster Cool, thanks for the reply. Looks great by the way.
@Mobileblaster 11 ай бұрын
@@TheAstraeuss turned out nice 😊👌👍
@mussim2919 Ай бұрын
Is that a torch blaster or sandblaster? It was fun watching the video.
@Mobileblaster Ай бұрын
Sandblaster 👌👍
@robb5834 9 ай бұрын
Like see vid painting it
@Mobileblaster 9 ай бұрын
I'm never about when they paint them unfortunately
@DEmma1972 Жыл бұрын
Lovely example of a Dutch barge cargo conversion (replica). Did any of the barnacles hit your mask?
@Mobileblaster 11 ай бұрын
Haha they messed it up and ruined the pov shots I had so I tried a little faster but longer time-lapse what you think good speed?
@DEmma1972 11 ай бұрын
@@Mobileblaster Speeded up, the job looks quick and easy. A good mix showing how long each section takes and then an overall sped up version is perfect
@Mobileblaster 11 ай бұрын
@DEmma1972 😊 it was hard on this 1 because I forgot my battery bank and the gopro batteries don't last very long I nearly filmed it all 😂 just a shame the pov I did get the lense got covered 🫣
@billkea7224 8 ай бұрын
I thought the UK had banned sand for blasting. I love your setup. I hope that is supplied air you are using.
@Mobileblaster 8 ай бұрын
Yeah its been banned since the 60s I only use approved medias the media I used hear was iron silicate (silica free) yeah I filled air from the compressor its grade D air poor air but better than neet air from a Compressor as thats not breathable
@MegaBait1616 7 ай бұрын
Question : why would sand blasting be banned ?? I know they have crazy laws and rules like paying for watching TV, anti-guns, heavily taxed, arrested for posting on the net, ect. but sand blasting ?? thanks be well.
@Mobileblaster 7 ай бұрын
@MegaBait1616 yeah to use as a media as its got free sillica (sillica sand/kiln dry sand) tests was done and they found its a lead course for silicosis its best just to use approved media's that way they can tax us properly on the media instead of sweeping up some grit off the ground and siving the dirt and using free media 😂
@peterwestgrove 11 ай бұрын
Nice to hear the voice of someone from 'home'... I'm curious, have you considered using a laser? Or is it too expensive?
@Mobileblaster 11 ай бұрын
😊👌👍 yeah I've looked into these and the costs involved plus the cut rate is super slow the technology isn't quite ready to rival a sandblaster even if it did do a similar job to a blaster the energy needed wouldn't make it feesable just yet. I believe it will be the future but not for a good time yet 👍
@jackdbur 11 ай бұрын
A laser doesn't provide a profile for your paint to grip to media blasting makes a rough surface for paint to get maximum adhesion to the steel
@mohamadqaqyysh8909 4 ай бұрын
اعمل بهاذا المجال منذ ثلاثون عام
@Mobileblaster 4 ай бұрын
👌👍
@garyguild8907 11 ай бұрын
Nice work Mick ,you never mentioned how long it took buddy
@Mobileblaster 11 ай бұрын
It was done in the shift well just under 8 hour 👍
@chriseccles1454 11 ай бұрын
Bang tidy 🎉 why the wheels 😅
@Mobileblaster 11 ай бұрын
@@chriseccles1454 😂 we have to keep roiling somehow haha just a tiny can you just.... haha
@devinovaa 6 ай бұрын
Out of curiosity, is this kind of work taxing on the hands/body? My husband just started this line of work with no experience and said his hands felt horrible after the 8hr shift of doing this.
@usih3 Ай бұрын
Good day, would it be possible to see some Before/After shots you pointed out during your initial walk through?
@Mobileblaster Ай бұрын
Something I will make note of on future videos 👌👍thankyou
@usih3 Ай бұрын
You don't know much that will be appreciated. We know it's gone but I for one would like to see a little before and after if your video time permits.
@Confettish1 22 күн бұрын
How much time do you have to apply primer before rust starts showing up?
@Mobileblaster 22 күн бұрын
If its kept dry week months even years but it would need to stay dry and in a climate controlled area for humidity its best to coat it straight away or as soon as possible for best results 👌👍
@Moh4n95 Жыл бұрын
Hey Mick quick question don't never had that feeling when see a or started a job that looks fun to or easy do doing and while during the job you immediately regrets to taken that job on and you can't backing out the job anymore of it ? 😂
@Mobileblaster Жыл бұрын
Loads of jobs when I 1st started out but since making them mistakes I don't fall for them again 😆 I've been at this game for some years and taken on alsorts of jobs looking back knowing what I know now some I should have walked well away from haha
@Moh4n95 Жыл бұрын
@@Mobileblaster yes i know but if you don't make the mistakes you never learn anything about it plus this the way to become a pro in something if you don't take risks or willing to trying something you won't achieve things in life avoid mistakes that you can don't make them purpose 😆
@mikepalm6452 7 ай бұрын
Mick i just wondered how come it does not start going to start rusting before you get any primer on the metal...
@Mobileblaster 7 ай бұрын
Depending on the humidity and if you can keep the steel dry it will last days even weeks before flash rusting appears I've had an old lambretta frame sitting in the unit for almost a year and it was still fine obviously the type of metal plays a part in this as cast iron flash rusts near instantly after blasting with very little humidity. But rolled steel seams to have a good resistance to flash rusting
@marllontosi Жыл бұрын
Boa noite Mick , qual abraaivo você usa ... vejo q nao faz pó. parabéns pelos vídeos 👍
@Mobileblaster 11 ай бұрын
Iron silicate on this job. Thank you 😊
@marllontosi 11 ай бұрын
😊 quantos kilos de material você gastou nesse serviço Mick ...
@marllontosi 11 ай бұрын
Mick qual material você gosto mais de usar nos trabalhos... eu trabalho com jateamento abrasivo umido , mais tô vendo muito os seus vídeos e tô querendo mudar para o processo a seco .... e gostaria da sua ajuda e poder tirar mais duvidas 😀 , desde já agradeço a atenção.
@Mobileblaster 11 ай бұрын
It was around 18x 25kgs bags so 450/500kgs if memory serves could have been less. I really like crushed glass it's cheap and fast cut. Iron silicate is 2nd choice only reason been its slightly faster cut and a deeper profile but in my opinion not worth dubble the money per bag only on really the odd jobs or if I have some left over and Im trying to keep stock fresh 👍
@marllontosi 11 ай бұрын
poxa tem um rendimento muito bom mesmo, quero agradecer sua atenção e vou continuar acompanhando seu trabalho, um abração meu amigo Mick ... sucesso e fique com Deus 🙏🙏🙏🙏
@stevedelaney5652 Жыл бұрын
What nozzle are you using? Thx
@Mobileblaster 11 ай бұрын
850xl 👍
@ryanwerleman1646 9 ай бұрын
gaan ze meteen der over verven of spuiten primer meschien ?
@Mobileblaster 9 ай бұрын
Yeah normally they get some primer on the same day or following day 👌👍
@iandamianluciferwilson7385 11 ай бұрын
Great job. How long did the job take Mick. Cheers.
@Mobileblaster 11 ай бұрын
I was done in the shift around 7 hour
@iandamianluciferwilson7385 11 ай бұрын
@@Mobileblaster that's grafting. As my old dad used to say.
@Mobileblaster 11 ай бұрын
@@iandamianluciferwilson7385 that's without stopping for dinner etc I like to plod on faster I get the job done the faster I can go home 😏
@jmacdonald4681 5 ай бұрын
Do you ever need to prewash anything? typically any grease or oil substances would be solvent cleaned prior to blasting to avoid embedding the oil into the steal causing adhesion issues later on.
@Mobileblaster 5 ай бұрын
It would help but not essential as the blaster will remove most to all of anything on the serface
@pw601 7 ай бұрын
I'm curious about the rudder, very different to a normal canal boat , doesn't look very hydrodynamic. Is there a reason for it's form?
@Mobileblaster 7 ай бұрын
I don't have a clue 😂
@tonymccaffrey9025 9 ай бұрын
is there much difference between the power plus nozzle and standard nozzle? I've got 400 cfm thanks 👍
@Mobileblaster 9 ай бұрын
Yes definitely worth the investment and I like to see a different when I spend money but you will find it hard to find the 950 needed for 400cfm I've got the 850 and the next hit is 1050 ya need 500cfm I believe for that. Don't fall for the sales pitch of they add power that's bolx but they do add reach well they keep the cone tighter for longer so it will feel more power as the overspray is reduced and the hotspot is hotter 👌👍 they add about ft extra reach compared to a standard nosel
@tonymccaffrey9025 9 ай бұрын
@@Mobileblaster thanks Brother i think I'll go for it. keep up the good work 💪
@Mobileblaster 9 ай бұрын
@tonymccaffrey9025 I pick the XL over every other nosel I've got Hopefully you will like it as much as me 😊👍
@samirsbairamovs7994 Жыл бұрын
Hello Mick!Haw difficult learn sandblasting and haw much need money for start Thanks
@Mobileblaster 11 ай бұрын
Well alot of verbals at play with that question depends on what line of work you want to learn this will determine how much you need to spend if your going to buy new or 2nd hand etc
@RJ-nh9hw 11 ай бұрын
What type of media are you using?
@Mobileblaster 11 ай бұрын
I cannot remember off the top of my head it would have been eva crushed glass or iron silicate 👍
@darrenlewis4423 7 ай бұрын
What size nozzle are you useing? How many Kgs per hour do you get through? Cheers.
@Mobileblaster 7 ай бұрын
850 #8 and aprox 75kgs per hour
@gregmach8230 11 ай бұрын
Did you etch the glass any.
@Mobileblaster 11 ай бұрын
Glass? I wasn't near any 👌👍
@andotschannel3014 Ай бұрын
what power do you use
@Mobileblaster Ай бұрын
Compressed air 425cfm at 125psi 👍
@danieldavis322 11 ай бұрын
What for grit are you Using
@Mobileblaster 11 ай бұрын
Iron silicate fine 👍
@route66detailinglondon18 4 ай бұрын
@mick blackley is there anyway I can join you for a 1 day experience? I've always wanted to do this, I'm from London
@Mobileblaster 4 ай бұрын
Unfortunately it would be a nightmare for my accountant as I would have to put you on my books to make sure your insured etc and I will be honest you won't pickup enough info up in just 1 day these videos do make it look easy so please take what you will from them but alot is going off that's not shown 👍
@Marc-ft1xh 2 ай бұрын
Where is all that sand going...and can it be recovered or is it too fine?
@Mobileblaster 2 ай бұрын
It gets disposed of at the end of the process. It could be reused but I choose not to just to keep good speed 👌
@iankynaston-richards5239 11 ай бұрын
Which yard was it? I'm Yorkshire and looking for someone to do mine.
@Mobileblaster 11 ай бұрын
Thorne Doncaster 👍 please send business enquiries to info@mobileblasting.co.uk
@hottamaleboy1198 Жыл бұрын
How long did that take you to complete 😢
@Mobileblaster 11 ай бұрын
It was done within the day 👍
@simonthorneycroft1339 11 ай бұрын
So is it yourself or the customer who gets landed with cleaning up the site afterwards?
@Mobileblaster 11 ай бұрын
Neither 😂 the Dock owner dose the clean up 😎 we have a nice agreement 🤝
@armantanzairiand Жыл бұрын
😀👍🍺
@Mobileblaster Жыл бұрын
😊👌👍
@sefketsar2707 7 ай бұрын
HANGİ ÜLKE SÖYLİYEBİLİRMİSİNİZ , BEN DE BU İŞİ YAPIYORUM , YUNANİSTANDAN SELÂMLAR...
@Mobileblaster 7 ай бұрын
England 👌👍
@jamesteasley5493 8 ай бұрын
Maybe you can help duo vagari with their rusty barge with history dating back to 1910
@Mobileblaster 8 ай бұрын
I just watched their progress they really need a Sandblaster for sure 👌😊
@naignildoi826 6 ай бұрын
how many hours work was that?
@Mobileblaster 6 ай бұрын
Around 7 hour I think 👍
@mons-fe9fw Ай бұрын
How mutch did the sand cost for this job?
@Mobileblaster Ай бұрын
Sorry I've forgotten
@user-zr2eg3bk2j Ай бұрын
How many hours dis this take?
@Mobileblaster Ай бұрын
I cannot remember off the top of my head 👍
@yachticus 7 ай бұрын
how long can you leave it before you have to stick a sealing cover (like chromate primer ) over it
@Mobileblaster 7 ай бұрын
That would depend on how dry you can keep it also the humidity levels I've had a boat half blasted for weeks out side in the rain and it only needed patch blasting to bing it back
@yachticus 7 ай бұрын
thanks Mick - so very much local environment - I thought there might have been an issue with it flashing as you might get with mild steel (untreated)- thanks@@Mobileblaster
@Mobileblaster 7 ай бұрын
@yachticus yeah any mild steel will last a decent amount of time if it can be kept dry boats are no different if the get wet they will flash rust but it's not a big problem looks bad but the tea staining really isn't hard to remove can be done with chemicals or even acid primers some say leave to flash rust so they adhere properly
@nicksonintai1938 10 ай бұрын
Hi..how do you price your work and can we see your blasting set up?
@Mobileblaster 10 ай бұрын
I work out how much my rig is costing then I add a labour charge I can live on and feed my family that's how I work my pricing out. 👍
@nicksonintai1938 10 ай бұрын
@@Mobileblaster what grit are you using? I see not much dust in the air. We are here using GMA garnet and normally a lot of dust produce
@Mobileblaster 10 ай бұрын
@@nicksonintai1938 iron silicate 👍
@nicksonintai1938 10 ай бұрын
Okay..thanks for the sharing. Must be a good grit. Minimal dust and I see it is easy for you to work alone. Here I need at least 1 pax to stand by the blasting pot because the garnet is always stuck in the pot and does not flow smoothly. By the way, we are doing work in South East Asia. Glad to have seen your videos.
@Mobileblaster 10 ай бұрын
@nicksonintai1938 scrap the extra man and use dry filtered media much better flow 👍
@konsul2006 7 ай бұрын
This is an amazing technique, but has to be so boring to do. This task would be the perfect one (static) for a robot!!!
@Mobileblaster 7 ай бұрын
yeah it is but a static robot would over blast or not blast enough plus they are very expensive and still need a operator to make sure its doing as it should. I have an ability to be able to switch off and have my head in another space :) haha
@konsul2006 7 ай бұрын
@@MobileblasterRespect to that! As with any craftsmen, thank you for your service! :)
@Mobileblaster 7 ай бұрын
@@konsul2006 👌👍
@Rust.Converter.Primer.Coating 8 ай бұрын
Nice work i am manufacturing Rust Blocker if you are intrested that will be best for ships.
@Mobileblaster 8 ай бұрын
Do you supply inhibitors?
@matthewcarter9374 11 ай бұрын
How much media did this job take?
@Mobileblaster 11 ай бұрын
I cannot remember off the top of my head I would load the van with 800kgs on the hopes I would be bringing most of it back but some do take alot of media 👍
@turbodog99 11 ай бұрын
@@Mobileblasterhow much diesel?
@Mobileblaster 11 ай бұрын
@turbodog99 near 250L
@MJJCvideo 5 ай бұрын
@Mick Blackley SandBlaster Good video of Removing Rust,may I know if it's ok for you to review our foam cannon S V3.0?Thanks a lot in advance!☺
@Mobileblaster 5 ай бұрын
Not sure a foam cannon would fit the type of videos I make thanks.
@MJJCvideo 5 ай бұрын
May I know the type of your video?@@Mobileblaster
@Mobileblaster 5 ай бұрын
@@MJJCvideo the name of the videos and the channel kinda give that away 🫣😂 if that's still not enough I'm a sandblasting channel I tend not to use foam cannons 👍
@MJJCvideo 5 ай бұрын
Ok dear!Thanks so much!☺@@Mobileblaster
@whoispriest 2 ай бұрын
Is this dustless or sand?
@Mobileblaster 2 ай бұрын
Crushed glass can be used dry or wet this was dry 👍
@whoispriest 2 ай бұрын
@@Mobileblaster How does somebody break into this industry?
@Mobileblaster 2 ай бұрын
@@whoispriest Same as you would with any other trade 👍
@robb5834 9 ай бұрын
Be hard paint
@Mobileblaster 9 ай бұрын
Not my department 😬😂
@bablibabli2205 3 ай бұрын
Hello friends
@Mobileblaster 3 ай бұрын
Hi 👋
@frankkreyssig7626 Ай бұрын
I think they should have put it a little lower to the ground.
@Mobileblaster Ай бұрын
It was OK 👌👍 putting it lower would mean rearranging the lending blocks that's bolted to the floor the is 3 different styles for different boats shapes and sizes so alot of work really
@telosfd Ай бұрын
New again. At 11:50 is en extra job?
@Mobileblaster Ай бұрын
Can you just job 😂👌👍
@techscrew2 8 ай бұрын
How many thousands would this cost?
@Mobileblaster 8 ай бұрын
For Business Enquiries Please Email Info@MobileBlasting.co.uk Regards Mick
Go Gizmo!
Рет қаралды 27 МЛН
GIRI ENTERPRISE
Рет қаралды 20 М.
CarChik
Рет қаралды 1,1 МЛН
Sailing Good, Bad, and Ugly
Рет қаралды 2,9 МЛН
Mick Blackley SandBlaster
Рет қаралды 67 М.