Removing the Rear Interior Door Panel on a Mercedes CLK C209 / W209 / A209

Рет қаралды 59,617

4 жыл бұрын

Dear viewer,
In this video I am showing how one can remove the rear interior paneling. Removing this paneling will be necessary in order to repair common issues, such as with the rear electric window regulator, which will cause the rear windows not to roll down, as well as fixing the annoying seat belt not retracting issues.
If you have any questions please leave a comment in the comment section below. If you liked the video and it was helpful to you please leave a like and consider subscribing.
Regards,
Endless MotorWorks Team
Also like us on Facebook: ENDLESSMotorWorks
Credits:
Music: / fredji-flying-high

Пікірлер: 52

@nidalfarahat362 Жыл бұрын

Thank you very much for detailed educational video. Because of your video I was able to change my regulator on my window and all what it cost me $15 for regulator repair kit . And now my other window regulator is broke down and I will be able to change it again with a very low cost. thank you thank you

@EndlessMotorWorks Жыл бұрын

I am very happy to hear that! Thank you for the kind words!

@allanoneill1023 3 жыл бұрын

brilliant work and much easier than a lot of others, well done

@EndlessMotorWorks 3 жыл бұрын

Many thanks!

@BloodScatter 4 жыл бұрын

Nice to see some more CLK stuff. Good video bro!

@EndlessMotorWorks 4 жыл бұрын

Thanks!

@haroldbell1246 4 жыл бұрын

I had the pleasure of watching 5 of your videos in a row - this one and the series of 4 on removing the interior trim in plus the preparation for installing a new single din stereo. I thought you did a fine job at explaining the procedure and providing us with quality videos. Thank you very much for the fine detail work.👍... Harry

@EndlessMotorWorks 4 жыл бұрын

Thank you for the kind words! :)

@wickbar1200 9 ай бұрын

Thank you so much for this. You had all the correct information and talked through everything perfectly.

@EndlessMotorWorks 9 ай бұрын

Glad it was helpful!

@shark70007000 2 жыл бұрын

Okay, mine is a 2008 clk350. So it's a little different. But this still helped me figure it out. Thank you.

@EndlessMotorWorks 2 жыл бұрын

Glad to hear it! :)

@padmika 2 жыл бұрын

Nicely explained...!!!

@EndlessMotorWorks 2 жыл бұрын

Thanks!

@e36328stroker 2 ай бұрын

Thank you so much !

@EndlessMotorWorks Ай бұрын

You're welcome!

@peace3345 Жыл бұрын

my man i want to kiss your eyes. Perfect tutuoril. You the John Wick Tutorial

@EndlessMotorWorks Жыл бұрын

Thanks!

@umuroski Жыл бұрын

Thanks for the info

@EndlessMotorWorks Жыл бұрын

Thanks for taking the time to leave a comment! :)

@nijannat8949 3 жыл бұрын

Very good!!!

@EndlessMotorWorks 3 жыл бұрын

Thanks!!!

@lukeduke9304 2 жыл бұрын

Thank you so much 👍👍

@EndlessMotorWorks 2 жыл бұрын

You're welcome!

@leobala3751 Жыл бұрын

Perfect 👍

@EndlessMotorWorks Жыл бұрын

Thanks!

@dmecklenburg 3 жыл бұрын

Very helpful video. Thank you. Question: If you continue by removing the extender, is the window regulator then an easy access?

@EndlessMotorWorks 3 жыл бұрын

Yes, it will be, but you will also need to remove the seatbelt entirely, as it is in the way.

@hightrackjimmy 2 жыл бұрын

Is this the same process for the 2006 clk500 convertible? I have a "click" just as the window starts to go down, but then it goes down fine. Great video thx.

@EndlessMotorWorks 2 жыл бұрын

Should be the same or very similar. Can't say a 100% though, as I haven't performed this my vehicle.

@3piont5for30 2 ай бұрын

If you have this problem AND an SRS warning light the most LIKELY issue is an expired SEATBELT BUCKLE SENSOR, 20 pound/25 dollars off ebay. One bolt, takes 5 minutes.

@Symbiote-Edits 3 жыл бұрын

hi is this the same for 2005 model 220 clk?

@EndlessMotorWorks 3 жыл бұрын

Yes, it is the same procedure

@Chris-yy5pj 3 жыл бұрын

Do you know if this process is the same for a Cabriolet?

@EndlessMotorWorks 3 жыл бұрын

As far as I know it is exactly the same.

@hoangtiendung6985 Жыл бұрын

thanks for the info

@EndlessMotorWorks Жыл бұрын

Thanks for taking the time to leave a comment!

@damionbaskin7149 Жыл бұрын

Seat belt arm is making a ticking noise when it comes out how to fix that it works but makes ticking sound

@EndlessMotorWorks Жыл бұрын

Most probably the mechanism itself needs some grease. it is, however, also possible that there are teeth missing in the little cog wheels.

@damionbaskin7149 Жыл бұрын

@@EndlessMotorWorks thanks for the response I will check it out thanks again

@dominator9833 2 жыл бұрын

My 06 CLK500 convertible has no such hook in the door panel and I can't find any video that shows anything similar, how am I meant to remove the panel???

@EndlessMotorWorks 2 жыл бұрын

Here you go, specifically for the convertible - kzfaq.info/get/bejne/nbiYdZl2ttO2kok.html

@keeponcruisin7876 2 жыл бұрын

Thanks for the upload. You're definitely not in Florida or you'd be in the shade.

@EndlessMotorWorks 2 жыл бұрын

Haha, true that! :D

@ericlee3421 2 жыл бұрын

The panel I’m trying to remove suddenly appears on the back seat?

@EndlessMotorWorks 2 жыл бұрын

Exactly. This is the magic of editing and a result of not having a tripod.

@matthewsmith8249 Жыл бұрын

Same for the C124?

@EndlessMotorWorks Жыл бұрын

I can't confirm if it is the same or not, as I have never taken apart a W124 chassis Mercedes.

@matthewsmith8249 Жыл бұрын

@@EndlessMotorWorks Thank you so much for your reply. I really appreciate it.

@Tahasatah 3 жыл бұрын

How do I put the panel back on😂?

@EndlessMotorWorks 3 жыл бұрын

The assembly process is the reverse of taking it out. The seat belt presenter needs to go through the opening on the panel first. Then you just align the top of the panel to the C pillar and to the metal ridge on the side. Push on it from the top a bit in order for it to sit in its place. Lastly, lock it in place with the plastic hook mechanism in the bottom.

@Tahasatah 3 жыл бұрын

@@EndlessMotorWorks I think I broke one of the plastic hooks but we good😩