Renault Clio (2009 - 2012) - Replace the timing belt

Рет қаралды 40,131

Күн бұрын

Do you need to replace the timing belt on your 2009 - 2012 Renault Clio but don't know where to start? This video tutorial shows you step-by-step how to do it!
Our Renault Clio manual covers both petrol, and diesel engines, and includes videos for some of the most common jobs, which you can see here in this playlist. Get the full manual haynes.com/en-gb/renault/clio...
What's covered:
Petrol:
Renault Clio 1.2L (1149cc) (2009 - 2012)Renault Clio 1.6L (1598cc) (2009 - 2012)Renault Clio 1.2L turbo (1149cc) (2009 - 2012)Renault Clio 1.6L turbo (1598cc) (2009 - 2012)
Diesel:
Renault Clio 1.5L (1461cc) (2009 - 2012)
Includes Hatchback and Estate (Sport Tourer)
Exclusions:
Does NOT cover 2.0 litre petrol models or Renaultsport versionsDoes NOT cover new Clio range introduced January 2013

Пікірлер: 30

@richardhodgkiss9741 3 жыл бұрын

Brilliant video, few extra steps that aren't required such as removing intake but other than that, fantastic

@HaynesManuals 3 жыл бұрын

Glad you liked it!

@silasrafael2594 2 жыл бұрын

I know im randomly asking but does any of you know of a trick to log back into an Instagram account..? I stupidly lost my login password. I would love any tricks you can offer me

@josearmando9640 2 жыл бұрын

@Silas Rafael Instablaster :)

@silasrafael2594 2 жыл бұрын

@Jose Armando Thanks so much for your reply. I got to the site on google and Im waiting for the hacking stuff atm. Looks like it's gonna take quite some time so I will get back to you later with my results.

@silasrafael2594 2 жыл бұрын

@Jose Armando it did the trick and I actually got access to my account again. I am so happy:D Thank you so much you really help me out!

@soundsofftheworld9376 2 жыл бұрын

But if you replace the water pump. do you also have to remove the coolant, that part I miss in the video.

@HaynesManuals 2 жыл бұрын

Yes, you should renew the coolant at the same time.

@lukaspodoba401 2 жыл бұрын

Hello, does this procedure apply for 2007 Clio 3 1.2 tce 100 engine? Thanks)

@HaynesManuals 2 жыл бұрын

No, it's for the models after 2009

@kazio3d Жыл бұрын

What wrench/ratchet/holder do You use for hold torx t50 bit? 2:06

@HaynesManuals Жыл бұрын

It depends on the Torx bit you're using. Ours had an 8mm shank, so we used an 8mm ring spanner.

@farerse Жыл бұрын

how do you tune the engine to 250 hp ?

@adambennett805 3 жыл бұрын

Is it possible to turn the engine to top dead centre before removing the crankshaft pulley? Then you could lock it with the drill bit and remove the crankshaft pulley that way rather than buy an extra tool

@HaynesManuals 3 жыл бұрын

Unfortunately, Renault insist that the drill bit isn't strong enough to hold the crank when removing the pulley - hence the need for the locking tool.

@agcobileboqwana9923 Жыл бұрын

I didn't have money to buy the special locking tools when changing my wife Clio 3, I used gold drill bits, no problems.

@luisk5582 Жыл бұрын

@@agcobileboqwana9923 What size did you used?

@agcobileboqwana9923 Жыл бұрын

@Luis K, it's an 8mm metal high speed drill bit.

@luisk5582 Жыл бұрын

@@agcobileboqwana9923 Thank you.

@ilvale6439 3 жыл бұрын

Why do you take off the intake inlet? It's not necessary

@HaynesManuals 3 жыл бұрын

There are often several ways of doing the same job. We've advised taking the inlet manifold off to make it easier to get the starter motor off. The starter has to come off so the flywheel can be pegged at the right place.

@ilvale6439 3 жыл бұрын

@@HaynesManuals I know that in this model there is an hole on the flywheel to lock the engine with a special locking pin

@nuraminmuliaamirsalleh8092 2 жыл бұрын

it's a standard operation procedure for more safety and it's an optional situation for every part of engine when we need to do it in certain cases. It's a complete guideline !.

@dillon1553 Жыл бұрын

Is there a locking tool for a renault clio iv 2017 ?

@HaynesManuals Жыл бұрын

The 1.5 DCI requires crank and cam sprocket locking pins, but the other engines in the range don't

@dillon1553 Жыл бұрын

@@HaynesManuals but there is something to lock the flywheel so that the bolt of the crank pulley can be un tighten pls ?

@HaynesManuals Жыл бұрын

No specific tool for the 1.5 DCI, but this is what's in the manual: 'The crankshaft pulley must now be removed. There is a small gap beneath the starter motor into which a screwdriver or similar tool can be jammed into the starter ring gear teeth. Note however that access to both the ring gear and the TDC timing plug (below the starter motor) is considerably easier if the starter motor is removed first.'