Renault F1 V10 - Engine Simulator - Launch Control

Renault F1 V10 - Engine Simulator - Launch Control - 20,000 RPM

Рет қаралды 184,909

Күн бұрын

Download : catalog.engine-sim.parts/part...
Took me a little while to figure this one out but from many scavenged sources from across this web, this engine should be pretty close to the real Renault RS25 V10. Hopefully the developer of Engine Simulator can figure out something to fix that weird audio aliasing! However, an F1 V10 always sounds good.
0:00 - Startup
0:14 - Slow motion
0:30 - Dyno pull
1:11 - Revving
1:32 - Launch and up shifting
1:44 - Down shifting
2:00 - Shutoff
f1 renault v10 10 cylinder high rpm 20000 launch control 2 step top speed 2005 formula

Пікірлер: 266

@DJSandmannTV Жыл бұрын

You can still hear some synthetic artifacts bit this one was by far the best and closest to reality I've seen from this software so far.

@asgark8156 Жыл бұрын

It's better with a higher frequency but you need a relatively powerful pc

@mahuba2553 Жыл бұрын

@@asgark8156 You need to strap an actual v12 to power a computer to get good results

@user2C47 Жыл бұрын

@@mahuba2553 And an i4 to run the water pump.

@GoWailord Жыл бұрын

The creator of the program only meant to do a single video showcasing a few engines he did up in it, but the reactions to it made him post it up for use even though it's VERY rudimentary and not user friendly. He's running a campaign now to clean it up and turn it into a real user-friendly tool/game/whatever you wanna call it if there is enough interest and donations.

@izhundrikov Жыл бұрын

yeah, audio antialiasing will do the trick

@lulkak2664 Жыл бұрын

Now make it play "God Save The Queen"

@lordofrims Жыл бұрын

Had the same idea lol

@brick4353 Жыл бұрын

That was poor choice of a song considering what just happened…

@lulkak2664 Жыл бұрын

@@brick4353 bruh

@Peter_Valoczi Жыл бұрын

@@brick4353 God save the king!

@IBS-IS-CRAP Жыл бұрын

did-not-age-well

@ydihtty Жыл бұрын

Nice work. I think the aliasing is due to the simulation frequency, maybe you could try increasing it if your hardware can handle it.

@judef Жыл бұрын

The aliasing can probably be fixed with a simple anti aliasing filter. Hoping for this to be addressed in an update, the aliasing really hurts the realism for me

@maxhuxtable3840 Жыл бұрын

hopefully theres an option to increase the audio samplerate to 96kHz or even 192kHz

@halophobic9550 Жыл бұрын

should that need a separate hardware audio processing thingy?

@KOTSR Жыл бұрын

@@halophobic9550 soundcard? no not by modern standards on a proper pc, maybe for a laptop though!

@halophobic9550 Жыл бұрын

@@KOTSR i mean, do you think that would need an optical audio port?

@ccettura6208 Жыл бұрын

Imagine using this simulator to create engine sounds for videogames, it's incredible!

@Unknown_T Жыл бұрын

I found this engine simulator while I was looking for some engine sounds to make my own game,u cant easily find a realistic looping engine sound but instead u can make it with this simulator:)

@GF-mf7ml 11 ай бұрын

BeamNG drive moders be like

@MjkL1337 11 ай бұрын

doesn't it need 80.000 fps to run tho?

@MikuAuahDark 10 ай бұрын

@@GF-mf7mlBeamNG do sponsor the development of the engine simulator.

@judef Жыл бұрын

20K also happens to be close to the Nyquist limit which explains the aliasing edit: I am dumb; it's rpm not rps

@blackbriarmead1966 Жыл бұрын

that's 20k rpm not rps. it should be 60 times below the limit

@judef Жыл бұрын

@@blackbriarmead1966 ah that's true I stand corrected, but the harmonics of the sound definitely are aliasing

@nakekygt954 Жыл бұрын

@@judef you should increase the engine simulation speed way above 10000 hz standard value.

@woobilicious. Жыл бұрын

You're still getting harmonics above the engine RPM 10x20k = 200k "pulses per second" + non perfect sine exhaust gas flow, you probably need 8x AA to get anything decent.

@FilipeDGuedes Жыл бұрын

@@woobilicious. Wouldn't it be 5x20k, since each cylinder only fire every other crank rotation? A V10 fires 5x per rotation

@hongthainguyen5334 Жыл бұрын

This one is absolutely brilliant, far better sounding than your previous V8 (although that can be the V10 bias)

@Ry____ Жыл бұрын

Love seeing how fast the cost goes up as the RPMs get closer to redline. Be nice to see a graph of that.

@hrishikeshpatil6962 Жыл бұрын

Those upshifts 😍😍

@OddStare Жыл бұрын

Down shifting the R F1 at this rate has to feel like a punch to the liver by gear shift

@snickspone3265 Жыл бұрын

Anything that revs higher than 11k scares the shit out of me. Its hard for me to fathom something moving so fast with such precision. and still staying intact.

@jacquiecotillard9699 Жыл бұрын

You might get a kick out of the trebuchet orbital launcher being developed in the US. I forget its official name but it’s a massive pressurized rotating arm that is designed to physically throw satellites and other payloads into orbit. Scary and very big and very fast

@pfazio Жыл бұрын

Again great stuff bro. Love the F1 content.

@balisong5386 9 ай бұрын

Perfect swap into my vacuum cleaner.

@Andrecio64 Жыл бұрын

You know your engine is a beast when it starts making sounds like cold war radios.

@paulyC Жыл бұрын

Now THIS, is what I've been waiting for!

@Cconstantinnee Жыл бұрын

this is so sick. actually one of the coolest things i've seen this year

@dannylopezcalderon7825 Жыл бұрын

I've been looking forward to this!

@Concodroid Жыл бұрын

Finally, a V10!

@toxicscope511 Жыл бұрын

Tbh, the only problem here is the actual software limitation Maybe in some next versions we can have the perfect F1 sound

@p_enta5012 Жыл бұрын

keep it up, this stuff is amazing!

@JuniorDjjrMixMods Жыл бұрын

Oh, this is a incredible project, keep it up.

@Litl_Skitl Жыл бұрын

Kinda sad now you there are no brakes here for the super quick downshifts.

@Casey_Schmidt Жыл бұрын

This is the coolest one yet

@barevids Жыл бұрын

This is super accurate sounding, nice!

@RedSkylinex60 Жыл бұрын

Didn't expect to see you here big up Sam!!!

@theo10008 Жыл бұрын

Finally, I was Waiting for this 😂😂

@christianadriandelarosagar7261 Жыл бұрын

before 9000 it sounds like an LFA. nice car

@EmptyCheetosBag Жыл бұрын

that’s because the LFA uses an f1-style engine developed by toyota and yamaha

@hooviedoovie5220 Жыл бұрын

@@EmptyCheetosBag LFA is not an "F1 style engine" it's very far from it, but the exhaust was tuned especially to highlight higher frequencies in the exhaust tone to sound like an F1 engine. Lamborghini uses a similar ideology while designing their exhausts as well.

@EmptyCheetosBag Жыл бұрын

@@hooviedoovie5220 cool i apparently misremembered things then

@gnrtx-36969 3 ай бұрын

@@EmptyCheetosBagit's not an f1 engine 🤦🏻‍♂️

@EmptyCheetosBag 3 ай бұрын

@@gnrtx-36969 sir i realized my mistake after the previous comment, maybe you should read the rest of the thread before commenting

@me262omlett Жыл бұрын

V10 were my favorite F1 engines.

@lorenzodicosmo2708 Жыл бұрын

I’m curious about the afr’s, it’s kinda strange that it stays pinned at 13.3, it seems kinda high, on lean side, and even off-throttle it stays at 13.3, i think it should go on the rich side going up in the rev range ant it would be very rich (probably 8,7 or even 6) off throttle putting lots of fuel in the chambers to cool down the pistons and the chambers themselves…

@clarkstonguy1065 Жыл бұрын

I like it, it does sound very cool. Although, I have never seen a Pressure versus Volume diagram that looked quite like that. I am kind of wondering if a sign might perhaps be backwards on the heat loss coefficient and on the exhuast valve timing too.

@bookle5829 Жыл бұрын

I think you already know that's not the correct firing order. But great work.

@wiegraf9009 Жыл бұрын

Hell yeah! So cool!

@jared338 Жыл бұрын

Why do I love this? Here we are.

@juutuub0 Жыл бұрын

this sounds really promising. which cpu do you have and was this the highest frequency you could handle?

@indica1895 Жыл бұрын

With the v10 my desktop build with an i7 8700k can handle no more than 8500hz. With smaller engines I can handle anything up to about 45khz. My laptop has a ryzen 9 5900hx, and I've managed to push that to about 60khz.

@jort93z Жыл бұрын

@@eeagle69 Did you not read their comment? "With the v10 my desktop build with an i7 8700k can handle no more than 8500hz. With smaller engines I can handle anything up to about 45khz" Ofc the engine matters.

@alexhndr Жыл бұрын

That Launch Control... *NUT*

@anthonylove6639 Жыл бұрын

Super cool!🫵🏻🤩🤩🤩

@danielburns7304 Жыл бұрын

any chance we can get a setup like this for older engines like that on the model T and early automobiles? it would be interesting to see the comparison.

@cancelhandles Жыл бұрын

It exists, just put in the effort to look for it. kzfaq.info/get/bejne/eNucjNqWqLGZd58.html

@hizkiakevin7005 Жыл бұрын

20k rpm is a beast

@ThatOneAgarAgarioThePro Жыл бұрын

Soooo coll and soo real

@code0662 Жыл бұрын

Can I make a request? I really really really really wanna hear a VQ37 engine in engine simulator! Do you think you could make it happen?

@32mace_ Жыл бұрын

I love how in the down right they even calculate money

@miguelsanchez4931 Жыл бұрын

BEST engine ever

@d9zirable Жыл бұрын

QUE GRANDE ERES MAGIC

@raimovt Жыл бұрын

🔥🔥🔥

@gyula6516 Жыл бұрын

The thing that suprised me the most is that somehow this app/program is maxing out my computer yet not using 100% of my gpu, cpu nor ram/vram? Is this an issue on my side or is it just not optimised quite yet to use all my pc resources? (I have an AMD build with cpu and gpu)

@kyles.herman5266 Жыл бұрын

Dude you just got a Like and Sub.

@junesgood8814 Жыл бұрын

top tier

@RDL1984 7 ай бұрын

Although these engines reach easily 20k rpm, probably all teams limited the rpm range to 18k-18,5k because the engine had to resist two GPs (2005 F1 Technical regulations)

@oscarl2370 Жыл бұрын

For some reason the game crashes for me with this engine. However I can see the engine for 2 seconds but then the game crashes

@KazuVii Жыл бұрын

Fuck me. Im getting goosebump from the sound

@fjandro9646 Жыл бұрын

Amazing

@circuitboarddudegaming5700 11 ай бұрын

shift from 7th to first going 226 mph, good things happen

@Shidokami 11 ай бұрын

Before Bocchi the rock: Damn what a V10 engine After Bocchi the rock: It's Bocchi The V10

@JohnUnsub Жыл бұрын

You should collab with an audio engineer to fine tune the sound profile, you're already getting some amazingly realistic sounds and you're basically two steps from selling your tech to game and movie studios without even taking the ICE simulation into account

@AngeTheGreat Жыл бұрын

You mean, selling *my tech?

@JohnUnsub Жыл бұрын

@@AngeTheGreat I'll be honest I saw the thumbnail and just assumed it was one of your videos

@JohnUnsub Жыл бұрын

@@AngeTheGreat I should definitely stop commenting on KZfaq while I'm drinking

@indica1895 Жыл бұрын

🤣 Be sure to check out Ange's YT, he's has a patron where you can support his work and get updates for a new version of Engine Simulator and access once it's in a playable state. Very hyped, personally.

@andresmartinezramos7513 Жыл бұрын

@@AngeTheGreat Maybe you could sell your tech for a nice profit. However we would all miss the open source nature of the software.

@F-Man Жыл бұрын

You gotta try to make an 036 V12 next!

@angush7294 Жыл бұрын

Adding reverb (even post production) to the sound should help mask some of the aliasing and add MUCH more realism. The aliasing is likely caused by sample rate and the audio latency of the simulation, an option to choose a higher buffer size should greatly reduce any audio artifacts.

@thromboid Жыл бұрын

IME, aliasing is something you have to prevent rather than try to remove after the fact. Oversampling and filtering within the simulation would be the way to go. I don't think the audio latency or buffer size would have any bearing on aliasing.

@cancelhandles Жыл бұрын

The simulator has an adjustable simulation frequency rate that takes a very powerful processor to turn up high. Especially on engines with many cylinders and high RPMs like this one.

@wolfmelonpan5858 Жыл бұрын

Could you make the Suzuki M13A engine? I'd be really curious to see it simulated, thanks

@MrAndreocity Жыл бұрын

How are your shifts so much better than mine? Are you smoothing out your inputs with space bar? Whenever I shift up my RPM's drop to ~14k and my acceleration is nowhere near yours. Thanks for the files btw

@RailsofForney 7 ай бұрын

*GAWD DAYUM*

@mitchellfuller2456 Жыл бұрын

awesome

@seralikethecar Жыл бұрын

Crazy firing order, just goes front to back of the engine?

@monkeyman1282 24 күн бұрын

Firing order: *YES*

@SnafuWT Жыл бұрын

sound is awesome. why does it sound like i'm watching a real f1 video lolol.

@cujbaion1 Жыл бұрын

I haven't seen never a expansion pressure like that 😲

@cri4921 Жыл бұрын

nice vid! maybe you should try doing the H16 engine which is basically the V8s stuck together

@user-ii6hq1bv7v Жыл бұрын

two flat 8s, not a v8

@chiki1256 Жыл бұрын

Could you can try to make a V9 engine please ?

@Ififitzisitz Жыл бұрын

Is that an idle of 5000 rpm I see? Wow!

@skypetical5763 Жыл бұрын

if you could, please, make a video on how to modify/make engines

@Todd_FIrefox95 Жыл бұрын

BRUH PEEPS ALREADY MASTERMINDS OF THIS

@jwalster9412 Жыл бұрын

Me and the Bois in automation: the car company tycoon game.

@welshfire7926 Жыл бұрын

Born genius

@Vudity Жыл бұрын

bro, the program doesn´t run and shows vulkan-1.dll error, how do i do?

@AmpSouthEAST Жыл бұрын

I'd love to hear a triumph daytona 675r or a yamaha mt-09, inline 3 cylinder

@prodkouki Жыл бұрын

hi indica its me phonkist

@madloudnoises Жыл бұрын

Can you make a Suzuki GSXR 750 engine?? That would be interesting to hear

@xDmakc 8 ай бұрын

3k rpm starter is insane

@chiefdenis Жыл бұрын

Okay, goddamn!

@Pro-xx2gr Жыл бұрын

you can emulate the McLaren MP4/4 engine?

@whiteknight1442 Жыл бұрын

what is that mutant otto cycle graph about ?

@critiqalerror Жыл бұрын

My sounds are bugged. They are choppy. Help?

@jm71681 Жыл бұрын

Could this engine be halved to see what an I5 F1 engine would sound like?

@doob3r Жыл бұрын

You gotta do the LFA next

@PanferriDPMO Жыл бұрын

Whats the keyboard shortcut for making the simulation slower and faster?

@nidoshardwar3465 Жыл бұрын

1, 2, 3, 4 etc.

@Patrick.Weightman Жыл бұрын

Ignition: *yes*

@milyan360 Жыл бұрын

Could you please simulate an MC14e engine?? Its a dohc 250cc 4 cylinder that also revs out to 20k (19500rpm officially? i think?)

@indica1895 Жыл бұрын

Hey, I'm working on a zx25r which is a 250cc 4 cylinder which revs out to 20k rpm.

@milyan360 Жыл бұрын

@@indica1895 hell yeaaahh, im keen to see that vid soon now. Thanks for ❤️❤️

@branco33 Жыл бұрын

Can I create any crazy engine there, or Just the one who we have in real life?

@jacksonjackson9015 Жыл бұрын

How do you do launch control. Is it something that is already set up when you download the link or do you have to do it yourself in notepad.

@zekeaffy9647 Жыл бұрын

Modded build

@guylarochelle9793 2 ай бұрын

I added the lines as described in other comments, but still doesn't work. public node main { set_engine(F1V10()) set_transmission(F1V10_transmission()) set_vehicle(F1V10_vehicle()) } " main() " Script failed to compile F1V10(490): Error unidentified token F1V10(494): Error unidentified token F1V10(2): Error could not open file Perhaps you should update the original file?