Fantastic! This is exactly the video I need. Thank you so much.

Your English is very clear, no problems.

Fantastic video. Mine is a clio from the same year as your Megane therefore it was quiet similar procedure. Saved me a lot of ££££. Thank you so much!!! And for those who look the issue, if plugged the OBD it comes with error B1002.

Same problem yesterday for me 😅thanks for ur videos..I have 2 megane mk 2&3.i need to sort out now mine.mot run out next week 😂😂😂280£ for fix my wage for 1month 😅😅😅stay safe sir..cheers 🏴󠁧󠁢󠁷󠁬󠁳󠁿

Big thank you buddy 👍 wouldn’t have been able to change mine today without this video ♥️♥️♥️

Dude... I have the exact same problem! 😁 Amazing video! 👏🏼👏🏼👏🏼🙏🏻

Thank you very much about this video. Its really useful for me.

Thank you for this Tutorial. It help's me very much to do this Work. Regart's : Hermann out Germany.

Excellent video Thank you so much. Only thing i would add is i had difficulty with was getting the inner part of steering wheel off. so whilst poking small screwdriver or allen key through the small hole at the back of the wheel to diissengage the inner spring bracket i also banged the inner part of the steering wheel down or up to release it

Good job, thanks for the info, have the same job to do on my clio.

Excellent video. Few things have to be mentioned though (some have been mentioned before): * mark steering wheel screw position with a pen, so you can screw it back to the same torque * don't unscrew the whole thing, only two stalk covers (each cover has two screws) on clockspring side and audio stalk screw * when replacing the clockspring part, go slow and make sure two rows of pins align with appropriate holes on the receiver * on the other side of the receiver you have to push away metal spring that contacts pins coming though holes * when screwing back stalk covers, make sure not to screw them too tight, or your stalks will be harder to move, and the turn signal stalk may not turn off at all, when steering * I suggest going on a test drive before you put the final covers on, so you can fine tune the screws, if needed Finally, I wonder how long will this cheap Chinese part last? I doesn't seem to be of good quality. Sometimes I can hear ribbon cable rubbing against itself when turning steering wheel. Maybe I should spray some silicon oil in the ribbon cable compartment?

many thanks, great video, my problem solved.

Unfortunately this video is NOT mentioning the marking of the steering wheel position before dismantling the main star screw and this will make it difficult to re align it on completion .

Perfect.Just one thing to add : You only need to unscrew the Torx screws on the clockspring side, the stalk side doesn't need to be unscrewed. Clockspring, Remote for the radio is all :)

Thanks very useful! :)

i brought the part with new stalks on it already for£50 i will try this

Thank you! Mentioning the torx sizes for all the screws would have been nice. I also noticed that the steering wheel alignment was not marked. but if you miss it once, you remember it next time.

Great job

The part is called a clock spring. If you turn the wheel and you hear clicks it means that it is on the way out. The airbag light is the sign you need to change it. I changed two in my Renault Megane 2006 sedan. I didn't do the repair as it looked too detailed so i went to the garage.

Thank you so much u saved me

Your English is great 👍

I love this

You are perfect 👌

Had the same issue with airbag and service lights. White airbag wire was cuted off.

@02:30 WD 40 ... hoping mines that problem Clio MK2 connector under the seat...

What is white warning light that looks like small cloud over two short lines ?

Would you please tell me the name of the part you replaced? Or any link that I can use to order it online. Thx

Great job! One question. On the new part there is an extra cable that isn’t on the original. Where does this go?

Hi, sorry to bother you, after watching your video I went ahead to buy the entire steering column switch but my question is what's the size of the torque bit you used for removing the steering wheel?

Anyone who is doing this. Check that the 7 long pins (5+2) on the back of the new part goes in to correct position. Mine went in wrong and bent everything. I still had the fault until I discovered this problem.

Thank you. I bought this part, but the problem is on my car I have 4 connectors and the part came with 5. My connecters are black, black, green and blue. The part came with an extra white connector. Still have the airbag light on.

Awsome video, my steering wheel is clicking when turning, sounds like clock spring is knackered, need to change before mot is up 2weeks?

What is this whole part called ?

Yea same here!

Where did you get the part from and what's it called

Hi from Denmark. You got a part-number? Thanks

Hi, i’ve done the rotating contactor replacement 1 time, the speed regulator is working again, but the airbag message is still on, and today i went through the whole installation again, double checked everything all connectors etc. I swear, everylittle things. All the installation is perfect. I even disconnected, cleaned and reconnected the seats connectors. But the airbag message is still on. I don’t understand. A mechanic told me that installation might be fine but i could still have to go through a elec diagnosis with the computer just to remove the alert message. So who do i trust ??

Can u put us a link to can buy one pls

I know this old but did you buy a Renault part or an aftermarket one from eBay?

Its the chair moving seat forward

Where did you buy that part from

To take off the cables in the first part, i need to disconnect the power battery?

Damn i put the new part on and now the steering is loose. And stalks not working

It will only go again. just put some resistors in place problem solved

I have this shitty car me too. created a lot of proplems. I have the same problem in the steering wheel and the airbag light is always on. When i bought it, the car didnt have al these problems. Is becoming a nightmare for me.

Пол машины разобрал, что бы касету снять )

god tutoriar..thanks....you engles is all soo god..not like my

Hi

So you don't need a computer to turn the light of a mechanic told me I did

I have Lenkrad Sensor Idiot have new,but Brocken contacts. Lot of time too find fool only luck we found proplem 😂 my english too Problem

Traducir a español

I have the same shit problem. I can't believe how everyone have this car that part is broken. Fuck Renault. Never again I will buy a Renault

Thank you very much about this video. Its really useful for me.