No video

Renault Trafic 1.9dci F9Q, Timing Belt Tensioning and Crankshaft Seal. Nissan, Vauxhall/Opel, Suzuki

  Рет қаралды 147,835

dave sterl

dave sterl

3 жыл бұрын

Renault Trafic II 1.9dci 100, F9Q, Nissan Primastar, Vauxhall Vivaro, Suzuki Grand Vitara
Find the items that are used on the Dave Sterl channel in the Amazon shop.
www.amazon.co.uk/shop/davesterl

Пікірлер: 102
@davesterl
@davesterl 3 жыл бұрын
Find the items that are used on the Dave Sterl channel in the Amazon shop. www.amazon.co.uk/shop/davesterl
@kevinpalmer7452
@kevinpalmer7452 3 жыл бұрын
Another quality repair there Dave I have one of those Gates sonic tension meters which I bought over ten years ago used it regularly at the time you inputted the gates belt no into the machine then held the microphone near the belt on its longest run then gave it a twang it has a traffic light system which when the tension was correct you get the green for ok can’t remember when I last used it not really needed now but a nice bit of kit anyway.
@greglaxy7810
@greglaxy7810 3 жыл бұрын
Brilliant information in your video. Going to do the belt on my trafic 1.9dci in the next couple of week. Defo be watching this video again a few times before I crack on 👍👍
@eldodos83
@eldodos83 3 жыл бұрын
Nice job as always Dave I have never done one on a 1.9 but done a few 1.5 dci belts was interesting to see the difference in the procedure
@ihousetraveldoomostartours6528
@ihousetraveldoomostartours6528 2 жыл бұрын
Dave you saved me today! Your video was super helpful and detailed as well. As a little simbol of grattitude I have liled and subscribed to your channel. Thanks bro!!!!!
@robsansom463
@robsansom463 3 ай бұрын
best youtube vid I have seen! thank you sooo much dave for your detailed and instructive advice...love the way you explain in plain language 👍
@homer1033
@homer1033 8 ай бұрын
Brilliant in depth video for the timing belt water pump etc, I've just bought a vivaro and this video makes it so so much easier to try yourself without the costly garage bills... Many thanks. ps just need to buy some pin alignment tools thank you Dave.
@kamikazeuk2434
@kamikazeuk2434 3 жыл бұрын
thanks for the vid. used it to help with my 1.9 vivaro. very infomative!
@CarsExposed
@CarsExposed 3 жыл бұрын
Top job As always Dave she’s ready for a lot more miles ahead, interesting way to tension the timing belt watching and learning here thank you very much 👍
@davesterl
@davesterl 3 жыл бұрын
Cheers Igor
@UnCivilEngineerIRL
@UnCivilEngineerIRL Жыл бұрын
Glad you put that up, sound as a bell ! From the Sunny South East.
@markholian3506
@markholian3506 3 жыл бұрын
Very informative and clear Dave - thanks for putting it all together 👍🏻
@davesterl
@davesterl 3 жыл бұрын
Glad you enjoyed it
@SMAutomotive
@SMAutomotive 3 жыл бұрын
Fantastic in depth job there Dave!
@davesterl
@davesterl 3 жыл бұрын
Cheers Simon
@martinflynn9790
@martinflynn9790 2 жыл бұрын
Brilliant video Dave
@iansworkshop
@iansworkshop 3 жыл бұрын
Brilliant Dave, got the video last night kept it to I finished my night shift this morning, really enjoyed the longer video , and as usual well explained and demonstrated mate 👍
@davesterl
@davesterl 3 жыл бұрын
Glad you enjoyed it
@MrGrogee
@MrGrogee 2 жыл бұрын
Thanks for this. Taking the mystery and nonsense out of what should be a simple procedure. Going to do my brother in law's van.
@The-JD
@The-JD 2 жыл бұрын
Excellent video....repeating many similar comments here, but thanks very much for taking the time to record and explain in great detail!
@davesterl
@davesterl 2 жыл бұрын
You're very welcome!
@louisdisbury9759
@louisdisbury9759 2 жыл бұрын
Fantastic video Dave I'm a technician myself and love watching other guys work, on my van after fitting a new timing belt the alternator clutch seized up broke the belt, and went under the cam cover and put the van out of timing, this was 6 months after so possibly worth fitting a new clutch to the alternator while replacing the belt.
@abdulmuqsittofie949
@abdulmuqsittofie949 11 ай бұрын
Did you bend any valves?
@HONMONSTER
@HONMONSTER 2 жыл бұрын
Brilliant video Dave Thank you great information
@trevormansfield6740
@trevormansfield6740 3 жыл бұрын
Very thorough explanation. Used your Amazon shop last week 👍
@davesterl
@davesterl 3 жыл бұрын
Awesome, thank you!
@paulrandall4484
@paulrandall4484 Жыл бұрын
Fantastic & informative video, well done chap.
@rickysequiera2446
@rickysequiera2446 2 жыл бұрын
Thanks for sharing Dave
@lidldidheknow4798
@lidldidheknow4798 16 күн бұрын
Great video!
@TheAussie2008
@TheAussie2008 2 жыл бұрын
Followed you video today to change the crankshaft seal and after doing the van I forgot about the tension moving the camshaft back one tooth so soon as I turn the key I knew it wasn't right so took it all back off and noticed the locking key you used was the silver one however that doesn't lock in and moves out of position and it's actually the black key which has a threaded end and screws into the engine hole. Anyway perfect video with good instructions and information cheers 🍻
@davesterl
@davesterl 2 жыл бұрын
Yes there are a couple of different types. Some fit into a slot in the crankshaft(silver pin) and some press against the crankshaft web and need to be screwed in. That's why there are different pins in the kit
@as-tm7np
@as-tm7np 2 жыл бұрын
Helped me on my volvo v40. I ended up not being able to reach the locking hole though, so I marked off the pulleys and tried my hardest not to turn them. It's not so bad if your belt also has timing marks
@simonsherwood7169
@simonsherwood7169 3 жыл бұрын
Nice job ,some brilliant simple ideas and tips 👍
@davesterl
@davesterl 3 жыл бұрын
Thanks! 👍
@stuungar3390
@stuungar3390 2 жыл бұрын
Great video, perfectly explained thanks
@TheGibby3340
@TheGibby3340 3 жыл бұрын
Some great details. Cheers Dave 👍
@davesterl
@davesterl 3 жыл бұрын
Cheers Ian
@Mercy1976
@Mercy1976 3 жыл бұрын
thanks for the video mate
@cidercecil
@cidercecil Жыл бұрын
Great guide, thank you so much 😊
@mobilrz
@mobilrz 3 жыл бұрын
Top video Dave. That old timing belt was ready to go.
@davesterl
@davesterl 3 жыл бұрын
It sure is
@Atu.890
@Atu.890 2 жыл бұрын
Très bonne vidéo très bien expliqué et bien filmer Merci a vous pour le partage de votre travail 👍
@davesterl
@davesterl 2 жыл бұрын
merci
@scotspie501douglas7
@scotspie501douglas7 Жыл бұрын
love your video so so honest
@funv3188
@funv3188 2 жыл бұрын
Verry well explained, experience talks👌 That Hz vs Nm tool hack was great :) Belt will play Mozart Symphony now 😂😂😂
@johnfittis5764
@johnfittis5764 3 жыл бұрын
Fantastic detail on an important job to get right👍 just not over the moon about stripping half the van apart to get to it 🤣 it seems like most jobs on these vans require the front off🙈 more complicated if the van has Air Con I suspect.
@Chris-oo2td
@Chris-oo2td Жыл бұрын
Super informative video
@davidsstfarrelltighe
@davidsstfarrelltighe 3 жыл бұрын
Dave another great vid I belive that device ya torque to 11nm is to remove slop from the belt I'm fair sure a few tugs on the belt would do the same and I'm gunna seal your idea with the tensioning by using the hertz app were meant to use a similar device in work for tightening timing belts on machines but it's allways missing
@dannybartlett4225
@dannybartlett4225 2 жыл бұрын
By the flying sandals of hermes thank you for this video mucka rebuilt the head and had to set the timeing and with no wee marks i was like rgt okay ya wanna play games do ye ffs pulling my where and tear out until finding this wee beauty top video 😀
@davidrichardson8934
@davidrichardson8934 2 жыл бұрын
Great wee vid thanks enjoyed watching that way to download car app thanks again
@the_retired_mechanic
@the_retired_mechanic 3 жыл бұрын
Dave when installing the crank seal i use a thin feeler gauge and gently push and move it around the crank to feed the seal onto the shaft. Just another technique and works with some seals. Hope this helps someone
@davesterl
@davesterl 3 жыл бұрын
Good tip, I'll remember that one
@jcon416
@jcon416 3 жыл бұрын
Great watch 👍🏻
@davesterl
@davesterl 3 жыл бұрын
Thank you 👍
@simonrawle7885
@simonrawle7885 3 жыл бұрын
lol i took a water pump off a matiz last year with tippex makes on the water pump . never seen a timed water pump before
@MXUK94
@MXUK94 5 ай бұрын
Wicked video mate very in depth enjoyed it 😎👍 what app did you use for the HZ meter?
@TheBoatmad
@TheBoatmad 8 ай бұрын
Great video, loved the detail and explanation. I need to do my head gasket, water in the oil and feels like the engine is partially locked up when starting? Bit of moisture in the cylinder? Second good battery hooked up got her started. ...... Wish me luck. Anybody know the torque settings and pattern?
@sidekickbob7227
@sidekickbob7227 Жыл бұрын
Excellent video! I don't understand why the pre-tensioner are necessary? Shouldn't the belt get correct tension as long as the frequenzy is as described?
@davet9900
@davet9900 5 ай бұрын
thanks for your video. If i mark the tension out now on the cogs, does that mean a new belt can be fitted if the old one snaps? will marking out like you have done prevent a write off or huge cost?
@MrSeagoon2
@MrSeagoon2 3 жыл бұрын
Hi Dave, a great video thats helped me a lot, but im finding it hard to get the spares IE the belts theres 2 on my renault ones for the timing and ones for the alternator and air con also I cannot find the tensioner and water pump kit, do you have any advice?? Regards Dave
@nickwoolf7977
@nickwoolf7977 Жыл бұрын
Hi you don't happen. To remember the name of the app that you used for the timing belt adjustment do you? Many thanks Nick
@iansonnyblack2624
@iansonnyblack2624 3 жыл бұрын
Wasnt eurocarparts that ya got the radiator from was it? Had this problem few time there.. Usually someone else's returned box the sell back on.
@TheWuzyy
@TheWuzyy 3 жыл бұрын
Can you check the frequency one year after the instalment to see if the pre-owner did it right?
@TheAussie2008
@TheAussie2008 3 жыл бұрын
Please can you tell me what the electric plug is on top timing belt side of the engine mine has a snapped wire also I seem to be missing a fuel shut off switch. Any help would be appreciated I'm currently watching this video while Changing my crankshaft pulley seal 👌
@Atu.890
@Atu.890 2 жыл бұрын
bravo pretty working can tell me please sir how many kilometers you are changing the distribution couroi and what years and your van thank you in advance i will subscribe to your channel greetings see you soon on your channel
@Mario-fq1mh
@Mario-fq1mh Жыл бұрын
Dave, greetings. I am interested in a detail. Did you remove the crankshaft pulley by hand or did you have to use a puller? Thx.
@petersheenan3273
@petersheenan3273 3 жыл бұрын
Excellent video Dave......some serious tips there....every day is a school day.......just out of curiosity whats your opinion on using locktite on the tensioner nut and crankshaft bolt and are ya tempted to put a spanner on the tensioner nut after youve torqued it or is it only me that does that....thanks
@davesterl
@davesterl 3 жыл бұрын
No, i have faith in the torque spec
@samuelseviour8944
@samuelseviour8944 3 жыл бұрын
Hello my belt snapped while driving..... Im going to fit one and see if im lucky, what should i be expecting to happen when i turn the key after timing and manually turning the engine two revaluations?
@lewisjenkins1114
@lewisjenkins1114 3 жыл бұрын
Doing one of these belts as we speak but having a lot of trouble getting the belt on! I've got the lines on the belt lined up properly, tried getting it on in different pulley orders but it just seems as though it's too small (even though it's not), am I doing something wrong? Tensioner is all the way off too 🤔
@petar443
@petar443 16 күн бұрын
Hello. Is this use solid flywheel? Or is it dual mass flywheel?
@superjob7816
@superjob7816 Жыл бұрын
Alright bud wen the Crank pin is in duz it stop the Crank moving both ways cheers
@control5835
@control5835 Жыл бұрын
How many pounds/foot for main tensioner bolt please? Also crank bolt?
@leolmo8744
@leolmo8744 3 жыл бұрын
hello, if I don't have the pin to block the crankshaft, I can use something similar, do you have the size of the pin?
@damianpiotr7865
@damianpiotr7865 6 ай бұрын
what is the name of this application, what do you do, measure belt tension
@Sloby-ie6zr
@Sloby-ie6zr 7 ай бұрын
Can't i just tighten the tensioner until i get 85 hz?
@apostolshinelov6689
@apostolshinelov6689 2 жыл бұрын
To insert new oil seal Just insert crancshft sproket opposite and tight to push oil seal in.
@davesterl
@davesterl 2 жыл бұрын
I would not advise that on this design. The inner part of the seal will flip
@thomasadmiral3401
@thomasadmiral3401 2 жыл бұрын
Can you tell me the diameter of the fixing tool? thanks !!!
@filipek7553
@filipek7553 2 жыл бұрын
Good video, but what about small pieces of drilled metal?
@davesterl
@davesterl 2 жыл бұрын
What pieces of metal?
@jonjono5873
@jonjono5873 Жыл бұрын
I have done around 50 if these belts easy belt to do
@arpadsimon4246
@arpadsimon4246 2 жыл бұрын
Megszámoljuk a fogakat a a sját jelölésünkkel, rátenni a másik szíjjat ... csak jó lehet.... nem kell a sok misztikum!
@davesterl
@davesterl 2 жыл бұрын
You can do it whatever way you want. I show the way you are supposed to do it
@nathanjamesprouse2769
@nathanjamesprouse2769 3 жыл бұрын
Hi could u tell me the name of app struggling to find it on I phone many thanks
@davesterl
@davesterl 3 жыл бұрын
i show it at 45:07
@valcic1993
@valcic1993 3 жыл бұрын
All front parts need to remove?
@dareklewandowski8176
@dareklewandowski8176 2 жыл бұрын
No.
@johnhall3827
@johnhall3827 3 жыл бұрын
I thought that degrees was a daft idea but tuning it . In a workshop or outside ? good luck on that .
@davesterl
@davesterl 3 жыл бұрын
Degrees? What you on about?
@johnhall3827
@johnhall3827 3 жыл бұрын
@@davesterl After torcing them down on a lot of vehicles you use degrees to turn to the right amount or have you not replaced old belts on cars and vans ?
@davesterl
@davesterl 3 жыл бұрын
@@johnhall3827 are you on drugs?
@johnhall3827
@johnhall3827 3 жыл бұрын
@@davesterl Did not explain clearly i am used to self ticheners and gauges you put on the belt . The thought of using a tuning fork in a noisy environment is pointless . The degrees i mentioned was to tighten the tensioner and other bolts . Hope this explains it better .
@davesterl
@davesterl 3 жыл бұрын
Yes, it is not clear what you are saying due to the poor grammar and misspelling of your posts. I will answer your questions, the meter is reading frequency in hertz not decibels. I think you are confusing the two. I have changed hundreds of timing belts and chains on an array of makes and models of cars and vans. If you wish you can check some of them out on my channel in the playlists. You might learn something instead of posting insolent comments
@user-mb1dz3lj8w
@user-mb1dz3lj8w 10 ай бұрын
Tars
@arpadsimon4246
@arpadsimon4246 2 жыл бұрын
Milyen nyelven beszél a fazon?
@davesterl
@davesterl 2 жыл бұрын
different language to you
@arpadsimon4246
@arpadsimon4246 2 жыл бұрын
@@davesterl Hungary, Magyar,
@gdfggggg
@gdfggggg 2 жыл бұрын
Spok
@davidharvey8812
@davidharvey8812 Жыл бұрын
Christ no wonder it’s 50 mins long. More adverts than the qvc channel. I couldn’t sit through it 🤦🏼‍♂️
@davesterl
@davesterl Жыл бұрын
Oh dear, how sad
1.9 disel Renault odpala ciężko??? Tu masz podpowiedź co i jak .
7:28
MechanikwNorwegii
Рет қаралды 46 М.
لقد سرقت حلوى القطن بشكل خفي لأصنع مصاصة🤫😎
00:33
Cool Tool SHORTS Arabic
Рет қаралды 30 МЛН
I'm Excited To see If Kelly Can Meet This Challenge!
00:16
Mini Katana
Рет қаралды 32 МЛН
Son ❤️ #shorts by Leisi Show
00:41
Leisi Show
Рет қаралды 10 МЛН
Замена и метки  ремня грм Рено Трафик 1.9 dci
14:53
Ремонт Автомобилей VGARAZE_RU
Рет қаралды 455 М.
Wymiana rozrządu Renault Megane Scenic 2 1.9 dCi 2004r
7:07
Garażowe Historie
Рет қаралды 25 М.
Wymiana paska rozrządu na przykładzie Renault Mégane II 1.9 dci F9Q
12:52
Bosch Automotive Polska
Рет қаралды 65 М.
Distribution sur moteur Démontée 1.9 DCI 131ch ( Montage )
31:29
Atout Méca
Рет қаралды 106 М.
Instrukcja wymiany rozrządu megane 1.9 dci 110km
26:12
WARSZTATOWE HISTORIE
Рет қаралды 36 М.
Cómo montar la distribución del motor F9Q
22:45
Mecanica y mas
Рет қаралды 30 М.
لقد سرقت حلوى القطن بشكل خفي لأصنع مصاصة🤫😎
00:33
Cool Tool SHORTS Arabic
Рет қаралды 30 МЛН