Reolink makes cool stuff - Argus 4 Pro and Home Hub

Рет қаралды 5,913

Күн бұрын

Home Hub:
Amazon - amzn.to/4b59t0D
Reolink Site - reolink.com/product/reolink-h...
Argus 4 Pro:
Amazon - amzn.to/4cigIDd
Reolink Site - reolink.com/product/argus-4-p...
-------------------------------------------------------------------------------------------
🛒 Amazon Shop - www.amazon.com/shop/raidowl
👕 Merch - www.raidowlstore.com
🔥 Check out today's best deals from Newegg: howl.me/clshD8fv8xj
-------------------------------------------------------------------------------------------
Join the Discord: / discord
Become a Channel Member!
/ @raidowl
Support the channel on:
Patreon - / raidowl
Discord - bit.ly/3J53xYs
Paypal - bit.ly/3Fcrs5V
My Hardware:
Intel 13900k - amzn.to/3Z6CGSY
Samsung 980 2TB - amzn.to/3myEa85
Logitech G513 - amzn.to/3sPS6yv
Logitech G703 - shop-links.co/cgVV8GQizYq
WD Ultrastar 12TB - amzn.to/3EvOPXc
My Studio Equipment:
Sony FX3 - shop-links.co/cgVV8HHF3mX / amzn.to/3qq4Jxl
Sony 24mm 1.4 GM -
Tascam DR-40x Audio Recorder - shop-links.co/cgVV8G3Xt0e
Rode NTG4+ Mic - amzn.to/3JuElLs
Atmos NinjaV - amzn.to/3Hi0ue1
Godox SL150 Light - amzn.to/3Es0Qg3
links.hostowl.net/
0:00 Intro
0:54 Who are these for?
1:20 Reolink Home Hub
3:34 Reolink Argus 4 Pro
5:30 Real world use/quality
8:22 But theres an issue...kinda
8:58 So are these any good?
9:42 Conclusion

Пікірлер: 60

@lifefromscratch2818 Ай бұрын

I really enjoy these videos that fit nicely between "I bought my entire homelab off temu" and "Supermicro sent over a new Epyc server with a pile of CM7's". This stuff looks like a solid choice for my mom to watch her sheep.

@TMoneyJones Ай бұрын

The dedication to the bit for putting jam on a Wi-Fi router is top-tier content

@RaidOwl Ай бұрын

Tasted delicious

@elminster8149 Ай бұрын

If you're going to mock people, make sure you have visuals! 🤣

@tedev Ай бұрын

lovely yard. everything you need to relax

@l0gic23 Ай бұрын

Hows the privacy policy?

@HolyOllie Ай бұрын

last time i got a hub solution it wasnt so selfhosted and the camera and ai service was publicly accessible by url.. never again

@NightHawkATL Ай бұрын

I really like my Reolink cameras! I have some wifi indoor devices and some Argus outdoor bullet cams. Looking forward to adding an NVR once I get PoE cameras to replace the Argus cams and use those for something else further out.

@impy1980 Ай бұрын

If you have a NAS, no need to go full PoE, I run both PoE and wifi Reolinks and record to my QNAP NAS. If you don't wanna spend on a NAS get a used Dell or Lenovo ThinClient 8th or 9th Gen Intel micro PC and run either Blue Iris or Frigate. HardwareHaven runs his cameras recordings on Frigate on a used mini PC.

@scottjasher Ай бұрын

Can you do 24/7 recording to the two sd cards like you can to a nvr?

@Mikeee503 Ай бұрын

The home hub has pretty small compatibility list so older POE cameras like my RLC-510a don't appear to work with it. Bit of a disappointment, but their 36-camera NVR is still pretty cheap as long as you already have a POE switch

@dspamers 8 күн бұрын

Is it possible to share NVR or hub access to another user and exclude one or two cameras from them? For example, the second user has NVR/hub access, but can only see cameras 1, 2 & 3, but cannot see 4, 5 & 6.

@MacroTh3ory Ай бұрын

So if using the Hub, are the cameras (scenario 1) connecting to the hub via a WiFi signal the Hub is producing similar to how Arlo is doing with some of their hub required cameras? Or scenario 2, the cameras and the hub are just on the same subnet. Being that the hub is Ethernet on the same subnet or vlan that the camera is connected to via WiFi?

@RaidOwl Ай бұрын

Scenario 1

@michelnolet4082 29 күн бұрын

My concern is Argus 3 ultra does not have RTSP but is compatible with the hub. And the Hub has it. Will the hub be seen or supported with BlueIris? In the Argus 4 FAQ, this is what Reolink says : RTSP is supported by using Reolink Home Hub.

@jaygreentree4394 Ай бұрын

Anyone else think the argus looks kind of like ET?

@nemisis282 Ай бұрын

Do you know if you can save recordings to both an in camera sd card and the home hub sd card at the same time

@RaidOwl Ай бұрын

Yes you can

@impy1980 Ай бұрын

Regardless of the NVR solution used for recording, as long as there's an SD card in the camera it will record to that. Whatever other device is connected to the camera is just pulling the video feed, then independently recording that feed. Also if you open the Reolink app on a PC, phone or tablet and tap record, it will also record the video feed it is receiving. There's no reason the hub shouldn't just behave as any other independent device receiving a video feed.

@impy1980 Ай бұрын

I'd have liked to see a 2.5" or NVME easy install panel on the hub given how flaky SD cards can be with low endurance rates, but other than that, I think the hub is a great addition to Reolink's lineup for the average non tech home user. I think Reolink have found a nice balance, where there products are open enough some people can go full self hosted with no cloud and won't be locked it for the pleasure, while offering an easy eco system and cloud service for those who aren't tech savvy. I personally have my Reolink cameras integrated into Home Assistant for casual monitoring, and record to my QNAP TS-464 NAS using QPVR Pro (8 free licences unlike Synology's BS), I have motion step up, where it records 10 seconds before motion and 60 seconds after. Camera's have been flawless, had to manually wipe the QPVR storage space once due to a bug in a QNAP update where it stopped over writing when full, since then not encountered that bug. Overall reliable setup and out of all the CCTV brands out there Reolink currently offer the best of everything without forcing people into cloud BS.

@RaidOwl Ай бұрын

Yeah dual 2.5” bays would have be awesome for the Hub…maybe in version 2

@NicholasIzzo-yq2me Ай бұрын

Can the argus 4 pro record to both a local SD card installed in the camera and to the SD card in the hub at the same time? Also the argus 4 pro highlights wifi 6 capabilities however the new hub is only 2.4 and 5 GHz, correct? So if you get the hub you wouldn't be utilizing the wifi 6 capabilities, is the correct? And lastly if I have wifi mesh for expanded wifi coverage this wouldn't really matter if I use the hub because the cameras connect directly to the hub right? Or do the cams connect to your wifi network through any various satellite wifi nodes and then get routed to the hub? Thank you

@RaidOwl Ай бұрын

Yeah it can record to both. Also, wifi 6 is 5ghz, wifi6e is the one on the 6Ghz band. The cams can connect direct to the hub or your existing wifi network, whichever is easier.

@NicholasIzzo-yq2me Ай бұрын

@@RaidOwl great, man thanks for the quick reply. So if I have a mesh wifi 6 setup I could connect some cams to the network via a mesh node (if the signal from the hub doesn't reach) and other cams directly to the hub? And all the footage will get routed to the hub whether directly connected or via a mesh node?

@impy1980 Ай бұрын

@RaidOwl Ай бұрын

Yep, that’ll work perfectly fine

@AlL-fw2cy Ай бұрын

I'm interested in a Reolink system. Will both the Hub, WiFi NVR and wired NVR work with WiFi cameras? Can these devices connect to the WiFi cameras via my Unifi access points or do the cameras need to be within range of the Hub/NVR? I'm looking to record locally to the camera as well as a Hub/NVR.

@RaidOwl Ай бұрын

NVR won’t work with battery powered cams but will for other WiFi cams. The cams will work the same way if you connect to Hub WiFi or your unifi.

@AlL-fw2cy Ай бұрын

@@RaidOwl Thanks for the fast reply! BTW I'm not really sure how it works but can you combine a Hub and NVR on the same reolink account? So that it merges cameras connected to both the Hub and NVR? Wondering if I can use the NVR for wired cameras and the Hub for battery cameras without having to log into 2 Reolink accounts on the app.

@RaidOwl Ай бұрын

Yep that also works and exactly how I had mine set up.

@What_s_Neu Ай бұрын

I say this with love.. who eats red raspberry?!? lol Like what do you put it on?

@RaidOwl Ай бұрын

Idk my wife bought that. I’m a strawberry boy

@travis_smartley Ай бұрын

Did I catch a Spaceballs reference?

@suneelkanuri Ай бұрын

The Home Hub is a disappointment. It is not fully baked. When used with battery powered (backed by solar) cameras the network is super slow that I ended up not removing them. The WIFI signal coming out of the device is super weak and useless when used to connect to cameras. One trick I learned while wasting a full day on it is you can connect your cameras to your home wifi and then connect those cameras (as soon as they show up in the network) to the home hub. While this is a ton better than connecting to the wifi points on home hub, accessing the camera from hub is not great either. It stutters and gets stuck constantly. While the same camera on same home network, while not connected to home hub is excellent. Of course, not using a home hub you lose the advantage of backing up your recordings to a secure place and the encryption. But you can definitely configure FTP on your individual cameras to back them up. I just wish it is more reliable and provide a better experience. I wait for the firmware updates as I want it to work.

@kevinnewton8945 Ай бұрын

Promo code doesn't work

@oakfig Ай бұрын

Does reolink app work on Linux?

@RaidOwl Ай бұрын

Not that I know of

@bragenr Ай бұрын

It does not.. I recommend to just set up a Windows VM for allowing the web server and then doing everything from the browser

@impy1980 Ай бұрын

No, only Windows, MacOS, also iOS/Android. However because Reolink cameras are IP Cameras and ONVIF compliant, any IP camera software can receive the video feed, some allow PTZ functionality, and also will record. There's plenty of IP Camera software for Linux, but having never used any on Linux you'll need to search and do some research. But having no Reolink app isn't a barrier, if I do look at my feeds on Windows I use QNAP's NVR Windows client coz it also shows my what the NAS has recorded, but I can still do all the PTZ controls in QNAP's client without opening the Reolink app on a device. The only real time I used the Reolink app was on my phone on initial setup of the cameras.

@emiellr Ай бұрын

Look, I'm not here to scare you, but rainbolt probably now knows where you live down to the address

@emiellr Ай бұрын

Btw, I've been eyeing the Reolink eco for a hot minute, but I don't want to have it be done over internet. Is that easy with Reolink or is the internet required?

@RaidOwl Ай бұрын

Lmao I think that every time I make a video showing even a blade of grass 😅

@ageranger1541 Ай бұрын

All my wifi cameras are mounted outside please don't tell me I have to pull them all down and scan them to add?

@RaidOwl Ай бұрын

Nah you scan them before

@AlL-fw2cy Ай бұрын

Maybe start taking pictures of the back of all of your cameras and organizing then in google docs or something so if you need to scan them you can just scan your computer monitor and not have to worry about physically accessing your cameras.

@RaidOwl Ай бұрын

After you scan them it downloads a copy to your device which is cool

@Jetta4TDIR Ай бұрын

How are Reolink regarding selling to 3rd parties?

@RaidOwl Ай бұрын

They say they don’t but what do I know 🤷🏻‍♂️

@Jetta4TDIR Ай бұрын

@@RaidOwl im looking for kit that i can self host all of these types of companies lock everything up behind their hardware its hard to find the right kit.

@RaidOwl Ай бұрын

You can use reolink cameras with a self hosted system like blue iris

@MrSephkeene Ай бұрын

@@RaidOwl or Frigate!

@Jetta4TDIR Ай бұрын

@@RaidOwl oh wow, thanks for that info op i did not kno that