Repair Bricked Modern MTK SoC Devices Using SP Flashtool (New Method 2021)

Рет қаралды 31,951

3 жыл бұрын

In this tutorial we are going to Repair MT6771 Chipset.from being hard bricked (no charge, no recovery, no fastboot) using SP Flashtool.with the help of Bypass Utility "MTK-bypass" to disable bootrom protection(sla and daa). MTK-bypass credits to @fawazahmed0, @chaosmaster and @xyzz on github and xda-developers.
(Note: This method is applicable to any MTK devices with SoC mt6735, mt6750, mt6765, mt6771, mt6785, mt8127, mt8163, mt8173, mt8695)
This method can also FIX the following problems:
• Soft Brick
• Bootloop
• FRP Locked
• Google Account Locked
• IMEI Null
• Baseband unkown
• Pattern Problem
• Pin Problem
Requirements:
• Python (if you are using windows 10, Download and Install Python 3.9 through Microsoft Store)
• libusb-win32 sourceforge.net/projects/libu...
• Sp Flashtool spflashtool.com/download/SP_F...
• Bypass Utility mega.nz/file/0JogWQLZ#v_ObF_z...
• Your MTK Device Firmware (with Scatter-file)
Latest Oppo, Realme, Xiaomi etc. with modern MTK SoC devices that are Hard bricked is imposible to repair using Third party Flashtool nowadays, because of the secured bootrom and that sucks!!, However there are developers developed a utility that can bypass the bootrom of the latest MTK SoC which we can use to easily Flash the orginal firmware of any supported SoC through Third Party Flashtool like (SP Flashtool).
Oppo and Realme has MSMDownloadTool and DownloadTool that we need a credit in able to use the those tools. Now we dont need them anymore. How? Watch The full video..
if you have OPPO and REALME devices and this method won't work to your device mabe it is not yet supported by the Bypass Utility (you can visit the latest build at github:github.com/MTK-bypass ) and you have no choice other than Flashing it Using OPPO's MSM and DownloadTool which you need at least 1 credit with username and password to Flash and Repair your device.
im also selling credits $10 per 1 credit. payment first through paypal. Contact me @ Whatsapp: +639166380887
All the tools and utility used in this Video are not mine. credits to the developer.
ATDC from the Philippines
for more visit may page @ forum.xda-developers.com/m/at...

Пікірлер: 193

@aimusicalcovers 9 ай бұрын

only video that worked, i have been looking for solutions for weeks and in that process i have watched 100's of videos to no avail. one video made my soft brick to hard brick, yours is the only one that works without issues.

@crack_channel Жыл бұрын

thank you brother. I searched for this problem since yesterday. I just got it in your channel, thanks again ❤❤❤

@nolascobaraquel4270 8 ай бұрын

Still working at this moment. I revived my bricked infinix zero 8. thanks for this tutorial.

@putatoooishere2119 Жыл бұрын

hello, someone recommended me your video because i have the same issue, i have bootlooping that it only shows the brand so it keeps getting disconnected, i tried to not mind it but going onto the SP flash tool and going to the COM port, i cant find any COM port. please help me

@naderahmed8299 3 жыл бұрын

hi, first, thank you, its loading rn. but i had a problem, see, idk why, but i have a problem with every pc/phone/usb device. so first the libusb, i added the filter to the usb port of my phone, the driver i had is provided by oppo New QcomMtk_Driver_Setup_V2.0.1.1 and the other one is provided by google, so i had to make this libusb install a filter to the google galaxy nexus adb interface: manufacturer clockworldmod __ and the sp flash tool, wont make me choose the com3 which is provided in the cmd as my phone port. it only lets me choose com1. so i tried on com1, but it didn't work, then i choose usb full speed/with battery/ timeout 60 min when i make it auto detect, it writes down to the right "auto detected com3" but still wont work, i made it ''with battery'' it didn't type com3 but still worked. thank you, i wont have to lie to the service center again, i was really worried, this time they were gonna know that it didn't happen on its on lol

@mbuhjoel2714 2 жыл бұрын

THANKS A LOT, IT WORKS LIKE A CHARM

@mega_info 3 жыл бұрын

The best tutorial so far on the internet ❤

@ringkasfilm1715 3 жыл бұрын

excuse me sir, I followed all the steps but when flashing only the stack on DA is 100%, please reply

@appleagulto1550 2 жыл бұрын

I just recently unbrick my realme 3 using All in 1 opf extractor and brom bypass tool and its works 100% to my device and other mtk devices . And credits to this video because i used some procedure here 💯💯💯💯💯💯💯

@droidtricks3846 2 жыл бұрын

How did you do that I also bricked my realme 3,no charging ,no recovery,no boot,no fastboot. Pls tell me

@Fortun.a_Major 3 жыл бұрын

Thnx man, really saved me..

@lion7306 Жыл бұрын

LIFE SAVER!!!!!!!!!!! WORKING ON MOTO E7 THANKS A LOT ✊✊✊

@rudraprasadbadatya4365 Жыл бұрын

Thanks for the life saver video 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉 I pulled out my Panasonic phone from dead to alive position again

@kenn9349 26 күн бұрын

why mine in libusb-win32 is showing "mediatek preload usb vcom" instead of "mediatek usb port"?

@brandong.8411 3 жыл бұрын

my MT6771 has an error status SEC_IMG_TYPE_MISMATCH HINTS* DOWNLOAD SPM_1 SIGNED IMG or disabled verified boot how to fix this error sir? badly needed to flash my phone for bootloop and hang on logo

@jigenyuzon Жыл бұрын

PLS HELP ME WHEN IT COMES IN FLASHING, THE HINT IS RETRY NEW CABLE, NEW COM PORT, NEW DEVICE, ANOTHER PC. THATS THE HINT

@nandkumarsahu1605 2 жыл бұрын

Doesn't work on modern MT6877 cpu based device like oppo Reno6 5g

@ivangonzales8311 2 жыл бұрын

hello sir where did you get your firmware? do u have any links?

@ultraxgamer510 2 жыл бұрын

will this work on mediatek g80

@johnvincentbonifacio4780 2 жыл бұрын

OH MY GOD THANK YOU SO MUCHH!! I WILL HUG YOU RIGHT NOW IF I COULD MAN

@sodaside6476 2 жыл бұрын

THANK YOU BROO😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘

@74c82 3 жыл бұрын

Thanks. it worked.

@santoshkumarbadatya1655 Жыл бұрын

thank you bro you saved my 10000 bucks

@r.e.tamayo936 2 жыл бұрын

Why would you install phyton in Microsoft store?

@thepepper.9935 2 жыл бұрын

help me pls, no waiting for bootrom;( what should i do?

@netboomtest2881 Жыл бұрын

bro why is my phone keeps disconnected whenever i try to connect it and my phone had this problem pls help thx

@jigendilleyuzon6217 Жыл бұрын

its not working. when i flash my devicee its stay only on da downloading then error will appear

@bilalmeziane Жыл бұрын

Does it work on locked bootloader?

@samuelsamin1643 3 жыл бұрын

Awesome video sir , my realme 7 has been stuck in bootloop , no access to recovery or fastboot or bootloader is possible , it's infinite bootloop is it possible to fix in this way? please help

@levelgod444 9 ай бұрын

brother any video for qualccom snapdragron proccessssssor?

@abhishekkadam3174 5 ай бұрын

My phone is not showing in libusb please give me solution

@Yudibilly 3 жыл бұрын

I have subscribed to your channel,

@free_internet2022 9 ай бұрын

How flashing blackview a95 dead after frp

@souravsuman636 3 жыл бұрын

Mediatek USB port is not showing .. instead it is showing USB serial .. plzzzzzz help

@SonNata 9 ай бұрын

Help, COM3 does not appear

@rockyvlog4087 3 жыл бұрын

Thanks....for video....

@Roaming_Roads00 Жыл бұрын

wow very dangerous working bro thnx a lot u a god to me 100%

@mrpersonreel 3 жыл бұрын

Is this possible on a cubot note 20 pro

@dereference98 2 жыл бұрын

In The UART COM port showing nothing

@robertbhava 2 ай бұрын

My phn isn't detecting in Device Manager

@fj89delta 3 жыл бұрын

what if i cannot find my port under Uart? it will auto detect if i choose usb but will stuck at DA 100% for a long period. any suggestions? tyvm ❤️

@jaheenthaiyub7032 2 жыл бұрын

I faced the same issue. My Port was COM3 but it did not show in Option. So, I went for USB (Full speed). At first I failed, then I made sure 1. MTK_AllInOne_DA.bin is selected in Download-Agent. 2. Selected Scatter-loading file 3. Authentication File left empty. It worked for me.

@janmeersoftware3824 2 жыл бұрын

Error After typing Python main.py How to solve No module name 'usb'

@HowToJack 7 ай бұрын

saved me from my father's beating thanks

@rebeccankurunziza6614 Жыл бұрын

Does it work with soc mt6768??

@YasirAly16 10 ай бұрын

Plz help, miezu m6t hard bricked

@AyeAyeRon-hu4xi 2 жыл бұрын

Hello! Nag wwork po ba to sa any realme phones? like realme 6i? basta mediatek yung processor?

@mothertrucker1262 3 жыл бұрын

lifesaver

@AiCoverse Жыл бұрын

sir will it work on infinix ? Because I want to downgrade my phone

@gamerschoytv3791 2 жыл бұрын

Pwede po ba sp flash tools Lang gagamitin tapos direct na download ung firmware

@Seohandsome 2 жыл бұрын

Boss di na po ba kelangan ng opf file rekta na po ako sa scatter file ? Tagal ng hard brick rm3 ko buti nakita ko tong vids . salamat po

@MarioBejleri-os4mc 10 ай бұрын

Mine is stuck on the red download da

@MohamedFawzy-bh7pv Жыл бұрын

windows 11 mtc not work help

@liamjohnlaygo4330 2 жыл бұрын

Traceback (most recent call last): File "main.py", line 3, in from src.exploit import exploit ImportError: No module named src.exploit Help pooo 😭

@solidstate7788 2 жыл бұрын

same Oppo A16 CPH2269

@arielcaranay3276 2 жыл бұрын

ask lang po . Pano nio nakuha yung scatter file ng firmware ng phone nio?

@aykutsenses741 Жыл бұрын

Fantastic, I have the same problem on my phone, huawei y5p, please help me, there is no reaction, recovery and fastboot mode does not open, but there is a computer connection

@santoshkumarbadatya1655 Жыл бұрын

follow the video properly you will get your phone back because i have retrived my tphone from this method

@harveyjayan709 2 жыл бұрын

hi sir! gagana kaya to pag ginawa ko sa realme 6i? namali po kasi ako ng file ng firmware balak ko po sanang mag rollback dahil naglalag ako sa Android 11. sana matulungan nyo po ako sir.

@tiktop101 Жыл бұрын

Sp flash works wonders

@neilcomrade9516 Жыл бұрын

Can you make a video on OnePlus mtk devices how to unbrick

@elvertandresrodriguez9684 3 жыл бұрын

the imei lost?

@LightOfGeek 2 жыл бұрын

when i run the command and the process reach "disabling protection" it just stops without disabling protection

@santoshkumarbadatya1655 Жыл бұрын

you dont run the command there is a app called mtk bypass tool just open that and click on ok or run which ever option is availabe you will be good to go because i did the same thing

@zedsh7095 2 жыл бұрын

Sir pwde ito sa samsung j1 sm-j100ml kasi di napo sya nag OON e

@itsfuntime3109 3 жыл бұрын

My bootloader locked realme xt is displaying only the logo. Boot /img destroyed and restart automatically. No way to go to recovery, system or fastboot mode

@tanjirokamado8294 Жыл бұрын

we have the same problem , btw did u fix ur device

@itsfuntime3109 Жыл бұрын

@@tanjirokamado8294 Yes

@tanjirokamado8294 Жыл бұрын

@@itsfuntime3109 or i message u , my phone Xiaomi 11T(agate) still bootloop and cant access recovery and fastboot

@tanjirokamado8294 Жыл бұрын

@@itsfuntime3109 just badly need help from someone who encounter this problem

@MirrorMan-ey8pv 5 ай бұрын

how bro please help...;)@@itsfuntime3109

@OKamiKAT 2 жыл бұрын

My Realme 3 is on Red State. Can you help me? I've done this process and it's a success but my phone can't boot because of Red State.

@santoshkumarbadatya1655 Жыл бұрын

yes just press the all three buttons and click ok in mtk bypass tool and then flash the rom from com port option

@HollyShitz 6 ай бұрын

C:\Users\KAPLAN\Desktop\Bypass_Utility>pip install pyusb pyserial json5 'pip' is not recognized as an internal or external command, operable program or batch file. ???????

@jojiemadarang714 2 жыл бұрын

Com 1 lng po yung meron sa flash tool kopo

@user-fb9ip3yl2c Жыл бұрын

I got the error after bootrom "notimplementederror: can't find 0x699 hw_code in config"

@louiegearobo736 11 ай бұрын

same problem. did you find any solution?

@sherlockholmes4602 2 жыл бұрын

Can you please help me? I have a Realme GT Neo. I picked Format All + Download while flashing and now my phone wont work. Any flashing wont help and its stuck in bootrom mode.

@GodlxCrow 2 жыл бұрын

Yah i can help

@rfncmaximus1038 2 жыл бұрын

@@GodlxCrow how ?

@khaiijumdani4149 2 жыл бұрын

realme c2 ?

@CarlosEduardoPivato 2 жыл бұрын

When click in Download, I get this error: [HINT]: Verified boot is enabled. Please download signed image(md1img-verified.img) or disable verified boot. Is disabled the boot: [2021-09-28 10:33:02.138418] Protection disabled. Can any body help me? :/

@CarlosEduardoPivato 2 жыл бұрын

I found a solution for this!!! I only unmark the md1img and my wife phone is back!!! Thanks a lot you and to XDA!!! ❤️

@santoshkumarbadatya1655 Жыл бұрын

use the mtk bypass tool it will solve your prob

@badayosjakeryan1496 2 жыл бұрын

i know the steps but my ph9ne is not booting to realme white so i can flash it or no?

@santoshkumarbadatya1655 Жыл бұрын

you can flash it this the video for totally dead mobiles without boot so you will definetely get your phone back

@Ryuk433 3 жыл бұрын

Bro will it work in realme 6 plzz reply bro it is very important to me plzzzz 😭😭🙏🙏🙏🙏

@Ryuk433 3 жыл бұрын

Bro my phone can't open bootloader and custom recovery what will I do bro plzz help me😭😭😭

@nof140 2 жыл бұрын

do I need fastboot rom or recovery rom?

@dxerkin4 2 жыл бұрын

try both, if the fastboot one doesn't have the scatter file it could be the recovery one or viceversa

@winnardalba6258 2 жыл бұрын

Sir paano po ba pag sa cmd pip is not recognized as an internal o external.... Nka lagay?

@russel5361 2 жыл бұрын

same question here any update sir

@raymondpascual4467 2 жыл бұрын

Naayos mo naba to boss?

@sakuramysthic684 Жыл бұрын

Kuya naka stuck lang po sa Download DA 100%

@karkovb1522 2 жыл бұрын

OMG THANK YOU! But first thing first please add this to the requirements: "Make sure Mediatek drivers are installed on your computer!" This is my first time dealing with MTK phones and auth bypass type of stuff and I was stuck on the Libusb filter part (It didn't show "Mediatek USB" but instead a generic Microsoft USB) so I have to search around on how to get it right (managed to found a similar thread of this but for Redmi Note 9), turns out I didn't have MTK drivers installed on my PC. You didn't specify that we need the driver to make it work but turns out we DO. But anyway your tutorial is the one that saved me still, so thank you I really mean it. Cheers!

@vincentjaya.maulino1059 Жыл бұрын

Hi sir can you help me how to install mediatek driver?

@jorycollins1744 3 жыл бұрын

ERROR STATUS_EXT_RAM_EXCEPTION (0xC0050005) sir I keep getting this error on my realme c12 but I followed every step and used correct firmware any help will be appreciated

@crazykudii2230 3 жыл бұрын

DID YOU FIND ANY SOLUTIONS???? SAME ERROR PLEASE TELL

@jorycollins1744 3 жыл бұрын

@@crazykudii2230 nope just go to service center and replace motherboard

@crownwearer6154 2 жыл бұрын

Any solution bro?? Yet??

@jorycollins1744 2 жыл бұрын

@@crownwearer6154 new motherboard

@ankitnehra5485 3 жыл бұрын

com port is not detected in sp tool

@santoshkumarbadatya1655 Жыл бұрын

you have to go to the com port by disabling the protection of boot rom by using mtk bypass tool

@neilpatrickvallido6220 3 жыл бұрын

Incorrect hw code, expected 0x813, found 0x707

@runaway3189 2 жыл бұрын

hello bro did you find any solution for your problem of incorrect hw code :(

@apkcheating5175 3 жыл бұрын

I bricked mtk device'spreloader and know the PC detect it as unknown usb can you help me? Your tutorial can't help me because I can't detect the device correctly

@apkcheating5175 3 жыл бұрын

It says 'device descriptor request failed'

@XDReturns 2 жыл бұрын

@@apkcheating5175 fixed?

@apkcheating5175 2 жыл бұрын

Not sure🙃

@apkcheating5175 2 жыл бұрын

@SIDHU MEMES Try different pc

@trongzufo1885 3 жыл бұрын

i'm stuck in boot loop and can't escape from it now, i try many solution but cant ! Are you have any solutions for me?

@feinnOG 3 ай бұрын

Bro I u done is it working now

@trongzufo1885 3 ай бұрын

@@feinnOG i dont use realme 3 anymore bro. But follow this method should be working since it basically using like miflashtool, thus if it doesn't work then I have no idea.

@copycat9666 3 ай бұрын

Showing error bro

@norlansuico 2 жыл бұрын

how about for hardbrick?

@santoshkumarbadatya1655 Жыл бұрын

in works in hardbrick also i had the same case with my phone and retrived it from this brilliant video

@norwindaveramirez6089 2 жыл бұрын

Nc sharing, Lods Pano gawin sa router modem na mediatek chipset openwrt firmware

@gr8d.333 Жыл бұрын

Boss pano kaya tong sakin? Vivo Y19 device ko, dati nagagamit ko mtk auth bypass tool dito ngayon ayaw na, mag flash sana ako stock rom e mag downgrade ako. Triny ko na din tong method mo kaso lang ayaw kumagat sa python kapag ginagawa ko na, di siya nareread, unang gamit ko python 3.7, sana matulungan mo ko. TIA

@gr8d.333 Жыл бұрын

Android 12 na tong version ng os ko*

@clarefics5141 3 жыл бұрын

sir can you help me with my problem in cmd when I type pip install pyusb pyserial json5 nothing happens

@clarefics5141 3 жыл бұрын

it says The requested operation requires elevation

@adriandelacruz3018 3 жыл бұрын

Uninstall and Reinstall Python, if you are using Windows 10 install it though Microsoft Store.

@clarefics5141 3 жыл бұрын

@@adriandelacruz3018 sir i have problem ERROR: STATUS_ERR (0xC00100010) can you help me? All our process is almost same except in the flashtool where you click option, I have no option COM3 sir

@adriandelacruz3018 3 жыл бұрын

@@clarefics5141 you COM number depends on "Found Port" in CMD, after you Type "main.py" you should see your device port. Its not always COM3 it might be COM7 or 8,9,etc. , But if shows nothing in Flashtool i mean nothing to choose, you have to download the Other version of SP flashtool or better if its the latest version.

@clarefics5141 3 жыл бұрын

@@adriandelacruz3018 Sir I do finish the downlaod phase in sp flash tool and it show successful but after I open my phone it says download not completed,,, power off and download again. Can you help me sir?

@arevalokristianremsonlonto5141 2 жыл бұрын

how to realme 6 pro

@lukatsindeliani3267 11 ай бұрын

can i use same method on soft bricked xiaomi poco x4 gt? bootloader is locked BTW

@EL_PSYcongroo 3 ай бұрын

is ur device is a mediatek device

@lukatsindeliani3267 3 ай бұрын

@@EL_PSYcongroo yes, I already repaired in the service center

@EL_PSYcongroo 3 ай бұрын

@@lukatsindeliani3267 my device is hard bricked rip

@EL_PSYcongroo 3 ай бұрын

@@lukatsindeliani3267 idk what to do

@lukatsindeliani3267 3 ай бұрын

@@EL_PSYcongroo is there any authorized xiaomi service center in your country?

@JMRVRGS Жыл бұрын

Boss paano kung USB Device not recognized? Tipong parang nagdi-disconnect siya ayaw mabasa.

@kennethdelan1421 Жыл бұрын

install ka muna mtk drivers

@majkel3702 Жыл бұрын

Did you fix it? I have the same issue..

@JMRVRGS Жыл бұрын

@@majkel3702 Binabalik lang namin sa customer service tapos inaayos nila. Sinabi lang namin nag-update tas ayaw na bumukas.

@Thesniperrkid 8 ай бұрын

My laptop crashes

@osamakhaled3341 Ай бұрын

As usual it didn't work for me

@lostboy7904 Жыл бұрын

Bro online bnaoge kiay

@leonelmendoza9174 3 жыл бұрын

Sir yung phone ko po kc ei automatic na nag didisconnect pagkatapos ng ilang segundo

@leonelmendoza9174 3 жыл бұрын

Sana po matulungan nyo po ako😩

@adriandelacruz3018 3 жыл бұрын

Please panuudin nio po ang buong process para ma disable nio yung Usb Watchdog timer, para di mo na disconnect yung phone nio.

@leonelmendoza9174 3 жыл бұрын

Sir ganun po ba yung sa inyo kapag nag connect din po ba kayo sa pc ei nawawala din po ba?

@leonelmendoza9174 3 жыл бұрын

Kaya po kc nasira yung phone ko ei na flash ko po kc yung maling img file dun sa twrp

@leonelmendoza9174 3 жыл бұрын

Unlock na din po yung bootloader nito bago pa po masira yung phone ko

@zilchgott 3 жыл бұрын

Ok, nagka problem ako... Sa SP Flashtool > Option > Connection > Connection Setting > UART : Di ko makita yung tamang "Found port" number ko... mine should say "COM4", pero "COM3" lang yung lumalabas. Edit: Nagka problem ako nung una sa "libusb-win32" na app - di rin makapag install ng Mediatek device kasi di siya makita, so sinelect ko na lang yung composite device. Nakaka frustrate.

@adriandelacruz3018 3 жыл бұрын

ulitin mo yung part ng LibUsb

@zilchgott 3 жыл бұрын

@@adriandelacruz3018 yep, sir. I think nandun nga yung problem ko... di lumabas yung Mediatek device. Pano kaya solution dito? Thanks

@adriandelacruz3018 3 жыл бұрын

@@zilchgott try mo uninstall muna yung LibUSB, tapos restart computer, then pag uulitin mo na yung process. sa ibang Port mo isaksak yung Usb Cable mo, if Desktop PC gamit mo masmaganda dun mo saksak sa likod. yung embedded usb port ng motherboard. if ayaw pa din try mo gamit ibang Laptop or PC, (note: mabilis dapat kamay mo kasi mabilis madisconnect ang mediatek device pag deadboot dahil sa WatchDog Timer.)

@zilchgott 3 жыл бұрын

@@adriandelacruz3018 inulit ko na lang yung command sa python na "python main.py". For some reason, pag check ko sa connection setting sa SP tool, lumabas na yung "COM4". ahaha So, ngayon, meron akong "Download DA 100%" pero red-bar, hindi "yellow-bar". Ang weird. Wait ko if mag error or something...

@zilchgott 3 жыл бұрын

@@adriandelacruz3018 Update: So, nagka error nga ako. "ERROR: STATUS_DEVICE_CTRL_EXCEPTION (0xC0050001) [HINT]:" *walang nakalagay sa hint.

@gamerschoytv3791 2 жыл бұрын

Link Ng Sp flash tools idol please

@AyeAyeRon-hu4xi 2 жыл бұрын

Pwede po ba makahingi file ng realme 6i? ty in advance po