Repair Replace Door Jambs Part 1

Рет қаралды 363,872

5 жыл бұрын

Do It Yourself Repair Replace Door jambs and SAVE!!!
www.paulstoolbox.com
Rockwell Oscillating Tool amzn.to/2OEey6N
Ryobi Nail Gun amzn.to/2D7VjRK
Swanson Pro Scribe Tape measure amzn.to/2QEKtVP
Swanson Jab Saw amzn.to/2MNbD9Y
Swanson Speed Square amzn.to/2plfOAB
Stanley wonder Pry Bar amzn.to/2OBLcG7
Stanley claw pry bar amzn.to/2NnJfQX
Replace Weatherstripping VIDEO • Fix the weatherstrippi...

Пікірлер: 834

@DavidAguilar-kl5ey Ай бұрын

65 years young and I think you are showing everybody how simple it is to do things with common sense and simple hand tools. Thanks friend your awesome

@slamtyra 5 жыл бұрын

I am a 72 (and a half) year old woman. My front door had rot at the bottom on one side, both the brick molding and the jam was rotten. I followed your directions, started at 7:45, had to run to the hardware store to get sharp blades for my oscillating saw, and finished at 10:50. I measured twice and cut once and my pieces fit the first time. The sun came around and I had to stop, tomorrow I will fasten the pieces and caulk. Thank you for suck a good video, it was perfect!

@paulstoolbox 5 жыл бұрын

Hi Sharon, You are awesome...... I wish everyone could tackle a job as well as you! Thank you so much for commenting, you made my day! Paul

@A10TOES 4 жыл бұрын

I admire you for repairing it your self.

@Nomadahtous 4 жыл бұрын

lol...I laughed when I read your post...Im a 61 year old woman living in Maine, winters are hard on our door jams and im finding great resources like this when I need some insight...If I had to contract for every repair ive done Id be homeless lol

@Expertwrench 3 жыл бұрын

Excellent video, I can’t wait to do my jams!

@oldrmike1195 3 жыл бұрын

Hey Karen, how’d you like to make a few bucks doing that job for me.! Young lady I’m a lot older than you, 73,and don’t evenhave my own oscillating saw.

@brianlovell4027 Жыл бұрын

this guy has a knack for teaching very clear, indepth and concise . Keep it up Paul.

@chanceledoux1923 2 жыл бұрын

This is the only video I’ve found that walks you through the fundamental steps of replacing a door jamb. I’ve been trying to figure out how to do this for 2 days lol every video I watch is such a unique scenario believe it or not that it doesn’t apply to what I was trying to do! Thank you for this video!

@marchingon5401 5 жыл бұрын

Another awesome "How-to" Video. I've learned a ton of time and money-saving tips from your videos. Thanks Paul!

@fubar94 5 жыл бұрын

As usual Paul, another great video for us DIYers. I've hung several doors in my DIY time but so far have never needed to do a repair like this one. But, now I know I could if needed. Thanks, and keep 'em comin'!

@roybrown187 5 жыл бұрын

Another great video. Since my retirement last year, I am slowly getting into woodworking and doing more house renovations and repairs. Enjoy watching and learning from all your videos, very helpful to me. Thanks.

@campmein 4 жыл бұрын

Wow, you make it look so easy... that is from years of experience. Thanks for thoroughly explaining everything. I will be watching this video many times when I tackle the dreaded job of fixing my door. As an old Navy man use to say many times when he completed a job... and fitting here as well, “A joy of beauty and a sight to behold”!

@lamoe11 5 жыл бұрын

Now I can replace my damaged door jamb! Great video keep it up! Thanks

@charlottehallman7879 5 жыл бұрын

I have searched the web for this project repair and finally came across your video and it is so perfect! You really explain the steps so clearly without un-needed details that are obvious to even a first time diy person! Very clear speaking with every step! Thanks for posting to help others! Great Job!

@barnabasranch5415 5 жыл бұрын

I had always been somewhat intimidated by door jambs, but after watching this I can say that I feel confident of being able to do the repairs myself next time it comes up. Thank you

@mjbjr1944 5 жыл бұрын

I appreciate that you are so kind, thoughtful and considerate to take the time and effort to share all of your knowledge with everyone. I'm sure you could have completed that job in very short order but because of all of the camera setup and shifting it around the job took much longer than it would have. You're a GOOD man, Paul. Thank you very much!! GOD bless!!

@paulstoolbox 5 жыл бұрын

I can't tell you how much I appreciate you commenting! It does take a lot more time when filming but it is well worth it. I sometimes get jammed up and I have to do projects without filming and I am always sorry that I didn't. Viewers like you make my day! Have a great day and God Bless you and your family! Paul

@jumanji5239 4 жыл бұрын

I am so glad your channel exists. Great job as always!

@levyrogers6979 4 жыл бұрын

Really well done video my man. It's great to see someone who really knows what they are doing on home repair, and who takes the time to show as well as brake it down for those who know nothing about the DIY of home repair. Well done.

@dikemanj 5 жыл бұрын

Perfect timing for this video I was wondering how I can replace the jam on my back door. The dog has decided he needs more wood in his diet. Great video very informative

@red05malibumaxx 5 жыл бұрын

Just stumbled across this as KZfaq recommended it! Great lesson! I need to do this to my door here soon. Totally feel I can now tackle this job. Tysm!! Great vid.

@paulstoolbox 5 жыл бұрын

Hi Edward, Thanks for watching and commenting. Please subscribe and hit the bell so you get notifications of new videos. I am working on some new videos now. If you have any questions let me know. You can contact me on my website www.paulstoolbox.com. Have a great day! Paul

@EnriqueReyesJrREALTOR 5 жыл бұрын

I like your simple, direct, and easy way you describe, DYI videos, using the best simplest tools.

@INGRAMart 5 жыл бұрын

Great and timely video. I have 3 rotten door jambs that need to be taken care of before winter. Now I have the confidence to get started with the repair. Thanks.

@dennismartineau9147 3 жыл бұрын

Glad I found your channel, Paul. I was looking for info on how to replace doors. I was shocked to find out just how much I did NOT know. You have a wealth of information and you're a great teacher. Many thanks!!!

@timothysvirbly4988 5 жыл бұрын

Great video! Thank you for thinking ahead and linking the Replacing Weatherstripping Vid! I was just thinking about replacing the weatherstripping in my house. Eagerly awaiting the next bathroom remodel video!

@dannypiercesr 4 жыл бұрын

Thank you Paul for all the helpful videos, they have helped me tremendously, I am a licensed electrician and your videos help me tackle a number oh home projects

@heyitsrick01 5 жыл бұрын

Great video, Thanks.. I am a DIYer for EVERYTHING... been REBUILDING my current home. Your tips are great & valid... Specific tool notations are great too, if anybody wants to buy that specific too they've seen you use. THANKS AGAIN for you excellent work ethic & professional standards to get things done the RIGHT way..... not JUST GOOD ENOUGH... Seen alot of that and that's what prompted ME to become a DIYer... I have quatlity control & if it doesn't look right, I"ll do it over again. PEACE

@paulstoolbox 5 жыл бұрын

I'm with you on that one Rick, do it right or don't do it al all. I really appreciate DIY'ers like you! Have a great day! Paul

@schwety7 5 жыл бұрын

You’re the man, Paul. Love your work.

@donhaakinson9546 5 жыл бұрын

Good video Paul! I've got a similar situation on a door at our newly purchased home! Thanks for all the tips you give! I have tons of work to be done on this home! Saving money and fixing it right the first time!

@guyprior6237 5 жыл бұрын

My wife told me to explain why I like your videos. You explain why and what you are doing pointing out what tools to use which is always helpful. I recently repaired a soffit based on your soffit video, which was very helpful. I know sending stuff to N.Z is a nuisance but I really like that saw; you can't get them here.🤓 First in the country to have one hmmm🤔

@paulstoolbox 5 жыл бұрын

Hi Guy, I hear New Zealand is beautiful, one day my wife and I will be able to travel and I hope to see your country! I am working on the companies to try to get them to ship overseas. If it happens we will both be happy. Thank you so much for watching my videos I really appreciate you! Paul

@Duderonemy 5 жыл бұрын

I have a rotten jamb I've been meaning to tackle. This video came along at just the right time, thanks Paul!

@arthurrobles8087 4 жыл бұрын

Paul's toolbox has saved me on several honeydo projects at home. Thanks Paul.

@robertmiranda1925 5 жыл бұрын

This was a very clear explanation about replacing a single door jamb - great job

@michaellundy2889 4 жыл бұрын

This was very helpful! Thanks Paul for making this so simple.

@TBONEVIKING 5 жыл бұрын

I love your channel. I have two doors that I need to replace. The guidance was very helpful. The saw looks like it’s a big help to make precision cuts. Thanks for all you do to help us novice DIY’ers..

@livingstone6910 5 жыл бұрын

Always enjoy your work Paul, you always nail all the points I've got questions on and every video is succinct. Your work and channel is top notch and a cut above. Thx for all your help.

@bobc3895 5 жыл бұрын

This was a very clear explanation about replacing a single door jamb - great job!

@mrsstoner613 5 жыл бұрын

This is perfect timing on this video. My mom called me asking me if I could fix her door jam and replace the weatherstripping. Super useful video and full of info. I will have to call a few friends and see i can use their saws though. Keep 'em coming!!!! I do a lot of diy projects, that saw would come in real handy for and save me a bunch of time!

@paulstoolbox 5 жыл бұрын

Thank you for watching and commenting. If you need any pointer for your project you can direct any questions to my website paulstoolbox.com. I will do what I can to answer any questions. Have a great day! Paul

@mozes42 5 жыл бұрын

I travel a lot for work, but your videos get me amped to get home and jump back on my honey-do list. It’s full of projects just like this. Thanks!

@paulstoolbox 5 жыл бұрын

Hey MoziseCT, Thanks for the comment. If you have any questions you can contact me on my website www.paulstoolbox.com. Have a good day! paul

@juanbarragan8040 4 жыл бұрын

I like how you keep it simple to understand, well done!

@landovash 5 жыл бұрын

Another good video, loved one of the previous tutorials of yours on the recessed crown molding with lighting, nice touch!

@peterscholten4860 3 жыл бұрын

Yep, I find all your videos useful. Thanks for being there.

@dspeer77 5 жыл бұрын

Thanks for all the helpful tips Paul. I'm a DIYer and this channel is very helpful for someone like me.

@michaelsparrow4208 5 жыл бұрын

Nice fix liked both your saws ! That’s exactly what I need to do to my pole barn door. Nice to see it done like this ahead of time so I know what to except. Thanks

@bluekingfisher1416 5 жыл бұрын

Thanks for the pro tips, Paul. I do as much of my own DIY work as possible. The ridiculous prices quoted by some contractors are the primary reason I do most of my own repairs at home. Most of it is straight forward enough, although your advice ensures a speedy and economical way of completing the task. Cheers.

@paulstoolbox 5 жыл бұрын

Hey BlueKingfisher, I know what you mean with prices. Thanks for commenting. Have a great day. Paul

@alphaandomegabracelets2673 5 жыл бұрын

You are such a great teacher Paul. Thank you.

@dirkbarriere 5 жыл бұрын

Really like your no nonsense approach. Keep it up.

@melvinthorne3134 5 жыл бұрын

Great video. I will be replacing my door jamb pretty soon as well. I'm glad you posted this video. My door rotted out in the exact same location.

@Kaestner42 5 жыл бұрын

Thanks Paul! These videos are so helpful for a home-gamer like myself. It's all about the little tips n' tricks that make my home repairs & remodeling come out looking professional!

@paulstoolbox 5 жыл бұрын

Thank you for taking the time to comment! Paul

@co850 5 жыл бұрын

Super useful video, since I am replacing/fixing 2 doors right now. Thanks Paul.

@hatchet81 5 жыл бұрын

I need to replace my inlaws door jamb sometime this month. The builders didn't put shims behind the jamb so now after 20+ years the door jamb is outta square. Good useful tips, thank you and that's is a handy saw.

@yahwehschosen8472 5 жыл бұрын

Thanks Paul! You are my go to guy! Great job! Bless you and yours!

@waynegoebel395 5 жыл бұрын

I just finished replacing the entire door jamb on a garage passage door where both bottoms were rotted out. the old threshold was also rotted away so I replaced that as well. Using the original door meant that I had to match the butts as well. Actually saved the customer some money over buying a complete door pre-hung door. Great Videos Paul. You have a new subscriber. Thanks!

@paulstoolbox 5 жыл бұрын

It sounds to me like you know what you are doing my friend. I'm sure I could learn tips from you as well and I really appreciate you taking the time for me! Have a good day buddy! Paul

@telih 5 жыл бұрын

Really nice of you to help them out with that project. That oscillating tool looks amazingly helpful too.

@ckeller07 5 жыл бұрын

The oscillating saw is one of my favourite tools.

@pacojerte_ati 5 жыл бұрын

Great job as always. I always enjoy watching your videos, very informative!

@troiricusrembert6652 5 жыл бұрын

Hey what a coincidence I was just about to search for some videos on door jamb and I got a notification from you I appreciate you and I appreciate you uploading your videos have been quite helpful so far thank you

@tjmc188 5 жыл бұрын

Excellent explanation of how to do this. Have a door jam that needs fixed! Very helpful!

@wesleysanford654 3 жыл бұрын

I have three doors in my garages that need this seam repair. Now thanks to your video, I will be able to do it myself. Thank you.

@frankj.sancheziii4694 5 жыл бұрын

As always another great repair & video. I'm a long time subscriber to your channel, I love the work that you do, keep up the good work Paul!

@marlontomera 5 жыл бұрын

Thanks for showing us how simple this job is. Now I can fix that loose door jam to our master bedroom.

@michaelchiasson753 3 жыл бұрын

Great video, timing is great because I will be replacing my back door jambs due to rot. Very informative and detailed. I also like the tools.

@skipwatson5258 5 жыл бұрын

Man, I love these videos Paul! Always relevant to stuff I'm doing lol.

@pdxDavid 5 жыл бұрын

Great stuff as usual. Love the zero clearance on that saw. Very useful.

@geoambler 5 жыл бұрын

Thanks Paul, enjoy your videos and hints. This one is timely, I have not one but 2 door jambs I need to fix this weekend.

@ussphantom 5 жыл бұрын

Thanks Paul, great video. My back door jab of my house I bought last year was destroyed by the previous owners dogs. I didn't know were to start to fix the door. Now I know exactly what to do. Thanks again. Excellent channel.

@paulstoolbox 5 жыл бұрын

@ronjackson7505 4 жыл бұрын

Great video! I followed it step by step and the door jam turned out perfectly. Thankyou for posting this video.

@fernandovelasquez7883 Жыл бұрын

Great jobb Paul and I love the way you provide all the dyi information needed to perform this type of work! Excellent professional instructor!

@troywalters2868 5 жыл бұрын

Looking forward to your tool demos, I've seen tools you use that I've never seen. I really like the Worx cordless saw. Oh, I also appreciate the craftsmanship you show in your work.

@paulstoolbox 5 жыл бұрын

Hi Troy, I really appreciate you buddy! Worx has a few tools that I really like and this saw is pretty cool. It seems to work well for me but I would like to see a couple of improvement. It comes with a 2 AH battery so I bought a 4AH backup that has a light indicator, it shows how much charge you have. I wish that came on the original battery. They also sell a 30 min rapid charger and the one with the saw is a 1 hour charger. Thes are minor things for a DIYer and I must say that I really enjoy this saw. Thank you for talking the time for me! Paul

@genevacox3770 4 жыл бұрын

Paul Ricalde you did a awesome job nice work

@spec46971 5 жыл бұрын

Glad you made this video my son in law has a damaged door jamb and I was trying to figure out the right way to do it.

@renatocalip1090 4 жыл бұрын

Absolutely very precious video. I'm moving to Florida In 3 mos, I surely learned something from this video.

@melfallen6673 5 жыл бұрын

Awesome job - great video! I really appreciate the tip of beefing-up the area behind the strike plate. All blessings to you & yours, our military, police, firefighters & first-responders!!!

@paulstoolbox 5 жыл бұрын

Hi Mel, Thank you for the nice comment. And thank you for the blessings. I really appreciate it. Blessing to you and your family too. Have a Great Day! Paul

@bobmullins765 Жыл бұрын

Great presentation, Paul! Right to the point and explained so that even a novice can grasp it. I have a similar situation that I now feel comfortable in being able to attack.

@jimm824 4 жыл бұрын

Excellent!! Explained very well throughout and great tool info too!

@gracemoore3090 5 жыл бұрын

Thanks Paul, I have never tried this repair and are delighted to have seen this first. I am a late bloomer when it comes to these things, but soon realized that I enjoy it , instructional videos such as yours take full credit for that. I just purchased the Rockwell tool today, have been thinking about one of those for a while, so glad to get the review and recommendation. Keep up the good work and thanks again.

@paulstoolbox 5 жыл бұрын

Hi Grace, Thank you so much for your comment, you won't be disappointed with Rockwell! If you have any questions or concerns with your projects, please contact me at www.paulstoolbox.com. I will do my best to help! Thanks again! Paul

@jbfam7208 5 жыл бұрын

Hey Paul, thx for the video. Keep it up, i really appreciate all the tips and trix.

@paulstoolbox 5 жыл бұрын

Thanks for the comment. I plan on doing some tips and tricks videos soon. Paul

@ThomasVMan 5 жыл бұрын

Hey Paul. Excellent timing as this is a job I need to do next. Thanks!

@larryhuddleston7301 4 жыл бұрын

I've been looking for a video explaining how to install a three-piece door frame. Although this is not exactly what I was looking for, it did explain a lot and I feel I can take your demonstration and do the complete installation. Thank you

@chrissimon8403 5 жыл бұрын

That is a handy saw, especially when there is no power available where you are working, you are a true master Paul!!

@debbeymccollum9545 4 жыл бұрын

Thank you Paul for the teaching moment.

@danielgiovingo5543 4 жыл бұрын

paul thank you. this has been the best video ive seen for replacing a door jamb. thanks so much. dan

@emailusatdotcom 2 жыл бұрын

I just watch about 4 videos of repairing door jam and yours was very helpful. The best so far. I'm convinced to do it myself and will get both of those tools. Or win one!

@eroywilliams2812 2 жыл бұрын

Paul, you just help me out a lot. This makes its really easy, now i can do my job tomorrow. Thanks

@robertsalazar5061 Жыл бұрын

You are an awsome teacher Mr. Paul!!!

@LMerryman 5 жыл бұрын

Great idea on the saw, hope I'm the lucky one. Thanks for the video, I do it much the same way, always nice to confirm I'm on track. Even greater when I can learn a tidbit or two that I hadn't thought about.

@johnsullivan3386 3 жыл бұрын

Excellent video, was exactly what I wanted to see, ready to start my exterior door,maybe with a new saw!!

@gtothewill3734 4 жыл бұрын

My man your awesome!!! Great diy video, and just in time!!! May you continue to be blessed!!!

@metalica132 2 жыл бұрын

Why did I have to resubscribe to your channel? Been watching you for a few years now and I went from a home owner who couldn’t put paint on the wall 8 years ago to a home owner who did a full dismantle and rebuild on my bathroom, tore down and built my fence, and lots of projects around the house largely thanks to you. Thanks again for the videos Paul I wish I could work under you and really learn.

@dujavufear 5 жыл бұрын

That’s actually a cool little saw! Great job on the door jamb.

@HB-ct8hh 3 жыл бұрын

Very good instructions on replacing door jambs. I really appreciated the tool recommendations as well!

@Tinto4 4 жыл бұрын

this fellow's vids are always helpful and effective. good job.

@bme6949 4 жыл бұрын

This is very helpful...my house was robbed and the door jamb was heavily damaged from someone's foot... This made so simple and I had it done in less than an hour. Thanks alot for the advice.

@mikemike7397 4 жыл бұрын

Thanks a lot it’s clear concise straight to the point and one of the easiest videos I Follow.

@edsloan4671 5 жыл бұрын

Perfect timing! Was planning to do this at my home this week and now I have the knowledge and confidence to tackle the job. Thank you.

@paulstoolbox 5 жыл бұрын

Hi Ed. Thanks for the comment. If you have any questions you can contact me on my website www.paulstoolbox.com. I would love to help.. Have a Great Day! Paul

@edsloan4671 5 жыл бұрын

Paul Ricalde Wow, didn't expect a reply. Thank you for the assistance.

@paulstoolbox 5 жыл бұрын

Thank you Ed, I try to reply as much as possible, I appreciate each and every viewer that takes the time out of their busy day to watch my videos and comment to me. The reason why I ask to direct questions to my web site is because I may miss your question once a new video comes out because I may get comments from older videos and I have over 120 public videos. I also work full time as a firefighter and I have 2 Patents on the market that require constant work. Have a great day buddy and I look forward to seeing some of your projects! Paul

@xblindfolded 5 жыл бұрын

Always enjoy these videos. Keep up the wonderful work.

@joejackson9846 4 жыл бұрын

great video on repair replace door jambs. clear and understandable. Keep up the excellent work Paul.

@joewenzel5142 Жыл бұрын

The link for the weatherstripping video is just what I needed. My dog's nails has put several holes in it as he excitedly wants to get out the door.

@kth2590 Жыл бұрын

Thanks so much for your awesome instructions for replacing the door jam.

@brandonstimpson2958 5 жыл бұрын

This is exactly the job I’m doing. Awesome tips and clear, concise, instruction. Well done!

@paulstoolbox 5 жыл бұрын

Hi Brandon, Thank you for the nice comment. I try to explain things to help the DIYer take on their own projects successfully. Have a great day! Paul

@holyfreakinguacamole 4 жыл бұрын

Straight to the point! What a relief!

@mrjcds1 2 жыл бұрын

I just need to replace an interior door but this gave me everything I was missing. Also super glad I ordered my dewalt multi-tool from lowes last week! Looks like I'll be needing it. Great content Paul - You've gained a new subscriber

@Jacquep801 4 жыл бұрын

great video! just subscribed to your channel!! I'm a mother of 8 and grandma of 4 so far! We have always done things needed to be done by ourselves.. so pleased to have found you on the web

@donfulton7865 3 жыл бұрын

Excellent repair video on fixing the door jam. Thanks

@OneWorldFilms 5 жыл бұрын

Really enjoy all your videos paul. Learning alot

@davidy1382 3 жыл бұрын

Thanks Paul for an easy to follow video. I am sure I will be able to replace my brocken door jam and save a lot of money.

@denniswhalen9572 5 жыл бұрын

Hey Paul, being a new homeowner your vidoes have saves me lots of time and headaches i thought it was cool using the autobody tool to get in tight spots im buting one today. Thank you paul and your toolbox for all the cool tricks which make total sence man you saved me time. Sincerely Dennis Whalen