What is the best way to repair a wheel speed wiring harness? Spoiler alert; there isn’t one! Find out why in part 2 of this Tech Minute video. Visit bcabearings.com/
Пікірлер: 33
@802Garage Жыл бұрын
It is false that a wire splice cannot be completely sealed from the elements. It absolutely can be through various methods.
@mikesjunk3 жыл бұрын
This is the kind of kid who act like I was copying off his test but always I had the highest score. Yes this is “by the book” but repairs done the right way, can be just as new. I am an engineer by degeee.
@kg4boj3 жыл бұрын
I have a 2002 Mercedes silver arrow in the shop the customer drove untill the tire wrapped around the rear right axle. since less that 2000 were made not even Mercedes can help us.
@eatentravel Жыл бұрын
Thanks for giving such nice details. What will happen if the abs sensor wires got short at connector end? Will it damage the module?
@jesi.o15024 ай бұрын
Thanks so much for answering this question of mine so well.
@BCABearings3 ай бұрын
Thanks for checking out our video. Glad you found it helpful.
@moonglow11583 жыл бұрын
Got on for a 1991,Volvo 240 w/o abs rear speed sensor
@moonglow11583 жыл бұрын
My wires were bad i clean off the oil and will insulate them and reattach
@alwansutanto5103 Жыл бұрын
as long as resistance are same measurement its fine
@grenebulax Жыл бұрын
How about add in another connection
@adjmbb51092 жыл бұрын
Bro I just need to get it fixed for my Wof
@randytrent93992 жыл бұрын
The gold plated Wire to the connector too the abs The gold plated wire coming out of the wiring harness is missing I need a video showing where it goes to tie into in the wiring harness to be able to hook it back into my BS for a 2014 Toyota Camry
@BCABearings2 жыл бұрын
Hi Randy- I am not exactly sure what you are asking, but can tell you that you would need to reference the Toyota service information for an accurate wiring diagram and repair procedure for your specific vehicle. If you are experiencing issues with wheel speed sensor wiring, it can lead to safety issues, so we always recommend taking your vehicle to a trusted repair shop to ensure any issues are safely resolved.
@thailor Жыл бұрын
solder liquid tape and heat shrink works juuuuuuuuuuuuust fine, especially if that dumb little sensor is 80 bucks a wheel, I wouldn't try this on an AWD of course, but some older rig why the hell not.
@dragonknight9016 Жыл бұрын
Flex Seal !!!
@edwinm13922 жыл бұрын
its well and good to replace the cable. The 2015 Ford Focus Ecoboost [vin: WF04XXGCCFE07929] 🙄has a cable that ha no intermediate connectors. It is directly wired to the ECU cables and the only way to replace the accident damaged senor is to cut and rejoin the cables... then what? Help!
@BCABearings2 жыл бұрын
Hi Edwin- I ran this by our product tech team. What we recommend in this situation is to bring this vehicle to a trusted repair shop to ensure it is repaired properly. It is very difficult to properly and permanently repair the wheel speed sensor wiring. Signal loss from repaired wiring can cause issues with ABS, stability control, and other systems, which can lead to further safety issues.
@311mdub3 жыл бұрын
Sensor connector broke from removing bearing, can I just splice the wires together?
@BCABearings3 жыл бұрын
We do not recommend splicing the wires for the wheel speed sensor.
@dancar022 жыл бұрын
Where does the wire harness connects to? VW 2016 Passat.Help please.
@BCABearings2 жыл бұрын
Hi Daniel- Are you asking where the wheel speed sensor wiring connects to the main vehicle wiring harness?
@dancar022 жыл бұрын
@@BCABearings how tdo you connect the new harness to the existin wires.
@BCABearings2 жыл бұрын
If you are connecting new wheel speed sensor wiring to the existing vehicle wiring harness, it needs to be professionally soldered into the wiring harness, and then meter tested to ensure the proper signal is being transmitted from the wheel speed sensor to the vehicle ECU/ECM. If the signal received from the wheel speed sensor is not correct, it can interfere with the function of the ABS, stability control, etc, which can be a safety issue. We recommend that this type of repair is done by someone with professional experience in soldering and circuit testing.
@dancar022 жыл бұрын
@@BCABearings Thank you for the advise.Can you recommend anyone?
@BCABearings2 жыл бұрын
Hi Daniel, I can’t recommend a specific shop, but any reputable auto repair shop in your area should have the tools and skills to complete this repair for you.
@anothey933 жыл бұрын
My wiring became damaged on the body side of the connection, how do I go about fixing that?
@BCABearings3 жыл бұрын
Hi Anthony- If any part of the wiring on the body side of the wheel speed sensor connector is damaged, we recommend the replacement of that entire piece of the wiring harness. It is very difficult to properly and permanently repair the wiring, and the chances of causing additional issues, such as corrosion and signal loss, are high and could even cause a safety issue down the line.
@anothey932 жыл бұрын
@@BCABearings Thanks for the response! I was thinking I'd have to do that, I'm just having a hard time trying to find out how to do that since the harness eventually goes into the body of the car and can't be seen.
@BCABearings2 жыл бұрын
@@anothey93 We can look into which wiring harness part you would need if you would like to let us know what the year, make & model of the vehicle is, and which wheel the connector goes to. Feel free to reply with that info and I can run it by our tech support team.
@reginarae75912 жыл бұрын
My cv axle boot cut my wires in half but like the comment above it leads to a body of other wires I have no idea where to begin? Help please TIA!
@BCABearings2 жыл бұрын
@@reginarae7591 What is the year and model of your vehicle?
@cristianpopescu782 жыл бұрын
I hate this parts! Worst ever! It ruins a still good car!