First I have to say that this was an absolutely fantastic restoration. Not only the mechanical but also the more complicated electronic aspects. You sir are a master craftsman. Secondly, I must complement the design and manufacture of this fine tool. It was clearly manufactured in a time where form and function reigned over low cost. I can only imagine what this tool must have cost new. Honest to god ball screw , thrust washers and aluminum castings; not the cheap blow molded crap that floods the market today.

The entire battery making process is the most professional DIY thing I've ever seen in my life

I hope you had as much enjoyment doing that restoration as I did watching you do it. You have a very high level skill set and apply it making what most see as yard sale junk you bring back to life and upgrade even and its always a relaxing journey to go along on so in not so many words I thank you

That's one serious fingers cutter. :)

That battery bank is just so professionally made!!! looks so neat and well put together. But also the restoration is just awesome!!!

Thank you for not saying or showing us how "You were walking in the woods and just happened to *find it under a branch* [freshly cut]. It's the only reason I continued watching, and decided to watch another. Well done from start to finish.

Great video. Wouldn't want my fingers anywhere near that.

Пальце резка хорошая!!! Для хирурга отличный инструмент!!! )

What a wonderful tool. No stupid safeties, just pure productivity

Wow my man. That’s amazing. The battery was a nice touch. Your abilities are impeccable! From trash to treasure.

The internals of the original product looked like a lightsaber to me. Neat video!

I don't know what impresses me more, the great restore and electronic job or that, that little battery powered OLD pruner will cut through such thick branches!!!! Great Job!!!

Just look at this marvel of a battery, such a handsome gadget you've made =) I also loved how well you sharpened the blades, although I'm not sure if you stripped the plating… great job =)

That was fun. Reminds me of the big old electric scissors we had when I was young. Ran on 3 "C" cells. They weren't very practical, but definitely fascinating to me as a kid.

Man is this thing well built. I don't know what I was expecting to see inside but a ball screw was not it. Powerful too!

Thank you for bringing this beauty back to life and not tossing in the bin!

I believe that is the most dangerous thing you have restored. Very effective!

Whoever made this tool was a great creator !👏 congratulations great idea !👍👈

Cool restoration, I enjoy your content. And a couple of additional words for the YT algorithms. Thank you

That was a beautiful tool restoring. Even the battery build was fascinating to watch 👍🏼

1:36 OMG its her caviar great nature of electric pruning shears are stunning

Can pretty safely say this was an expensive tool when new, seems very good quality. Great restoration!

oh wow, this has got to be the cleanest footage of a sandblasting I've ever seen - kudos!

Wonderful Restoration! God Bless your talent! Keep up good work!

Thank for video, good work! some tips: 1- use masking tape for non-colored areas (spray color can't resist acetone, so it is included in pattex (ruber) glue. 2- screw and pin grease /oil before assembly

Very well done. They’re a high quality pair of cutters that will last many years. I have a pair of Bosch cordless cutters and they won’t go through branches as thick as the ones you were cutting. Cheers Stuart 🇦🇺

No new parts except for the battery and connections, amazing.

Красавчик! Сделал как новый! Всё профессионально!

Great restoration of the Finger Remover 1970!

My God saves you. What creative tool have never seen before l love it .lhope to have one's own personal but my age about end .thanks to you.

Project turned out very nice. 👍 love how you kept all the original parts. Very enjoyable.

Absolutely mad skills my friend incredible restoration and I’ll bet you it’s better than it was when it was new keep up the good work and great videos but once again absolutely mad skills!

I like the battery power pack and looks professional design and the cutter is simply heavy to cut

I always like to see before bed greetings from Paraguay

Wow amazing video 👍👍👍❤❤❤❤

wow this is overall very professionally done. impressive skills and great build. very useful tool for a basket weaver or vineyard

Incredibile how you master all the technique, great job!

that is the coolest pair of scissors i have ever seen. perfect for cutting peoples fingers off

Nvedo il motivo x non essere cortesi, dopo gli sforzi fatti per offrirci questi magnifico servizii, complimenti sinceri da uomo di 84 anni, continuate cisì e buona fortuna!

That's a absolutely incredible resterlason a great talent brilliant job well done to you

Great restoration and I’m surprised you don’t have an ultrasonic bath.

Все прекрасно, кроме заточки. Верхний рабочий нож должен иметь подвод только с одной стороны, именно с той где есть спуск. Вторая сторона идеально плоская, иначе в скором времени этот секатор будет зажевывать ветки.

Класс. Вот с таким прибором здорово работать

Very good for gardening

YOUR BUILD IS PERFECT

👍😀 Ottimo lavoro. Ciao grazie

Wow a proper ball screw. Nice! One of those cheap sonic tooth brushes works really good for cleaning parts. They run off of a single AAA battery.

Береги пальцы, Сеня!

Koga znaes i koga si kreativen , se drugo izgleda mnogu lesno! Cestitam , dobra rabota !

Brilliant restoration, well done!

Great Job 👍👍👍 Great Video 👍👍👍 Great Channel 👍👍👍

when there is more than one bolt never fully unscrew and remove one before unscrew them all slightly unscrew them all then remove them so you won't end up with a tight screw

Nice restoration, but it would have been better if some explanations where added

Excellent restoration 👍👍👍Thanks for sharing

Комментарий в поддержку канала и ролика, а также труда мастера.

Excellent Work!

Excellent job 👍

Love the spot welder so cool !!

Great! now you have your christmas present.

Very nice and fine work! Thanks.. if a suggestion is allowed, maybe you should heat and bathe in oil (maybe also wd40 could be ok) the blued parts.. otherwise I'm afraid they will get rusty in short.. especially for these tools to be used outdoor :) Thanks again for the video!

That's amazing! Are you going to put a belt loop on the battery pack, or just put it in a sling bag or something while working?

Wow. Would have never expected a ballscrew in there. Amazing design actually.

Why must you make everything you do look easy lol. You inspire me to fix more stuff. As a kid I used to take things apart just to see how they worked, or fix stuff Similar to this. But you make you look so easy. Wth lol. Amazing job buddy, I'm glad to have found your channel

Perfect restoration . 👍👍

Ну, мы русские просветлённые в этой теме, нам уже всё показал Дью

Good job ❤❤❤👍👍👍👏👏👏

Niiice! Just bought modern 16v pair. Excellent bit of kit

making that battery was very impressive

Those shears looked much older than i thought from the patina, but it cannot be that old given the brushless motor. Then again maybe brushless cordless power tools dident reach sweden until a few years ago.

Congratulations for you. Mas que essa ferramenta pro cara perder a bica do dedo , e top.

so convenient thanks for sharing

GOSTEI MUITO DO SEU VÍDEO A NOTA É TOP 1OOO PARABÉNS 🕵🏻‍♀️😁🤝👍🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷

Good working

Sand blasting is such a sexy thing isnt it 😂 I could watch it for days.

Awesome job

Great restoration...well done. I hope it wasn't given the finger test...chop chop. 😂 😂 😂

simply...the best....👍👍👍

Enjoyed this video, thanks.

Good job but I was hoping to see it cut through heavy cable or rebar or something as opposed to twigs. Thanks anyway.

Thank you for this video, i have a quick question, at 14:06 you applied a liquid to the now cleaned and prepped bolts and cogs, what was that liquid and what is the purpose other than coloration? I assume it is some sort of protectant?

Restoration of the clippers, or how to make a battery pack? Thanks for sharing. 👍😁🇨🇱🇺🇸

The Best work

Nice work on the cutters now that you cut all that little bit of word I hope you got a small fireplace to burn it in. LOL

What a nice tool

Very good video Good job

Waste not, want not…excellent

Nice work

The battery box could use something to clip it on your belt or waist so you don't have to carry it around.

Interesting to see it has a ball screw, I've only seen those on metal cutting CNC machines

Very cool well done.

Excellent job 👏 👍

A little tape on the areas you don't want paint and you can avoid scraping off the paint later. Also how are you gonna charge your power bank? 🤔

It’s like it’s brand new lol now put that thing on the market lol

Exelente trabajo te felicito un saludo desde la ciudad de México

Good job

great dear

that thumb looks flexible

Сардельки держите подальше, чтобы на пяточки не покромсали))

Blimey you’re clever man

pretty good, but its a bit sad to see some of the color already fading in the finished product. Plus, the plastic trigger guard did not get any love at all.