Рет қаралды 18,971
Originally recorded June 29, 2017.
This video shows how to replace the Manual Air Relief (MAR) Valve on a Hayward Pro-Grid DE filter. It is a fairly simple process. You'll need a screwdriver (flat), and a strap wrench. If you don't have a strap wrench, you can use a very big pair of pliers on the flats on the sides of the Manual Air Relief Valve. You may also need an open-end wrench for the gauge in the MAR.
The Valve is held in bayonet-style, it's a quarter turn to unlock, lift out the old assembly. Replace the o-ring on top of the filter, lube it up, as well as the o-ring on the new valve, and push the new one down, quarter turn to lock.
It's also a great idea to not only backwash your filter FIRST before starting, but to remove the bung at the bottom of the filter, this will allow old DE and other detritus to drain out. While the MAR is removed, you might want to take the opportunity to use the hose to spray down the inside of the filter.