Replace serpentine belt for Mercedes e320, even other cars as well, without using any special tools but just a wheal spanner and or screw driver/anything hard. ONE PERSON can do this in 5mins, even ladies.
Пікірлер: 207
@lioncaptdanieltang25093 жыл бұрын
Thank you.I did something like that 3 hours ago. One extra I did was a wire pull the belt upward and A SCREW driver to flip it and a bar to jack the tensioner, hard though.......managed to changed the belt. Amigo.
@timothyockhuizen7339 Жыл бұрын
This is a quite effective trick given you have enough working room. It is rather not so straight forward on most car models; especially if you have little to no working room.
@CthulhuOO76 жыл бұрын
Never saw the end because I shot myself in the face.
@Zachhwithanhnotak5 жыл бұрын
Good.
@koshnaranek23175 жыл бұрын
I didn't even make it halfway thru the vid.😋
@TylerShowers4 жыл бұрын
God I couldn't stand to listen to that
@rscrevolutionkrypton5130 Жыл бұрын
I'm more impressed that you were still able to write a comment
@DiscoGemini11 ай бұрын
😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
@waynejenkins17885 жыл бұрын
“Just scoop” just scoop it up.... fml
@lascellesgreenwood59374 жыл бұрын
Wayne Jenkins lmfaooo
@alexishoneyyy35784 жыл бұрын
Wayne Jenkins 😂😂
@iseeyou33476 жыл бұрын
your pulley is broken
@AngelMike707 Жыл бұрын
Thank you Lyn; Thanks to you last evening I got my alternator belt on. event dough after losing my tensioner screw all the way, I still couldn't put my belt on just by using my hands. ( In my case I changed my alternator on a Dodge Stratus Rt 3.0) (This kind of cars has a tensioner screw ) Thank you very much again and Blessings!
@marissat51892 жыл бұрын
Thanks for the hack!! Totally helped us 😄🙌
@algrayson89656 жыл бұрын
Original FoMoCo Poly-V belt broke at 55,000 mi. Ford dealers didn't have any in stock. AutoZone, Advance, O'Reilly's, NAPA, Bumper to Bumper didn't have one. AZ actually had one by size but not by application! Installed it w/o the special tools. Regular socket (18mm) wouldn't go in. Got a through socket set at Harbor Freight for $20 shorty socket just barely fit! Turned the crank while guiding the belt onto the generator (slang: "alternator") pulley by main force. No guiding tools, no sandpaper tricks.
@Michaelcarlgadwah Жыл бұрын
My brain blew up midway
@930media6 Жыл бұрын
Thanks for the info!!. This method worked for me on my Kia Soul
@SonnySideInc23 күн бұрын
It gives me hope that I can do my belt, I have no breaker bar and can't move the tensioner, it's a different set up for the belt, but I'll use the new water pump I installed as leverage 😂
@deseremere5 жыл бұрын
Your friendly certified Mercedes dealer in El Salitre , Jalisco, Mexico is running 50% off this week
@prospectorproductions5 жыл бұрын
Somebody gonna learn to do something on youtube today...classic
@JewelsKilya_5184 жыл бұрын
Lol I'm somebody today 🤣🤞😁
@izzawigsis53312 жыл бұрын
Yes, I am
@GarnettM6 жыл бұрын
I hope you changed the Water pump before starting it ,Bearings are shot , PS you can do the ssme thing at the idler .
@roryc63907 жыл бұрын
Wow look at the play in the water pump and the broken jockey wheel that's why the belt came off in the first place lol
@grease_queendockery1483 жыл бұрын
my first thoughts too lol
@mandywomack11293 ай бұрын
And looks like they have a leak somewhere as well freaking crazy how dumb people can be if there is not the right tension the belt they will run into all sorts of problems I mean wow!!
@joesmith65245 жыл бұрын
with that space i could do that belt in 5 mins , try a hyundai sonata 2.4 real tight!
@mr.bobody44866 жыл бұрын
Maybe for this model car. A lot of other cars don't have the space to do this. Obscured by the body of the car or other parts.
@saradeyo94345 жыл бұрын
Yesss sideways motors🙄🙄
@Akx25152 жыл бұрын
THANK YOU. I wanted to punch myself in the face after watching this.
@pagesk20016 жыл бұрын
Why didn't you use the lug wrench, to release the tension on the belt tensioner, I believe they are both 17 mm?
@randomdudeontheinternet99265 жыл бұрын
broken pully and waterpump. No wonder she did not have to release the tension pully.
@SamSung-et9ql5 жыл бұрын
I looove her accent😚😚😚
@podruznik14 жыл бұрын
TO ALL OF US WHO WATCH THIS VIDEO ..SHE DID EXCELLENT JOB WITH BULL..S,,, VIDEO LIKE THIS PEOPLE GET PAY FOR POSTING VIDEO LOOK THE RESPONSE 273,300 VIEWS AND KEEP GOING UP NOT SO BAD GIRL I THINK YOU FOOL US ALL LOL THIS VIDEO WORKS AT LEST FOR HER LOL
@JadedGameTheory6 жыл бұрын
How to ruin a new belt: a tutorial
@MsterLewis Жыл бұрын
He hatin !!
@sethc7585 жыл бұрын
Yeah that's a good way to warp a pulley or harmonic balancer real quick.
@latoshastanfield55236 жыл бұрын
Thank you
@mayorprobank13 күн бұрын
Thank you so much! You saved my butt big time! 🙏🩵
@jeffn13842 жыл бұрын
It worked for me but I did get the 2 screwdrivers stuck between the belt and the pulley so I left them there for next time. The engine was a little noisy on startup but seems to have settled.
@adictiveadictive10 ай бұрын
Gotta be a joke 😂
@rjaqueline23786 жыл бұрын
How to get the fan clutch off
@zugnonid7 жыл бұрын
That bearing on the water pump is fried. look at all the play at around 2:44. Can't wait to see what tricks are up her sleeve that........... Lady you..... nevermind, don't want to make a novel on everything I see wrong.
@jerryz18467 жыл бұрын
we better not go to her house for Dinner.....lol
@monanddom59333 жыл бұрын
Thank you!
@youtubeuser12045 жыл бұрын
Thank you for showing us how to install the serpentine belt. It saves us money by learning how to do it ourselves.
@catherineoconnell32136 жыл бұрын
The trick is get some else to do it lol!
@toddmcnugget88696 жыл бұрын
See?
@420CEO6 жыл бұрын
Wow just wow.
@lyndahobby2413 Жыл бұрын
Need new Alt - stripped 19mm tensioner nut frm replacing wtr pump month ago-used 3/4 scket & got belt off-replaced Alt & got new tensioner arm -have to Jack engine up to get only 2 tensioner bolts out- I’m in park lot at Starbucks so I want to blow up car now or find a hack to get belt on alt with old stripped nut tensioner arm and have about a nano micro area to work with!
@leeamdagan3311 Жыл бұрын
then you scoop it up, you scoop it up.. this is now the sound playing in my head every time I buy crypto dips 🤣 on a real note I hope noone tries to put their belt on like this unless you're stranded on the side of the road in the middle of nowhere on a sunday.
@camilorojas128311 ай бұрын
Maybe we should ask the question why did it slip off to start with? Maybe that water pump hub dancing in the wind is the issue 😅 fix the water pump fix the problem or get good a putting the belt on with a screw driver lol
@4runner4wd793 жыл бұрын
17mm socket and a breaker bar is all you need to turn the tensioner. It’s not a special tool. Right tool for the right job.
@muhammedk96482 жыл бұрын
Thanks
@BacktoSchoolBus6 жыл бұрын
That was one of the funniest things I have ever seen... and on this edition of crackhead mechanics we watch the crackhead shove a screw driver under a new belt onto a broken pulley and toasted water pump!
@aaa85092 жыл бұрын
Damn I didn't even think of that one. I used a half inch drive wrench and a floor jack.
@brutusbigman8952 Жыл бұрын
How
@aaa8509 Жыл бұрын
@@brutusbigman8952 the tensioner pulley has 1/2in square hole... I used the floor jack and the weight of the to push the pulley into place while I got the pulley on. It worked surprisingly well.
@brutusbigman8952 Жыл бұрын
@@aaa8509 thank u man appreciate it so much
@johnnycage61323 жыл бұрын
That's how you damage all your shit nice job not only will the belt snap off prematurely it's also dangerous👌
@Hollywoood-ivan6 күн бұрын
What a joke, no special tools she says, gotta love her
@lioncaptdanieltang25093 жыл бұрын
Changed the idler pulley. Tensioner pulley was okay.
@HarmanMotorWorks3 жыл бұрын
Just keep a ring spanner in the car which matches the auto tensioner pulley bolt size. That way you just use that spanner to crank the tensioner loose as required whenever you like
@aaa85092 жыл бұрын
I live in a tiny town were even told like that are rarely for sale. You can order them online but with current B's that takes months. I used a floor jack as a third arm.
@pingpong9656 Жыл бұрын
I think you broke the top idler pulley - looks like it's missing a bit chunk.
@DiscoGemini11 ай бұрын
Not sure if it was the idler pulley but yeah...definitely looks broken.
@njoy514 жыл бұрын
scopitup .. way to the G-spot
@luhskippy91612 жыл бұрын
Lemme try Hollup
@ronniewilliams87996 жыл бұрын
Black bird singing in the dead of the night reggae song
@ninaray4479 Жыл бұрын
Hmmmmm guess I'm in trouble huh??? Gotta do it myself awwww... just see me cry...
@jaredconstable19304 жыл бұрын
Best part of video 3.15
@golvellius68553 жыл бұрын
Did you used tools?
@harlangarza32093 жыл бұрын
When they say I know a mechanic just fucked that mans Mercedes
@Dave-qy1fn6 жыл бұрын
Lol lol lol.. oh yes I've enjoyed the video alright.
@scottgin5 жыл бұрын
Isee,that's how you gonna stuck in the traffic.
@captaingrizzly56986 жыл бұрын
Scoop it up scoop it up scoop it up.... scoop scoop ......scoop it up scoop it up scoop it up .... no tools....
@amritbhogta93415 жыл бұрын
Plzz help Brother... How many belt size... Say now..
@amritbhogta93415 жыл бұрын
Number size
@quentingolden64072 жыл бұрын
The real help rn would be removing belt without the tool. Putting it on is easy
@Akx25152 жыл бұрын
I disagree. Cut the bad belt off. Putting it on has taken me hours
@qbanchk3 Жыл бұрын
As a woman learning to do her own mechanics, I fully support women in videos. But holy fxck! He needs to keep her out his videos. I don’t care, divorce her ass if ya need to. But I came into this video hoping to put my belt on, half way through I was so annoyed distracted and confused I couldn’t remember what the video was about 😂
@NATAhomez6 жыл бұрын
Holy shit water pump is screwed idler pully is cracked no wonder the belt snapped omg
@godthesonhasilluminatedme4 жыл бұрын
Good job...will try that way
@martinpicazo92606 жыл бұрын
no tools?
@bossman62907 ай бұрын
My brain hurts
@defafa92493 ай бұрын
Am more concerned about the people in the comments not mentioning the broken water pump pulley that is making it easy to put the belt on without a tool
@harlangarza32093 жыл бұрын
Scoop it up
@MrAnthonyC132 жыл бұрын
You're worried about a serpentine belt, when your water pump pulley is shot. Lol. Fix that with no tools
@natescott9413 жыл бұрын
Where I come from, we call this "Nag-splaining"... oh, and corner-cutting. I usually just stop what I am doing and hand the tools to the "nag" in question and say, "fine, its so easy, go ahead, I'ma get me a beer now."
@westvalleyliving76325 жыл бұрын
The idler pulley is chipped and the water pump is fucked, do shit the right way
@DiscoGemini11 ай бұрын
That tensior looks super loose and it appears to be damaged.
@Tonycutshair4 жыл бұрын
Doesn't cardi B have enough money to just pay someone to fix her car tho??
@maniacalmonster22933 жыл бұрын
My o my sure would be lovely to have that much room to work with. Holy hell. I have not even finger width room to work with. You can fit a damn bathtub in all that space.
@flyer95443 жыл бұрын
Yeah... That's a tutorial in how to fuck it up
@saradeyo94345 жыл бұрын
I think they used a tore up car for demonstration purposes maybe?
@greencable2222 Жыл бұрын
if you depress the belt tensioner, no need for tight fit
@tiberiusclaudiusnerogermanicis Жыл бұрын
I know 😂😂😅.. I mean.. tensioner but she's installing it like a stretch belt. Wheres the need for "special tools" 😂
@judahanderson39066 жыл бұрын
I partly disagree with all the commenters below I thought it was a great video, but I also could not get through the half of it... it's such a terrible video, "...heres the best part" 😂
@toddmcnugget88696 жыл бұрын
I found that the lady in the video has more balls than the pussies in comments. At least she tried. The video made me smile, good entertainment.
@Subjohny6 жыл бұрын
Ain't your mama told ya...
@Visionery15 жыл бұрын
You must be very experienced doing this, I can't see the belt lasting very long after being abused like that. There's only one way to do this job, that's the right way... this isn't it.
@savannahhewitt42902 жыл бұрын
Saving money on labor we can buy as many belts we want 🤣
@shaneomac50742 жыл бұрын
What? Serpentine belts handle the pressure of an engine, I guarantee you’re not gonna hurt one unless you really try to
@bigbosssauce72 жыл бұрын
Just use the tensioner? Everyone on the planet has a socket wrench
@rogerjaywinters7737 жыл бұрын
Exactly how Mercedes intended
@zugnonid7 жыл бұрын
Roger Winters 3:03 says it all lol. I work on euro cars all the time and this makes me cringe.
@rogerjaywinters7737 жыл бұрын
Douglas Zugnoni we'd be friends in real life.
@carlmichaelqqchildress56816 жыл бұрын
Roger Winters replace a power steering pump on a Windstar 98
@carlmichaelqqchildress56816 жыл бұрын
how to replace a power steering pump on a 98 Windstar Ford
@carlmichaelqqchildress56816 жыл бұрын
replace power steering pump on a Windstar Ford 98
@Akx25152 жыл бұрын
Yea this is great & all but my car doesn’t have that much room to maneuver a screw driver, barely even a small socket between the pulley & the wheel well/overflow. There’s no way this will work on my Camry. Sad day.
@ericgerrard96802 ай бұрын
U need a another pulley broke at bottom
@jessejames33532 жыл бұрын
Put everything else good
@malgee84692 жыл бұрын
Here's the trick
@aamirkhan0070080095 жыл бұрын
foxtrot uniform
@tankgirl93242 ай бұрын
🤡
@howardharris52383 жыл бұрын
nO tOoLS, No ToOlS.
@Jayytype216 жыл бұрын
Broken water pump
@cassieharris51954 жыл бұрын
Omggggggggaaaaaa shut up for a sec
@luv2jive6 жыл бұрын
oh help me lord jezus ! Where do these peeps come from??!!
@grosswerks20576 жыл бұрын
SERIOUSLY! THIS IS EXACTLY HOW NOT! TO DO THIS ! WTF?
@JOSERAMIREZ-vw5ou2 жыл бұрын
🤗
@thaddeauscaldwell71015 жыл бұрын
First thing I noticed was the broken plastic pulley and then prying the belt on the pulleys and then the bad waterpump and I thought OMG. The name if this video should be "This is how not to put on a serpentine belt ". Some people want the Mercedes but cant afford to have them maintained properly , so they have to do the best they can , to get by . I'm thinking that they didn't know how to loosen the tensioner ; it would have been a lot easier and then been adjusted correctly.
@absoluteunltd24466 жыл бұрын
Probably should be Listed as an EMERGENCY FIX when you absolutely have to do it that way due to not having the right tools to do it properly.
@JRealShawtyVevo6 жыл бұрын
You didn't even start the car up how we even know it work
@malgee84692 жыл бұрын
Lmao 🤣
@leeenglish6176 Жыл бұрын
Not all videos are good for some people.
@josephcantrell2 ай бұрын
Woman click baited me with using no special tools yet the whole time she is using tools ..smh