Replace Wheel Bearings - Toyota Hilux 1999

Рет қаралды 63,685

TEKNOFIED

3 жыл бұрын

www.buymeacoffee.com/TEKNOFIED
#toyota #hilux #teknofied

Пікірлер: 46

@buckjohnson6244 2 жыл бұрын

Excellent vid. Straight forward, no bs. Thanks mate

@jarrodcamilleri6790 Жыл бұрын

Excellent video mate easy steps to follow

@cobba3494 2 жыл бұрын

Thanks for the tip to remove the sleeves! I had been using a rubber mallet which took way longer

@lorenzocuzman7778 Жыл бұрын

Cheers mate! This is what I was looking for gonna give the old luxi a helping hand 👍🏼👍🏼

@TEKNOFIED Жыл бұрын

No problem 👍Glad is was helpful.

@JaseC80 3 жыл бұрын

Brilliant vid thankyou! I have the same model Hilux.

@derekarcher8495 2 жыл бұрын

Great vid mate. Nice and straightforward, unlike the damn manual! Thanks heaps, will tackle this next weekend!

@TEKNOFIED 2 жыл бұрын

Happy to help.

@kalaikauai808 2 жыл бұрын

Thanks for sharing your knowledge 🙏

@badassbmonkey Жыл бұрын

Cheers mate, looks easy enough.. wouldn't have attempted it without your vid 👍🏻

@TEKNOFIED Жыл бұрын

Cheers mate, It is simple enough. Remember to take photo's when not sure. Life happens & sometimes jobs get put on hold. Good luck.

@thanachaichongwong4993 2 жыл бұрын

Thank you so much very nice vedeo

@davetaf1323 2 жыл бұрын

Excellent video ....gonna save me a buck !

@TEKNOFIED 2 жыл бұрын

Glad I could help

@God-fire 7 күн бұрын

Thank you for the lesson

@TEKNOFIED 5 күн бұрын

Your very welcome.

@isabellerankin3399 3 жыл бұрын

Thanks for sharing this

@TEKNOFIED 3 жыл бұрын

My pleasure

@TravMaroskeRacing 5 ай бұрын

Thanks

@redbeastie6061 3 жыл бұрын

Now I know... real diy is best diy

@chuenengyang3685 2 жыл бұрын

It helps me to replace mine.

@LewisYakas-ge7hq 9 ай бұрын

Mean bro

@brianbiggs9697 3 жыл бұрын

Bonza mate, very succinct, great vid and many thanks. Drum brakes on same model please, mine are binding , possible cable linkage, just failed MOT.

@TEKNOFIED 2 жыл бұрын

This vehical belongs to my good friends son. Any problems he has that I work on I will be sure to make a clip about. It is his work vehical tho.

@nicholasrohland7194 4 ай бұрын

no checking pre-load?

@carlo1372xt Жыл бұрын

Gracias .-

@TEKNOFIED Жыл бұрын

Your very welcome.

@geelux180 6 ай бұрын

Got any tips for loosening the 52mm nut without a 52mm socket if its tight? Im planning on doing my bearings. But i reckon my ones are both going to be tight.

@TEKNOFIED 6 ай бұрын

First Sock it overnight with Auto trans fluid to help penitrate the thread. You could use a plummers tool or use a chisel with a 2 pound sledge hammer. I know buying a 52mm socket for a once off job it very costly but you are better off getting the right tool for the job.

@KevinPDunn Жыл бұрын

What if I was less liberal with replacing the old grease? Didnt put as much new grease in as I took out?

@TEKNOFIED Жыл бұрын

You really do need to repack the bearings and replace as much old with new as you can and put in a good amount. It will be the difference between how soon you will be replacing the bearing again. Instead of 10 years maybe 2 years.

@jordanpulvirenti7769 7 ай бұрын

Hey mate do you know how tight the axle bolt should be (the one you removed with the rattle gun at the start)?

@TEKNOFIED 7 ай бұрын

I don't know the torque specs. I go by feel unless I am doing a head gasket. cheers

@chubeye1187 2 жыл бұрын

Seems to jump the tapping of the bolts to the assembly is removed 😜 I managed to get mine off with a bit of prying as well. Nothing compared to the butcher who had changed my ball joint a few years ago. I will be having words now I seen what they did

@joshd2013 8 ай бұрын

Is there two bearings that go into it i just got a front wheel bearing kit for my 1999 ln167 and ive got two different bearings in it

@TEKNOFIED 8 ай бұрын

Yes, Both sides. In the clip you can see I removed a seal to remove the bearing on the inner side. Cheers

@kyledobbie1679 6 ай бұрын

Heyy mate having a bit of trouble getting the locking hub back on and lined up any suggestions??

@TEKNOFIED 6 ай бұрын

You need to turn the locking hub on as it goes in. If it isn't lining up and going on keep trying one tooth over until it goes all the way in.

@craigd123 2 жыл бұрын

Do you have to replace gaskets on the hub lock thing?

@TEKNOFIED 2 жыл бұрын

There was no old gasket that came off neither was there a new one in the bearing kit.

@craigd123 2 жыл бұрын

@@TEKNOFIED you should buy them. They are only 80c each at Repco. Keeps the water out

@boxhead7180 7 ай бұрын

Occy is short for octopus strap. Jockeys are short so the horses don't have to carry too much weight....

@TEKNOFIED 7 ай бұрын

Elastic Strap, Bungee strap, Jockey Strap, Occy strap, Tie Down strap. An item called by many names. I wonder if they are called something else.

@angusmcardle9237 Ай бұрын

Got it all sorted noticed a couple of things though my spindle from the cv had a little play in it and there was no screw in the end of it is that normal?

@TEKNOFIED Ай бұрын

Yes a little play is normal.

@angusmcardle9237 Ай бұрын

@@TEKNOFIED sweet cheers