I live in MN. Ordered the whole motor and cable assembly (had clips and everything) online from Jim White Honda out of Ohio. They are a legit Honda dealership but sold the part for a couple hundred less than the dealership near me. After tax and shipping it was $422. None of the auto stores near me had this exact part or even just an aftermarket equivalent. I verified with Honda per my VIN, the part number I need. There have been some recalls and I didn't want to buy someone's used crap recalled part. Solid instructions though. Helped a lot. Thanks! The job would have been a little over $2k at the dealership, so getting it done for less than 1/4 of that is nice. And really in about as much time since I don't have to mess around with dropping the car off and picking up some other time.
@con_Auto5 ай бұрын
Glad you were able to fix it yourself! Thanks for the comment
@patokeefe54899 ай бұрын
To the maker of this repair video, Thank you very much for your instruction, accurate and very to the point. Now I can do the job. Thanks again.
@con_Auto9 ай бұрын
That was me. Thanks for the comment!
@WojtekKowalski-i2qАй бұрын
Excellent video. Thank you for getting to the point.
@christophercrawford28836 ай бұрын
You saved me $1k or probably more. They wanted $200 just to look at it!
@con_Auto6 ай бұрын
That’s why I made this channel to help people save money who are willing to do things on their own! Glad to hear! 👍
@mikejordan42257 ай бұрын
Thanks a lot just replace my sliding door motor in today great video again keep doing a good job on the videos
@con_Auto7 ай бұрын
Glad to help!
@dmitryk62338 ай бұрын
Fantastic! I'm specializing in Honda sliding doors repair, but I do only 3rd and 4th gen (2005-2010 and 2011-2017) Now someone asked me to fix 2019. This video is very informative. Seems the job is even easier on this one comparing to 4th gen (3rd gen is the the worst). Now I need to figure out how to fix the cable motor. Thanks, man!
@robertobracamontes83087 ай бұрын
i have a quick question does this video apply for the 2010 model or is there different steps i have to take
@con_Auto7 ай бұрын
@robertobracamontes8308 there are different steps for a 2010
@robertobracamontes83087 ай бұрын
@@con_Auto darn i have a job for one tomorrow i don’t see much information on it on youtube
@con_Auto7 ай бұрын
@robertobracamontes8308 the procedure high level is similar but there are major differences
@mikejordan42258 ай бұрын
great video keep doing a good job -i need to replace mine soon
@con_Auto8 ай бұрын
You can do it!
@jessicahellar3238 ай бұрын
Have you been able to find where to order the actual motor and cable? Honda wants to charge me $1,200 to fix my door
@con_Auto8 ай бұрын
The motor and cable are one piece. I got the part from my local honda dealer. Suggest using oem parts as they last longer and have no issues after installing.
@jesusramos16172 ай бұрын
What’s the part number?
@gauge_silvers3 ай бұрын
Heads up guys on the right side you have to loosen the rear evaporator housing to access the rear bolts
@latesja225110 ай бұрын
Can you post the link for the new parts where you ordered them.
@con_Auto10 ай бұрын
I got the parts from the dealership. Just tell them Slide door motor
@garygerber252 ай бұрын
Hey can you help with a video on how to open the door my latch won’t open and door is stuck ! I don’t know if i need to the the motor or something with the latch i have a 2018 odyssey touring!
@abiol15425 ай бұрын
Thanks for the video. After fixing mine, the door closes and stay closed but the back of the door won't close all the way except I push it in. Any advice ?
@con_Auto5 ай бұрын
The door alignment may be off. I am not sure I haven’t had a problem like that before
@pc610626 күн бұрын
Hi, what model year is this Odyssey? Thanks!
@con_Auto25 күн бұрын
2018
@therichardbarrett Жыл бұрын
What year is this?
@con_Auto Жыл бұрын
2018 Honda Odyssey
@jerryfloyd29042 ай бұрын
Hey buddy I don't know how to message you but however I was going to see if you would have ever replace the sunroof motor in this car? I'm trying to get the headliner down in the front and I can't get it down because the two lights and the sunroof operator in the front will not pop down after I take out the two Phillips screws I'm stuck at this point by the way I figured out all the motors that operate the windows add this car have three screws mounting the motor to the regulator Honda did not put any threadlocker on these little bolts and they have caused a problem I have took all my window regulators out of all the windows on this van just like this one and put those three screws back in with threadlocker and torque them down and they all work perfectly now. I'm trying to get to the sunroof one because it melts the motor of the same way and I can't get the headliner down.
@jerryfloyd29042 ай бұрын
In the front
@con_Auto2 ай бұрын
You need to remove the overhead handles and the sunvisors for the headliner to come down. Be careful as the headliner can easily become creased. Let me know if this helps you out.
@jerryfloyd29042 ай бұрын
Will do the problem I'm having is getting the light s and switches in the middle to coome down after I take out the two Phillips screws I'm stuck there I thought maybe I would be able to get a visual on the motor from there
@con_Auto2 ай бұрын
@@jerryfloyd2904 have you removed the cover for the lights? There should be screws under there
@jerryfloyd29042 ай бұрын
I'll give it a try I just hope the whole entire headliner doesn't have to come down lol