Step by step replacement of a below grade basement sewage pump. Part 1 of 3
Пікірлер: 47
@robertfindley9212 ай бұрын
Nice video. I like when you tried to blow dust off the pipe with your mask on. I've replaced 3 or 4 sump pumps, but this is more biological. Wish me luck!
@lorrainebryan75522 жыл бұрын
Hi from Michigan here!! Our pump just went out. So I've been watching videos on how to fix it. NOT that I'm going to do it. But it's nice to know what needs to be done and how to do it.
@jw_nomad5 жыл бұрын
Very clear presentation and video, thanks both of you!
@burtonsbuilds27354 жыл бұрын
Thanks for watching!
@MrWizards19744 жыл бұрын
My son stumbled on this video and asked me to watch It. As a plumber of over 20 years could't believe my eyes when i saw you hit that PVC with sand paper. If a inspector seen you doing that they would make you rip it all out.
@jamzempire4 жыл бұрын
I’m just getting into plumbing. Do you care to tell why that’s not allowed?
@johng8967 Жыл бұрын
It's always a good idea to get a sewage pump that should work for your basin. A big pump in a small basin can short cycling.
@theresad69905 жыл бұрын
Thanks for this video! I know this is an older video but I just found it at the perfect time. My pump just died and I'm trying to figure out what the next step is for getting it squared away. I appreciate your thorough description of the steps you took in doing all of this. It was a big help!
@burtonsbuilds27355 жыл бұрын
Hi Theresa D. Thank you for the kind words. I'm happy the video was able to help you! I made the video because I really didn't find any that helped me before attempting it myself. Good luck with the rest of your replacement!
@eastwindfarms36713 жыл бұрын
Today is my turn, yay! Thanks for the video.
@Albundy11373Ай бұрын
I’ve never seen anyone clean PVC with sand paper. The primer should soften up the plastic to help it stick together better. I managed real estate and make small repairs for properties but I’ve never replaced a sewage pump before. This job looks dirty. I hope I can do it. 😂
@breeze7875 жыл бұрын
Nice work! I just had to replace the pump on my septic tank I just used the existing piping and wella all done. I was more like swapping the pumps out so I could just use everything else including the 4 floats that my septic system has without any modifications for fit. Thanks for putting this up.
@burtonsbuilds27355 жыл бұрын
Breeze787 great Job! Glad you found the video! Thanks for the comment and for watching!
@wizardi4kids2 жыл бұрын
Ok!! helpful video, and I wished the filming was better focused on the work material details instead of the instructor’s back etc. But overall very nice and helpful.
@StephenNu95 жыл бұрын
At 13:30, you should have gone only with the outside, rubber coupler. An inside coupler will create excess turbulence as the liquid comes up to the lip. That turbulence will dampen the flow of water and increase the work done by the pump, which will reduce the life of the pump.
@burtonsbuilds27355 жыл бұрын
Been working great for 3 years exactly as shown. Thanks for your input and thanks for watching.
@tboneski3809 Жыл бұрын
Check valve should be vertical only.
@Kohler613503 жыл бұрын
think most have them in the pumps but read on your pump if you do this to see if it needs a weep hole. i just got a zoeller sewage pump and it needs one. the reasoning is so that it doesn't get airlocked sitting in the pit.
@ericmurphy87735 жыл бұрын
I am a real plumber and it's hilarious to see stuff customers fuck up when I get there but it's even more funny to watch a video of them doing it you need to stay away from plumbing lol
@burtonsbuilds27354 жыл бұрын
Your comments are helpful...Not Thanks for watching!
@killja420style4 жыл бұрын
He sands the pvc lol. It's not copper
@craigzilla1007 жыл бұрын
Thanks Burton! your video was excellent. Question for you.. My pump went out as well and I noticed because the basement toilet didnt flush. My basin isn't nearly as accessible as yours but I was finally able to get the bolts off the lid. I went to unscrew my check valve (since it's vertical) and water began shooting out of the top, since I dont have a close off valve. Does this mean the basin is filled to the top? Will I have to drain the basin at all to get the pump out, or can I just lift out like you did? Thanks again!
@burtonsbuilds27357 жыл бұрын
craigzilla100 Thanks for the kind complement. If I'm reading what you wrote correctly, the top of the check valve started leaking once you started to take it apart This tells me that your stack (pipe going up) has fluid in it not necessarily your basin. I wouldn't take off the valve off completely. Just remove the bottom. Hopefully the valve will be able to hold off whatever is left in the stack . If not you can let it drain into a bucket. If you removed the bolts to the basin you should find out quickly if the basin is overfilled :-). This does depend if whoever installed it sealed it with silicone or not. Not knowing all the details you should still be able lift the old pump out even if it is filled with waste. just be careful and take your time. I would lay down towels to prevent as much mess as possible. Good luck and feel free to ask me anymore questions you may have.
@williamthompson11595 жыл бұрын
Next time you use channel locks to open the cleaner turn them over they only grip in one direction can tell you are new to using tools
@burtonsbuilds27355 жыл бұрын
Thanks for watching!
@fernandosalgado35895 жыл бұрын
Strap those drains down buddy there loose
@schwinnbiking3 жыл бұрын
I have a rough-in and there is a ejector pipe above but no vent and no hole for vent in the basin. Is vent absolutely needed or?
@johng8967 Жыл бұрын
I would think so, the basin should be air tight so it won't stink up the place, the vent should help with the gas and for the sewage water flow smoothly down to the basin.
@mr.bigbrownbass90896 жыл бұрын
No disrespect, but.... Why would you use 2" pipe only to choke it down to 1 1/2" with an internal coupling..? 2nd.. why do homeowners attemp projects.? To save money ( potentially hundreds in this case).. Only to nickel and dime the parts & material. Causing much aggravation to say the least... 2 foot of pipe instead of a 10 foot stick. Lol..
@adwb30786 жыл бұрын
Mr. Big Brownbass I'm not sure you know what your talking about. Homeowners should always try and fix before hiring "professionals" who will bilk you out of ever nickel and dime. Anyway it has been working flawlessly since installation! No leaks, no backups, no noise, no problems. Thanks for your "informed opinion" and thanks for watching. LOL
@rocketmaam68985 жыл бұрын
Hi! I just found your video 3 years later! Nobody has used the basement bathroom, but the ejector drain overflowed and flooded. Is it possible for the ejector to be receiving waste from some other fixture not in the basement? I was under the impression it's only for the basement bathroom, which is below the main house sewer line. It's got us confused. Also, if we shake the pipe, we can hear a rush of water and the pump work. Thanks!
@burtonsbuilds27355 жыл бұрын
Sounds like maybe your float switch might be bad. Do you have a laundry room downstairs? If so it may be dumping into the sump. Another thought it may be ground water if your sump tank is cracked or just open to the ground. Thanks for watching!
@rocketmaam68985 жыл бұрын
@@burtonsbuilds2735 No, the only other thing is the water softener.
@silverS702 жыл бұрын
@@rocketmaam6898 Does your Central Air Conditioner condensation line go into sewage pit? that could be how water is getting in there.
@rocketmaam68982 жыл бұрын
@@silverS70 I believe it might. It goes to a floor drain, along with the water softener. We suspect the floor drain empties into the sewer ejector pump, but can't be sure of that. Is a floor drain supposed to drain into the sewage pump basin?
@silverS702 жыл бұрын
@@rocketmaam6898 a way to find out is to pour some water down the floor drain and listen to hear if you hear it running into the sump pit.
@chuckkern53455 жыл бұрын
Why would you prime the inside of the pipe when connection is on the outside?
@burtonsbuilds27355 жыл бұрын
You wouldn't unless you being over zealous :-). Thanks for watching.
@michaelcarton32994 жыл бұрын
should have worn a brown sweatshirt ;)
@squirts1 Жыл бұрын
Dont waste your time scuffing/sanding PVC before gluing. It does nothing. The "glue" basically melts the pipes together so a scuffed surface doesn't help you.
@GearGuy6 жыл бұрын
Bad day to wear white!
@adwb30786 жыл бұрын
Eric Hemingway Hahahahaha true.
@vintisingh97615 жыл бұрын
Do not understand why you used an inside coupling to reduce the diameter. Also, why are you blowing on the pipe when you have a face mask on. I guess you wanted to amaze your wife with your diy skills.